Used Carrot Line Grader System for sale (42,635)

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 Guedev I S D Sjpfx Albec The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends - Connectors - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process. Guedpfx Ajy I Tq Sjlboc

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Godpfxszcf Dlj Albjuc Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: good (used), Year of construction: 1980, You are bidding on a branded machine from the well-known German manufacturer Griebel. Features of the machine: Electric feed, cutting, and straightening machine Cuts up to 2mm steel – significantly more for aluminum (see nameplate) Usable length: slightly over 1.5m Sheet metal thickness (iron): 2mm Straightens the sheet metal using an adjustable multi-roller system Length and quantity are pre-set Weight: approximately 2 tons Godjzcxa Hspfx Albsuc We also have other machines and tools available. You will receive an invoice in accordance with §25a UStG (German VAT law). The invoice amount includes VAT. I can arrange transportation services if desired; a forklift is available. Free loading as shown in the pictures. Inspection and testing are possible after arranging an appointment by phone. Payment in cash upon collection. If I can assist you with anything else, please call me. Thank you. Collection should take place within 8 days after the end of the auction.

Condition: used, Complete system Dematic 84180 mm order picking system with empty crates accumulating roller conveyor with flow racks. RA1968 Complete line consisting of: Order picking with racks and flow-through infeed Passage Outgoing goods packing Shipping Order picking: Length: 84180 mm Frame width: 500mm Gsdpfxsk Abnvo Albsuc Roll width: 440mm Undriven roller conveyor on both sides Two accumulation roller conveyors for empty and full boxes Roller conveyors are equipped with plates for pushing over the crates Pallet racks with flow inserts and pallet flow Flow racks with adjustable widths Passage: Consisting of vertical conveyors, incline and decline belts Shipping: Loops for packing and empty boxes 33 m loop for full crates 20 m loop for empty crates Overfeed and passage to connect loops with each other further transport with ascending belt to the stretcher several stretchers at outgoing goods For a customization, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 1999, condition: used, functionality: fully functional, Manufacturer VITAP Model SIGMA 2TA Machine type Multi support drilling system for line and dowel drillings Year of manufacture 1999 Feed-through line – yes Drilling supports from below – 4 Horizontal drilling supports – 2 Drilling block positionin gmanually Working width max2.500 mm Working depth700 mm Passage height max 40 mm Grid 32 mm – yes Drilling blocks per support – 2 Number of clamping bridges 2 Pneumatic top pressure Drilling support positioning – manually Drilling bars 90° pivotable Drilling spindles per support – 2 CE marking – yes Gjdpfx Aljiffpxjbeuc Weight 1.600 kg

Condition: excellent (used), Raw material water receiving tank Destoner Bin tipper with conveyor Bin washing system Safety railings Belt conveyor with carriers, 27 units Flat conveyor, 38 units Drum washer Platform Inspection table Vibrating sorter, 2 units Roller inspection table Hydrocooler Control panel Gsdpsx Uqq Aofx Albsuc Roller size grader Buffer tanks, 9 units Sormac carrot cutter, 3 units Bin stacker Screw conveyor Platform with stairs Option to sell selected machines. Machines are made of acid-resistant stainless steel. Prices are set per individual machine. Please check my other listings.

Condition: used, 70 linear meter painting chain, with clutch system for a load of many products in confined space (see video) Gsdpfx Ajivur Aelbsuc 70-meter painting line with friction system for loading multiple products in a small space (see video)

Condition: new, Year of construction: 2025, MANUAL POWDER COATING PLANTS AND SYSTEMS Our design department will give you the best customized powder coating line solution which meets your product capacity demands. Made in Türkiye CE Mark Godpevv Nuqefx Albsuc We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: used, Year of construction: 2023, functionality: fully functional, Complete extraction system for the production line for log cutting LSH 350/4500. Commissioned in 01/2023. The equipment has no manufacturer, it consists of individual components. Configured based on calculations, documentation available. Gjdoxa Excepfx Albsuc

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, A complete carton packaging and palletising line with comprehensive accessories is being auctioned here! This is a demo machine that was only in operation for a few days! COMPONENTS OF THE PACKAGING LINE Packaging robot KUKA KR 50 R2500 Iontec Gripper Base Labelling robot KUKA KR 10 R110-2 Agilus Gripper 2 Labelling systems Peripheral components Pallet station Room triangle Lantech carton erector Conveyor technology by Interroll Safety equipment Protective enclosure Safety door Safety tunnel Light curtain Centralised control system COMPONENTS OF THE PALLETISING LINE Guodpfxoxhf Awj Albec Palletising robot KUKA KR 120 R3200 PA Gripper Base Palletising software Flex Package Labelling robot KUKA KR 10 R1100-2 AGILUS Gripper Printwolf table printer Peripheral components Lantech carton sealer Lantech turntable stretch wrapper Conveyor technology Pallet dispenser BILA Pallet conveyor system by Interroll Carton conveyor system by Interroll Carton conveyor system NiO Interroll Safety equipment Protective enclosure Safety doors Programmable safety PLC Airlock at the pallet exit Protection tunnel Centralised control system Further details on the individual components can be found in the attached inventory list. The machine can be provided ready for free loading. Dismantling and loading costs amount to €48,000.

Condition: used, Year of construction: 2021, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, For sale is a complete, industrially-used filling, capping, labeling, and banding line for the automated processing of cylindrical cans, including compressed air supply. The line components are technically synchronized, were in use in real production, and are suitable for immediate production startup. Application Range: - Cylindrical PET cans, reference format 75 ml – 400 ml. - Suitable for tobacco, shisha tobacco, food products, cosmetics, and other non-food products. Gjdpfx Ajx Hzzpslbsuc - Multi-format capable (format-dependent adjustments possible) Line Configuration / Main Components: Feeding: - 2× format-adjustable rotary tables - Rotary table 1 for feeding empty cans - Rotary table 2 for feeding lids Dosing & Filling: - REX vacuum filler RVF 327, year 2017 - Precise product dosing - Fillpack filling and capping machine R01-TI, year 2022 - Filling cans - Placement of sealing foil - Sealing foil welded on for tamper-evidence - Placing and screwing on lids Labeling: - CDA NINON labeling machine, year 2021 - Lid labeling - Wrap-around/side labeling - Transfer via conveyor belt Checkweigher: - Garvens S2 conveyor checkweigher, year 2002 - Inline weight control - Automatic rejection of out-of-spec products Banding / Tax Stamp: - ECOMA can banderoler, year 2022 - Application of tax or security bands - CE compliant - Output up to approx. 35 cans/min (format-dependent) Compressed Air Supply (included): - COMPRAG screw compressor ARD-1510, year 2022 - 15 kW, max. 10 bar, 1.9 m³/min - COMPRAG air receiver RH-500, 500 L - Including refrigerant dryer - System acquired new in 2022, optimally matched to the line Auxiliary Unit: - Tumbler / mixer - Vacuum function defective - Mechanical mixing function operative - Offered as an auxiliary unit without warranty Technical Summary: - Degree of automation: high / fully-automatic - Tamper-evident seal: welded sealing foil - Quality assurance: inline checkweigher - CE marking: available - Manufacturing years overall: 2002–2022 Condition: - Used, functional, from ongoing production Scope of Delivery: - Complete production line as described - Conveyor systems between modules - Format parts for 75 ml cans - Controls and switch cabinets - Compressed air system Inspection: Inspection by appointment expressly possible.

Condition: used, Year of construction: 2016, functionality: fully functional, Shipping Line/Roller Conveyor System/Conveyor System, Conveyor Technology approx. 50 meters Manufacturer: RBS-Förderanlagen GmbH Model: Shipping Line Condition: Used Year of Manufacture: 2016 The system consists of: 1 x Inclined Belt Conveyor approx. 3.2 meters in length 2 x Pneumatic Lifts 3 x 90° Curves 2 x Flap/Passage Elements 1 x Control Cabinet 25 height-adjustable feet and the remaining conveyor line/roller conveyor approx. 40 meters Total length: approx. 50,000 mm Total width: 750 mm Conveying width: approx. 680 mm Roller diameter: 50 mm Internal article number: 2025120101 Gsdpfx Aljx Ala Eobouc Features: Condition: fully functional, with signs of use Ideal for fast material handling Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was fully operational up to its dismantling. Thanks to the superior workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Customized solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to provide a tailored offer or consult you on design or installation queries. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our excellent network of experts. We have successfully delivered projects for companies in various industries such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will develop solutions to optimize your processes and material flow efficiently and sustainably. We can also offer fully automated sorting technology and complementary components like picking shelves or containers.

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Gjdpfx Asv U Ea Hslbsuc Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal.

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides Gujdsvpafyjpfx Alboc SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: ready for operation (used), easyLINE 2-axis-system X-axis: 140 mm Y-axis: 120 mm , with connection cables, used, small traces of use, 100% functional Guodpfsi D Uqljx Alboc

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Packing line used for packing muffins, brownies and cakes, comprising of: 1 x Fuji FW3410 high-speed rotary jaw flow wrapper (Serial no. – 049329, Date of manufacture – 2007) with Videojet DataFlex 6420 thermal transfer printer. Fitted with adjustable folding box. Sealing jaws - 300mm wide. Pitch - 220mm. Largest product - 200mm wide x 60mm high. Cut off length - 100mm to 350mm. 1 x Loma Systems CW3 checkweigher with air- blast reject (Serial no. ACW54375-49726D, Date of manufacture – 2019). Weigh platform - 250mm long x 200mm wide. Belt dimensions - 1900mm long x 200mm wide. Gsdpfszcfxvex Albsuc 1 x Lazy Susan with poly-top. Diameter - 1.2m. Fixed speed. 1 x Endoline top and bottom case sealer. All equipment to be removed from the factory by the Buyer.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Complete packing line used for packing muffins, brownies and cakes, comprising of: 1 x Fuji FW3410CX high-speed box-motion flow wrapper (Serial no. – 032901. Date of manufacture – 2019) with Zodiac HS thermal transfer printer. Fitted with adjustable folding box. Sealing jaws - 300mm wide. Belt width - 240mm wide. Pitch - 230mm. Largest product - 200mm wide x 100mm high. Cut off length - 100mm to 450mm. Overall dimensions - 4.5m long x 1.6m wide x 1.8m high. 1 x Loma Systems CW3 checkweigher with infeed spacer conveyors (Serial no. ACW54376-49727D, Date of manufacture – 2019). Belt width - 280mm wide. Weigh platform - 500mm lonc x 260mm wide. Overall length - 3m long. 1 x Lazy Susan with poly-top. Diameter - 1.2m. Fixed speed. Gujdpfx Aljzcfn Dsboc 1 x Endoline top and bottom case sealer. 1 x Loma Systems IQ3+ bulk metal detector with alarm and stop-on-detect reject system (Serial no. – QPB56-30-37541D, Date of manufacture – 2017). Aperture dimensions - 550mm wide x 300mm high (245mm height clearance). Belt dimensions - 1800mm long x 495mm wide. 1 x Codeology Ltd C515 conveyor-mounted print-and-apply label applicator with thermal transfer printer (Serial no. – CT20-000106, Date of manufacture – 2020). 1 x Extendable gravity roller conveyor. All equipment to be removed from the factory by the Buyer.

Condition: used, axle configuration: 1 axle, first registration: 11/2011, suspension: air, tire condition: 40 %, color: other, Year of construction: 2011, Equipment: ABS, tail-lift, = Additional options and accessories = - Air Suspension - Disc brakes - Steering Axle = More information = Guedpfx Ajy Uiz Tolbjc Make axles: SAF Tyre profile: 40% Brakes: disc brakes Suspension: air suspension Rear axle: Double wheels Tail lift: MBB, tail lift, 2500 kg

Condition: used, machine/vehicle number: WSJPRS3277TB12670, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2007, total length: 13,670 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,000 mm, color: other, Year of construction: 2007, = Additional options and accessories = Godpfx Aeyg D Hgolbjuc - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 30% Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 7.920 kg Carrying capacity: 34.080 kg GVW: 42.000 kg Identification Registration number: OK-21-BL

Condition: good (used), Year of construction: 2011, Turbo Rotary Rotary filling line Gsdpfx Aljr Uftrjbsuc Serial: R0061192 2011, Stainless, rotary filling line, consists of Turbo D253P depositor, denester, lid applicator and lid sealer and outfeed conveyor, previously used for filling four pots of sauce in a multipack, tooling dimensions 100mm x 100mm, touch screen controls, 3Ph

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, We are offering this ready-to-use Asymtek SL-940E Inline System, year of manufacture 2012. Manufacturer: Asymtek Model: SL-940E Inline System Year of manufacture: 2012 Condition: operational, last maintenance 02/2026 (machine currently IN OPERATION!!) AVAILABLE BY ARRANGEMENT Category ID: 95 Gjdpfx Aoy N A N Holbeuc MACHINE LOCATED 30 KM SOUTH OF VIENNA If you have any questions or need further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Guodpfx Aexv Av Rslbsc Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: good (used), Year of construction: 2014, For Sale: 1x Diosna Linear System from year of manufacture 2014 including all accessories and control cabinet dimensions: Length x width x height 11.70 meters x 2.20 meters x 2.46 meters. Can be used for almost any type of bowl Originally used for an SP280, but can also be used with a minor adjustment for the W240 This linear system can also be sold in combination with a complete dough preparation system and multiple bowls. If you are interested, please let us know. If you have any questions or comments, feel free to contact us. Transport by arrangement. Gsdpfxowlm T Ij Albjuc Best regards, Leo Holland

Condition: used, functionality: unexamined, overall weight: 75 kg, Equipment: documentation/manual, Magnetic linear guides / positioning systems with Heidenhain Lida 101C scales Guedpfew Evqcex Albsc “Magnetic Linear Motor Motion Systems” | "Linear Motor Motion System" Stroke guide: 1240 mm Weight: 75 kg.