Used Beck Maschinenbau Gmbh Edge Banding Press for sale (77,948)

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber cover. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with glue reservoir from below and fast heat-up time after machine downtime - Flush-trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with blade for cuttable edges - Flush-milling unit with vertical tracking and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4,000 to 18,000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film disc Ø 800 mm Technical details: - Minimum workpiece width approx. 80 mm - Workpiece thickness 10 – 50 mm - Minimum workpiece length approx. 220 mm - Edge thickness 0.4 – 2.0 mm - Roller separation max. 1.0 x 55 mm, 2 x 45 mm - Heating capacity glue pot 2.7 kW - Electrical connection 400 V, 50 Hz, 3Ph + N - Total connected load 3.8 kW - Heat-up time approx. 10 minutes Csdpfx Ajzc Agkjf Aohc - Pneumatic connection 6 bar - Working height approx. 880 mm - Dimensions approx. 1800 x 700 x 1300 mm without film disc Ø 800 - Net weight approx. 260 kg Availability: short notice Location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, load capacity: 800 kg, - Stationary scissor lift table with single scissors - Steel perforated grid plate System 16 - Platform size: 2000x1000x100 mm Cedpfx Aexazzysf Aehc - Hole spacing: 50 mm - Hole diameter: 16 mm - 360-degree rotary platform beneath the grid plate - Grid system with 4 stops every 90 degrees - Lift up/down operated by a hand control with 3 m cable - Battery-hydraulic drive - Load capacity: 700 kg - Construction height: 670 +/- 60 mm - Useful lift: 700 mm - Maximum height: 1370 +/- 60 mm - Own weight: approx. 810 kg - Stationary version with 4 base plates.

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min Chodpsz En Axsfx Af Ajc EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: PA12704, 110610702, PA12707, mobility: mobile, Badeer Fish Grading Machine – full documentation available in both Polish and English. The onboard computer operates on the MES - B'Logic software platform. It includes two modules: B'Logic Grading and a label design software B'Logic. The set includes: - CAB label printer - Feed hopper - Acceleration conveyor - Weighing machine - Sorting conveyor - PC computer The computer located next to the label printer at the machine is touchscreen. The main computer for setting product specifications (for the currently processed product) does not need to be positioned near the machine. Specification: - 100–120 fish per minute - Maximum fish size: Length – 350 mm, Width – 220 mm - Operating speed adjustable by user (as shown in the video) - Airborne noise: < 70 dB Machine dimensions: Grading section: Height: 1.3 m, Length: 4.417 m, Width: 1.050 m Conveyor belt width: 60.8 cm (S 800 seamless belt) Power consumption: 0.37 kW Steel quality: AISI 304 Motor: Worm gear drive Feed hopper: Height: 1.87 m, Length: 3.66 m, Width: 1.5 m Conveyor belt width: 45.6 cm Drum motor Power consumption: 0.37 kW Dynamic weigher: Belt width: 250/350 mm Chodpsy Hiyasfx Af Aec Product weight: up to 1 kg (possible calibration) Motor power: 0.18 kW Speed: 0.25 mm/s – 2.0 mm/s

Year of construction: 1993, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Chsdsn Sm A Sepfx Af Aec Year of construction: 1993 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Chsdpfx Asz Agw Ejf Aec - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Csdpfjz Ag Rrox Af Aohc - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: as good as new (ex-display), Year of construction: 2023, Technical description with the following main data: Load capacity 3000 kg static line load effective stroke 1100 mm Overall height 250 mm Total height 1350 mm Platform length 1700 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 29 sec. for the full effective stroke Lowering time depending on load Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 2.2 kW, 1,400 rpm. Valve voltage 24 V DC Sealing class IP 54 general, solenoid valve and switch IP65 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 455 kg Codpfx Afoupztzj Aehc Floor frame for moving with pallet truck or forklift

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Chedoz A Tx Tjpfx Af Aoc Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. Chjdpfsz Agv Uox Af Aoc - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Codpfxjzz Rpce Af Aehc - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 1990, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1990 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric Chsdpon Sm Aysfx Af Aoc distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Condition: new, Year of construction: 2024, MOBIL 2500 The mobile edge banding press. Ideal for constructing furniture! Technical Description MOBIL Typ 2500 (Typ 3000): > rigid, welded steel frame with fixed fences and spacer for massive, veneer and plastic edges > integrated electro heating rod made of resistant AL-alloy, lateral cut: 64 x 46 mm, controllable form 50 - 248°C , power 1200 (1459) Watt > 4 (6) clamping and pressing aggregates, each aggregate mounted on 7 ball bearings; each aggregate has its own clamping and pressing cylinder; adjustable width of the work piece 12 - 105 mm. Width of massive surface to be glued on the work piece is about 50 mm > adjustable counter bearings for exact conformity of the edges > pressing cylinders and the counter bearings with vulcanised rubber plating's > fixed fences and spacer are covered by a special glue abrasive coating > the pneumatic pressing units are controllable separately, always pair wise; each pair: 1 shifter for: clamping of work pieces and 1 shifter for : pressing of work pieces > press is mobile on 4 guide rollers, 2 rollers with break > the press is equipped with a pneumatic maintenance unit, adapter 3/8 ´´, pressure controllable from 3-10 bar. Electric connection for the heating rods: 230 V, 50 Hz, 1200 (1450) Watt. working space w x h x d in mm: 2500 x 50 x 105 overall dimensions w x h x d in mm: 2700 x 1200 x 850 Cjdpsyuv Tefx Af Aehc Additional options and accessories for MOBIL on request!!!

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm Chsdsfhbuyopfx Af Ajc - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: as good as new (ex-display), Year of construction: 2008, *SALE WITHOUT ROLLER CONVEYOR Technical description with the following main data: Load capacity 1000 kg static line load effective stroke 830 mm Overall height 180 mm Total height 1010 mm Platform length 1300 mm Platform width 800 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full effective stroke Lowering time load-dependent Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 0.75 kW, 1,400 rpm. Valve voltage 24 V DC Csdpfx Aoupzwasf Ashc Sealing degree IP 54 general, solenoid valve and switch IP65 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 175 kg* incl. limit switch and thermal fuse up to 2.2 kW motor - Switch for up/down and manual operation is integrated in the control box

Condition: excellent (used), Paper stack lift MZE Diplomat SHPA 175 × 130 The device is in perfect condition. Hydraulic drive, the latest type hydraulic unit. Power supply 400V Panel-operated lifting cycle, fast work. Csdpfx Afsztn A Dj Ashc Capacity 1500 kg. Pallet / sheet size 1750×1300 mm

Condition: as good as new (ex-display), Year of construction: 2021, - Mobile scissor lift table with a single-scissor mechanism - With a smooth metal sheet platform, WITHOUT a sliding bar Cjdpfx Ajfnnayjf Aehc - The lifting mechanism (up/down) is operated via a hydraulic foot pump - Load capacity: 1200 kg - Overall height: 450 mm - Lifting height: 700 mm - Maximum height: 1150 mm - Platform size: 2000 mm x 1000 mm - Weight: 420 kg - 2 swivel casters with brakes, 2 fixed casters without brakes - Wheel diameter: 150 mm - Powder-coated finish: base frame and platform frame in light gray RAL 7035, scissors in violet-blue RAL 5000

Condition: new, Year of construction: 2024, - Frame and edge press, single-sided/stationary - Usable dimensions in mm as a frame press: 2630 x 1610 - Usable dimensions in mm as an edge press: 3000 x 1610 - External dimensions in mm: 3200 x 2090 x 730 - Sturdy frame welded construction made of thick-walled profile tubes and laser-cut steel sheet parts ensures a torsion-resistant and dimensionally accurate press frame (no screwed frame parts!) - With left-hand counter bearing, sliding carriage for width adjustment, central locking system, and 2 manual hydraulic press units with ergonomic handles. - 3 roller-bearing, vertical pressure beams, type SK, made of thick-walled profile tube, galvanized, with manual hydraulic press units incl. ergonomic handle. 20,000 N pressing force, 60 mm stroke. Press units adjustable in a 50 mm hole grid. - Counter bearing at the bottom with safety lock, adjustable in 5 steps in the hole grid - Lower clamp with spindle pressure Csdpfxjhd Nyws Af Aehc - Chassis with 4 swivel casters (2 with brakes) - Powder-coated (glue-resistant) gray-white RAL 9002, pressure plate and counter bearing cornflower blue RAL 5010 - The Quattra 1-SK version is equipped with a comfortable adjustment system for the manual hydraulic press units, providing additional safety for the operator.

Condition: new, Year of construction: 2024, manual hydraulic frame and edge press 1-sided, stationary > strong welded steel frame > frame pressing system with continuous counter pressure beam on the left side > 1 movable slide (machined surface) for horizontal calibration of width, adjustable in 50 mm increments; with bolt for central locking > 2 manual hydraulic cylinders, horizontal adjustable, pressing strength of 20.000 N each and stroke of 60 mm > 5 vertical pressing units on ball bearings in galvanized structural steel with manual hydraulic cylinders, pressing strength of 20.000 N and stroke of 60 mm pressing units adjustable in 50 mm increments; bearings adjustable six fold and with drop out safety lock; bearing and pressure plate: 40 mm long and 80 mm deep > 1 zinc-plated adjustable hold-down bar with screw clamp, manual to be unhinged > painting: grey-white RAL 9002, abutment and pressing plate blue RAL 5010. > also available with more or less vertical pressing units art.no. Q 007 (as listed in accessories and options) Chjdpfxoyuxke Af Aoc working space as frame press (w / h in mm): 2700 x 1800 working space as edge press (w / h in mm): 3000 x 1800 overall dimensions (w / h / d in mm): 3340 x 2350 x 730 Price additional packaging costs 92,- netto

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 1235/1250P, cutting width (max.): 1,250 mm, working width: 1,250 mm, input current: 64 A, paper height (min.): 1 mm, paper height (max.): 10 mm, label length: 250 mm, working length: 1,235 mm, production capacity: 300 unit/h, STOCK LM 1235/1250P LAMINATION MACHINE | 1250 MM | GERMAN MADE For sale: STOCK LM 1235/1250P lamination machine manufactured by the German company Stock Maschinenbau GmbH. This machine is designed for laminating corrugated and solid cardboard with decorative paper, labels, and printed sheets, enabling the production of aesthetically pleasing packaging, promotional boxes, and display materials. The machine is equipped with an automatic gluing system, a label positioning system, and a pressure roller that ensures high-quality material bonding. Its robust German construction guarantees stable operation and low operating costs. Key advantages: • Working width of 1250 mm • Ability to laminate XL sheets up to 1620 x 1210 mm • Smooth speed adjustment • Smooth adjustment of the feed table movement • Automatic glue feeding and replenishment • Glue level sensor • Easy and quick adjustment of operating parameters • Central lubrication system • Pneumatic clutch • Cycle counter Codjzd Dwlspfx Af Ajhc • Safety system: safety bar and scrapers Equipment: • Semi-automatic label feeder • Table for manual feeding of plano sheets • Manual feeding of corrugated cardboard or die-cuts • Gluing unit with automatic glue feeding • Sensor for detecting and registering labels • System for positioning and applying cardboard • Pressure roller • Receiving table for stacking finished parts • Central frame for mounting die-cuts Technical data: • Manufacturer: Stock Maschinenbau GmbH (Germany) • Model: LM 1235/1250P • Year of manufacture: 1995 • Maximum working width: 1250 mm • Size of laminated sheets: up to 1620 x 1210 mm (length virtually unlimited) • Thickness of laminated materials: 0.8 - 10 mm • Performance: approximately 300 cycles/h • Power supply: 380 V / 50 Hz • Power: 18 kW • Power socket: 64 A • Machine dimensions: 6720 x 1910 x 1580 mm This machine represents an economical solution for companies seeking an efficient and reliable laminator for the production of premium packaging. The German construction guarantees durability, stable operation, and ease of use.

Condition: new, Year of construction: 2024, OTHER VARIANTS AVAILABLE UPON REQUEST - 4 levels - Clamping depth 1050 mm Cedpjgqu Alofx Af Aehc - 2 pressure beams, 1200 mm long, 60 mm high, per level - 2 straight, continuously adjustable counter supports, 1200 mm long, per level - 6 clamping cylinders with handwheel, per level - 6 support arms, per level - All support arms with plastic pads (glue-resistant) - Maximum pressing length 2600 mm - Powder-coated (glue-resistant): gray-white RAL 9002, moving parts light blue RAL 5012 - The presses are delivered ready for operation with a pressure regulating valve + air connection.

Condition: good (used), Year of construction: 2011, 2x Mobile conveyor systems for unloading trucks/swap bodies, etc. – used: Price per unit, ex works: only €950 (net), including loading! If both systems are purchased, we will add a non-powered roller conveyor! Approx. 4 x 3 m, with feet for easy movement! One system consists of 2 belt conveyors (powered) and a roller conveyor that can be connected/extended. Of course, only one belt conveyor and the roller conveyor can also be used, etc. Manufacturer: SRD Maschinenbau GmbH Type: Mobile conveyor system Year of manufacture: 07.2011 SERIAL NUMBER: 3447 Element width: approx. 80 cm Cjdpfxsz Dtine Af Aehc Belt width: approx. 65 cm Length of belt element: 4.10 m Length of roller conveyor: approx. 5 m Total length when all 3 elements are assembled: approx. 13 m! Roller diameter approx. 5 cm, roller length approx. 60 cm Height: approx. 75 cm Connection values: 400V/50Hz 16A Condition: good Available: immediately Location: Hamburg

Condition: like new (used), Year of construction: 2014, functionality: fully functional, GHD Georg Hartmann Maschinenbau GmbH, SELECTRA 25, 2014, good condition. Capacity: Up to 3000 products /h Product dimensions: Length: 160 - 400 mm, Height: 50 - 150 mm Power input: 5 kW Chjdpfx Afoylurks Asc Air: 6,0 bar Ready to ship

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, Lift table with a built-in chain conveyor. Load capacity 3 tons. Csdpfx Afofhbups Aehc Platform size approx. 3200 x1200mm. Technical description : Single scissor lift table type TT3000Bsp. - 3000Kg load - useful stroke 1600mm - Height 350mm - platform approx. 3200 x1200mm - Hydraulic unit drive with 2.2 KW motor - Switch up / down with manual switch Chain conveyor with 3 conveyor chains installed on the lifting table. - Length about 3200mm - Distance of the outer chains is 1100mm. - Drive gear motor SEW 1.1 KW - Drive is installed under the lifting platform. - Conveyor chains 3 x 1½ "roller chain German quality - conveyor speed approx. 7m / min - Stable cover plates between the conveyor chains, accessible, closed form. - Electrical switching manually via manual button dead man's switch, with function forwards / backwards. - Construction height about 300mm. Base frame substructure with adjustable feet can therefore be driven under with forklift forks. Overall height: approx. 750 mm 1 pc = Lifting table + chain conveyor + floor frame.

Condition: as good as new (ex-display), Year of construction: 2024, available in various lengths upon request - Length 3000 mm with 3 support feet - Roller track with scale, manual measuring system with adjustable and foldable length stop, incl. reading magnifying glass - Roller and measuring track for lighter plastic, aluminum, and steel profiles - The max. measuring length is the track length minus 250 mm - Support rollers, roller diameter 50x1.5mm, galvanized steel tube - Axle diameter 8mm Chsdpfx Aogrn U Sof Aoc - Track width 390 mm, usable roller width 300mm - Load-bearing capacity per meter of roller track approx. 100 kg/m - Support roller spacing approx. 290 mm - Track height adjustable from 770-1070 mm - All parts are painted, color silver-grey RAL 7042, feet anthracite-grey RAL 7016