Used Barriquandsteriflow Rotary Autoclave 5B for sale (4,462)

Condition: excellent (used), - Compressed air consumption: - Pressure: 6 bar - Consumption per cycle: 24 Nm³ - Required flow rate: 200 Nm³/h - Inlet diameter (mm): - Pipe diameter: 50 mm - Valve diameter: 32 mm - Electricity: - Centrifugal pump power: 15 kW - Hydraulic power for the gate: 3 kW - Gear motor power: 5.5 kW - Process water: - Storage volume: 1,700 dm³ - Make-up water inlet diameter: 50 mm - Make-up water pressure: +3 bar - Discharge diameter: 65 mm - Pump flow rate: 450 m³/h - Heat exchanger: 450 m² Fodpfx Adozbt Szersgf - Consumption may vary depending on the cycle and the temperature before and after sterilization.

Condition: like new (used), Autoclaves are used to sterilize packaged products that require high temperatures (+100°C) to eliminate or inactivate pathogenic microorganisms. Rotary autoclaves: These are used to sterilize products that present greater challenges in heat transfer. Examples include vegetables in whole, grated, or diced form, and beverages such as smoothies, teas, coffees, or evaporated milk. In this type, the basket rotates inside the autoclave, agitating the contents and preventing the pieces closest to the sides of the container from burning. Fgodszbi U Eepfx Adrof Tray dimensions: 600 mm x 400 mm x 100 mm. Total dimensions of the loading cart: 1500 mm x 1400 mm x 820 mm. Dimensions of the static structure (5 trays): 700 mm x 50 mm x 54 mm. INCLUDES: - Pressure pump. - Heat exchanger: - Brand: Barriquand Steriflow - Type: POT DE RECUPERATION.

Condition: like new (used), functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Fedpox Tiliefx Adrogf Rotary autoclaves: These are used to sterilize products that present greater difficulties in heat transmission. Examples include vegetables in grains, grated or diced, and beverages such as milkshakes, teas, coffees, or evaporated milk. In this type, the basket rotates inside the autoclave, stirring the contents and preventing the pieces closest to the sides of the vessel from roasting. Distance between rollers:

Condition: like new (used), Rotary autoclave SURDRY 1 B Fodpjxp Rqvsfx Adrjgf

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: Fedpfx Ajq Nfuzedrogf - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Fgodpfxoq Igyvo Adrof Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: good (used), Table size:1500x1500mm Capacity : 6t Fjdpjfvqmxsfx Adrogf Dimension: 1600x2500x2000mm Hydraulic

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Fgjdpfx Aoyy U Shsdrsf Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: good (used), Revent Single Rack Oven Rotary Rack Oven Complete with one mobile oven rack Fedpfx Adeyw T D Dorsgf In good working condition

Condition: good (used), Poma LS 1300 rotary bookbinding shears Production in Germany. Shears in good condition, ready for production. The construction made entirely of cast iron ensures rigidity and repeatability of cutting. Cutting width approx. 1300mm Ideal for bookbinding cardboard. Side margin. The machine has a feeder. 8 sets of knives Fgsdpjztn S Ssfx Adrof Weight 1500kg

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Fsdpfotrhv Sex Adrsgf Control: CC100 Condition: fully funtional Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Fodswugczepfx Adregf Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Fedpfx Aju Dbkdodrsgf Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, clamping force: 1,800 kN, M025 — Wittmann Battenfeld Wittmann Battenfeld HM 180/350H/210S* (-) CLAMPING UNIT Fsdpfxoy Tn Enj Adrsgf • Clamping force: 180 T • Coining: NO • Max mold weight: - kg • Max mold weight per plate: 700 kg • Size between bars (WxH): 570x520 mm • Min mold height: 355 mm • Max mold height: x mm • Max stroke open: - mm • Centering ring FIX / MOVE: 125 / 125 mm • Fast clamping system: NO MOLD INTERFACE • Heating zones: 12 (24 pin combi TC/PW (6 zones per harting)) • Water cooling circuits: 2+2 • Hydraulic circuits (cores): 3+1 • Hot runner sliders hydraulic (nozzles): x • Hot runner sliders pneumatic: 2+2 INJECTION UNIT • Screw diameter: 35/30 mm • Nozzle face + thread: R14,5+M35x2,0+R14,5+M35x2,0 • Injection unit type: 350H/210S • Screw stroke: - mm • Max injection capacity: - cm³ • Max injection pressure: 2080/2040 Bar • Max injection rate: 159/102 cm³/s • Accumulator SW / HW: NO / NO ⚡ *ELECTRICAL / ROBOT* • Mold ejector clamp: NO • Sockets 400V/16A: 6 • Sockets 400V/32A: 5 • Sockets 400V/63A: 0 • Robot type: Linear • Quick connector gripper: WGS-QLRD Midi • Vacuum ports: 2 • Air pressure ports: 3 • User inputs / outputs: 0 / 0 \+ Rotary table \+ Robot wittmann

Condition: good (used), Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Fgjdpfxowp E Hzs Adref Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Condition: used, Rotary Airlock Feeder, Rotary Feeder – Used Machine Manufacturer: VEM / VEB Elektromotorenwerke Thurm (GDR) Model: ZG3 KMRB 80 G 4 Overall Dimensions: Width: 1210 mm Fjdpfx Adjzrwqnersgf Depth: 380 mm Height: 590 mm Technical Specifications: Motor Power: 1.5 kW Output Speed: 40 rpm Output Torque: 354 Nm Voltage: 220/380 V (Three-phase) Rated Current: 6.2 / 3.6 A Year of Manufacture: 1989

Condition: used, Rotary Airlock Feeder, Rotary Feeder – Used Machine Overall Dimensions: Width: 1780 mm Depth: 410 mm Height: 620 mm Pocket Size: 220 × 100 × 120 mm Number of Pockets: 8 Fedjzqatvopfx Adrsgf Electrical Specifications: Voltage: 400 V Power: 0.75 kW Current: 2.1 A

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Fgsdpfx Adjztm H Iersf Condition: unused

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Fsdpjzp Ilqjfx Adrogf Weight: 1800 kg Engine power: 11 kW

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Fedpfxeztmxqj Adrjgf Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT Bus CNC System, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: 6kW Fiber Laser Source, laser power: 6,000 W, laser wavelength: 1,064 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 16 mm, sheet thickness aluminum (max.): 14 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 8 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 850 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 120 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 30 m/min, cutting speed: 60,000 mm/min, workpiece weight (max.): 1,000 kg, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 9,000 kg, total length: 9,000 mm, total width: 3,400 mm, total height: 2,350 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, # Metal Technics Polska MTP-FL3015R-6KW Enclosed Fiber Laser with Rotary Axis Manufacturer: Metal Technics Polska Model: MTP-FL3015R-6KW Condition: Brand New / Factory New Laser Power: 6kW (6000W MAX Photonics Fiber Laser) Control System: FSCUT Bus CNC Control System Laser Head: Ospri Intelligent Autofocus Cutting Head Working Area (Sheets): 1500 x 3000 mm Tube Processing: 6000 mm length | Round: Fi 20–220 mm | Square: 20x20 to 220x220 mm --- 1. OVERVIEW & CAPABILITIES The MTP-FL3015R-6KW is an industrial fiber laser engineered for high-speed, high-precision processing of sheet metal and structural tubing. Built for demanding production environments across Europe, it combines flat sheet cutting and a 6m pipe rotary axis on a single heavy-duty machine bed. Material Cutting Thickness (6kW): - Carbon Steel: up to 25 mm (O2/N2) - Stainless Steel: up to 16 mm (N2) - Aluminum: up to 14 mm (N2/Air) - Brass: up to 10 mm (N2) --- 2. CORE CONFIGURATION - Laser Source: 6kW MAX Photonics (high photoelectric efficiency, 100k+ hrs life) - Cutting Head: Ospri with dynamic autofocus & thermal-protected water-cooled optics - CNC Software: FSCUT Bus CNC with integrated automatic nesting, fly-cutting & leapfrog motion - Drives & Motion: Inovance bus servo motors & Techmech precision planetary reducers - Transmission: High-precision linear guide rails & helical rack & pinion - Gas Regulation: Aventics proportional valve for automated O2 pressure control - Chiller Unit: Tongfei dual-circuit industrial water chiller - Safety & Fumes: Full protection enclosure with access interlocks + partitioned zone dust & smoke exhaust --- 3. MACHINE DIMENSIONS & TRANSPORT LOGISTICS Assembled Working Footprint: - Length: ~9,000 mm (Main cabin + 6,000 mm rotary bed extension) - Width: ~3,400 mm (Main cabin + electrical cabinet + chuck overhang) - Height: ~2,350 mm - Total Weight: ~9,000 kg Transport / Shipping Dimensions (Dismantled for Mega-Trailer / Container): - Main Machine Bed Unit: ~4,500 x 2,250 x 1,950 mm - Rotary Axis Bed Extension: ~6,200 x 850 x 1,200 mm - Ancillary Skid & Enclosure Panels: Standard crated pallets - Required Gateway/Door Access at Buyer Site: Min. 2,500 (W) x 2,200 (H) mm --- 4. EUROPEAN DELIVERY, WARRANTY & SERVICE - Delivery: Professional logistics arranged across all EU countries & mainland destinations. - Free Installation & Commissioning: On-site leveling, assembly, optical alignment, and software integration performed by Metal Technics Polska field service engineers. - Free Operator Training: Hands-on technical training for machine operators and programmers (software nesting, CNC operation, parameter tuning). - Warranty: 12-month full warranty on all mechanical, electronic, and optical component parts. - Service Support: Direct factory technical support, rapid spare parts dispatch, remote online diagnostics, and complete post-warranty service programs provided directly by Metal Technics Polska. Power Supply: 3-Phase 380V / 50Hz Branding: Custom Metal Technics Polska (MTP) industrial colors & livery. Fgedpjztx Drjfx Adref

Condition: used, Year of construction: 2010, table diameter 1000 mm table load 0,5 t table height 300 mm total power requirement 12 kW weight of the machine ca. 0,5 t Fodeznndkepfx Adrsgf dimensions of the machine ca. 1 x 1,2 x 0,3 m Permamantly rotationg table,adjustable in speed. Basic of table has a diameter of 570 mm. Table diameter increased to 1000 mm. Table was mounted on a surface ginding machine. Table will be delivered with a new spare motor.

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t Fgedeztrvnepfx Adref dimensions of the machine ca. 3,7 x 2,1 x 1 m

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t Fedjipyx Nopfx Adrjgf table height 100 mm weight 126 kg Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Working diameter: 4,000 mm Working height: 730 mm X-axis: 1,110 mm Fsdpfx Asztc T Dodrogf Control system: SIMATIC S7-300 Tool holder: Grinding segments Integrated dressing unit on the grinding head In 2010, the machine underwent a comprehensive mechanical and electrical overhaul. As part of this modernization, the entire automation and drive technology was converted to Siemens technology. The machine is equipped with a MARPOSS P7 in-process measuring system. The measuring system is fully integrated into the Siemens SIMATIC S7-300 PLC control system via PROFIBUS.