Used Bt Rr B2 for sale (4,602)

Condition: good (used), Year of construction: 2008, Reach truck, BT, 1.6 t, lift height 5.40 m, - used - : Price (net, ex location): only €4,950! Manufacturer: BT Model: RR B2 Year of manufacture: 2008 Rated capacity: 1,600 kg Weight without battery: 2,235 kg Battery weight: max. 1,074 kg / min. 865 kg Battery voltage: 48 V Lift height: 5,400 mm Load center: 600 mm At load center 800 mm: rated capacity 1,250 kg Including charger Condition: good Hodpfx Aoxv Tndjbtot Available: approx. from early December Location: Düsseldorf

Condition: good (used), functionality: fully functional, Year of construction: 2006, Reach truck BT RR E3 Year of manufacture: 2006 Lifting height: 9.5 m Height: 3.86 m Few operating hours Free lift Side shift Camera with screen Lifting height pre-selection Lifting height display Pivoting cabin Battery defective / without battery Without charger If required, we can offer you a battery and a charger. Hodpsv Azt Sefx Abtet

Condition: good (used), functionality: fully functional, Year of construction: 2006, Reach truck BT RR E3 Year of manufacture: 2006 Hedpfov Aztfsx Abtjt Lifting height: 8 m Height: 3.38 m Few operating hours Free lift Side shift Camera with screen Lifting height pre-selection Lifting height display Pivoting cabin New drive wheel Battery defective / without battery Without charger If required, we can offer you a battery and a charger.

Condition: refurbished (used), battery capacity: 375 Ah, battery voltage: 48 V, total height: 650 mm, total length: 984 mm, total width: 415 mm, Tested forklift battery for your truck – 48V 3PZS 375Ah – Special tank + 1 year warranty + Including Aquamatik (automatic watering system) + Including end connectors & REMA 320 plug (other plugs can be installed if required) + Capacity: min. 90–100% (C5 capacity report supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length: 984 mm Width: 415 mm Height: 650 mm Weight: approx. 580 kg Suitable for the following models and others: Toyota 2FBE10 Toyota 2FBE13 Toyota 5FBE10 Toyota 5FBE13 Toyota 7FBE10 Toyota 7FBE13 Toyota 7FBR13 Hedpfx Absy Rnmajtot Toyota 7FBRE16N Toyota/BT RR-M 14 Toyota/BT RRE 140 M Toyota/BT RRE 160 M Atlet ET 150 Komatsu FB13M-2 Mitsubishi FB13TCA Mitsubishi FB15TCA Nichiyu FB13 Nichiyu FBT13 Nichiyu FBT13-18 Nichiyu FBT15 Nissan N01L13 Gjbnswqdtis Nkmgxsbp Nissan N01L13U Nissan S1N1L13Q Nissan TX13 Nissan TX15 Nuova Detas SE 315 Rocla TMF131 UniCarriers AS1N1TX13 Common battery sizes available – please inquire. Transport possible.

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 847 mm, total length: 694 mm, total width: 647 mm, Tested forklift battery for your truck - 48V 4PZS 620AH - special tray + 1 year warranty + incl. Aquamatic watering system + incl. end connectors & REMA 320 plug (other plug types can be fitted on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Hedpfxey Rnins Abtst Dimensions: Length 694 mm Width 647 mm Height 847 mm Weight: approx. 920 kg Suitable for the following models and others: Jungheinrich ESE 430 Jungheinrich ESH 450 Jungheinrich ETH Jungheinrich ETM 214 Jungheinrich ETV 320 Toyota 6FBRE12 Toyota 6FBRE14 Toyota 6FBRE20 Toyota 7FBRE16 Toyota 7FBRE20 Toyota/BT OME 100 H Toyota/BT OME 120 HW Toyota/BT RR-B 2 Toyota/BT RR-B 3 Toyota/BT RR-E 2 Toyota/BT RR-M 6 Toyota/BT RR-N 3 Toyota/BT RRE 140 Toyota/BT RRE 160 Toyota/BT RRE 180 Toyota/BT RRE 200 C Baoli KBE 20 Baumann DANCER Caterpillar NR14H Caterpillar NR16NH Clark CRT 14/16/20 Clark TMX 15 Fiora PK200 Combilift AISLE-MASTER 15 E Heli CPD 20 Heli CPD 25 Hubtex MQ 20 Hubtex MQ 25 Hubtex MO 30 Hyster J2.0-2.5GX Hyundai 25BRJ-9 Mitsubishi RB14NH Mitsubishi RB16K Mitsubishi RB16NH Common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 48 V, total height: 784 mm, total length: 835 mm, total width: 742 mm, Tested forklift battery for your truck – 48V 6PZS 930AH – DIN A + 1 year warranty + incl. Aquamatic system + incl. end discharge lead & REMA 320 connector (other connectors available upon request) + Capacity: min. 90–100% (C5 capacity protocol is included upon delivery) + Year of manufacture: 2024 Dimensions: Length 984 mm Width 630 mm Height 650 mm Weight: approx. 1,050 kg Suitable for the following models and more: Linde E 18 – 322-00 Linde E 18 – 386-02 – side battery change Linde E 18 Z – 322-00 Linde E 20 PHL – 335-00 Hjdpfxoy Rntyo Abtet Linde E 20 PHL – 386-00 Linde E 20 PHL – 386-02 Linde V – 5213-00 Linde V – 5213-01 Linde V MODULAR – 5213-00 Linde V MODULAR – 5214-00 Toyota/BT RR-B 8 Common battery sizes available on request. Transport possible.

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 48 V, total height: 630 mm, total length: 979 mm, total width: 434 mm, Tested forklift battery for your forklift - 48V 4PZS 500Ah - special battery tray + 1 year warranty + includes aquamatic system + includes final discharge cable & REMA 320 plug (other connectors can be installed on request) + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of delivery: 2024 Dimensions: Length 979 mm Width 434 mm Height 630 mm Weight: approx. 750 kg Suitable for the following models and others: Still R 20-14 Jungheinrich ETV A 12.5 Toyota 2FBE15 Toyota 5FBE15 Toyota 5FBE18 Toyota 7FBE10 Toyota 7FBE15 Toyota 7FBRE16 Toyota 8FBE15 Toyota 8FBE15T Toyota 8FBKT16 Toyota 8FBMT15 Toyota FTB15-E2S Toyota/BT RR-B 2 Toyota/BT RR-B 3 Toyota/BT RR-M 14 Toyota/BT RR-M 3 Toyota/BT RR-M 6 Toyota/BT RR-N 3 Crown 3.0 Crown SC 4220 Crown SC 5320-1 Crown SCT 6020 Atlet ET 150 Atlet ET 180 Balkancar EV698 CTC PLANET PL416/420/423 Caterpillar EP15CPDJ Caterpillar EP15PNT Caterpillar EPB4A Daewoo B13 Daewoo B13 T-2 Daewoo B15 Daewoo B15 T Daewoo B15 T-2 Daewoo B15 T-5 Daewoo BT15 Datsun 150 Doosan B13T Doosan B157-5 Doosan B15T-5 Doosan B15T-7 Doosan B20T-2 Heli CPD 15 Heli CPD 18 Heli CPD 25 Hubtex MQ 35 Hyster J1.80-2.00XMT Hyundai 15BT-7 Hyundai 15BT-9 Hyundai 16B-9 Hyundai 16B-9F Hyundai 20BRJ-7 Hyundai 25BRJ-7 Hyundai HBT18T-S Komatsu FB15-12 Komatsu FB15M-2 Komatsu FB18 Manitou ME 313 Manitou ME 315 Hsdpfsy Rnkfsx Abtot Mitsubishi FB13PNT Mitsubishi FB15PN Nichiyu FBT13 Nichiyu FBT15-30 Nichiyu FBT18 Nichiyu FBT20PN Nissan 01L150 Nissan 1N1 TX Nissan 1N1L18HQ Nissan 1N1L18Q Nissan A1N1L18Q Nissan N01L150 Nissan N01L15U Nissan TX15 Nissan TX18 Nuova Detas SE 315 OMG ERGAS 16 TA 4 TCM FTB18-E1 UniCarriers TX3-15S Yale ERP 16 ATF Yale ERP 18 ATF Common battery sizes available – please inquire. Transport possible.

Condition: used, machine/vehicle number: 25107, Year of construction: 2001, operating hours: 6,431 h, load capacity: 1,600 kg, lifting height: 6,660 mm, free lift: 2,200 mm, fuel type: electric, mast type: triplex, construction height: 2,980 mm, .: 25107 Device details: Year of manufacture: 2001 Load capacity: 1600 kg Lift height: 6660 mm Read operating hours: 6431 h Free lift: 2200 mm Mast type: Triplex Mast height: 2980 mm Length/Width/Height: 1800 / 1270 / 2160 mm Operating weight: 3595 kg Battery from: 2001 Hjdpfx Abstw A Iwotst ---- Equipment: * Protective roof * 3rd valve * Full free lift ---- Additional device information: ---- The operating hours stated are generally those read from the hour meter. We are happy to offer you suitable transportation. Another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We are happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 AM to 4:00 PM. We look forward to hearing from you! We speak English Interim sale and errors in this offer are expressly reserved. In dealer business, the device is sold as-is, not refurbished. All information without guarantee, errors and changes reserved.

Condition: good (used), Year of construction: 2009, Reach Truck, Toyota, BT Reflex ACi- RRB7 – used - : Hedpoyrq Twofx Abtst Price ex location: €9,500 (net)! Manufacturer: Toyota Stapler Model: BT Reflex ACi- RRB7 (No. 69) Year of manufacture: 2009 Battery from 2016 Manual telescopic fork tines Lifting height: 8,000 mm Mast height: 3,398 mm Operating hours: approx. 5,440 h Condition: Overall condition is good, with regular inspections always carried out and any detected defects immediately rectified. Available: immediately Location: D-79576 Weil am Rhein

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 847 mm, total length: 814 mm, total width: 649 mm, Tested forklift battery for your forklift - 48V 5PZS 775Ah - Special Tray 2 + 1-year warranty + Including aquamatic system + Including end discharge cable & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90-100% (C5 capacity certificate provided upon delivery) + Year of delivery: 2024 Dimensions: Length: 814 mm Width: 649 mm Height: 847 mm Weight: approx. 1,100 kg Suitable for the following models and others: Toyota/BT RR-B 3 Toyota/BT RR-B 7 Toyota/BT RR-E 4 Toyota/BT RRE 160 Hodpoy Rnnksfx Abtet Toyota/BT RRE 180 Toyota/BT RRE 200 Toyota/BT RRE 250 Toyota/BT RRE 250 E Toyota/BT VRE 125 Toyota/BT VRE 150 Crown ESR 5280 Caterpillar NRM25K Combilift AISLE-MASTER 15 SE Doosan B20NS Heli CPD 18 Hubtex MQ 30 Hyster J2.0-2.5GX Hyundai 20BRJ-7 Indos S16 Other common battery sizes available on request. Transport can be arranged.

Year of construction: 2003, condition: excellent (used), EMC network filter Manufacturer: Hitachi For frequency inverters Filter for FFFB - SJ300-750/900 HF, L 300, 100 HF Further details, see image 3 x 220 Amps Length: 1000 mm Width: 300 mm Hedpfx Asgrhimsbtjt Height: 190 mm

Condition: reconditioned (used), functionality: fully functional, We offer refurbished turbines from a continuous blasting machine – Rösler RRB 22/5-L. Turbine type: Hurricane H42. The stated price is for 1 unit. Turbines are refurbished using original spare parts made of tool steel. Blasting machine, blasting nozzle, blasting and sanding, sandblasting, blasting, shot blasting turbine. Hjdpfx Aoztp Alobtst

Condition: used, Year of construction: 1980, Paper bag making machine 3 colors flexo inline Photocell bag widht: 170 - 280 mm tube lenght: 300 - 600 mm Hjdpjy Umq Ssfx Abtjt gusset: 60 - 150 mm

Condition: used, axle configuration: 2 axles, total width: 25,000 mm, total height: 40,000 mm, Year of construction: 2014, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by telephone). MÜLLER MITTELTAL SF32BM/BT Concrete Mixer Semi-Trailer Superstructure: Liebherr HTM 1004 10m³, BPW axles, drum brakes, spring-loaded brakes, Wabco ABS, 1st axle liftable, air suspension, permissible total weight: 32,000 kg, unladen weight: 6,510 kg, payload: 25,490 kg, tire tread depth: 1st axle 14-15mm, 2nd axle 10mm Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) is happy to assist you. Further information can be found on our homepage. ... Subject to errors, changes, and prior sale!!! = Further Information = Hjdpfx Abeyfu Sdotst GVW: 32,000 kg Please contact Tobias Ebert for further information.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 050.940-08, LUTRO Painting and Drying System – 2 Booths + Dryer – Year of Construction 2008 Hsdpfx Aozwvb Ajbtet Price: €24,900 (negotiable) net Dismantling and removal to be carried out by the buyer For sale is a comprehensive LUTRO painting and drying system for professional/industrial use. The system was manufactured in 2008 by LUTRO Luft- und Trockentechnik GmbH and, according to the available nameplates, consists of two booths and one dryer. The system also includes the existing ventilation/filtration system, heating/burner technology, and the electrical control system with a Siemens SIMATIC touch panel. The system is currently still assembled on-site. This allows a prospective buyer to gain a good impression of the layout, components, and scope of the system before purchase. System components: 1. LUTRO KSP 7 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 7 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 127 m³ Connected power according to nameplate: 7.5 kW Air velocity: 0.24 m/s Air flow rate: 24,000 m³/h Minimum exhaust air volume flow: 1,440 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,713 g Maximum permissible solvent quantity during spray operation: 80,000 g/h 2. LUTRO KSP 8 BT Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: KSP 8 BT Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.5 m Max. component width: 3.5 m Max. component height: 2.5 m Max. wheel load: 1,000 kg Usable volume: 122 m³ Total steam volume: 178 m³ Connected power according to nameplate: 11 kW Air velocity: 0.23 m/s Air flow rate: 30,000 m³/h Minimum exhaust air volume flow: 1,800 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 2,321 g Maximum permissible solvent quantity during spray operation: 100,000 g/h 3. LUTRO TR 1 Dryer Manufacturer: LUTRO Luft- und Trockentechnik GmbH Type: TR 1 Year of Construction: 2008 Manufacturer's Part Number: 050.940-08 Max. component length: 6.0 m Max. component width: 3.5 m Max. component height: 2.0 m Max. wheel load: 700 kg Usable volume: 81 m³ Total steam volume: 107 m³ Connected power according to nameplate: 4 kW Air velocity: 0.15 m/s Air flow rate: 15,000 m³/h Minimum exhaust air volume flow: 900 m³/h Maximum permissible oven temperature: 90 °C Maximum permissible solvent quantity per drying cycle: 1,307 g Maximum permissible solvent quantity during spray operation: 50,000 g/h Equipment / existing components Based on a visual assessment, the system includes, among other things: 2 LUTRO booths 1 LUTRO dryer Large-area floor extraction with grating Ceiling filter/supply air system Supply and exhaust air technology Ventilation units Heating/burner technology Air ducts Electrical switch cabinets LUTRO system control Siemens SIMATIC touch panel Booth doors and personnel doors with viewing windows Lighting and other existing system equipment In principle, the system scope present on-site will be sold. Condition The system is in used condition, reflecting its age, and is currently still assembled. Important note regarding dismantling and transport Dismantling is not included in the purchase price. Price €24,900 (negotiable) net Inspection / further information An inspection of the system is possibl

Condition: used, functionality: fully functional, machine/vehicle number: VR 1,25M, Year of construction: 1998, operating hours: 12,000 h, lifting height: 7,000 mm, empty load weight: 1,075 kg, total height: 7,000 mm, Equipment: full service history, pallet forks, sideshift, BT VR 1.25 M reach truck, 48V Year of manufacture: 1998 Operating hours: 12,000 hours Hedpfxozl R Ers Abtot New battery, May 2026; TAB 560Ah - battery warranty: 24 months Lifting height: 7 meters, load capacity: 1,075 kg Regularly serviced Selling price: €5,500.

Condition: new, Year of construction: 2024, The SCHORR RR500 DHKB 2 PRO track dumper is a versatile machine powered by a powerful 270 cm3 4-stroke petrol engine with 9.2 hp. This power enables the dumper to operate effortlessly even in outdoor applications and offers sufficient power for demanding tasks. Advantages of the SCHORR RR500DHKA2 track dumper: -- Powerful 9.2 hp four-stroke engine -- Robust chain drive for high traction -- 500 kg payload -- Removable side walls for more loading volume -- Automatic opening of the front when tipping -- Folding ride-on platform as standard -- 6 forward and 2 reverse gears The box body made of robust sheet steel is equipped with removable side walls so that the loading area can be flexibly enlarged and tipping operations are possible without any problems even on slight inclines. A generous tipping angle ensures that even fully loaded skips can be emptied completely without the need for manual assistance. A major advantage of the dumper is the automatic opening of the front of the tipper body during the tipping process. This ensures particularly easy and convenient unloading, even when fully loaded. The hydraulic tipping drive enables the tipper body to be raised and lowered effortlessly, while the extra-large hydraulic oil tank with integrated oil filter extends the service life of the machine and reduces maintenance requirements to a minimum. The powerful track drive ensures that even uneven terrain, inclines and kerbs can be mastered with ease. The durable rubber tracks provide a secure footing in any working environment. Technical data: Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR500 Model: DHKB2 Load capacity: 500kg Tilt drive: Hydraulic (stepless) Travel drive: Chain Weight without/with packaging: 305kg / 335kg Hjdpou Th Ekefx Abtjt Drive system Engine: Air-cooled 1 cylinder four-stroke engine (OHV) Starter: Reversing starter Power: 9,2PS Gearbox: 6 forward gears / 2 reverse gears Speed: forward gear Forward gear: max. 8km/h Reverse gear: max. 5 Liquids Fuel tank capacity: 6L (unleaded petrol) Hydraulic oil tank capacity: 3L (ISO VG 32) Transmission oil capacity: 1.5L (SAE 80W-90) Engine oil tank capacity: 0.9L (15W-40) Basic dimensions Overall length platform folded: 1870mm Overall length platform unfolded: 2105mm Overall width (incl. chain): 770mm Overall height: 1050mm Container dimensions (inside): 1040 x 700 x 300mm Container dimensions (outer dimensions): 1100 x 755 x 310mm Load volume (painted): ~ 218L Load volume (heaped): up to 500L (depending on load) Drive chain dimensions: 180 x 60 x 38mm Packaging size: 1600 x 770 x 1270mm Filling height with walls: 740mm without: 445mm It goes without saying that all spare parts are always in stock and available quickly if required. If technical support is required, our trained team is at your side. We can also carry out repairs for you in our own workshop. We at SCHORR will be happy to answer any questions you may have about our motorized wheelbarrows. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, axle configuration: 3 axles, loading space length: 1,35,000 mm, loading space width: 24,900 mm, loading space height: 22,200 mm, total width: 26,000 mm, total height: 37,300 mm, Year of construction: 2012, Equipment: ABS, = Additional Options and Accessories = Hodsy Svrtepfx Abtet - EBS – Electronic Braking System - Rear air suspension - Front air suspension - Disc brake system = Notes = For vehicle inquiries, please contact Mr. Seidel (by phone at ...). RSK/34 IV refrigerated trailer with tail lift Body cooling: Carrier Vector 1850, tail lift: Palfinger 2500KL (2,500 kg), additional side spotlights left, right, and at the rear of the vehicle, air suspension, Duomatic trailer coupling, Daimler axle, Wabco ABS, disc brakes, spring-loaded brakes, 3rd axle steered, 1st and 2nd axle liftable, cargo compartment dimensions: length: 13,500 mm, width: 2,490 mm, height: 2,220 mm, tire tread depth: 1st axle 12–13 mm, 2nd axle 10–16 mm, 3rd axle 9–16 mm, gross vehicle weight: 34,000 kg, unladen weight: 9,980 kg, payload: 24,020 kg. On request, we can provide you with a leasing or financing offer. Mr. Seidel (phone ...) will be happy to assist you. For more information, please visit our website. ... Errors, changes, and prior sale excepted! Steered axle = Further Information = Unladen weight: 9,980 kg Payload: 24,020 kg GVW: 34,000 kg Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2012, operating hours: 3,005 h, lifting height: 4,150 mm, free lift: 1,960 mm, fuel type: electric, mast type: duplex, fork length: 1,150 mm, total height: 2,620 mm, color: other, GVW: 1.582 kg Hedpfxozxqbms Abtet Lifting capacity: 1.200 kg NEW BATTERY CELLS 24V 3PzS 270Ah, 220V high-frequency charger, Fork length 1150 mm, Fork spacing 660 mm, Machine width 900 mm, Power steering, Duplex-Freelift mast, Well maintained!

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph = Additional options and accessories = - Originally painted - Tool box = Remarks = BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool Hsdpfxsx D A R De Abtst and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, overall weight: 1,000 kg, total length: 3,200 mm, total width: 600 mm, input voltage: 400 V, inner dimension width: 580 mm, Equipment: rotational speed infinitely variable, Brand RÖSLER Type R2000 1 BT Electrical connection 380V Dimension L (Length) 3200mm Dimension W (Width) Hedpozfwl Sjfx Abtot 1400mm Dimension H (Height) 1850mm

Year of construction: 1994, operating hours: 32,303 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, second-hand Manufacturer: Reifenhäuser Type: BT 1000-2-63 K Year of construction: 1994 Machine no.: 32061 Operating hours: 32,303 hours Screw geometry: conical for PVC-hard profiles Screw diameter: 63 - 121 mm Screw length: 1300 mm Screw speed: max. approx. 32 1/min. Nominal torque from gearbox: 1000 daNm Dynamic load rating of the back pressure bearing: 103600 daN Motor power: 43.0 kW, Hodpfx Absyhcghetet Drive motor: Baumüller DC motor Barrel heating/cooling zones: 4/3 (air cooling with fan) Adapter heating zones: 1 Tool heating zones: 5 Temperature control: digital temperature controller (2 x PSG Multipact 88) Max. permissible melt pressure: 500 bar Output: approx. 150 - 200 kg/h for rigid PVC profiles Accessories: Dosing device and material hopper Extrusion height: 1150 mm Dimensions: 4250 x 1200 x 1750 mm without hopper (LxWxH) Weight: approx. 3000 kg Condition: The machine came directly from production and was cleaned by us, repainted (RAL 7035, light gray) and checked for function. Barrel and screws are in a good condition.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01.01.0555, turning diameter over cross slide: 850 mm, spindle bore: 102 mm, turning diameter: 1,200 mm, turning diameter over bed slide: 850 mm, turning diameter over top slide: 1,600 mm, center height: 600 mm, center width: 800 mm, spindle speed (max.): 400 rpm, type of input current: three-phase, overall weight: 15,000 kg, Gurutzpe Super BT 600 x 3000mm lathe, with dimension display and probe-based copying function, swing over bed 1180mm, swing over cross slide 850mm, swing over carriage 1570mm, distance between faceplate and carriage 620mm, spindle bore 102mm, speeds 2.8-400 rpm, 30 hp motor, four-jaw chuck with a diameter of 1000mm, bed width 800mm, tailstock spindle diameter 140mm, maximum weight on lathes between centers 10 tons with a steady rest of 12 tons, estimated weight of the lathe and accessories 15000kg, in very good condition. Hedpfx Abjztz Hcotot

Condition: excellent (used), Year of construction: 2016, operating hours: 2,241 h, lifting height: 210 mm, free lift: 210 mm, fuel type: electric, fork length: 1,150 mm, fork width: 550 mm, total height: 1,300 mm, color: other, GVW: 835 kg Lifting capacity: 2.000 kg FUNCTIONS LIKE NEW! Battery 24V 5PzB 500Ah 2025 with filling system, 220V high-frequency charger, Fork size 1150 x 550 mm and distance between forks 190 mm, Tandem fork wheels, Foldable step platform, Power steering, Hedpfx Abezxqcdstst

Condition: used, functionality: fully functional, SCH-BT/300S Bottle Washing, Filling and Capping Machine The SCH-BT/300S is a fully automated machine designed for washing, disinfecting, rinsing, filling, and capping 18.9-liter (5-gallon) water bottles. The system integrates a multi-stage cleaning process with automated bottle handling, filling, and cap application, ensuring high hygiene standards and reliable operation for bottled water production. Technical Specifications * Capacity: 200–300 bottles/hour (depending on washing cycle settings) Hsdpfxezb Rmvo Abtet * Washing Time: Adjustable from 40 to 120 seconds * Bottle Size: Standard 18.9 L (5-gallon) bottles * Power Supply: 400 V, 50 Hz * Installed Power: 9 kW * Compressed Air Requirement: 800 L/h, 6 bar, oil-free * Water Supply Requirement: 5,000 L/h, 1" connection, 2–4 bar pressure * Weight: Approx. 800–1000 kg * Minimum Installation Area: 7 m × 3 m The machine is suitable for small and medium-sized bottled water production facilities requiring efficient and hygienic bottle processing.