Used Cma Reconditioned 5 Axis Robot Cma for sale (66,165)

Condition: ready for operation (used), functionality: fully functional, Equipment: documentation/manual, SECOND-HAND RECONDITIONED 5 AXIS ROBOT CMA MOD. ROBY 5EX-R - N. 5 controlled axis - N. 3 supports - Wrist capacity 3 kg Carrousel Iodpfx Agot U Ngaeyobc - N. 3 supports - Arm capacity 25 kg. - With manual and CE certificate RETROFIT 2024

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 279/02, SECOND-HAND RECONDITIONED 5 AXIS ROBOT CMA MOD. ROBY 5EX-G Iodpfxjx Rrg Rs Agysbc - N. 5 controlled axis - N. 3 supports - Wrist capacity 3 kg Carrousel - N. 3 supports - Arm capacity 25 kg. - With manual and CE certificate RETROFIT 2025

Condition: used, Year of construction: 2017, machine/vehicle number: 1000020374, functionality: fully functional, operating hours: 5,484 h, power: 12.8 kW (17.40 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: DC, travel distance X-axis: 3,280 mm, travel distance Y-axis: 1,660 mm, travel distance Z-axis: 240 mm, number of axes: 5, number of slots in tool magazine: 16, controller manufacturer: Biesse, actuation type: pneumatic, Equipment: CE marking, documentation/manual, We are selling a 5-axis machining center, Biesse Rover A 1632 Smart, manufactured in 2017. The machining center is in very good condition due to relatively infrequent use since its purchase. We are the first owner. I have attached the file "Cartellino_1000020374" to the listing below. This is a manufacturer's document describing the configuration of the offered machine according to Biesse standards. Ibsdsz R I U Ijpfx Agysc Technical specifications of the machining center: ‣ Working areas *: X = 3280 mm; Y = 1580 to 1660 mm, depending on operating conditions. Z = 200 mm (configuration with 5-axis unit, drilling head, and H=74 mm modules). Z ​​= 240 mm (configuration with 5-axis unit, drilling head, and H=29 mm modules). ‣ Configuration 2 ‣ 6 ATS tables – 18 carriages ‣ Rear row stops with 115 mm travel and 25 mm extension. ‣ Intermediate row stop located at coordinate 1190 mm with 140 mm travel. ‣ 4 side stops with 140 mm travel (2 right + 2 left) with pneumatic system. ‣ Sensor to verify stop retraction. ‣ 4 support bars for H=74 mm modules. ‣ Claw-type vacuum pump with 250 m³/h capacity. ‣ Vacuum module – Size 132x146 – H74 mm with high-friction surface and pre-installed vacuum seal. ‣ Vacuum module – Size 132x75 – H74 mm with high-friction surface, pre-installed vacuum seal, and pre-installation for locating pins. ‣ Vacuum module – Size 132x54 – H74 mm with high-friction surface, installed vacuum seal, and pre-installation for locating pins. ‣ Automatic lubrication system. ‣ Sawdust and chip removal conveyor. ‣ 5-axis interpolating machining unit, 13 kW (17.4 HP), HSK F63 tool holder, liquid-cooled. ‣ Coolant supply unit. ‣ Additional Z-carriage for machining units, controlled by an independent Z-axis. ‣ BH 17 L drilling head. ‣ 16-position rotary tool magazine on the X-carriage. ‣ 12-position linear tool magazine mounted on the machine frame. ‣ HSK F63 adapter with integrated flange for saw blades used in 5-axis units. ‣ 300 mm diameter saw blade for integrated-flange mounting. ‣ bSolid software. If the information above is insufficient, please contact me and let me know what you would like to know. Upon request, I can provide a document in English with a detailed description of our machining center's layout. Best regards, Ihor Balychev.

Condition: used, Year of construction: 2003, operating hours: 34,900 h, functionality: fully functional, machine/vehicle number: 112253, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112253 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm Ibodpfx Aez Akqvegyoc - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg

Condition: used, Year of construction: 2000, Painting plant consisting of: - Painting robot brand CMA, mod. Roby 5 Ex G, used, tested Ibsdpfoy Ud R Asx Agyoc - Circular dry filtering cabin, complete with extractors, water scrubber, external fume extractor for solvent storage, scale and various accessories - electrical panel, use and maintenance manuals, wiring diagrams, etc.

Condition: excellent (used), Year of construction: 2017, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 25787, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 6,900 h, Equipment: chip conveyor, documentation/manual, Hermle C 400 U – 5-Axis Machining Center Year: 2017 Control: Heidenhain TNC 640 Condition: Very good Machine ON: 18,512 h Program: 9,268 h Spindle ON: 6,900 h Drive ON: 18,514 h Axes in motion: 7,147 h Technical specifications: X/Y/Z travel: 850 / 700 / 500 mm A-axis: 25 rpm C-axis: 30 rpm Spindle speed: up to 18,000 rpm Power: 20 kW Torque: 173 Nm Tool holder: HSK 63 Ibsdpfoz H Agbsx Agyjc Tool magazine: 38 + 50 positions NC swivel rotary table: Ø 650 mm Swivel range: +91° to −139° Equipment: Heidenhain touch probe BLUM tool measurement Electronic handwheel Chip conveyor Oil mist extraction Inspection possible by appointment.

Condition: like new (used), Year of construction: 2022, operating hours: 458 h, functionality: fully functional, machine/vehicle number: 1536582684A, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 30 kVA, torque: 83 Nm, workpiece height (max.): 550 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 3,500 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 13 W, number of spindles: 3, number of slots in tool magazine: 30, tool diameter: 80 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this DMG MORI CMX 50 U universal machining center, in like-new condition. Operating hours: Power-on hours: 458 h / Spindle: 330 h, year of manufacture 2022. TECHNICAL DATA Axis travels: • X = 500 mm • Y = 450 mm • Z = 400 mm • B = -5° / +110° • C = n × 360° Work table: • 630 × 500 mm pivoting rotary table • 7 T 14 H7 grooves, 63 mm pitch • Central hole Ø 30 H6 • Permissible table load: 200 kg • Axis – table distance: 150–550 mm Main spindle (inline spindle): • Speed: 20 – 12,000 rpm • Power: 13 kW (40% DC) / 9 kW (100% DC) • Torque: 83 Nm (40% DC) / 57 Nm (100% DC) • Tool shank: SK40 DIN 69871 • Clamping according to DIN 69872, hydraulic control • Clamping force SK40/BT40: 10 kN Tool magazine: • 30 positions, chain with double gripper • Max. tool diameter: 80 mm (130 mm with adjacent pockets free) • Max. tool length: 300 mm (from the spindle face) • Max. tool weight: 8 kg • Max. magazine load: 120 kg • Tool change time: 2.7 s Feeds and accuracy: • Rapid feed rate X/Y/Z: 30 m/min Ijdez Epnvjpfx Agyebc • Max. feed force (40% DC): 4.5 kN • Linear guide rails with rollers on all axes • Direct measuring system on X, Y, Z (including air purge) • Positioning accuracy X/Y/Z: A = 6 µm (ISO 10791-4) • Repeatability X/Y/Z: R = 5 µm (ISO 10791-4) • Accuracy B/C: A = 16 seconds of arc (ISO 10791-4) • Repeatability B/C: R = 12 seconds of arc (ISO 10791-4) INCLUDED EQUIPMENT Base machine: • CMX 50 U universal machining center (C-A3390F) • DMG MORI SLIMline Multi-Touch 19" / Siemens 840D SL control (C-B3097F) • Coolant or air, switchable via M functions • Chip tray / drawer • Enclosure with sliding door • DMG MORI IoTconnector included as standard 20 bar production package with chip conveyor (C-K3661F): • Internal 20 bar coolant supply • Scraper-type chip conveyor, 250 l tank (left) • Washing of bed and ATC arm via M function • Coolant spray gun • External electronic handwheel • Enclosure roof • 4-color signaling lamp • Double cartridge filter (filter change without stopping the machine) Measurement / monitoring: • Renishaw measuring kit for Siemens (C-K4222F): PP40 probe with optical transmission, TS27R tool probe, measuring cycles with tool breakage monitoring, dummy tool and calibration ring • 3D QuickSET for CMX U (C-K2530F) – control and compensation of 5-axis kinematic accuracy Software and documentation: • DXF Import option on Siemens controller (C-G3067F) • Documentation in Romanian • Screen text in Romanian DMG MORI Digital Products: • Digital production package: IoTconnector, machine data connector MDC (OPC UA / MTConnect / MQTT), NETservice (remote diagnostics) • Messenger V4 – machine status in real time • DMG MORI Service Agent – preventive service warning • Machine 3D model in STEP format (upon signing of NDA, for CAD/CAM) NUMERICAL CONTROL – Siemens SINUMERIK 840D SL • TCU30.3 console, NCU720.3B PN • Safety Integrated • 19" multi-touch screen, 1024 × 1280 • Block processing time: 1.5 ms • User memory 16 MB + 4 GB extension (EES) CONNECTIONS • Standard 12,000 rpm: 30 kVA / 47 A / 50 A fuse at 400 V • With 20/40/80 bar package: 32 kVA / 50 A / 63 A fuse at 400 V • Voltage: 400 V / 230 V, 50/60 Hz, ±10% • Air: 6–8 bar, average consumption approx. 30 m³/h

Condition: excellent (used), Year of construction: 2022, operating hours: 10 h, ABB IRB 1200-5 /0.9 + Controller + TPU DEMO ROBOT, as new DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, offering a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Ibjdpfx Aez Taf Ajgyec

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1131578, SPECIFICATION Trunnion table size 630mm x 500mm X axis traverse 762mm Y axis traverse 508mm Z axis traverse 508mm B axis tilt +110 deg -35 deg C axis rotation 360 degree Spindle BT 40 Spindle speeds 0-15,000rpm Spindle motor 22.4kW Rapid feed rate X, Y, Z axis 30.5/min Rapid feed rate B, C axis 150 degrees a second Toolchanger capacity 40 + 1 Tools Approx. weight 8900kg   MACHINE EQUIPPED WITH: - Ibjdpfx Agszr Nf Dsysc Haas CNC Control System Through Spindle Coolant, with Auxiliary Filtration Swarf Conveyor Renishaw Wireless Intuitive Probing System High Speed Machining Lighting Enclosed Guarding

Condition: excellent (used), HERMLE C 42 U is a 2 x 5‑axis machining centres with loading robot, engineered for high precision and reliability. Table 400×400 mm, table load 450 kg, travels X800 Y800 Z550 mm, A ±130°. Spindle HSK‑A63 0–18,000 rpm, 42 kW, 148 Nm; rapid 45/45/40 m/min. Tool magazines 42+160, 54 pallets, KUKA robot, coolant 80 bar, Renishaw/BLUM. Suited for tight tolerances in automotive, aerospace, watchmaking, medical. Iodpfxeyxn Dns Agysbc

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Ibodpfjzi Awhjx Agyec Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2009, Machine will come with robot . 42.000 rpm Ijdpfx Aexfu S Nogysbc

Condition: used, Year of construction: 2003, operating hours: 67,400 h, functionality: fully functional, machine/vehicle number: 112258, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 410 mm, controller model: Brother CNC-A00, total length: 2,250 mm, overall weight: 2,250 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 26, BROTHER TC-22A – 5 AXIS - Manufacturer: Brother - Model: TC-22A - Serial Number: 112258 - Year: 2003 - Machine Type: CNC Vertical Machining / Tapping Center - CNC Control: Brother CNC-A00 - Number of Axes: 5 - X-Axis Travel: 500 mm - Y-Axis Travel: 400 mm - Z-Axis Travel: 410 mm - Table Size: 650 × 400 mm - Maximum Table Load: 200 kg - Distance Table to Spindle Nose: 200–610 mm - Spindle Taper: HSK-A40 - Spindle: 1 - Spindle Speed: up to 12,000 rpm standard - Tool Magazine: 26 tools - Maximum Tool Diameter: 55 mm - Maximum Tool Diameter with Adjacent Pockets Empty: 125 mm - Maximum Tool Length: 200 mm Iodpfx Aszvf Naogyebc - Tool Change Time: approx. 0.7 sec - Rapid Traverse X/Y/Z: 56,000 mm/min - Spindle Motor: approx. 7.7 kW / 10 min rating - Power Supply: AC 200 V, 50/60 Hz - Maximum Power Requirement: 25 kVA - Rotary / Swivel Table: Installed - 5-Axis Configuration: 3 linear axes + 2 rotary/swivel axes - Chip Conveyor: Included - Coolant Treatment System: Included - Coolant / Lubricant Pump: Included - Machine Dimensions / Required Floor Space: approx. 1,671 × 2,846 mm - Machine Height: approx. 2,274 mm - Machine Weight: approx. 2,250 kg - Accessories: Storage rack and tiered cart

Condition: refurbished (used), Year of construction: 1997, 1997 CMA Roby 5 EX Anthropomorphic painting robot (self-learning) complete with electrostatic gun and generator. Sames generator and gun. Ibedpfx Asxwctfsgyoc

Condition: good (used), Year of construction: 2009, KUKA KR 210 L150-2 2000 6-Axis Robot Iodpfx Aozcwxujgyebc The KUKA KR 210 L150-2 2000 (Series 2000) is a powerful 6-axis industrial robot specifically designed for extended reach with a high payload capacity. The abbreviation "L150" indicates the arm extension (long version), which increases the maximum reach to 3,100 mm, while the nominal payload is 150 kg. Key technical data: Maximum reach: 3,100 mm Nominal payload: 150 kg Additional load (arm/link): 50 kg / 100 kg Number of axes: 6 Repeatability: ± 0.06 mm Self-weight (without controller): approx. 1,285 kg Protection class: IP65 (standard) Mounting position: Floor Axis data (range of motion & speed) The Series 2000 is characterized by high-torque drives that ensure high dynamics despite the large arm extension: Axis 1 (A1): ±185° | Max. speed: 86°/s Axis 2 (A2): +90° to -61° | Max. speed: 84°/s Axis 3 (A3): +65° to -209° | Max. speed: 81°/s Axis 4 (A4): ±350° | Max. speed: 100°/s Axis 5 (A5): ±125° | Max. speed: 110°/s Axis 6 (A6): ±350° | Max. speed: 184°/s Typical applications Due to its large working area and payload capacity, the manipulator is ideally suited for: Material handling and palletizing tasks over long distances. Milling applications and mechanical machining (e.g., deburring of components). Spot welding and handling in automotive production. Additive manufacturing and large-part 3D printing "One-stop shop: We would be happy to offer you suitable bank financing for your project." More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), ABB Robot IRB 6600 industrial robot with IRC 5 controller Isdpfx Aoxt Ha Usgyebc

Condition: good (used), KUKA KR 240 R2900 ultra industrial robot The KUKA KR 240 R2900 ultra is a high-performance, 6-axis industrial robot from the well-known KR QUANTEC ultra series. It is characterized by a high payload capacity of 240 kg and a maximum reach of 2896 mm. This model was specifically designed for demanding, heavy-duty automation tasks in industry. Key technical data Nominal payload: 240 kg Maximum total load: 290 kg Maximum reach: 2896 mm Number of axes: 6 Pose repeatability: ± 0.06 mm Self-weight: approx. 1145 kg Mounting position: Floor Protection class: IP65 (central hand IP67) Controller: KUKA KRC4 Range of motion of the axes The axes offer a large range of motion for maximum flexibility in the workspace: Ijdpfxszcqh As Agyobc Axis 1 (A1): ± 185° Axis 2 (A2): -140° / -5° Axis 3 (A3): -120° / 155° Axis 4 (A4): ± 350° Axis 5 (A5): ± 122.5° Axis 6 (A6): ± 350° Thanks to its robustness and dynamics, this type of robot is frequently used in the automotive industry and in mechanical engineering. Typical applications - Material handling & logistics: Palletizing and moving heavy components. - Metal processing: Gas metal arc welding, spot welding and laser cutting. - Machining: Milling, deburring and grinding of large workpieces. - Assembly: Handling and joining of heavy components. “Everything from a single source: We will gladly offer you suitable bank financing for your project.” More articles – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2016, Used 2016 SPINNER U-1520 Machining Centre Supplied with Siemens SINUMERIK 840 control, 12,000 RPM spindle, 32-station tool changer, 80 bar high-pressure coolant, air through spindle, Renishaw probe, touch probe, and additional Ø650 mm rotary table. ----- SPECIFICATION: TRAVELS: Isdezx Ehnopfx Agyobc - X Axis: 1,500 mm - Y Axis: 500 mm - Z Axis: 600 mm - 4 Continuous Axes + 1 Positioned Axis TABLE: - Rotary Table Diameter: 650 mm - Fixed table: 920x540mm SPINDLE: - Max Speed: 12,000 rpm - Taper: SK40 - Air Through Spindle TOOL CHANGER: - Capacity: 32 Tools COOLANT EQUIPMENT: - High Pressure Coolant: 80 bar GENERAL: - Control: Siemens SINUMERIK - Renishaw Probe - Touch Probe - Year of Construction: 2016 Control: Siemens 840D Spec: Travel X 1500 Y500 Z600 | Spindle Speed 12000RPM | SK40 Accessories: 5 axis Table, Fixed Table, 32 Tool Changer

Condition: used, Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) allows for use in cleanrooms or under harsh environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard version for cleanroom class ISO 5. Easy to clean. Excellent dynamic path behavior High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical Data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Isdpfx Ajzh U Sbogysbc Open architecture Compact Good accessibility Reliable Technical Data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Stäubli Type: Robot TX90L / Controller CS8C Six-axis robot with controller The high-performance robots of the TX90 series, designed for medium payloads, offer maximum flexibility for a wide range of applications due to their compact and streamlined design. Thanks to the three mounting options – floor, wall, and ceiling – the six-axis robots are easy to integrate. The fully encapsulated design (IP 65) allows for use in cleanrooms or under harsh environmental conditions. Features Fully encapsulated design with internal supply lines Rigid structure Multiple mounting options Patented Stäubli JCM gearbox modules Large reach Advantages Perfect protection of the components. Standard version for cleanroom class ISO 5. Easy to clean. Excellent dynamic path behavior Iedpfxjzh U Tfe Agyjbc High flexibility Precision, dynamics, and speed with reduced maintenance Optimal use of the workspace Technical Data TYPE TX90L Number of degrees of freedom 6 Nominal payload 6 kg Maximum payload 15 kg Reach 1200 mm Repeatability ±0.035 mm Protection class (wrist) IP65 (IP67) Mounting options Floor / Wall / Ceiling Controller Stäubli CS8 CS8C Features Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front Proven digital technology Advantages Open architecture Compact Good accessibility Reliable Technical Data: Type CS8C Dimensions (H x W x D) 331 x 445 x 455 mm 481 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Storage capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Type: Robot TX90L / Controller CS8C Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Stäubli Type: TX90L robot / CS8C controller Six-axis robot with controller For sale: a Stäubli TX90L 6-axis industrial robot including CS8C controller and original teach pendant. The robot is suitable for pick & place, assembly, handling, machine loading, as well as automation, testing and training applications. Programming via VAL3. Iedpfx Ajzix Ucjgyobc Technical data – Robot Type: TX90L Axes: 6 Payload: 5–6 kg nominal, up to 15 kg temporarily Reach: approx. 1,200 mm Repeatability: ±0.035 mm Wrist protection rating: IP65 (IP67) Mounting: Floor / Wall / Ceiling Robot weight: approx. 113 kg Technical data – Controller Controller: Stäubli CS8C Software: VAL3 s6.7.1 Programming language: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Power supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection rating: IP20 Controller weight: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by phone.

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Hand Wheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79020 Serial No: VKC064 Price: £24,950.00 + VAT Ibjdpfx Agsygct Esyec Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2010, Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China. Ibedpfxjx Aunxo Agyec

Condition: good (used), GR6100 robot with hollow wrist Ibedpjyxmt Usfx Agyjc Hollow wrist and axis 3 for routing paint hoses Flange for 3 spray guns Light barrier/reading barrier Connection for automatic color change

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 2190, functionality: fully functional, operating hours: 3,500 h, 5 axis cnc used for many applications with new touch screen set up and adopted to new air cooled spindle, tool changer and renishaw possible Ibedpezhaqcsfx Agyoc