Used Beyeler 3200 Kn X 3100 Mm for sale (96,060)

Condition: used, Year of construction: 2005, machine/vehicle number: 05/460/013, functionality: fully functional, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, stroke length: 265 mm, operating speed: 200 mm/s, overall weight: 18,000 kg, Equipment: CE marking, For sale: Betzeler 3200 KN x 3100 MM machine – Hydraulic bending press Manufacturer: Beyeler GmbH, Mühlhäuser Strasse 3, D-99867 Gotha Machine type: PR 3200 kN x 3100 mm Serial number: 05/460/013 Year of manufacture: 2005 Machine weight: 18,000 kg Electrical data Voltage: 400 V Power: 30 kW Frequency: 50 Hz Phases: 3∼ Max. fuse rating: 80 AT Hydraulic/pneumatic data Fgedpfxozm S Ttj Ap Djh Max. air pressure: 8 bar Technical data (press brake) Force: 3200 kN Max. stroke: 265 mm Max. closing speed: 200 mm/s Pressing speed: 1–10 mm/s Max. O.A. response time: 90 ms Min. ESPE safety distance: 290 mm

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Fgsdpfxoya Iaqj Ap Deh Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: ready for operation (used), Year of construction: 2001, pressure 100 t chamfer lenght 4100 mm distance between columns 3700 mm column arm 415 mm stroke max. 215 mm dayligth 410 mm ajustment speed 200 mm/sec working feed 10.0 mm/sec return speed 150 mm/sec work height max. 1080 mm table width 100 mm Control CYBELEC oil volume 160 ltr. voltage 400 V power capacity 8.5 kW weight 10200 kg range L-W-H 4800 x 1800 x 2600 mm - in checked conditions - machinevideo - ?v=Phcik_oo4CE Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit “DNC 1200 PS/B” * High-resolution screen * Clear, concise menus in the operator's language * Tool and product library * Swiveling control panel, front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge adjustment (X-axis) * 2x manually adjustable stop fingers - Manual upper tool clamping - Manual lower tool clamping - Rear safety device (safety door) - Side safety device (safety doors) - Bending tools * 1x set of split upper tools (ROLLERI TOP 175.26.R08) * 1x set of split 1V dies (V 12 mm) - 2x freely movable 2-hand controls Fodpfx Apsxzuwko Dsgh - 2x freely movable foot switches - Operating instructions for control system

Condition: used, Year of construction: 1978, Hydraulic Shear SAGITA BEYELER 3100 x 4 mm Cutting length: 3100 mm Maxi thickness: 4 mm Electric Back gear gauge travel: 1000 mm Throat depth: 300 mm Year of construction: 1978 13 hydraulic sheet-metal clamps Blue electrical cabinet not used because it was used for the rear sheet metal conveyor There is a slight hydraulic leak at the left cylinder Supplied with a new replacement blade + front stop Voltage: 380 V Length: 3700 mm Depth: 2400 mm Height: 1500 mm Fsdpfxez Nfxgs Ap Dogh Weight: approx 5 T

Condition: excellent (used), Year of construction: 2003, Technical specifications: Working length: 3240 mm Bending capacity, steel: 4.0 mm Bending capacity, stainless steel: 3.0 mm Bending capacity, aluminum: 8.0 mm Control system: DELEM DA65 graphic 2D CNC-controlled: angle, bending radius, and back gauge Bending angle setting: 0 – 150° Upper beam opening: 500 mm Back gauge travel up to 1100 mm, with table extension up to 3000 mm Motor power: 7 kW Dimensions (length x width x height): approx. 5300 x 2350 x 2200 mm Weight: approx. 7.5 tons Accessories: various tools Fgedpfxjz I Ekxs Ap Doh The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Fedpfjzun T Sex Ap Dogh

Condition: good (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 4702, stroke rate (max.): 18 1/min, power: 11 kW (14.96 HP), input voltage: 380 V, input frequency: 50 Hz, operating pressure: 200 bar, overall weight: 5,250 kg, total length: 3,860 mm, total width: 2,500 mm, total height: 1,560 mm, BAYKAL 3100 X 6 Plate Shear - Cutting capacity: 6 mm - Cutting length: 3060 mm FCA D-35614 Aßlar - loaded onto a truck. Fodpfsz Nftksx Ap Dogh

Condition: excellent (used), Technical data: Max. cutting width: 3100 mm Max. cutting capacity (steel ST45): 0.4 - 10 mm Motorized adjustable backgauge: 1000 mm Fgsdpfx Apjyxvgqe Dsh NC control: OPERATOR Stroke: 160 mm Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 3900 x 2200 x 2250 mm Weight: approx. 9 tons The seller accepts no liability for typographical or data transmission errors. The machine's visual condition, technical functionality, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Fgodexyvx Topfx Ap Djh Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1987, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting Fsdpfxjyy Tqco Ap Dogh • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Fgedpfxjru Un He Ap Doh Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Total length:3100mm Fgedpfezc Iztox Ap Dsh Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, sheet thickness (max.): 6 mm, Equipment: emergency stop, finger protection, safety light barrier, in excellent condition, ready for use. Fgjdpfjzlpgbjx Ap Djh

Condition: used, total length: 5,500 mm, total width: 2,400 mm, total height: 2,100 mm, Colour: Yellow Weight: 21.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 5150 Fjdpey Uwp Sefx Ap Degh - Backgauge depth [mm]: 1000 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 21000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, plate width 3200 mm plate depth 2000 mm Fgsdpfx Apsud Ipqj Doh plate height 210 mm weight of the machine ca. / t Clamping plate Dimensions: 3200 x 2000 x 210 mm T-slot dimensions: ? x ? x ? (H)

Condition: used, plate width 3200 mm plate depth 2250 mm plate height 420 mm weight of the machine ca. / t Clamping plate Dimensions: 3200 x 2250 x 420 mm Fsdpsud Iqbefx Ap Dsgh T-slot dimensions: ? x ? x ? (H) The images are for illustrative purposes only. More pictures will follow.

Condition: used, Manual bending machines. The machines are very sturdy, fully operational, and have knives in good condition; rust needs to be cleaned off. Testing is possible. Specification: Manufacturer: Poland Year of manufacture: 2008 – 2012 Working length: 3100 mm Fgjdpfxsymm D Io Ap Dsh Bending thickness: 1.0 mm If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2024, Hydraulic shear MVD I-SHEAR C 3100 – 10 Fgodpfsfh R Ilex Ap Djh complete with pneumatic sheet support at the rear. CNC ESA S 625 TOUCH SCREEN CUTTING ANGLE ADJUSTMENT AUTOMATIC BLADE GAP ADJUSTMENT Cutting capacity for 450N/mm2 material: 10 mm Cutting capacity for 700N/mm2 material: 6 mm Cutting length: 3100 mm Distance between uprights: 3600 mm Variable cutting angle: 0.5 - 3° Sheet clamping cylinders: 14 Strokes per minute: 7 – 13 Throat: 250 mm Motor power: 22 kW Graduated square and two sheet supports: 1000 mm Rear gauge stroke: 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight: 10.5 tons

Condition: excellent (used), Year of construction: 2010, Automatic technological line for sawing wood Technical data: - Max wood diameter 400 mm - Minimum wood diameter 120 mm - minimum timber length 1500 mm - Max log length 3200 mm Fgjdpfx Ajlar Rijp Deh CAPACITY UP TO 200 m3 per shift The machine consists of the following elements: - Log loader - Sawmill longitudinal feeder - Sawmill TT 5/600/400 G - Motors 75 + 90 kW - Receiving roller table with ejecting mechanism for edgings and side boards - Driven roller table - Base table SB 4000 - Multi-saw WP 210 - 2 x 75kW engines - Receiving table - Lower return conveyor of edgings, waste to the chipper The machine is in good condition, in continuous operation - the possibility of viewing during operation

Condition: used, Max. Cutting length: 3100 mm Max. sheet thickness: 6 mm at 490 N/mm² Motor rear stop with digital display Manual cutting gap adjustment Fedpew I Tu Nefx Ap Dsgh Variable cutting length Cutting edge lighting New blades Very good condition

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 602/02, center width: 4,000 mm, center height: 415 mm, spindle speed (max.): 1,600 rpm, controller model: Control System Euro Turn, TECHNICAL DETAILS Maximum turning height: 415 mm Turning diameter over bed: 830 mm Turning diameter over slide: 540 mm Distance between centers: 4,000 mm Spindle bore: 130 mm Spindle speed: 2–1,600 rpm MACHINE DETAILS Control method: Teach-in Control system brand: Monforts Control system type: Control System Euro Turn Power: 55 kW Dimensions & Weight Dimensions (L x W x H): 6,750 x 2,100 x 2,020 mm Net weight: 7,500 kg Transport packages: 2 units Fgedpfx Apjz Ebbzj Doh EQUIPMENT Documentation CE marking

Condition: new, Hydraulic shear MVD 3100 X 6 mm Fgsdofh R Igopfx Ap Djh complete with pneumatic sheet support at the rear Cutting capacity for 450N/mm2 material: 6 mm Cutting capacity for 700N/mm2 material: 4 mm Cutting length: 3100 mm Distance between uprights: 3330 mm Fixed cutting angle: 1.9° Sheet clamping cylinders: 14 Strokes per minute: 18–23 Throat: 250 mm Motor power: 10 kW Graduated square and two sheet supports: 1000 mm Rear gauge stroke: 1000 mm with PNEUMATIC SHEET SUPPORT. Approximate weight: 6000 kg

Condition: used, Year of construction: 2002, sheet thickness: 13sheet length: 3060motor: 30Stroke/min: 12messurements (LxWxH): 4000 x 2300 x 2600weight approx.: 11900Baykal 3100x13 cutting machine– Year of Manufacture 2002 Including 1 set of upper blades and 1 set of lower blades. This high-performance guillotine shear stands out with its robust construction and excellent cutting precision. Its substantial weight ensures stable, low-vibration operation, making it ideal for demanding industrial applications. Technical Specifications: Year of Manufacture: 2002 Cutting Capacity (St 42): 13 mm Cutting Length: 3060 mm Fsdpjzwylxjfx Ap Djgh Main Motor Power: 30 kW Main Voltage: 380 V / 50 Hz / 3 Phase System Pressure: 260 bar Dimensions & Weight: Width: 2300 mm Lenght: 4000 mm Height: 2600 mm Weight: 11,900 kg The machine is currently under power and available for inspection and testing at any time.

Condition: used, functionality: fully functional, total length: 2,400 mm, total width: 1,200 mm, Demmeler 3D welding/clamping table for sale. Main item: - Manufacturer: Demmeler - Type: 3D welding/clamping table - Approximate table size: 2400 x 1200 mm - Used condition - Condition and completeness are shown in the photos. Additional welding tables are also available and can be purchased separately or as a package: - Siegmund 3D welding table 2400 x 1200 mm – EUR 4,900 - Siegmund welding table 1500 x 1000 mm – EUR 2,200 - Siegmund welding/clamping table 1000 x 500 mm – EUR 800 Package price for all 4 welding tables: EUR 11,900 EXW Estonia. Fgedpfx Apszv N Nwj Djh Used equipment, sold as is. Individual sale or package sale can be discussed. Loading: Forklift/pallet handling capability is available on site. We can load the tables onto the buyer’s truck. Transport: Transport is at the buyer’s expense.

Condition: used, Year of construction: 1990, Technical details: pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2630 mm control for program: CNC-Steuerung CYBELEC max. stroke: ca. 215 mm throat: 255 mm dayligth: 410 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back gauge: 500 motorisch table-size: 3100 x 60 mm work height max.: 890 mm connection voltage: 3x380 V / 50 Hz V Fgsdpfx Asu Icdaop Doh total power requirement: 5,5 kW weight of the machine ca.: 7,9 t machine dimensions LxWxH: ca. 3,8 x 1,5 x 2,5 m 500 mm backgauge, width 2570 mm; 2 support frames can be moved manually across the entire width Operation via control panel and/or control stand for two-hand/foot operation Control also via manual control unit incl. accessories in stock i.D. *