Used Baljer & Zembrod Wrtg-1-12-1000R for sale (83,331)

Year of construction: 1994, condition: good (used), Baljer Zembrod root reducer with radio remote control Hnjdpfx Absn Skz Tshep

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: cabin, crane, For sale: Baljer&Zembrod timber handling trolley. Year of manufacture: 2000 Hjdpexb A Evsfx Abhjnp Crane type: OBX II Maximum reach: 13.2 m Lifting capacity at maximum reach: 2,200 kg without grapple Air-conditioned operator cabin Power cable wound on reel Track length: approx. 80 m

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Hnsdpfxozf Nbxs Abhop

Condition: used, Year of construction: 2003, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 1663, arm reach: 15,300 mm, load capacity: 2,000 kg, track width: 10,000 mm, Used gantry crane 10 meter track gauge Crane type: OBX IV 15.3 meters Lifting capacity: 2,000 kg at 15 meters without grab Grab: included Crane arrangement: central Cab side: left Power supply: conductor rail Hedeyyldzepfx Abhjnp Power: 45 kW !! Sale on behalf of customer !! Available from summer 2026

Condition: new, Year of construction: 2026, functionality: fully functional, feed rate Y-axis: 45 m/min, working width: 1,100 mm, number of blades: 5, power of feed motor: 22 W, Debarker ZE 1105 Vario For round timber up to 110 cm! In the short wood variant from 1.80 meters log length! Perfect debarking result thanks to pressure adjustment of the knives during operation. All functions are performed hydraulically. Many adjustment options during operation, e.g. via radio remote control. Opening of knives in case of malfunctions at the push of a button. Hodpfsyyv Dfex Abhsnp As a full-service supplier for log yards, we can offer you an individual and non-binding quotation for complete log yard solutions.

Condition: used, Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 15,200 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2003 Machine number: 1658 Track width (m): 3.0 Hedpfxoyglfde Abhenp Crane type: OBX II Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.2 m Grab: included Crane position: in front of the cabin Cabin side: left Saw: 1.3 m Alpha !! Sale on behalf of customer !!

Condition: used, Year of construction: 2018, Overview  Hjdpoyb S S Hofx Abhsnp This isobaric filler was manufactured in 2018 by the German company Leibinger, with the labelling system added in 2020 by ENOS. The system consists of a 12-head isobaric filler with 4-head crown capper, an ENOS C5000 labellier, and auxiliary equipment for packaging. It is designed for beer and other carbonated beverages and offers a complete solution from filling to labelling and carton sealing. The machines are immediately available. Technical data  Leibinger Filling and Capping Machine (2018) - Capacity: Up to 3,000 bottles/hour (330 ml) - Filling system: 12 counterpressure long-tube valves - Capping system: 4-head crown capper (26 mm) - Bottle format: 0.33 L (prepared) - Working pressure: 2.0 – 2.2 bar - Working temperature: 0 – 4 °C (optimal) - Oxygen pickup: 10–12 ppb dissolved oxygen - Vacuum system: Integrated CO₂ pre-evacuation and vacuum pump - Product pump: Included - CIP system: Automatic and programmable - Machine direction: Left to right - Construction: AISI 316L stainless steel - Electrical requirements: 400 V / 3PH+N+PE / 16 A / 50 Hz ENOS C5000 Labelling Line (2020) - Capacity: 2,000 – 6,000 bph - Bottle formats: Cylindrical bottles, max. height 185 mm, max. length 300 mm - Labelling stations: 1 (option for second station) - Label type: Self-adhesive (also supports polypropylene labels) - Bottle infeed: Screw conveyor system - Sensors: Self-adjusting photocell for transparent labels - Control system: Processor board with inverter-based speed regulation - Output system: Smoothing unit with adjustable perforated belt - Transport system: 1.5 m conveyor with traction motor - Rotary tables: 1 infeed + 1 outfeed, both motorized - Electrical control: 3 inverters (for conveyors, labeller, and filler) BEA C26U Semi-Automatic Carton Sealer - Function: Seals top and bottom of cartons - Adjustments: Width and height adjustable - Conveyor: Plastic rollers, 1.5 – 4.5 m  

Condition: ready for operation (used), Year of construction: 2005, operating hours: 40,000 h, machine/vehicle number: 1708, arm reach: 15,550 mm, load capacity: 1,800 kg, track width: 3,000 mm, year of last overhaul: 2020, Equipment: cabin, crane, Well-maintained forestry truck with crane for sale on behalf of a customer: Year of manufacture: 2005 Crane: ESX I, new in 2020 Reach: 15.55 m All-wheel drive Saw: 1.30 m bar length, on the left side Hjdpfxszh Uk Rs Abhenp Track width (m): 3.0 Grapple: included Crane arrangement: in front of the cab Cab side: left

Condition: used, Year of construction: 1984, operating hours: 69,889 h, functionality: fully functional, machine/vehicle number: 620, arm reach: 13,000 mm, load capacity: 1,250 kg, track width: 3,000 mm, Equipment: crane, For sale on behalf of a customer: an RSTW, year of manufacture 1984. It is equipped with a Jonsered crane with a reach of 13 meters. The machine is in good working condition and can be inspected. Hsdpfsy Ry Rqex Abhonp

Condition: used, Year of construction: 2005, operating hours: 27,000 h, functionality: fully functional, working width: 900 mm, number of blades: 5, power of feed motor: 22 W, ZE 905 in good condition. Sale by customer order! Max. pass-through 90 cm. Feed speed 32 m/min. Central lubrication. Regular service always performed. Runs very smoothly and can be inspected in operation. Machine is being replaced by a new one with Variopress system! Hodpfx Aey R Avvebhenp

Condition: used, Year of construction: 2009, operating hours: 20,831 h, functionality: fully functional, arm reach: 15,200 mm, load capacity: 2,000 kg, track width: 3,000 mm, Equipment: cabin, crane, Baljer&Zembrod RUW with OBX IV Crane Machine number: 1795 Track gauge: 3.0 m Crane type: OBX IV Reach: 15.2 m Lifting capacity without grab: 2,000 kg / 15.0 m Hnsdpfxoy Ryglj Abhop Grab: included Crane position: center Cab side: right For complete technical specifications, see the document "Technical Data" !! Sale on behalf of customer !!

Condition: ready for operation (used), Year of construction: 2013, For sale is a Baljer Zembrod OBX V-24 with up to 200m of rail. Hjdpjwxndnjfx Abhsnp

Condition: excellent (used), Baljer & Zembrod roundwood handling, sorting, transport and sawing vehicle - German production - measuring the length of the wood Hedpfx Abjlimrishonp - automatic cutting cycle TECHNICAL PARAMETERS: - max log diameter 1000 mm - crane reach max 9200 mm - crane working angle 225" - rotating head 360 " - lifting capacity: 2000mm - 2560kg 7240mm - 1680kg 9200mm - 1330kg - dimension of the hauler 6000x2150 mm - hauler with two-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic stroke of the guide - manual and automatic operating mode - log lifting - integrated sawdust extraction 2.2 kW - drum for winding the cord Transport dimensions 12.5x2.4x2.4m weight 12000 kg

Condition: used, Year of construction: 1993, operating hours: 47,000 h, functionality: fully functional, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, We offer this used Baljer & Zembrod machine for log yards, year of manufacture 1993. Track width: 3m Crane type: OBX II Lifting capacity without grapple: 1900kg/15.2m Grapple: without Crane position: Rear of cab Cab side: Left Saw: 1.3m Alpha With HEB500 running rail Cutting bench with waste scraper chain Hnodpfjyz Twrsx Abhep If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, Fast root de-sharpening in cross-feed mode 75 kW milling shaft Including hydraulics Hedpfx Aoyyk D Tsbhsnp

Condition: used, Year of construction: 1992, operating hours: 5,093 h, functionality: fully functional, load capacity: 4,000 kg, Equipment: crane, Baljer & Zembrod Sorting Line – 75 m, Operational, Available at Short Notice For sale is a used sorting line from the manufacturer Baljer & Zembrod, model AS/30V-L.D. The system comes from active operation and was decommissioned as part of a planned site relocation. The sorting line is fully functional but shows typical signs of wear consistent with its age. Note: The system was previously reserved and is now available again. Technical Data Model: AS/30V-L.D Year of manufacture: 1992 Operating hours: approx. 5,093 Condition: used, operational Defect: Saw blade is defective Length of crane runway: approx. 75 m Crane runway width: 3 meters Load capacity: 4 tons (see load capacity diagram in the photos) Length of round timber staging: approx. 23.5 m Description The machine is suitable for sorting round timber and was in use until recently. The sorting line has been regularly serviced but, due to its age, is in average visual condition. Hydraulics and electrics function reliably. The saw blade is defective and should be replaced or repaired. Fields of Application Round timber sorting Sawmills Timber processing Biomass and round timber logistics Availability The machine is dismantled and stored outdoors and can be inspected by appointment. Immediate takeover is possible. Hnedeyu U Rljpfx Abhjp Inspection under operating conditions (powered up) is possible until early week 14. Afterwards, the location will be disconnected from the power supply due to new building construction. Further technical details, photos, or a site visit can be provided on request.

Condition: used, Equipment: crane, Baljer & Zembrod, ASX I, slewing ring from Baljer & Zembrod renewed, price 13,000 EUR ex works. Hjdpsxb Upmjfx Abhjnp

Condition: good (used), Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, cutting diameter: 1,500 mm, Equipment: cabin, crane, Baljer&Zembrod OBX II/III Year of manufacture: 2003 Hnjdpfsxpvr Sex Abhsp In daily operation Condition: Well maintained.

Condition: used, mileage: 7,80,505 km, power: 162 kW (220.26 HP), first registration: 06/2013, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: red, gearing type: automatic, emission class: euro5, loading space volume: 33 m³, loading space length: 6,550 mm, loading space width: 2,500 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, parking heater, tail-lift, Vehicle No. for customer inquiries: 243 ----Body: * Manufacturer: Kiesling * Tail lift: BÄR 1,500 kg * Side door on the right side of the body * Fully recessed anchor rails * Fully recessed mounting rails * Fully recessed floor mounting rails * Cool Slide partition for the left compartment * Cargo space dimensions: L: 6,550 mm, W: 2,500 mm, H: 2,070 mm * Compartment width: Compartment 1: 1,577 mm / Compartment 2: 900 mm * Payload: 4,400 kg ----Refrigeration unit: * Thermo King T-1000R * 2-chamber system * 3 evaporators * Suitable for deep-freeze and fresh transport ----Special equipment: * Automatic climate control * Engine brake * Cruise control * Vehicle with maintenance contract until 2018 * Service booklet up to 05/2024 * Rear impact bar * Driver's seat armrest * Audio system: MAN CD 24V radio * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, wide-angle and electrically adjustable and heated, left * Exterior mirrors, wide-angle and electrically adjustable and heated, right * Battery: 155 Ah * Co-driver's seat, comfort, air-suspended * Curb mirror, right, electrically adjustable and heated * Differential lock, rear axle * Driver's seat, comfort, air-suspended * Power windows * Flame start system * Transmission: 6-speed - Type: ZF 6 AS 800 OD, Tipmatic * Sliding roof, mechanical * Rocker arm - EVB brake * Auxiliary heater: Eberspächer D4S * Sun visor, exterior * Power socket in the cab, 12V / 180 W * Central locking ----Standard equipment: * Axle configuration: 4x2 * Front/approach mirrors * Anti-lock braking system (ABS) * Safety belt warning indicator, left * On-board computer: MAN-Tronic * Compressed air connection, front * Electronic braking system: MAN-Brakematic * EURO 5 engine * Cab: C (Compact) * Suspension: Leaf spring / Air * Windshield, tinted * Generator: 28 V, 80 A * Rear axle: HY-0925 * Body/superstructure: Chassis * Fuel filter, heated * Fuel tank: 150 liters * Steering column (steering wheel), adjustable * Raised air intake, dry air filter, lower right * Engine: 4.6 liters - 162 kW, diesel * Engine brake * Radio preparation: 24V * Spare wheel holder behind the rear axle * Disc brake, rear axle * Disc brake, front axle * Mud flaps, front * Side windows, tinted * Stabilizer bar, rear axle * Bumpers, plastic * Door windows, tinted Hsdpjzmbz Tofx Abhenp * Underrun protection, rear * Underrun protection, front * Viscous fan * Front axle: VOK-05, curved * Permissible total weight: 11.99 t ----Technical data: * Wheelbase: 4,500 mm * Cargo space dimensions: L: 6,550 mm, W: 2,500 mm, H: 2,070 mm * Compartment width: Compartment 1: 1,577 mm / Compartment 2: 900 mm * Payload: 4,400 kg * Tire size: 265/70 R17.5 * Tire tread: approx. 20% - 30% ----German vehicle! * €11,900 net, plus VAT * A deposit will be retained for export to third countries or the EU. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly take your used vehicle in part exchange! * Financing/leasing is also possible in difficult cases * This description is for general identification purposes only and does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/images provided are non-binding and do not constitute a guaranteed characteristic.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the plug-in tube: Manufacturer: SSI Schaefer Shelf system: R3000 suitable for KTZR 31036 shelf cross beams Included in delivery: 01x plug-in tube, II. choice (new goods) Material color: galvanized Type: KRA 4170 Total length: approx. 170 mm Useful height: approx. 95 mm TubeØ: approx. 12 mm Weight / pc.: approx. 0,030 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: Hnodpspbvgtefx Abhsp This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), CATALOG NUMBER 7926 TECHNICAL DATA - Working length: 6200 mm - Working width: 150 mm - Working height: 1350 mm - 12 vertical hydraulic cylinders - Dimensions (L/W/H): 6580/1270/2350 mm - Weight: approx. 4000 kg ADVANTAGES Hnjdpfx Aozmfvuebhsp – very good condition – used press – original paint (not repainted) – intended for professional use Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the event of significant exchange rate fluctuations, the price may change)

Condition: ready for operation (used), Bosch UVF 160M / 4B-21S /527 / 55432-1 servomotor, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Hodpfx Absk Ru Dcjhonp

Condition: ready for operation (used), Indramat MAC 090A-0-ZD-4C/110-B-1/WI522LV permanent magnet motor, serial number as shown in the photo. Professionally and completely refurbished and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! Hjdpfx Absi D Ihqjhsnp

Condition: ready for operation (used), Indramat MAC 112D-0-ED-2-C/130-B-1/S005 permanent magnet synchronous motor, serial number: 68352, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional. Scope of supply as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire about the costs for packaging and shipping separately! Hodpoi D Ii Ijfx Abhonp

Condition: used, Year of construction: 2008, Overview  This rinsing–filling–corking triblock was manufactured in 2008 by Spanish company GyM (model Bacchus 12–16–1). It integrates bottle rinsing, atmospheric filling and corking in a compact system suitable for medium-speed wine bottling.  Technical data  - Capacity: - 2,500–2,800 bph - Formats: - Includes 2 bottle format adapters: - Cava & Burgundy - Magnum, Nova, Stylis & Ryn - Rinsing heads: 12 - Filling heads: 16 (atmospheric filling) - Corking heads: 1 - Power supply: - Voltage: 380 V Hnodpfx Aboyb S Sgjhop - Frequency: 50 Hz - Consumption: 4 kW - Operating pressure: - 3–6 bar