Used Benteler Sp10 for sale (49)

Year of construction: 2016, condition: ready for operation (used), Max. printing format: 1200x650mm, max. printing speed: 1000mm/s, connected load: 8kW, with documentation, has been regularly serviced by the manufacturer, on-site inspection is possible. Ljdjq N A Ncjpfx Abyehl

Condition: used, Year of construction: 2006, functionality: fully functional, Fully renovated, repainted drilling machine. Guides, bearings, compressed air pipes has been fully changed. Lsdpexz Ez Hsfx Abyjhl

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Horizontal glass washing machine BENTELER tecLine 25/3 Year of production: 2003 Maximum glass working width: 2500 mm 3 pairs of brushes (6 pcs.) Very good and clean condition As is Available immediately Lodpfx Asx Ecv Aebyehl

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Ledpez Dvfxefx Abyohl Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Year of construction: 2001, operating hours: 27,400 h, condition: good (used), functionality: fully functional, Die-cutting machine with stripping station, foundation tilting table (third-party manufacturer), tilting table/preparation table, waste stripper, electronic double-sheet detection, pull marks BS + AS, machine height increased by 300 mm, 1 die-cutting frame, various stripping frames and stripping pins (including cart), quick centering device for sheet stacks, manual non-stop feed, manual non-stop delivery, price ex works, dismantling and loading can be arranged for an additional charge! Video available upon request! In May 2026, a PLATEN CONDITIONING was carried out by BOBST on the die-cutting machine. All deposits were removed from the upper and lower tables, and the die was polished. The sector was opened and assessed as being in "like-new" condition. Photos, video, or invoice available upon request! Ljdpfxszmyfdj Abyehl Note: The platform must be adapted by the buyer! Longitudinal handrail missing! Technical main data: Maximum sheet size: 720 × 1020 mm, Minimum sheet size: 350 × 400 mm, Maximum die-cutting force: 250 tons (2.5 MN), Maximum production speed: 7,500 sheets per hour, Processable materials: Paper / solid board: from 80 g/m² up to 2000 g/m², corrugated board: up to 4.0 mm thick Dimensions and weight: Machine length: approx. 6,000 mm Machine width: approx. 2,000 mm Machine height: approx. 2,500 mm Total weight: approx. 19,500 kg Features of the Series II: C.U.B.E. system: Electronic Bobst machine control system Centerline system: Micrometric adjustment for fast set-up times and precise tool alignment Stripping station: Integrated double-round stripping unit for waste removal Non-stop system: Continuous sheet feeding and delivery Ultrasonic double-sheet detection

Condition: excellent (used), Year of construction: 1960, functionality: fully functional, machine/vehicle number: V-65R, cutting force: 100 t, total width: 1,400 mm, total length: 6,000 mm, total height: 2,100 mm, overall weight: 8,300 kg, pressure: 30 bar, Arnold baling press SP-100 In very good condition. Regularly maintained and in continuous operation until today. Lhjdpoz Az Exofx Abyel

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 146978, Knuth Surface Grinding Machine Flat HFS 2500C Working Area & Capacities Table dimensions: 250 x 500 mm Grinding area (max.): approx. 500 x 250 mm Maximum workpiece weight: 180 kg Distance spindle center to table surface: 450 mm Travel Distances & Feeds Ledpoy H Dg Ijfx Abyohl Longitudinal travel (X-axis): 560 mm Cross travel (Y-axis): 275 mm Hydraulic table feed (X): 7 – 23 m/min Rapid traverse cross (Y): 990 mm/min Rapid traverse vertical (Z): 460 mm/min Spindle & Grinding Wheel Grinding spindle motor power: 2.2 kW Grinding wheel dimensions: 200 x 20 x 31.75 mm Graduation: Y-axis 0.02 mm / Z-axis 0.005 mm Dimensions & Weight Machine dimensions (LxWxH): approx. 2650 x 2150 x 1675 mm Total weight: approx. 1800 kg

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Benteler, hydraulic unit type Pressure: bar -Flow rate: 18 l/min -Hydraulic tank: with level indicator Lhsdsv Sp Sbopfx Abysl -Pressure accumulator: -Individual components: see photos -Dimensions: 635/560/H620 mm -Weight: 198 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Automatic CNC screen printing machine ASP-100LS/CD (K5) | Manufacturer: Oltronik Lsdpfx Abjzwdwrjyehl MACHINE OFFERED: The ASP-100LS/CD machine is a professional, numerically controlled (CNC) device for multi-color screen printing on cylindrical, oval, and rectangular objects. It enables the execution of multi-color printing cycles (up to 5 colors simultaneously) with UV drying, both for cylindrical and flat printing. A PLC controller with a touchscreen provides precision, repeatability, and ease of programming. TECHNICAL DATA: Manufacturer: Oltronik | Model: ASP-100LS/CD (K5) Year of manufacture: 2005 | Operating hours: 156,865 cycles Control: CNC PLC with touchscreen Squeegee heads: 5 pcs. Drying: UV (for cylindrical and flat printing) Cylindrical printing: Ø32–Ø150 mm (printing height 145 mm) Rectangular printing: 32×32 mm to 105×105 mm Oval printing: 32×32 to 150×150 mm Printing range (2 screens): 410 mm | (3 screens): 220 mm | (4 screens): 125 mm | (5 screens): 68 mm Max. external height of screen frames: 485 mm | Frame profile: 25×25 mm EQUIPMENT: Pneumatic system (air preparation station, manometers, loading cylinders, screen holding cylinders, and squeegee pressure cylinders), electrical system with a control cabinet, operator panel, start pedal, emergency stop button, protective housing. DOCUMENTATION: Complete technical and operating documentation from the manufacturer Oltronik (76 pages).

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, Band saw Wespa AS4 Vertical band saw WESPA, type AS 4 Year of manufacture approx. 1975 Wheel diameter 400 mm Overhang 380 mm Table size 610 x 610 mm Cutting height max. 245 mm Saw blade length min. 2800 - max. 3000 mm Lhedpfx Aozi Tphobyol Saw blade speed 25-550 m/min, continuously variable Mains connection 400 volts, 50 Hz - Continuously variable saw blade speed via 2 gear stages and continuously variable belt drive - Saw table with longitudinal adjustment via handwheel with threaded spindle - Saw table tiltable - Adjustable fence for the saw table - Saw blade butt welding machine IDEAL BS 0-16 - Saw blade shear - Grinding wheel for grinding the weld seam - Air compressor with blow nozzle - Machine lamp Space requirement L x W x H 1100 x 800 x 1810 mm Weight 530 kg Good condition

Condition: used, Year of construction: 1987, functionality: fully functional, Drilling capacity in steel (diameter) 80 mm Arm reach 2000 mm Workpiece height - approx. 1300 mm Boring diameter in steel 100 mm Boring diameter in cast iron 115 mm Thread cutting in ST 60 M 68 mm Spindle speeds 16 - 1250 rpm Number of spindle speeds 32 Spindle stroke 550 mm Number of feeds 18 Feed range 0.06 - 3.0 mm/rev Distance spindle/baseplate 480 to 1800 mm Column diameter 500 mm Spindle motor 11 kW Lifting motor 4 kW Total power requirement 15 kW Machine weight approx. 8,500 kg Lhsdpfsy H Dauox Abysl Footprint 3200 x 1250 x 3600 mm with work table 1500 x 1000 x 500 mm

Condition: used, input voltage: 380 V, total length: 1,320 mm, total width: 940 mm, total height: 830 mm, tank capacity: 250 l, overall weight: 540 kg, power: 1.5 kW (2.04 HP), Ref: SP 100 L Flour capacity: 100 kg Dough capacity: 160 kg Bowl volume: 250 L Number of speeds: 2 Tool speeds: approx. 110 / 220 rpm Spiral power: 6.5 kW Bowl power: 1.5 kW Timers: 2 Bowl rotation: right / left Controls: push buttons Dimensions: 940x1320x830mm Weight: 540 kg KEMPER SP 100 L spiral mixer – 100 kg of flour The KEMPER SP 100 L is a professional spiral mixer with a fixed bowl, designed for bakery productions requiring large-scale kneading. Its documented capacity reaches approximately 100 kg of flour for 160 kg of dough, with a bowl of approximately 250 L. This configuration makes it a suitable model for bakeries seeking high capacity while maintaining a simple workflow around an integrated bowl. Why this model stands out The SP 100 L uses the zone kneading principle developed by KEMPER. The dough is worked between the spiral and the bowl according to a geometry designed to promote homogeneous kneading while limiting its heating. The model has two speeds, with tool speeds of approximately 110 and 220 rpm, to differentiate the phases of the cycle. Two electromechanical timers allow the working times to be adjusted. The bowl rotation is reversible, to the right or left, which provides greater control during incorporation and kneading. Key advantages 100 kg flour capacity 160 kg dough capacity 250 L bowl Lodsz Arluepfx Abyjhl Two kneading speeds Two electromechanical timers Reversible bowl rotation (right / left) Bowl and spiral made of stainless steel KEMPER zone kneading system Bowl protection with safety device Closed body facilitating routine maintenance

Condition: good (used), Year of construction: 2015, functionality: fully functional, Screw Compressor GX5FF EP Main Technical Data (10 bar version): Motor Power: 5.5 kW (7.5 HP) Operating Pressure (max.): 10 bar (e) / 145 psi Free Air Delivery (FAD):* approx. 10.0 l/s to 10.1 l/s Sound Pressure Level: approx. 64-66 dB(A) (very quiet due to soundproof enclosure) Cooling System: Air-cooled Duty Cycle: 100% (suitable for continuous operation) Features & Dimensions (Full Feature - FF): Integrated Refrigerant Dryer: Yes (R134a) Tank Size: Mostly mounted on 200L or 500L tank (typical in 2015) Ledpjy H D R Hefx Abyohl Dimensions (approx.): 1430 mm x 665 mm x 1260 mm (tank-mounted) Weight: approx. 198 kg - 310 kg (depending on tank size) Connection: 1/2" G

Condition: used, Year of construction: 2019, Injection molding machine Demag EL Exis SP 1000/1195-6300, year of manufacture 2019. Ledezxxhuspfx Abyehl

Condition: ready for operation (used), Year of construction: 2019, operating hours: 25,500 h, clamping force: 10,000 kN, screw diameter: 110 mm, displacement volume: 3,136 cm³, Sumitomo SHI Demag EL-Exis SP 1000-6300 Lhedpfx Abjygk Eisyol

Condition: used, Year of construction: 1965, Forte saw. Lhjdpfjzi Tvuox Abyol

Condition: used, turning diameter over cross slide: 185 mm, turning length: 250 mm, turning diameter: 280 mm, spindle bore: 50 mm, spindle speed (min.): 6,000 rpm, travel distance X-axis: 180 mm, travel distance Z-axis: 285 mm, total height: 1,730 mm, total length: 2,180 mm, total width: 1,610 mm, overall weight: 3,000 kg, General Application: The Gildemeister CT 20 is primarily used in precision machining, especially for the production of complex components in industries such as the automotive industry, aerospace, and general mechanical engineering. Due to its capabilities, it is suitable for tasks that require high accuracy and efficiency in turning operations. Advantages: - The compact design allows for efficient use of space in manufacturing environments. - The high spindle speed of 6000 rpm enables fast machining and reduces cycle times. - The versatile turret with 12 tools and 8 rotating tools increases productivity, as multiple machining operations can be performed without tool changes. - The robust spindle motor power of 7.5 kW ensures consistent performance even under heavy workloads. - The precise machine travels in the X and Z axes facilitate complex machining operations and contribute to high-quality production. Lhsdpfozi Uqgsx Abyjl Buffer battery is low, machine data needs to be checked!

Year of construction: 2017, condition: new, machine/vehicle number: 1C330966, Oil/water separator DONALDSON Ultrasep Superplus UFS-SP10 Nominal compressor capacity (related to 1 bar absolute and 20 °C, depending on compressor type and lubricant): 250 m³/h Connection: G 1" Ljdpfx Abodbwf Ieyehl Container volume: 50 liters Volume of the pre-adsorber: 3.2 liters Volume of the effective activated carbon adsorber: 8 liters

Condition: used, mileage: 1,67,000 km, power: 320 kW (435.08 HP), first registration: 09/2009, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 8x4, wheelbase: 6,450 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, total length: 9,870 mm, total width: 2,520 mm, Year of construction: 2009, Equipment: ABS, AdBlue, air conditioning, crane, electric window regulation, = Additional Options and Accessories = - Leaf suspension - Digital tachograph - Hub reduction - PTO (Power Take-Off) - Radio/CD player = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,946 cc Axle Configuration Front axle 1: Tire size: 385/65 R 22.5; Steering; Tire tread left: 70%; Tire tread right: 70%; Suspension: leaf suspension Front axle 2: Tire size: 385/65 R 22.5; Steering; Tire tread left: 70%; Tire tread right: 70%; Suspension: leaf suspension Lsdpfx Aszfg Sbsbyohl Rear axle 1: Tire size: 315/80 R 22.5; Twin tires; Left inner tire tread: 80%; Left outer tire tread: 80%; Right inner tire tread: 80%; Right outer tire tread: 80% Rear axle 2: Tire size: 315/80 R 22.5; Twin tires; Left inner tire tread: 40%; Left outer tire tread: 40%; Right inner tire tread: 40%; Right outer tire tread: 40% Weights Curb weight: 24,600 kg Payload: 19,400 kg Gross vehicle weight: 44,000 kg Condition Damages: none

Year of construction: 1981, condition: excellent (used), We offer this machine in very good condition: Bobst SP 102E Autoplaten, manufactured in 1981. Manufacturer: Bobst/Switzerland Model: SP 102E Autoplaten Year of Manufacture: 1981 Condition: Very good equipped with a stripping section, still in production, available from August 2026 The machine is still in production. Test runs are available. It is the main die-cutting machine in our print shop and is equipped with a stripping section. Available from August 2026. No intermediaries – directly from a Polish printing house!!! Lhjdpfx Asy H Dl Dobyjl Price: 50,000 EUR EXW Negotiable.

Condition: ready for operation (used), Year of construction: 2008, Edgebander manufactured in 2008. This BIESSE Edge Stream B1 features a comprehensive set of tools including a PU-gluing machine, pre-milling unit, edge trimmer, and fine milling unit. It also includes rounding and edge scraper units, along with swaying brushes and an edge heater. If you are looking to get high-quality edging capabilities, consider the BIESSE Edge Stream B1 machine we have for sale. Contact us for further details. • Liquid spray unit (ADZ) • Pre-milling unit (RT) • PU gluing unit (SP10, Nordson) • Edge trimmer (IT90) • Balance tool trimmer (RS10) • Fine milling unit (RF40) • Rounding unit (AR60) • Edge scraper (RB40) Lhodpfx Aszuhd Rjbyel • Glue scraper unit (RC20) • Swaying brushes • Edge heater (PH10)

Condition: excellent (used), functionality: fully functional, Double-sided grinder Grützmacher GSP10 Lhsdoxmgrqspfx Abyjl Working width: 200-1000 mm Working height: 230 mm Number of units: 2 Mechanical oscillation of sanding belts Pneumatic head approach Grinding motor power: 2×7.5 kW Oscillation motor power: 2×0.15 kW Sanding belt: 2500x250 mm Exhaust ports: 2x140 mm

Condition: excellent (used), Year of construction: 2006, S.C.T. - ASP1020 - screen printing cylinder for UV varnishing Year 2006 Max. size: 1,020 x 740 mm Lsdpfx Abozx Duyoyohl Min. size: 560 x 370 mm Max. varnishing area: 1,020 x 720 mm Control panel Paper weight: 120 – 350 g/m2 Frame format: 1,140 x 1,280 mm Stack height: 700 mm Speed: 1,000 – 3,000 sheets/hour Dual tunnel: IR / UV In production Available immediately

Condition: ready for operation (used), Year of construction: 2006, Bobst SP102-BMA Foilmaster Equipped with: Fully Automatic Feeder Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Lhjdswgz Rkopfx Abyjl Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Ljdper Hr Arefx Abyehl Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.