Used Chip Drying Barrel for sale (7,445)

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Length - 14 m Width - 3.6 m Cedpfxjrl Ra Hj Ai Ssrh Drying capacity - 10t/h

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner Crsdpfx Aisxcybks Ssh - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Cedpfjz I Dzisx Ai Ssrh Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: excellent (used), For sale is a professional Dr. TRESKY AG T-3000-FC3 station, manufactured by a renowned Swiss company. This is a high-quality laboratory device designed for the precise assembly and positioning of semiconductor structures (Die Bonding / Flip-Chip Assembly). It is used in research laboratories, as well as in the production of electronics, photonics, optoelectronics, and microelectronics. The T-3000-FC3 model is one of the most versatile platforms from Tresky and enables the execution of both basic and advanced assembly processes. Technical specifications: Crsdpfszi Upcex Ai Soh Manufacturer: Dr. TRESKY AG Model: T-3000-FC3 Country of manufacture: Switzerland Type: manual Die Bonder / Component Placer FC3 Bond Force Control controller Olympus SZ51 stereoscopic microscope Precision XY table Bond force control Vacuum and pneumatic system LED work lighting Documentation included Numerous working tips, holders, and accessories as shown in the photos Applications The device is used for: assembly of semiconductor devices (Die Bonding), Flip-Chip technology, assembly of MEMS components, production of photonics and optoelectronics, assembly of VCSEL lasers, assembly of sensors and hybrid circuits, research and development work and prototyping. Condition The device is sold with extensive equipment as shown in the photos: Olympus microscope, FC3 controller, documentation, drawers with accessories, set of tools and working tips, pneumatic components and accessories. The visual condition is very good. It is sold exactly in the configuration shown in the photos.

Condition: used, Year of construction: 2017, functionality: fully functional, KNOLL FKB 33000 Systems for Chip Processing Processing chips offers numerous advantages: if they are dry and sorted by type, disposal costs are reduced. Depending on the material, the chips can even be sold. A chip processing system includes various components, depending on the requirements: conveying and collecting equipment, magnetic separation technology, filters, and volume-reducing briquetting presses. Containers or chip silos are also required. The components can be linked together and operated fully automatically. Application areas The chip processing system is suitable for both semi-automatic and fully automatic processing of metal chips. Automatic conveying systems or operating personnel with trolleys/containers handle the chip transport from the machining centers. The system is used in almost all manufacturing areas of the machining industry. The processing of different materials (e.g., aluminum, steel, or cast iron) can also be realized using separate systems. Features • Chip drying is a prerequisite for safe transport on public roads. • Volume reduction lowers storage and transport costs. • Recovery of chips and coolant saves the environment and reduces costs. Possible main components • Lifting/tipping device • Chip shredder • Chip centrifuge • Chip conveyor • Separation channels • Magnetic separation technology • Briquetting press • Coolant filter and collection container • Control technology and wiring • Container filling • Chip silo Credpfjz D Uvpjx Ai Soh

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Crodpfx Aieyffqqs Soh Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg Codpfx Aisx Agpze Sjrh SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only with hydraulic feed system maximum thermal output up to 850 kW Cjdpfx Aioy Dfd Ne Serh suitable for dry material

Condition: like new (used), functionality: fully functional, Are you looking for a good unused like new Chip/swarf conveyor? We have 3 units units of different sizes available for sale. Please contact us for more information and sizes required. Each unit is a bargain at only €1,200 each Codpfey Ifm Eox Ai Ssrh

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). Codpfx Aioq Nfuzs Sorh 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Crjdpfx Aieya Hvqe Soh Many System Options Can be Upgraded after Purchase

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: 25787, rotational speed (max.): 1,500 rpm, inlet: 400 mm, input voltage: 380 V, extraction nozzle diameter: 400 mm, input frequency: 50 Hz, input current: 12 A, Description For sale is a robust industrial extraction fan / chip extraction fan from a stationary extraction system of a wood processing production facility. The fan was in regular use until recently. Before the sale, a test run was carried out: the fan starts reliably and runs smoothly for its age. The start-up was documented on video; the video can be sent to serious potential buyers upon request. The scope of delivery also includes the existing control cabinet of the extraction system, including the fan control. The control cabinet is complete. Based on the labeling, it can be seen that the control originally controlled other functions of the filter system in addition to the fan (including vibrator and discharge). Csdpfxoz Ikxzs Ai Serh Technical data fan / motor Motor manufacturer: Rüetschi & Co. AG, electric motors, CH-5040 Schöftland Motor type: KMER 160 M-4 Motor No.: 25787 Power: 11.0 kW / 15 hp Motor voltage according to nameplate: 380 / 660 V Current according to motor nameplate: 23.0 / 13.0 A Frequency: 50 Hz Speed: 1,500 rpm Protection class: IP44 Insulation class: B Design: stationary industrial radial / extraction fan Control cabinet / control System designation: Extraction system Year of construction control: 06/1995 Rated voltage: 3 x 400 V / 50 Hz Power: 11 kW Rated current: 23 A Fuse rating: 35 A Control voltage: 230 V Circuit diagram no.: 95-189-1 Existing control cabinet including fan control included in the scope of delivery Condition Used, functional condition with signs of wear and tear due to age and use. The current test run was successful. Inspection and functional demonstration possible by arrangement. Video of the test run available upon request. Location / Dismantling Location: 3608 Thun, Switzerland. The fan and the control cabinet are still installed. Dismantling, removal, loading and transport are the responsibility of the buyer and will be carried out at his expense and risk. Terms of sale Sale from the location. Sale in the existing used condition, as inspected. No guarantee or warranty, insofar as legally permissible. Technical specifications provided to the best of our knowledge; errors and prior sale reserved. Inspection on site is possible and recommended by arrangement. Selling price: 2,100.00 EUR Price net, any applicable statutory taxes and duties. Export, customs clearance and import duties are the responsibility of the buyer.

Year of construction: 2017, operating hours: 1 h, condition: used, functionality: fully functional, INTEGRATED DRYERS AND PELLETING SYSTEM WOOD SHAVINGS DRYING OLIVE POMACE DRYING FULL AUTOMATION WITH VARIABLE SPEED MOTORS Cjdpjw Hgbhjfx Ai Sjrh STAINLESS STEEL FEEDING AUGERS CONVEYOR TRANSPORT SYSTEMS FUEL AND PRODUCT FEED BUNKERS 9 METER STAINLESS ROTARY DRUM 15 METER IRON ROTARY DRUM 8 MILLION KCAL SOLID FUEL BOILER WITH FULL CAPACITY, IT HAS THE LARGEST WOOD SHAVING DRYING CAPACITY IN TURKEY AT 15–20 TONS/HOUR. IN ACCORDANCE WITH EUROPEAN STANDARDS FOR DETAILED INFORMATION, PLEASE CONTACT US

Condition: good (used), Year of construction: 1999, Esta Spänesog-SB 8151 chip extractor High-performance industrial extraction system from the quality manufacturer ESTA, model Spänesog-SB 8151. This system is ideally suited for workshops to extract chips and dust (e.g. during metal or wood processing). Crjdpfx Aeznibwsi Seh Technical data of the device Manufacturer: ESTA Apparatebau GmbH & Co. KG Model / Type: Spänesog-SB 8151 Voltage (Volts): 400 V Power (kW): 2.2 kW Current (Amps): 4.6 A Frequency (Hz): 50 Hz Protection class: IP 54 (dust and splash-proof) You can find more new and used items in our shop! International shipping costs upon request!

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Crsdpezxzrpofx Ai Ssh Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Condition: used, functionality: fully functional, Year of construction: 2010, 13,200 CPH with 4-nozzle laser head. Up to 200 feeders also available per request. Codpfx Aijz Hwl Es Serh

Condition: used, Year of construction: 2018, machine/vehicle number: 505, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 11,700 mm, inner dimension width: 1,300 mm, inner dimension height: 2,350 mm, total length: 13,130 mm, total width: 2,840 mm, total height: 2,900 mm, overall weight: 6,600 kg, Equipment: CE marking, documentation/manual, We are selling our drying container, manufactured by Eberl Drying Systems. The system features an infeed device with radio remote control. The stacking dimensions are: height 2200 mm, width 1250 mm, length 11600 mm. The system has radio-controlled measuring points and is controlled via the Eberl drying program. Credpfxsz Dtuko Ai Seh

Condition: used, Year of construction: 2016, operating hours: 12,000 h, functionality: fully functional, The last service performed by Asco was in December 2016 at 12,032 hours. After the service, the system only operated for an additional 603 hours because investment was made in a brand new production line. The machine has a total of 12,635 operating hours (12,032 hours since the last service + 603 additional hours). Credpsy R I Uqsfx Ai Sjh The machines come from a large industrial factory that changed its production setup and switched to a different equipment brand. This change is the reason these machines were taken out of production and are now available for sale. The machines are used, fully functional, and in good working condition. The main technical specifications, year of manufacture, and operating hours are listed in the advertisement. Worldwide shipping is available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture Crsdjq Igyvspfx Ai Seh - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: used, Year of construction: 2008, functionality: fully functional, Stefiglass Sprint 1600 1600mm vertical glass washing and drying machine. Working direction: right to left Max washable glass height: 1600mm Number of brushes: 4 (not for Low-e glass!) Drying fan Stainless steel cabin Water heating Backlighting Cjdpjwk Up Usfx Ai Sjrh Stop sensor The machine is in used condition as shown in the pictures, it can be viewed at our location!

Condition: new, Year of construction: 2016, functionality: fully functional, BHK-TECH MW50-2V Microwave System System and Functional Description Microwave system consisting of two MW50 V microwave modules, an internal conveyor system, and two external conveyor systems. The actual microwave chamber consists of a 3 mm stainless steel sheet and has control cabinet segments permanently mounted along its length, in which the high-frequency components are installed behind mechanically and electrically secured covers. The conveyor system for transporting the pallet within the system is designed in a microwave-encapsulated form. The microwave system is equipped with a total of 32 magnetrons, which directly emit energy into the chamber's interior. This technology guarantees uniform energy distribution within the chamber. The magnetrons can only be activated when the door is closed and securely latched. The sealing system on the door opening prevents microwave leakage. Any resulting fumes are extracted via 2 exhaust fans with a total conveying capacity of 17,000 m³/h (free-blowing). The necessary cooling of the high-frequency components is provided by the airflow from the exhaust fans, supported by 4 supply air fans (conveying capacity, free-blowing, approx. 3,500 m³/h). Crjdpfswhvcwsx Ai Sjh In front of the system, there is one conveyor system each with its own drive. The pallet is manually loaded and unloaded by the customer. Sensors are used to check whether the pallet is positioned correctly on the conveyor system. The program is started via a switch on the control panel. The loaded pallet is transported into the microwave system and positioned using a light barrier. The doors of the microwave system are closed, and the microwave irradiation is activated. After the microwave irradiation time has elapsed, the door is opened, and the pallet is transported to the unloading conveyor system. The activation time of the magnetrons can be pre-selected in four power levels on the main control panel. Manufacturer: BHK-TEC Microwave oven type: MW50-2V Number of magnetrons: 32 Voltage: 400 V 50/60 Hz Connection: 70 kW Fuse: 250 A Frequency: 2450 MHz Compressed air: 6-10 bar Year of manufacture: 2016 Emissions Sound pressure: 80 dB Frequency: 50/60 Hz Exhaust air: 2 x 8500 m³/h Supply air: 4 x 3500 m³/h Supply air connection: 2 x 346 mm ø Exhaust air connection: 1 x 465 mm ø Dimensions and Weight Microwave oven: (L x W x H) 3735 x 2373 x 4756 mm Min. room height: 5000 mm Usable interior space: (L x W x H) 3100 x 1200 x 1200 mm Max. permissible conveyor system load: 3000 kg Max. permissible total weight: 9000 kg Empty weight: 6000 kg Control cabinet: (L x W x H) 3800 x 520 x 2250 mm Weight: 700 kg The machine is in absolute new condition. The machine has never been used. New price: €300,000. More ovens in other sizes - new and used - can be found in our shop! International shipping costs upon request!

Condition: good (used), Reinhardt LTV 100 Oven, 200°C Codpfx Aisxbf T Ne Sjrh Manufacturer: Reinhardt Type: LTV 100 Usable volume: 0.65 m³ Steam volume: 1.04 m³ Output: 10.56 kW Fresh air exchange rate: 1 l/min Loading system with 7 supports, size W x D: 770 x 850 mm Voltage: 380 V Operating temperature: 50°C - 200°C Nominal temperature: 130°C Dimensions H x W x D: 2050 x 1650 x 1180 mm Chamber: H x W x D: 1000 x 800 x 950 mm You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2017, Country of manufacture - Italy Cjdsv Nkaujpfx Ai Ssrh INSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 13.200 X 8.900 X 5.400 MM OUTSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 14.060 X 9.500 X 6.900 MM FAN MOTORS: 5,5 KW AT VARIABLE SPEED FAN MAXIMUM ELECTRIC POWER REQUIRED: 55 KW

Year of construction: 2022, operating hours: 6 h, condition: like new (used), functionality: fully functional, 3 pieces of nearly new PROLAIN dryers, each approx. 170 m³. Further technical data available on request. Sale on behalf of customer. Crjdpfexcifrex Ai Seh

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Crsdszxgglspfx Ai Ssh Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice