Used Bale Opener for sale (9,937)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Gujdpfx Aozp H R Eohajf Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: ready for operation (used), Two Temafa bale opener lines are offered for bale opening, pneumatic conveying of fiber bales and processing of natural and synthetic fibers. 1. Bale opener: 1) Bale opener BÖ-KSP 0347, working width: 1600mm. 2) Rod conveyor table FTRY 0502, length: 5700mm, width: 1600mm. 3) Material extraction hopper, working width: 1600mm, pipe flange: 350mm. 4) AEG extraction fan, type: AM 160 MR 4, power: 11kW, speed: 1450rpm. 2. Bale opener: 1) Bale opener BÖ-KSP with Cleanmaster, working width: 1300mm. 2) Rod conveyor table, length: 5000mm, width: 1260mm. 3) Material diverter for feeding into the CMA or for direct discharge. 4) Cleanmaster (CMA) with infeed, tumbler and time-controlled discharge flap. 5) TV 300 extraction fan and auxiliary extraction fan for cleaning the CMA and for wool room extraction. 6) Control cabinet, year of manufacture: 1999, control system: Siemens S5 with Lauer terminal. Documentation available. The machines are available from April 2027. The machines can be purchased separately. An on-site inspection is possible. Gedpoznx Nkofx Ahaeuf

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Guedpfeimv N Tjx Ahajf

Condition: used, empty load weight: 6,758 kg, maximum load weight: 29,242 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2021, next inspection (TÜV): 02/2027, suspension: air, tire size: 385/65 22.5, Equipment: ABS, | Schmitz SCB S3T, Pallet Box | Tilting Roof, Edscha Cover | 1st Axle Liftable | Tool Box x 2 | Spare Wheel Holder with Tire | Pallet Box | Schmitz Axles with Disc Brakes | Austrian Vehicle | Valid Inspection Report/TÜV until 02/2027 | Varios 2.70-2.90m | Tires 385/65 22.5 | Subject to errors, typos, and prior sale. Gsdpfx Ahezuaznsaouf

Condition: used, empty load weight: 2,615 kg, maximum load weight: 15,385 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2025, loading space length: 6,500 mm, suspension: air, tire size: 385/55 R22,5, Equipment: ABS, | Krone AZP 18 construction material trailer | Krone axles with disc brakes | Spare wheel holder | 2x toolboxes | Loading dimensions: L 6.50 m W 2.48 m | Side wall height: 1.00 m | Tires: 385/55 R22.5 | External stake frame | Adjustable drawbar | Subject to errors, typographical errors and prior sale. Gujdpfszt R Shsx Ahasf

Condition: new, empty load weight: 3,770 kg, maximum load weight: 14,230 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,600 mm, suspension: air, tire size: 385/55 R22,5, Equipment: ABS, | Krone AZP 18 building material trailer | BPW axles with disc brakes | Spare wheel holder | 2x toolbox | Loading dimensions: L 6.50 m W 2.48 m | Side wall height: 1.00 m | Tires: 385/55 R22.5 | Perforated outer frame | Adjustable drawbar Seller: Christopher Glock German/English Mobile: Whatsapp) Mail: christopher. Entire stock at: Hofgasse25, A-4063 Hörsching | Errors, input and pre-sales reserved. | Sale only to commercial customers Guodpfx Asytti Dehaof

Condition: new, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,100 mm, loading space width: 2,480 mm, suspension: air, tire size: 275/70R22,5, Equipment: ABS, | Schwarzmüller Jumbo building materials trailer | BPW axles with disc brakes | Pallet box, 2x stainless steel tool box, | Rear storage compartment 600x400x2.900 | side wall height 1.00m front wall height: 1.40m | loading dimensions: 7.10mx2.48m | aluminum rims XLite | tires 275/70R22.5 twin tires | plastic tarpaulin with rubber bands, | aluminum storage tray and front step bar, | subject to errors, input errors and prior sale. Gedotuwbpspfx Ahasuf

Condition: used, empty load weight: 6,208 kg, maximum load weight: 28,792 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2021, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2021, Equipment: ABS, Tare weight: 6208kg, GVW: 35000kg, DIN EN 12642 (code XL) certificate, Loading area (L W H): 13,620 mm x 2,480 mm x 2,780 mmTyre size: 385/65 R22.5, Loading area volume: 93 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, Toolbox, Spare wheel carrier double, Bolted chassis, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Gujdezt Aqvopfx Ahasf

Condition: used, empty load weight: 6,208 kg, maximum load weight: 28,792 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2021, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2021, Equipment: ABS, Tare weight: 6208kg, GVW: 35000kg, DIN EN 12642 (code XL) certificate, Loading area (L W H): 13,620 mm x 2,480 mm x 2,780 mmTyre size: 385/65 R22.5, Loading area volume: 93 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, Toolbox, Spare wheel carrier double, Bolted chassis, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Guedpfx Aozt Aqpjhaef

Condition: used, empty load weight: 6,208 kg, maximum load weight: 28,792 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2021, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65 R22,5, Year of construction: 2021, Equipment: ABS, Tare weight: 6208kg, GVW: 35000kg, DIN EN 12642 (code XL) certificate, Loading area (L W H): 13,620 mm x 2,480 mm x 2,780 mmTyre size: 385/65 R22.5, Loading area volume: 93 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, Toolbox, Spare wheel carrier double, Bolted chassis, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Gusdpfx Ahezt Aq Aoaof

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, Baling press Presona LP 85 VH2, year of manufacture 2018 Technical data: Manufacturer: Presona Sweden Type: LP 85 VH2 Year of manufacture: 2018 Drive power: 2 x 45 kW Operating hours: 40,350 Effective operating hours: approx. 22,000 Pressing force, pre-press: 28 t Pressing force, main press: 85 t Feed hopper dimensions: 1500 x 1100 mm Bale dimensions: 750 x 1100 mm Bale weight: 450 - 650 kg Guedpfx Ahezulknjajf Theoretical volumetric output: 1200 m³/h Throughput capacity at 30-100 kg/m³: 13-30 t/h Tying: 5-wire vertical, (3-wire horizontal) Oil tank volume: 2000 L Transport dimensions, press: 10400 x 2400 x 2800 mm (L x W x H) Weight: approx. 27,000 kg Materials: Paper, cardboard, PET bottles, film, light waste. Note: The press is in good condition. It has been dismantled from ongoing operation. The following work has been carried out by us: New wear plates in the press channel Complete replacement of seals on the main cylinder Oil filter changed Vertical tying mechanism overhauled and made operational The horizontal tying mechanism is currently not functional. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: good (used), Year of construction: 2017, functionality: fully functional, In stock Baling press HSM, type HL 7009 ST Re, year of manufacture 2017 Technical data: Manufacturer: HSM Type: HL 7009 ST Re Year of manufacture: 2017 Pressing force: 70 t Specific pressing force: 58 N/cm² Guodpezt N Afjfx Ahaof Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Tying: 4-fold horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any possible errors. The offer is non-binding, subject to prior sale and may be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: good (used), Year of construction: 2021, functionality: fully functional, In stock Baling press HSM, type HL 7009 ST/A, year of manufacture 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of manufacture: 2021 Gedpfx Ajzt Nzzshaeuf Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x L) Bale weight: up to 600 kg Tying: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: paper, cardboard, film Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 940 mm, 20 lashing rings each rated at 6 t, 20 lashing brackets each rated at 6 t, 18 lashing holes, 7 central stake pockets, 14 stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, removable Price: €1,500, surcharge for extendable drawbar Price: €1,500, surcharge for 4 warning signs with lighting Price: €800. Also available with loading platform lengths of 8,600 mm, 9,000 mm, or 10,500 mm! -- Subject to misprints, errors, and changes, sample images -- For more data, see: !, More details: ! Gedpfxjztnume Ahasuf

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 235/75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum sideboards, foldable and removable, removable posts, 40 mm wooden floor, 3 post pockets in the center for plug-in posts 80 x 80, 6 tie-down points, outer frame with tie-down eyes, reinforced gearbox support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression, rear, surcharge for front panel grille 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load capacity per pair 8 tons, and 2 x folding supports at the rear, price: 1,900 euros, -- printing errors, errors and changes excepted, sample images --, more data at: !, More Details: ! Gujdpsztnuyefx Ahasf

Condition: new, empty load weight: 3,600 kg, maximum load weight: 8,300 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Drawbar extendable to approx. 3,850 mm, locking positions at approx. 1,000 mm, 2,000 mm, 3,000 mm or 3,850 mm; loaded floor height approx. 800 mm; internal vehicle width approx. 2,530 mm; centrally, 4 stake pockets for 100 x 50 mm plug-in stakes; 8 stake pockets in the outer frame; 4 lashing rings, each rated at 5.3 t; outer frame with lashing eyes; 4 warning panels with lighting; rear plug-in rotating beacon; contour marking and side underrun protection; rear mudguards and spray suppression. -- Subject to printing errors, mistakes and changes; sample images. -- More data at: !, More Details: ! Gedpfxsztnu Ho Ahaeuf

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 980 mm, 20 x lashing eyes each 6 t, 20 x lashing brackets each 6 t, 18 x lashing holes, 7 x stake pockets, central, 14 x stake pockets in the outer frame, 2 pairs of container locks, surcharge for front wall approx. 1,600 mm high, plug-in price: 1,500 ¤, surcharge for extendable drawbar price: 1,500 ¤, surcharge for 4 x warning signs with lighting price: 800 ¤, , Also available in loading area length 8,600 mm!?, , , , , --  Misprints, errors and changes excepted, sample images --, More data at: !, More details: ! Gsdpfx Aeztnugjhaeuf

Condition: new, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum drop-side panels, foldable and removable, 3 central stake pockets for 80 x 80 stakes, removable stakes, 6 lashing eyes, outer frame with lashing points, reinforced transmission support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression at the rear, surcharge for 1,600 mm high front panel grille (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps with a load capacity of 9 tons per pair and 2 x folding supports at the rear, price: 1,900 euros, -- subject to printing errors, errors and changes, sample images --, more details at: ! Gsdjztnutopfx Ahasuf

Condition: used, empty load weight: 2,500 kg, maximum load weight: 8,700 kg, overall weight: 11,200 kg, axle configuration: 2 axles, first registration: 11/2009, suspension: other, tire size: 235/75R17,5 143J, color: other, gearing type: other, front tire size: 235/75R17,5 143J, rear tire size: 235/75R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, Pull-out drawbar, 12 x stanchions, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gusdpfx Aheztnt Njaof

Condition: new, empty load weight: 3,080 kg, maximum load weight: 11,320 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum sideboards, foldable and removable, 3 central stake pockets for 80 x 80 mm stakes, removable stakes, 6 lashing eyes, outer frame with lashing points, reinforced transmission support with load and fast gear, contour marking and side impact protection, fenders and spray suppression at the rear, surcharge for front panel grid 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load capacity per pair 9 tons and 2 x folding supports at the rear, price: 1,900 euros, -- subject to printing errors, errors and changes, sample images --, more data at: !, More details: ! Guedpoztnrxsfx Ahajf

Condition: new, empty load weight: 2,950 kg, maximum load weight: 11,450 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65R17,5, color: other, gearing type: other, front tire size: 205/65R17,5, rear tire size: 205/65R17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum sideboards, foldable and removable, 3 central stake pockets for 80 x 80 mm stakes, removable stakes, 6 lashing eyes, outer frame with lashing points, reinforced transmission support with load and fast gear, contour marking and side impact protection, fenders and spray suppression at the rear, surcharge for front panel grid 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load capacity per pair 9 tons and 2 x folding supports at the rear, price: 1,900 euros, -- subject to printing errors, errors and changes, sample images --, more data at: !, More details: ! Guodpfx Aeztnr Sehaef

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loaded platform height approx. 940 mm, 20 lashing rings at 6 t each, 20 lashing brackets at 6 t each, 18 lashing holes, 7 stake pockets centered, 14 stake pockets in the outer frame, 2 pairs of container locks, Surcharge for front wall approx. 1,600 mm high, plug-in type Price: €1,500; Surcharge for extendable drawbar Price: €1,000; Surcharge for 4 warning panels with lighting Price: €800; Also available with loading area lengths of 8,600 mm, 9,000 mm, or 10,000 mm! -- Subject to errors, misprints, and modifications, sample images -- More data at: !, More Details: ! Gujdpfx Aheztnr Eeaof

Condition: used, empty load weight: 2,500 kg, maximum load weight: 8,700 kg, overall weight: 11,200 kg, axle configuration: 2 axles, first registration: 11/2009, suspension: other, tire size: 235/75R17,5 143J, color: other, gearing type: other, front tire size: 235/75R17,5 143J, rear tire size: 235/75R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, Pull-out drawbar, 12 x stanchions, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Guedpoztnrlsfx Ahaof

Condition: used, empty load weight: 7,046 kg, axle configuration: 3 axles, first registration: 07/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 97 m³, suspension: air, tire size: 385/55 R22,5, wheelbase: 7,700 mm, color: grey, Year of construction: 2018, Equipment: ABS, Tare weight: 7046kg, DIN EN 12642 (code XL) certificate, Loading area (L W H): 13,620 mm x 2,480 mm x 2,900 mmTyre size: 385/55 R22.5, DC 9.5 certificate, Loading area volume: 97 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Electronic Brake System EBS, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Gusdpezrp Tzsfx Ahaef

Condition: used, empty load weight: 6,263 kg, maximum load weight: 32,737 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2022, next inspection (TÜV): 09/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 93 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: grey, Year of construction: 2022, Equipment: ABS, Tare weight: 6263kg, GVW: 39000kg, DIN EN 12642 (code XL) certificate, Loading area (L W H): 13,620 mm x 2,480 mm x 2,780 mmTyre size: 385/65 R22.5, Loading area volume: 93 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Self-levelling suspension, Electronic Brake System EBS, Ferry lashings, Bolted chassis, Sliding roof, Hubodometer, 1x15 and 2x7 pin plug, Antispray, Telematics system, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Guodpfx Ahszuhh Noaef