Used Biral Inline Pump for sale (9,361)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: AC, type of cooling: air, fuel: electricity, Heating circulation pump, ModulA 80-8 360 RED PN6. Fsdpfezq S Tnox Ap Depn The ModulA heating circulation pump from Biral is available again after being in operation for two years. The reason is the upcoming connection to the district heating network. There are two units in stock. The buyer will pick up the heating circulation pumps in CH-8620 Wetzikon.

Condition: good (used), KSB Etaline GN G11 centrifugal pump Inline centrifugal pump and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fpsdpfxsiu U Txj Ap Djn Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q up to, see data sheet H up to, see data sheet The data for this pump can be found in the data sheet. 1) The sum of the inlet pressure and the head at the zero flow point must not exceed the stated value. Design Block pump in inline design, with a speed-controlled standard motor; the pump and motor shafts are rigidly connected. Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756. Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 80 Nominal size suction/discharge nozzle 210 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN G11

Condition: new, Year of construction: 2020, functionality: fully functional, final pressure: 10 bar, input voltage: 400 V, Nominal diameter DN 65 Delivery head H max. 34 m Operating pressure max. 10 bar Supply voltage 3x400 V Fpsdpfjrq Ey Iox Ap Dsn Frequency 50 Hz Rated current 13.2 A Motor protection WSK

Condition: good (used), KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Protection class: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our store! Fjdpfx Apeq Tqnqe Dopn International shipping costs on request!

Year of construction: 2014, condition: new, Flowserve DURCO Mark 3 ISO Centrifugal Process Pump – Complete Unit For sale: 2x Flowserve DURCO Mark 3 ISO centrifugal process pumps, complete with WEG electric motor and Flowserve mechanical seal support system. Pump specifications: Fedpfx Apez A Avho Dopn Manufacturer: Flowserve / DURCO Series: Mark 3 ISO Model: 3K125-80-315RV Equipment No.: P-401 A Design pressure: 16 barg Design temperature: 70°C Material: Ductile Iron / EN-GJS-400-15 Year of manufacture: 2014 Manufactured in Newark, Nottingham, England Electric motor: Manufacturer: WEG Power: 11 kW Frequency: 50 / 60 Hz Speed: approx. 1465 rpm at 50 Hz Protection class: IP55 Efficiency class: IE3 Ex-rated motor Flowserve seal support system: Flowserve seal reservoir Barrier fluid system ASME VIII Div. 1 Year built: 2013 Complete pump unit mounted on a common steel base frame. Condition: Surplus industrial equipment Quantity available: 2 units Availability: Immediately available Location: Rotterdam, The Netherlands Worldwide shipping can be arranged.

Year of construction: 2024, condition: used, Audoli & Bertola / Gruppo Aturia VHL 382/2 Industrial Vertical Pump with ABB 110 kW Motor Heavy-duty industrial vertical pump manufactured by Audoli & Bertola, a division of Gruppo Aturia S.p.A., complete with a large ABB electric motor. The pump's nameplate indicates a manufacturing date of 11/2024. Pump specifications: Manufacturer: Audoli & Bertola Division: Gruppo Aturia S.p.A. Type: VHL 382/2 Capacity: 317 m³/h Head: 28 m Speed: 1450 rpm Power: 110 kW Year: 11/2024 CE marked Configuration: Vertical industrial pump Large flanged connections ABB electric motor: Manufacturer: ABB Type: M3BP 315SMA 4 V1 Power: 110 kW Year: 2003 Frequency: 50 Hz Speed: approx. 1486–1488 rpm Protection class: IP55 Insulation class: F Duty: S1 Product code: 3GBP312210-BDG Vertical mounting configuration The pump is offered as a complete assembly with the ABB 110 kW electric motor, as shown in the pictures. Condition: Used industrial surplus Location: Rotterdam, The Netherlands The equipment is available from stock and can be inspected before purchase. Fodpfxjz Di Nwj Ap Djpn This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to submit an offer.

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. Fpedpjzrg T Eefx Ap Den System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: used, PPM Rotary Lobe Pump Fpsdpfx Asz E Iawsp Dsn Model LH84L - 4981 PU Ratio - 2.9451 : 1 RPM - 500 Sanitary lobe pump Port size - 90mm flange

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: TRGD 08/5-2.5-550-FcV, input voltage: 230 V, Beinlich Radial Piston Pump in mobile setup Manufacturer: Beinlich pump systems Manufactured: 2008 Viscosity: 100-1000 mPa.s Max pressure: 200 bar. Medium used for: Glycol, Linseed oil, Acrylates Fedpfx Apexiwg Rs Dspn With Lenze series 8200 vector frequency inverter (adjustable speed) Complete with original manuals and diagrams

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Fpodpfsyi H Eqjx Ap Den Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Condition: good (used), Promoted by APEXPUMPS Bristol UK Fpjdpet A U H Iofx Ap Djn -type: HPV32.2-7-30-CDAAKR -serial number: 110150-02 -inclusion dimensions: 1650x400x500mm -operating pressure: 27 bar -max. pressure: 40 bar -mass flow: 360L/min -lifting height: 270m -electrical data: 400V; 30kW

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Dry-running twin pump Dry-running twin pump in an inline design for pipe installation or foundation mounting with an integrated frequency converter for electronic control, including constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled dry-running twin pump in an inline design with flange connection and automatic power adjustment. Application Pumping of heating water (according to VDI 2035), cold water, and water-glycol mixtures without abrasive substances in heating, cold water, and cooling systems. Equipment/Function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Controller operation (n=constant) Manual operating mode Setting of the differential pressure setpoint Setting of the speed (manual operating mode) Setting of the operating mode Setting pump ON/OFF Configuration of all operating parameters Fault acknowledgment External control functions Control input "Priority OFF" Control input "External pump switchover" (only effective in twin pump operation) Analog input 0-10 V, 0-20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal from the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal from the pressure sensor Alarm and display functions Collective fault message SSM Collective operating message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation Safety functions Full motor protection with integrated tripping electronics Access restriction Twin pump management (twin pump or 2 x single pump) Main/reserve operation (automatic fault switchover) Main/reserve operation, pump switchover after 24 hours Addition operation Addition operation (efficiency-optimized peak load switching on and off) Your advantages Energy saving through integrated electronic power adjustment Easy operation thanks to Green Button technology and display Various operating modes: main/reserve operation and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (FMP) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Motor rated power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Emitted interference EN 61800-3 Immunity to interference EN 61800-3 Insulation class: F Motor protection class: IP55 Fsdpfx Aswbqrtep Djpn Motor protection: FMP integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: €29,006.25 More new and used items can be found in our shop! International shipping costs on request!

Condition: used, Grundfos Vertical Water Pump Complete with isolator valve Fpsdjz E Nhvepfx Ap Den Power isolator switch 1.5 kw 5.7 m3/hr H max 60m

Condition: used, Year of construction: 2004, machine/vehicle number: C171571-02, Exzentnerschneckenpumpe von Mono Pumps sehr guter Zustand Fpodpfxoz Ibrre Ap Don

Condition: good (used), KSB Etaline GN Pump Inline pumps and three-phase standard motor with a motor-mounted frequency inverter for stepless speed control. Applications: Heating systems Air conditioning systems Cooling circuits Domestic water systems Water supply Industrial circulation systems Medium: Liquids that do not chemically or mechanically attack the pump materials. Operating data: 1450 rpm Fpsdpfsivd Dksx Ap Don Design: Block pump in an inline design, with a speed-controlled standard motor; the pump and motor shafts are rigidly connected. Bearings: Deep groove ball bearings, grease-lubricated. Shaft seal: Uncooled and maintenance-free mechanical seal according to EN 12 756. Drive: Surface-cooled three-phase standard motor with a motor-mounted frequency inverter and radio interference filter according to DIN EN. Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 65 Nominal size of suction/discharge nozzle: 160 Item condition: used

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multi-stage centrifugal pump with opposing suction and discharge nozzles (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal ensures high reliability and ease of maintenance. Power transmission is via a rigid, split coupling. Fpjdpfx Apowbfige Den The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer's product group: Vertical centrifugal pumps Manufacturer's product range: Vertical centrifugal pump CRN Manufacturer's article number: 96122358 Connection, inlet side: Flange Connection, outlet side: Flange Connection standard, inlet side: EN 1092-2 Nominal diameter, connection, outlet side: DN 65 Design: Vertical Speed: 2924 rpm Motor output power: 11.0 kW Protection class: IP55 Max. head: 90.2 m Max. operating pressure: 16 bar Weight: 193.2 kg List price: €14,844.00 You can find more items in other sizes - new and used - in our shop! International shipping costs available upon request!

Year of construction: 2012, condition: excellent (used), Item: DP-05180 Fodpsh Inqijfx Ap Depn Rotary lobe pump JEC Type ZF -120-021 From 2012, Inlet 1,5", Outlet 1,5". Engine: 5.5 kW Complete Stainless Steel

Condition: good (used), KSB Etaline GN G10 Pump Inline pumps and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q 17.50 m3/h H 5.8 m Please refer to the data sheet for further information on this pump. 1) The sum of the inlet pressure and the delivery head at zero flow rate must not exceed the specified value. Design Block pump in inline design, with speed-controlled standard motor, pump and motor shaft are rigidly connected. Fpjdsd Sqkzepfx Ap Den Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 65 Nominal size of suction/pressure nozzle: 160 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB Etaline GN G10 pump

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) Fpsdpfsxx Avpex Ap Den • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: new, Wilo CronoLine-IL 50/270-4/4-S1 Single-Stage Dry-Running Centrifugal Pump. Single-stage dry-running centrifugal pump in inline design for pipe installation or base mounting. Low-vibration and low-noise block design with lantern and rigidly connected standard flange motor (standard motor). With forced circulation, direction-independent bellows mechanical seal and cavitation-reducing impeller. Flanges with pressure gauge connections R 1/8. Manufacturer: Wilo Product name: CronoLine-IL 50/270-4/4-S1 Net weight approx.: 101 kg Item number: 2171212 Operating data Min. medium temperature Tmin: -20 °C Max. medium temperature Tmax: 140 °C Min. ambient temperature Tmin: -15 °C Max. ambient temperature Tmax: 40 °C Maximum operating pressure PN: 16 bar Design note: 16 bar up to 120 °C, 13 bar up to 140 °C Minimum efficiency index (MEI): ≥0.4 Motor data Motor efficiency class: IE3 Mains connection: 3~400 V, 50 Hz Fsdpfx Apspgq Dke Dspn Voltage tolerance: ±10 % Rated motor power P2: 4000 W Rated speed n: 1450 1/min Rated current IN: 8.2 A Power factor cos φ: 0.79 Motor efficiency ηM 50%: 85.8 % Motor efficiency ηM 75%: 87.6 % Motor efficiency ηM 100%: 88 % Insulation class: F Enclosure: IP55 Installation dimensions Suction-side pipe connection DNs: DN 50 Discharge-side pipe connection DNd: DN 50 Length l0: 440 mm You can find more pumps – new and used – in our shop! International shipping costs on request!

Condition: good (used), Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, drive motor, traction motor -Manufacturer: Axial Pump, hydraulic pump Fpodpfx Asyzfh Asp Den -Type: APVC-13 -Shaft: Ø 16 x 40 mm -Bolt circle: Ø 64 mm M6 -Dimensions: 245/200/H250 mm -Weight: 9.3 kg

Condition: good (used), Busch Vacuum Pump Model 630 370 CFM Fpjdpfx Apswa Nzqs Den

Condition: good (used), Busch Vacuum Pump Fsdpfx Aowa Ra Ujp Dspn Model 400

Condition: good (used), Busch Vacuum Pump Type: 400-212 235 CFM Fjdpfx Aowa Ucgop Djpn Dimensions: 1300 mm x 800 mm x 1100 mm.

Condition: good (used), Busch Vacuum Pump Model 400-212 Fpjdpfxewa Unpo Ap Den