Used Brunner-Anliker Nut And Cheese Grater for sale (6,742)

Year of construction: 2015, condition: excellent (used), Nut and cheese grater with the tried-and-tested Brunner-Anliker pre-rotation system, output up to approx. 500 kg/h. Psdpfx Anjh Rmrkstspt

Year of construction: 2016, condition: like new (used), functionality: fully functional, We are offering this as-new Brunner Anliker PKR-S grater for nuts, cheese, chocolate, etc., year of manufacture 2016. Includes two grating drums: 2.5mm and 5mm. The PKR-S nut and cheese grater is specifically designed for commercial and batch operations. The material to be grated is gently and loosely processed through hand-finished grating plates using the proven pre-rotation system without mechanical pressure. Thanks to the mobile base frame, the machine can be used flexibly. For easy and hygienic cleaning, the PKR-S is made entirely of stainless steel. The machine has only been used a few times and is therefore in very good condition. If you have any questions or require further information, please feel free to send us a message or give us a call. Pedpfx Asygnnnjntept

Condition: good (used), H.Biaugeaud A404 HB Cheese grater Stainless, previously used for grating cheese, two grating attachments, mobile, 3Ph Psdpfjvcdl Rjx Antept

Condition: used, Year of construction: 1993, machine/vehicle number: 2.4836.93, functionality: unexamined, input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: AC, temperature: 80 °C, number of chambers: 1, Equipment: documentation/manual, We offer a vacuum dryer. This system can dry 4.8–5.5 m³ of wood. The unit is in good condition and can be inspected by appointment. Ppodpfxey En Iyo Antet

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Ppodpfewric Eex Antet

Condition: as good as new (ex-display), The KMT M 1303 Guillotine Shear from KNUTH is engineered for precise and reliable cutting, making it an essential tool in the Sheet Metal Processing category. Featuring a robust solid steel construction, this modern plate shear is equipped with a powerful drive motor that allows for efficient operation. With its straight cutter angle, it minimizes workpiece torsion during cutting while providing a high-precision manually adjustable back gauge for exact positioning. The dual-sided reversible upper cutters and four-edge lower cutters enhance the lifespan and versatility of the machine. Ergonomically designed, the bright LED illumination of the cut line and a clear view from above ensure accurate alignment. A mobile foot switch offers operators the flexibility to manage the workpiece safely, while essential features such as a cut counter and accessible lubrication points promote efficient maintenance. This reliable and powerful Guillotine Shear is perfect for your workshop needs—request a quote today to enhance your Sheet Metal Processing capabilities with the KMT M 1303. Psdpfxjww Uaae Antopt

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Ppsdod Tbbdepfx Antst Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg Ppjdpfsfdkb Ujx Antst - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing Pedoguk A Hjpfx Antept - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Pjdsfdkbhspfx Antopt The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Pjdsguk Dkjpfx Antspt When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth Ppsdpfeqt Dmysx Antjt - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Podpfx Aeguk Dvsntjpt Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2011, operating hours: 10,150 h, Manufacturer: BRANDT Model: Ambition 1600 GC Grooving unit Equipment: Pre-milling unit – DIA heads Maximum edge thickness: 12 mm Feed speed: 18 m/min Pneumatic unit Maximum edge height: 66 mm Glue granulate container Trim saw, 2 motors, straight or chamfered cut End rounding unit, 2 motors Profile scraper Flat scraper Polishing machine Dimensions: Length: 6600 mm Width with grinding disc: 1400 mm Height: 1800 mm Ppjdoywzc Iepfx Antjt Weight: approx. 2900 kg

Condition: new, Year of construction: 2026, Included in delivery: 01x End Bracket Extension, new Material color: electro-galvanized Design: universal Total height: approx. 657 mm Usable height: approx. 500 mm Telescopic depth adjustment: 600 – 1,150 mm Frame profile: L-profile 45 x 45 mm Material thickness: approx. 5.00 mm Square tube: 25 x 25 x 1.50 mm (outer) Square tube: 20 x 20 x 1.50 mm (inner) Adjustment grid: 25 mm Hole pattern: 5 x 25 mm Weight per piece: approx. 6.87 kg Your contact persons in our company: Mr. Andre Evering Psdpfx Ansvbbtiotspt Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping of this item is required, this will incur additional costs, which can be quoted separately depending on location and scope of delivery.

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, We offer these ready-to-use AUMA actuators and JC Spain gate valves, 10" to 42" gate valves with actuators, model "Valves for Oil Industry," year of manufacture 2016. High-performance gate valves Sizes: 10" to 42" Pressure class: 600 lbs, Stellite 6 hardfacing and 13% Cr trim (internal parts) BWE (butt-weld ends), wedge type gate valve, bolted bonnet, OS&Y ASTM A-216 WCB (cast carbon steel) The majority of units are equipped with explosion-proof, intelligent AUMA AUMATIC ExC actuators. Optionally, we can refurbish the actuators and gate valves and provide a factory acceptance test (FAT). Actuator manufacturer: AUMA Riester GmbH & Co. KG Model: 10" to 42" gate valves with actuator - 42" gate valves (2 units): equipped with AUMA SAEX 30.1 actuators. - 32" gate valve (1 unit): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (4 units): equipped with AUMA SAEX 16.2 / ACEXC 01.2 / GK40.2. - 30" gate valves (2 units): handwheel (can be fitted with actuators). - 16" gate valves (9 units): equipped with AUMA SAEX 14.6/GK30.2 Germany actuators (Ex-proof). - 10" gate valve (1 unit): handwheel Location: Ras al Khaimah, UAE If you have any questions or need further information, please feel free to send us a message or give us a call. Pedpfx Aoy D Ilisntspt

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Ppodpfxjq Nx Alj Antot Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: used, empty load weight: 3,450 kg, maximum load weight: 7,050 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 08/2021, next inspection (TÜV): 11/2026, loading space length: 6,200 mm, loading space width: 2,460 mm, suspension: steel, tire size: 235/75 R17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R17,5, rear tire size: 235/75 R17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Steel floor, hydraulic ramps, lashing rings, -- Printing errors, mistakes and changes reserved, sample images --, More data at: !, More Details: ! Pedpfxoy Ulfuj Antspt

Year of construction: 2015, condition: excellent (used), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Ppsdpfx Aok Eakventst Year: 2015 Electrical data: -230 V -0,7 A -50 Hz -IP 65

Condition: excellent (used), Year of construction: 2015, Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0,7A Psdpslatz Dsfx Antspt - 50 Hz - IP 65 Inclusion dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Condition: used, empty load weight: 4,040 kg, maximum load weight: 14,960 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 01/2019, next inspection (TÜV): 08/2026, loading space length: 6,880 mm, suspension: other, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Ppodpfx Aney T E Hvetet

Condition: used, empty load weight: 3,130 kg, maximum load weight: 8,770 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 12/2015, next inspection (TÜV): 09/2027, loading space length: 5,100 mm, loading space width: 2,420 mm, loading space height: 1,500 mm, loading space volume: 18 m³, suspension: steel, tire size: 235/75R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75R17,5 143J, rear tire size: 235/75R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 500 mm sidewalls, + 1,000 mm mesh extension, lashing rings, vehicle hot-dip galvanized and painted, surcharge for ramps: €1,000; -- Misprints, errors and changes reserved, sample images -- More data at: !, More details: ! Ppodpfx Aney T E E Sotjt

Condition: used, empty load weight: 4,560 kg, maximum load weight: 13,440 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2021, next inspection (TÜV): 07/2026, loading space length: 5,130 mm, loading space width: 2,420 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Combination tailgate, lashing eyes, twin tyres, surcharge for ramps: €800; -- Printing errors, mistakes and changes reserved, sample images -- More data at: !, More details: ! Pjdpfx Aoy T E Dhsntjpt

Condition: used, empty load weight: 2,860 kg, maximum load weight: 9,040 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 08/2018, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: other, tire size: 235/75 R17,5 143J/, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R17,5 143J/, rear tire size: 235/75 R17,5 143J/, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , Surcharge for ramps €800, , -- Printing errors, mistakes and changes reserved, sample images --, More data at: ! More details: ! Ppedjy Tlmvopfx Antot

Condition: good (used), machine/vehicle number: 110283-110155, Year of construction: 2012, AUTOMATIC LINEAR HANDLE APPLICATOR MACHINE MANUFACTURER AND&OR MODEL 50SIA3000R&P2 SERIAL 110283-110155 YEAR 03/2012 CAPACITY 3000 Bph Included: * Bunker for handles & tranportation convejor * Handle side rejection system OMRON ALSO FOR SALE : TRINE T4400 Labelling machine €17,800 with HOT MELT glue. Pedsquuv Iopfx Antept S/N: 032M44045 Labelling speeds: 60 to 350 cpm USED Wrap around labeller used for PET bottles. Used with 0.33 / 0.5L / 1.5L Volume