Used Behringer Lps 60 Ta for sale (31,282)

Condition: excellent (used), Year of construction: 2022, Available immediately. Behringer LPS 60 TA, manufactured in 2022, in excellent condition. Knsdpjzubxhsfx Aklea This is a very special band saw; it operates fully automatically! - Auto feed control with cut monitoring - Saw band drive 5.5 KW - 10-120 M/min - 54 mm band - Clamping device for saw sections - Line laser Advantages of the LPS-TA table band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long band life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force transmission of the saw feed is located directly below the cutting point. Advantages in material procurement By producing flat materials from large sheets, efficiency gains can be achieved in both storage and the purchase of raw materials. Clamping device for layered cuts (option) For sawing larger batch sizes, sheets can be stacked in layers and securely held in place using the optional vertical additional clamping device. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large-sized chip conveyor with an integrated coolant tank. Chips and coolant are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be extended out of the machine frame. Powered duplex chip brushes effectively clean the saw band, thereby increasing tool life. The brushes are automatically adjusted to the saw band and ensure consistent cleaning performance. Automatic feed device Through the combination of an NC-controlled feed device and intelligent control, sheets can be separated into strips fully automatically. Servo feed system The use of the Behringer servo feed system creates a constant chip removal rate and utilizes the performance of modern saw bands more effectively. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloading and premature wear of the saw bands. Quick saw band change ensures the shortest possible setup times. In just two to three steps, the saw band can be moved to the change position. Band-guiding parts made of gray cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thereby increasing tool life. Compact Due to its compact dimensions, the table band saw can be installed even in confined spaces. Movable material support table For easy loading and unloading by crane, the material table can be extended out from under the saw unit.

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 60 rpm Knedodkzv Eepfx Aklea -Power: TA = 5 Nm -Construction: B3 -Shaft: Ø 25 mm -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 700/225/H210 mm -Weight: 30 kg

Condition: used, Automatic band saw, used but technically in good condition. Maximum capacity: Ø 260 mm Knodpfsw N Iw Ijx Aklja

Condition: used, Year of construction: 1993, machine/vehicle number: 493187, Lg. No. 21236 Hydraulic - twin-column guided miter - metal band saw Technical Data: Knedpfx Ajwqpmnoklja - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Miter adjustment via handwheel - Saw band size 5400 x 38 x 1.3 mm - Cutting speed steplessly adjustable 19 - 130 m/min - Cutting pressure steplessly adjustable 0 - 10 m/min - Manual material clamping - Pre-selection of the stroke height of the saw band - Micro-spray coolant system - Total drive power 400 V / 8 kW - Space requirement ca. W 1800 x H 2000 x D 3250 mm - Weight approx. 2200 kg - Infeed + outfeed roller conveyors each approx. 6000 / 8000 mm

Condition: excellent (used), Year of construction: 2011, Behringer Eisele HCS 160 MF including sorting and feed magazine, air filtration system, and much more. The machine will arrive at the end of August and will then be refurbished. The photos show the original condition. Knodpfjzhki Aox Aklea

Year of construction: 1997, condition: used, Quick clamping device, quick clamping device, hydraulic clamping device, automatic band saw clamping device, hydraulic double vice -Clamping device: hydraulic double vice from automatic band saw Behringer HBP 360 A -Clamping depth: up to approx. 380 mm Kjdsgbvnvspfx Aklsna -Measurements: see photos -Dimensions: 400/1130/H665 mm -Weight: 192 kg

Condition: good (used), Clamping device for automatic band saws, saw band rollers, saw band guide -Saw blade guide, from Behringer HBP HBP360A band saw machine -Price: complete Knedpfx Asgccunekloa -Dimensions: 460/70/H505 mm -Weight: 28.6 kg

Condition: used, Year of construction: 2000, machine/vehicle number: 300584, power: 7.5 kW (10.20 HP), cutting height (max.): 360 mm, cutting width (max.): 400 mm, Equipment: CE marking, documentation/manual, High-performance, heavy-duty automatic horizontal bandsaw from premium German manufacturer Behringer. Designed for precise and cost-effective cutting of solids, tubes, and profiles. Key Features: Kjdpfozbg E Iox Aklena Stable Dual-Column Design: Twin-pillar construction guarantees vibration-free operation, geometric accuracy, and maximum blade life. Fully Automatic Operation: Equipped with a hydraulic material feed system and automated clamping vices for mass production cycles. Behringer NC Control: Original digital operator panel for easy programming of cutting lengths and batch sizes. Condition: The machine is in fully operational condition, regularly maintained, and currently located in an active production workshop environment. CE certified.

Condition: good (used), Year of construction: 2013, Clamping Force: 60 tons (600 kN) Kodpfxjwp E Hzj Aklsna Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Ejector Stroke: 106 mm

Condition: new, pressure 60 t stroke max. 300 mm bending capacity max. - flat 300 x 16 mm working feed 10 mm/sec Control NC Height of Toolings 300 mm total power requirement 5,5 kW weight of the machine ca. 1530 kg The Gerd Wolff HP 60 is a hydraulic horizontal press machine with many many possible combinations. Whether it is the bending of tubes, the punching of profiles or the cutting of sheet metal - with the right accessories, the HP 60 is a multifunctional machine among all presses. Standard accessories - ergonomic tool clamping table - easy tool change - hydraulic speed and pressure adjustment - easily adjustable back gauge - induction hardened support pins - NC control Highlights - control panel with digital display - Easy tool change Kodpfx Ajxfb Ikskljna - hardened support pins - hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik", by a renowned manufacturer from Türkiye. The pictures are for orientation only and are not true-to-scale representations of the machine.

Condition: used, RENISHAW OMP 60 3D measuring probe SK40 Knedsy Dia Ispfx Akloa Condition: Glass cover damaged, but function not affected.

Condition: ready for operation (used), Indramat TRK6-4U-380 / 60-G0 / 527 - TRK6-4U-380/60-G0/527 6 pulse thyristor control amplifier, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Ksdpfx Aor R Uqpokljna

Year of construction: 2023, operating hours: 2,000 h, condition: used, Drive: Diesel-electric Power: 55 kW / 80 kVA Equipment: Kedpexrzymefx Akljna Predefinable fractions Quick-change system Centrifugal separator Duramax cleaning elements Split-speed system Extra-long conveyor belts Operating position: Length (mm): 12,700 Width (mm): 11,200 Loading edge (mm): 3,500 Discharge height (mm): 3,500 Transport dimensions: Length (mm): 11,950 Width (mm): 2,550 Height (mm): 4,000 Weight (kg): 25,000 OPTIONALLY available: Stone belt Tracked chassis Magnetic head rollers Air separator (windsifter) Automatic central lubrication And much more…

Condition: used, Year of construction: 2008, machine/vehicle number: 50071, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 42 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, height adjustment type: electric, feed rate X-axis: 16 m/min, actuation type: pneumatic, total height: 1,600 mm, total length: 7,200 mm, total width: 1,600 mm, overall weight: 3,700 kg, Equipment: CE marking, documentation/manual, We offer this well maintained IMA Advantage 60 edgebander, year of manufacture 2008. Machine type: Advantage 60 Serial number: 50071 Year of manufacture: 2008 Voltage: 400 V Frequency: 50 Hz Electrical supply: 3 N PE Nominal power: 18 kW Nominal current: 42 A The machine has the following groups: Premilling Blow-off nozzle for removing loose particles Heating unit Gluing unit End trimming unit MFA unit for milling/corner rounding Profile scrapper Kjdpjy Um Tmsfx Aklena Cleaning agent application unit Riepe Flat scrapper Brushes Grooving unit With two interchangeable glue pots If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, empty load weight: 7,850 kg, axle configuration: 3 axles, first registration: 08/2018, next inspection (TÜV): 02/2026, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2018, mileage: 5,26,001 km, ref: W0013571 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-decking system, * Double-decking beams: 22 VIN: WSM000005210842 Tire size: 385/65 R22.5 Internal length: 13.33m Width: 2.6m Internal width: 2.46m Height: 4m Internal height: 2.65m Kodpfx Akozupnqoljna

Condition: used, empty load weight: 7,850 kg, axle configuration: 3 axles, first registration: 10/2018, next inspection (TÜV): 11/2026, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2018, mileage: 1,53,767 km, Ref: W0013829 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, Kedpfxozupnko Aklona * ABS, * EBS, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 VIN: WSM000005210852 Tire dimension: 385/65 R22.5 Internal length: 13.33m Width: 2.6m Internal width: 2.46m Height: 4m Internal height: 2.65m

Condition: used, empty load weight: 8,446 kg, axle configuration: 3 axles, first registration: 02/2018, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2018, mileage: 5,56,803 km, Ref: 50961 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, Knsdpfxezk Rl As Aklsa * Electrical cable for refrigeration unit, * Fire extinguisher: 1, * Document box, * Side impact protection, * Lifting odometer, * Wheel chocks: 1, * Toolbox: 1, * Access ladder, * Rear door design: Rear portal doors, * Locking bars on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22, * Spare wheel holder: 2 VIN: WSM000005200425 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, 4 x used bitumen tanks, 60,000 liters each Kodpfx Akezqu Ubjlona - complete piping system available upon request.

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Knedpfx Akjwtft Nsloa Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: new, functionality: fully functional, power: 2.8 kW (3.81 HP), fuel type: gasoline, color: yellow, operation weight: 58 kg, Year of construction: 2026, Equipment: UVV, Bomag BT 60 Tamper – NEW Bomag BT 60 Tamper – NEW | 15 kN impact force | 23 cm footplate | Honda GXR 120 gasoline engine | Operating hour and RPM counter Item number: 54100071 Technical data: Manufacturer: Bomag Model: BT 60 Condition: NEW Operating weight: 58 kg Impact force: 15 kN Footplate width: 23 cm Engine: Honda GXR 120 gasoline engine Engine power: 2.8 kW Fuel: Gasoline Starting system: Reversible start Highlights & Features: - Compact tamper for precise compaction work - Robust design – ideal for daily use on construction sites - 23 cm footplate – optimal for narrow trenches & edge areas - Honda gasoline engine – reliable & easy to maintain - Integrated operating hour and RPM counter - Made by Bomag – proven quality & immediately available Application areas: ✓ Pipeline & sewer construction ✓ Fiber optic & cable laying ✓ Garden & landscaping ✓ Municipal applications & construction companies ✓ Compaction work in confined areas & trenches Location: Warehouse D-46514 Schermbeck (North Rhine-Westphalia) – Inspection & collection possible Delivery throughout Germany & internationally on request Pricing ex warehouse Maassenstraße 91, D-46514 Schermbeck (Wesel district) All information without guarantee. Errors and prior sale excepted. Prices plus VAT Other models available! Also available with 16 cm, 20 cm & 28 cm footplates ➡️ New & used machines, accessories & spare parts Buy Bomag tamper | BT 60 NEW | Gasoline tamper 15 kN | Compaction equipment with Honda engine | 23 cm footplate | Bomag compaction technology | Tamper for sewer construction & trench compaction Your reliable partner for compaction technology & construction machinery: Claudio Macagnino Baumaschinen & Nutzfahrzeughandel GmbH ➡️ Request now & secure immediately available new goods! If required, we will gladly arrange a virtual inspection of the machine via video call. Knodpfozrdbyjx Aklja

Condition: ready for operation (used), KSB ETABLOC-G 50-160/114 ID: 48862505 pump with QU FS 90S4A-60 H motor, serial number: 163752M, used, in good condition, 100% functional, scope of delivery as shown in the photos. Kedezh Sc Rspfx Aklona

Condition: used, Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch Knedpfxjcwn E Ns Akloa -only one tool available (counter tool missing) -Shearing tool for channel steel: 30 mm, 60 mm -Type: 441216084902 -1x dimensions: 210/220/H30 mm -Weight: 9.9 kg

Condition: good (used), rotary table, rotary indexing table, controlled rotary table, rotary indexing table, rotary indexing table, indexing table, rotary table, compact rotary table -Manufacturer: Sopap, compact rotary table -Type: Ta 160-12-270-2-D -Clamping surface: Ø 240 mm, bolt circle Ø 200 mm / M12 Knjdpfou Huunox Aklsa -Speed: 8 rpm / 12 intervals -Brake: 40 Nm -Individual components: see photos -Dimensions: 700/610/H390 mm -Weight: 212 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: approx. Ø 90 mm -Piston rod: Ø 60 mm -Pipe outer diameter: 120 mm -Stroke: 940 mm -Total length when retracted: 1510 mm -Piston tube mounting: Ø 25 mm -Piston rod mounting: Ø 35 mm Ksdpochaynefx Aklena -Ideal for building a hydraulic press -Quantity: 1 piece available -Weight: 80 kg

Condition: used, Year of construction: 2014, operating hours: 1,869 h, load capacity: 3,000 kg, lifting height: 6,105 mm, fuel type: electric, construction height: 2,470 mm, Equipment: cabin, head guard, * Load capacity: 3000 kg Ksdstruw Sopfx Akljna * Max. lifting height: 6,105 mm * Overall height: 2470 mm * Own weight: 5969 kg * Free lift: 2145 mm * Battery voltage: 80 V * Drive power: 15 kW * Unladen weight: 4,013 kg -----Internal vehicle number: 9592----Errors and prior sale excepted.