Used Chroma Batteriepack-Tester Test Table for sale (25,301)

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Psdpfx Akjwwrxaefogk Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: used, table clamping surface: 228 x 273 mm 3 T-slots: 12 mm in between 4 x 4 threaded holes: M 8 table height at zero position: 146 mm Space requirement: 250 x 290 mm Pgedjbbgcxspfx Akfjk Weight: 41 kg

Condition: ready for operation (used), Emco Test M4C 025 Universal Hardness Tester Hardness Testing Machine Test force range: 9.8-2450N Test height: 260 mm Throat depth: 200 mm Max. workpiece weight: 50 kg Dimensions: 250 mm x 1055 mm x 750 mm (W x H x D) Pgsdpjyybt Esfx Akfok You are welcome to arrange an inspection appointment. We can also organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be provided, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop to see our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data or errors in the description of the item may occur and are subject to change.

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit Pgjdpfx Aef Axn Askfsk ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Pgsdpfx Ajd Dc Unjkfsk EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Pedjytn Hkjpfx Akfegk Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Pedjx Up Igspfx Akfjgk Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Psdpfx Akoxqxt Iefsgk Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Safety tester with scanner for high-voltage test station - EATON Sefelec 506-S - EATON Sefelec 64-SC The devices were purchased in 2023/2024 and are in top condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is controlled via DSP. This technology offers the operator optimal stability and repeatability of measurements. The high accuracy and measurement speed are tailored to the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The 7” touchscreen of the new SEFELEC model series impresses with simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Voltage withstand at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC to 1000 VDC Optional: 2TΩ range PE measurement at 32A - 8VAC, measurement 0 ... 1Ω Optional: test current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps Psdpfx Akoxqxw Tsfjgk TFT touchscreen 7”, 16 million colors, for programming, as well as for displaying ongoing tests and results Integrated ARM dual core control & Nand 3D technology for optimal accuracy, stability and repeatability Integrated DSP enables higher test speeds Large internal memory for storing configurations and test results Completely compliant with IEC 61010-2-034 (safety requirements for test and measurement equipment for insulation resistance measurement and equipment for voltage withstand testing) Shipping is possible subject to prior agreement. #8312-2

Condition: excellent (used), Here we offer you a Zwick / Roell tensile testing machine table-top testing machine.Zwick / Roell material testing machine BDO-FB0.5TH load in tensile / compression direction 500 N height 1565 mm , width 292 mm , depth 469 mmwidth of the test surface: infiniteTest range depth: 100 mmMax working stroke w.o. Accessories 1266 mmPC or printer interface RS 232Required PC connection (for PC operation) COM 1Performance data: 115/230 V (PH, N, PE)Rated power : 0.4 kVAN power frequency: 50/60 HzWeight: 47 kgType: BDO-FB0.5THCondition: used / usedScope supplied: (See picture)(Changes and errors in the technical data, details reserved!)We will be happy to answer any further questions you may have on the phone. Pedpfed Sr S Isx Akfjgk

Condition: ready for operation (used), Reicherter Wolpert Hardness Testing Machine / Hardness Tester Manufacturer: Reicherter Model: Briro VA II Test Loads: 50 – 100 kgf, 62.5 – 187.5 kgf, 100 – 250 kgf Manufacturer: Wolpert Model: Dia Testor 2n Throat Depth: 150 mm Test Area Height: 300 mm Brinell (ISO 6506): 5 / 10 / 15.625 / 30 / 31.25 / 62.5 / 187.5 / 250 Vickers (ISO 6507): 5 / 10 / 20 / 30 / 40 / 50 / 125 Psdpfxox U Tlvj Akfogk Accessories: See photos for details You are welcome to come for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. Requirement: a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Stated company names and trademarks are the property of their respective owners and are used only for identification and description purposes. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: used, functionality: fully functional, total width: 700 mm, total length: 1,400 mm, total height: 500 mm, overall weight: 2,000 kg, space requirement width: 700 mm, space requirement length: 1,400 mm, space requirement height: 850 mm, Attention only measuring plate from CMM utilization with table frame Pgodpfovfn Ihex Akfjk

Condition: used, Year of construction: 2001, functionality: fully functional, total width: 1,400 mm, total length: 3,500 mm, total height: 800 mm, overall weight: 7,500 kg, Measuring plate from CMM utilization with adjustable feet Pgedpou Uiitsfx Akfok

Condition: excellent (used), Electrical installation tester from the renowned German manufacturer Gossen Metrawatt The PROFITEST MXTRA model is designed for professional measurement of electrical installations and safety inspections. The device is used by electricians, service technicians, and for routine installation inspections. ⸻ TECHNICAL SPECIFICATIONS Manufacturer: Gossen Metrawatt Model: PROFITEST MXTRA Supply voltage: 230 V Measurement category: CAT III 600V, CAT IV 300V Professional electrical installation tester ⸻ Pedjywcr Dopfx Akfogk INCLUDED IN THE SET PROFITEST MXTRA tester measurement cable adapter carrying bag The exact set is shown in the photos ⸻ APPLICATIONS electrical installation measurement safety testing installation inspections electrical service ⸻ CONDITION used visually in good condition

Condition: excellent (used), Electrical safety tester from the renowned German manufacturer Gossen Metrawatt The SECUTEST Pro model is designed for testing electrical devices in accordance with the IEC 62353 standard. Pjdpeywcrwjfx Akfsgk The set includes several devices along with measuring leads and carrying bags. TECHNICAL DETAILS Manufacturer: Gossen Metrawatt Model: SECUTEST Pro Standard: IEC 62353 Power supply: 230 V Professional tester for electrical device safety SET INCLUDES Several testers Measuring cables Adapters Carrying bags Exact condition as shown in the photos APPLICATIONS Testing of electrical devices Service and maintenance Safety inspections Medical and industrial use CONDITION Used Visually in good condition Technical condition not fully checked IMPORTANT Sale as a set as shown in the photos No additional accessories except those pictured SHIPPING

Condition: not inspected (used), functionality: unexamined, table diameter: 50 mm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 04.05.26 and 07.05.26. TECHNICAL DETAILS Diameter of support surface: 50 mm Pgsdeyr Rqcspfx Akfek MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 200 x 650 mm Machine weight: 100 kg External reference: Lot 85

Condition: ready for operation (used), Hommel Tester T1000 Surface Roughness Tester Measuring Device Measuring range: ± 80 µm Resolution: 0.01 µm, ± 320 µm Resolution: 0.04 µm You are welcome to come by for an inspection. We can also arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. The prerequisite is a valid VAT identification number. Psdpfx Akoxxad Rjfsgk Subject to prior sale. Visit our shop and also take a look at our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the item description may occur and are subject to change.

Year of construction: 2012, condition: used, functionality: fully functional, We offer a professional and ready-to-use TSK Tokyo Seimitsu SURFCOM 2000 SD2 surface roughness and contour measuring system, including PC system and TIMS software. This measurement system is ideally suited for quality assurance, manufacturing, toolmaking, CNC production, and testing laboratories, enabling precise and repeatable surface roughness and contour measurements. The device comes from industrial use, was recently in operation, and can be inspected and tested by appointment. Scope of delivery: * TSK Tokyo Seimitsu SURFCOM 2000 SD2 * PC system for data evaluation * TIMS software version 12.62 installed * Connection and interface cables * Accessories as shown or as agreed Technical highlights: * Precise roughness and contour measurement * High repeatability * Professional TIMS evaluation software * Robust industrial-grade construction * Ideal for industrial metrology and quality assurance * Suitable for both series and single measurements Condition: * Used * Fully functional * Year of manufacture: 12/2012 * Demonstration/testing possible by appointment International sale possible. VAT-free intra-community delivery is possible for EU businesses with a valid VAT ID. Loading assistance available. Keywords: TSK Tokyo Seimitsu, Surfcom 2000, SD2, roughness measuring instrument, surface measuring device, contour measuring system, profilometer, surface roughness tester, surface profilometer, industrial metrology, quality control, metrology, quality assurance, CNC, toolmaking, test laboratory Professional TSK Tokyo Seimitsu SURFCOM 2000 SD2 surface roughness and contour measuring system for sale. Including: * PC system Pgsdpfx Aksy Hq Iljfsk * TIMS software version 12.62 * Cables and accessories as shown The machine is fully functional and was recently in industrial use. Inspection and test run possible by appointment. Ideal for: * Quality control * Industrial metrology * CNC manufacturing * Toolmaking * Surface roughness measurement * Profilometry International sale possible. VAT-free intra-community delivery available for EU companies with valid VAT ID. Loading assistance available.

Condition: excellent (used), For sale: professional portable surface roughness tester Mitutoyo SJ-210 Podpfx Aksyc Rwdofegk manufacturer code: 178-560-01D drive: 0.75 mN Made in Japan Device for precise measurement of surface roughness according to ISO 1997. Condition: Used, in very good technical and visual condition. Fully functional. Display without any damage. Complete set as shown in the photos. Included: – SJ-210 measurement unit – standard drive attachment – Mitutoyo 178-601 reference specimen – power supply – cables – original carrying case – original packaging The device measures, among others: Ra Rz parameters compliant with ISO standards Ideal for: – quality control – CNC companies – tool shops – technical departments – measurement laboratories Industrial-grade equipment – this is not a budget laboratory version.

Condition: good (used), Manufacturer: WMW WPM Material Testing Machines Leipzig Year of manufacture: Model: Test method: Table diameter: 200 mm Support diameter: 100 mm Throat depth: mm Test height: 300 mm Spindle diameter: 50 mm Test force: 15.5 to 250 kg Accessories: Podjy Hka Uepfx Akfsgk Weight: 130 kg Footprint: 500 x 200 mm Dimensions: 500 x 300 x 730 mm Condition: good

Condition: good (used), Year of construction: 2010, functionality: fully functional, Light fastness tester with water-cooled xenon arc lamp + 600 h of operating time left on the installed xenon arc lamp + 1 new xenon arc lamp included (value: €2,500) Pgsdpfjy Dht Hox Akfek

Condition: good (used), Robust universal hardness tester suitable for Rockwell, Vickers, and Brinell measurements. Sturdy machine stand designed for rugged everyday use. Measuring systems: - Measuring head with ground glass Podpfx Akowg R Thofegk - Rockwell with dial Test height 300 mm Test depth 150 mm Hardness tester dimensions L x W x H 610 x 350 x 940 mm, without base frame Machine weight approx. 260 kg

Year of construction: 2019, condition: ready for operation (used), A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Pgodpoy Ax Thsfx Akfek

Condition: good (used), Year of construction: 1979, functionality: fully functional, overall weight: 220 kg, A Reicherter hardness tester is for sale in good used condition, as shown in the photos. Technical specifications: • Manufacturer: Reicherter • Model: Briviskop BVR 187.5 H • Hardness tester for Brinell, Vickers, and Rockwell • Equipped with a digital display by Stiefelmayer • Many accessories: computer and monitor, numerous hardness test plates and test tables • Last calibration was in August 2025 • Weight: approx. 220 kg • Condition: Used, in working order Shipping costs via freight forwarder: approx. €120 International buyers are welcome! Pgodpfxey Dvbfj Akfok You will receive an invoice with VAT shown. Viewing/pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, buyer loads. Subject to errors in technical data and prior sale.

Condition: used, max. wheel diameter 0-200 mm max. module 25 min. module 0,5 Podpstuxa Uofx Akfsgk