Used Cmb Automatic Cold Press Cmb Pfr-Ccl (2017) for sale (34,420)

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Kdjdpfx Akszuzw Dslsr Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition Kdsdpfx Akszrpl Dolor

Condition: good (used), Pressing force: 25 t Cutting capacity: thickness / width: 1.25 / 140 mm Number of strokes per minute: min./max.: 250 strokes/min. Ksdpfxefim Dwe Aklsdr Ram stroke - max.: 20 mm Usable table area: WxL: 440 x 360 mm

Condition: good (used), Table size: 350 x 350 mm. Kdsdpfx Ajfm A Amoklor

Condition: used, Pressure: 30t Strokes per minute: 120-600 Stroke: 40mm Up table size: 250x500mm Down table size: 600x600mm & 400x320mm Between Columns Technical characteristics: *AUTOFEED LENGTH 80mm, WIDTH 320mm *AIRCLUTCH Power: 7,5kw DIMENSIONS: Height: 2600mm Kedpfx Ako Dvk Asljdr Width: 1800mm Length: 1200mm Weight: 3800kgr New electric systems

Year of construction: 2000, condition: ready for operation (used), Voltage: 380V, frequency: 50Hz, 3 phases, equipment: rotary indexing table, filling station with powder hopper, pressing station with hydraulic pressing unit, conveyor belt, control panel with Run/Ram/Index functions, main switch, HMI/display PP-006, Mitsubishi PLC FX2N-32MR, expansion module FX2N-4DA, Mitsubishi operator panel F940GOT-SWD-E, hydraulic power unit with electric motor, pneumatic and hydraulic lines, safety enclosure, emergency stop, 400V/CEE connection and CE marking. An on-site inspection is possible. Kjdpfxezadmgo Aklsdr

Condition: used, Year of construction: 2017, Schuler BEUTLER Press Type: MC 4000 Year of manufacture: 2017 Press force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Die height: 750 mm Kjdpszui Haefx Akledr Table area: 3,000 x 1,400 mm Press weight: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, Year of manufacture: 2017 GSW Schwabe, Type: RMA 50/78, Year of manufacture: 2017

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, pressing force: 16 t, total width: 700 mm, center height: 1,050 mm, working height: 1,050 mm, Automatic straightening system, mechanically overhauled, fitted with new SIMATIC S7-1500 control and Drive Controller CPU 1504D TF. Max. centre distance 500 mm, straightening force 16 t, straightening stroke 20 mm, idle stroke 95 mm, working height 1050 mm, power rating 10 kVA, average consumption 1.3 kW. Option: The machine can be equipped with a lifting beam conveyor (through the machine), as well as infeed/outfeed belts according to customer requirements, and also with a safety fence. Currently, the machine is equipped with 1 straightening station; expansion is possible. Kodpfexldiqex Aklodr

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, Kjdjtty Nkepfx Aklodr the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: used, Year of construction: 1980, pressure 25 t no. of strokes 1500 Hub/min total power requirement 20 kW Kdedpovu E Iqjfx Aklsr

Condition: used, Year of construction: 1987, pressure 40 t no. of strokes 500 Hub/min Kdedpfevu E Iwox Aklsr total power requirement 5,5 kW

Condition: used, Year of construction: 1985, pressure 25 t no. of strokes 1500 Hub/min total power requirement 20 kW Kdedpfxsvu E I De Aklsr

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press) Kdjdot Hwz Nspfx Aklsr

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6366 1 x Zumex cold-press commercial juicer. Complete with juice bags, alternative blades and all the necessary accessories. Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products. Kdjdpeyh I Tkjfx Akler Manufacturer - Zumex Food Engineering. Model - MASTERY. Date of manufacture - 2021. The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Production capacity - from 30 L/h up to 110 L/H. Deposit capacity - 3 litres. Touch Control Display - 4.3" Colour. Pression Power - 11,000 kg. Electrical requirements - 220-240 V / 50 hz / 1 phase.

Condition: used, Year of construction: 1994, KAISER Press Kdodpjzp Ed Refx Aklsr Pressing force 4,000 kN Stroke adjustment 40-200 mm Ram adjustment 150 mm Stroke rate 20-80 1/min Table area 2,340 x 1,600 mm Ram area 2,000 x 1,500 mm Installation height 550 mm

Condition: used, Year of construction: 1991, saw blade diameter 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm feed length 600 mm feed length: multiple 1800 mm cutting speed 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees 60 total power requirement 5,5 kW weight of the machine ca. 1,8 t dimensions of machine L x W x H 2,60 x 1,21 x 1,98 m - mitre cutting +/- 60 ° with DRO - Kjdpjv Hhrvefx Akljdr Accessories: new sawblade 400 mmø, coolant

Condition: used, Year of construction: 2001, functionality: fully functional, The Schaal SEP 80 is a 80-ton eccentric press designed for precision stamping and forming. Its Unidor electronic control system ensures repeatable stroke accuracy and fast setup, while the integrated tool safety device protects dies from damage caused by misfeeds or incorrect part positioning — reducing downtime and tooling costs. The machine features a rigid double-column O-frame in vibration-damping cast iron, 6-point play-free roller ram guidance, and a flywheel drive with pneumatic clutch/brake combination. It comes equipped with a gripper feeding device SZV 302 feed unit for automated strip feeding. Pressing force: 800 kN (80 tons) Strokes per minute: 60 – 320 min⁻¹ Ram stroke (adjustable): 8 – 80 mm Ram adjustment: 80 mm Ram surface: 700 × 500 mm Table size (clamping plate): 830 × 700 mm Clamping plate thickness: 80 mm Table opening: 500 × 200 mm Strip feed clearance: 120 ± 40 mm Feed unit: Schaal SZV 3 Strip width: 10 - 270 mm Thickness: 0 – 4 mm Drive power: 21.5 kW Kdsdpfx Akezhw Hueljr Weight: 8,000 kg Footprint: 1,500 × 2,000 mm, height: 2,885 mm

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm. Further used machines by Mabu, Bruderer, Bihler and Schaal are available for sale from our stock. Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Adjustable stroke 8–80 mm Distance table-to-ram (max, ram down, with bolster) 310 / 355 mm Ram adjustment 80 mm Ram dimensions 500 × 400 mm Ram bore Ø 50 × 90 mm Ram keyway 30 H7 mm Table size 830 × 700 mm Bolster plate thickness 80 mm Through-hole in table 500 × 200 mm Strip pass line over table (with bolster) 120 mm ± 40 mm Total installed power 26 kW Supply voltage 3 × 400 V, 50 Hz Rated current 40 A Pre-fuse 50 A Weight 8,000 kg Kedpozab Ibefx Aklsdr Feeder SCHAAL SWV 3E roll feeder Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm

Year of construction: 2007, condition: good (used), functionality: fully functional, For sale: complete Farmet two-stage cold oil pressing line for rapeseed and sunflower seed. Manufacturer: Farmet Main equipment: FS1000 pre-press + FS1000 final press Pre-press motor: 55 kW Final press motor: 45 kW Filtration: automatic oil filtration system, approx. 10 m² Capacity: up to approx. 1,400 kg/h depending on seed quality, moisture, temperature and operating setup Daily capacity: up to approx. 32 t/24 h Condition: used, fully functional Location: Slovakia, EU The line is designed for double cold pressing of high-oil seeds such as rapeseed and sunflower seed. Included: Farmet FS1000 pre-press Farmet FS1000 final press Automatic oil filtration system, approx. 10 m² Oil piping / connection equipment as shown in the photos Electrical and control components as shown in the photos The two-stage pressing process allows higher oil recovery from high-oil seeds while keeping the process natural and energy-efficient. The filtered oil can be stored after removal of cake residues and solid particles. Suitable for: rapeseed oil production sunflower oil production cold pressed oil production organic / non-GMO oilseed processing small and medium oil mills feed cake production The line is available for inspection in Slovakia. Sold as shown in the photos. Loading possible. Price: FCA Slovakia, plus VAT. Zu verkaufen: komplette Farmet Zwei-Stufen-Kaltpresslinie für Raps und Sonnenblumenkerne. Hersteller: Farmet Hauptausstattung: FS1000 Vorpresse + FS1000 Endpresse Motor Vorpresse: 55 kW Motor Endpresse: 45 kW Filtration: automatische Ölfiltration, ca. 10 m² Kapazität: bis ca. 1.400 kg/h, abhängig von Saatqualität, Feuchte, Temperatur und Einstellung Tagesleistung: bis ca. 32 t/24 h Zustand: gebraucht, voll funktionsfähig Standort: Slowakei, EU Die Linie ist für die doppelte Kaltpressung ölreicher Saaten wie Raps und Sonnenblumenkerne ausgelegt. Enthalten: Farmet FS1000 Vorpresse Farmet FS1000 Endpresse Automatische Ölfiltration, ca. 10 m² Rohrleitungen / Verbindungsteile wie auf den Fotos Elektrische und steuerungstechnische Komponenten wie auf den Fotos Das zweistufige Pressverfahren ermöglicht eine höhere Ölausbeute bei ölreichen Saaten und bleibt gleichzeitig ein natürlicher und energieeffizienter Prozess. Geeignet für: Rapsölproduktion Sonnenblumenölproduktion kaltgepresste Öle Bio- / Non-GMO-Ölsaatenverarbeitung kleine und mittlere Ölmühlen Presskuchenproduktion für Futtermittel Kedpsxuafyofx Aklsdr Besichtigung in der Slowakei möglich. Verkauf wie auf den Fotos.

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: P25291, Please provide us with your offer price. Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. Any warranty is excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals. Kodjzmqlhepfx Akledr

Condition: used, machine/vehicle number: 008341, Max working length: 2480 mm Max working width: 880 mm Kjdpex A Tf Aofx Akledr No of Pressing cylinders: 4 No of Daylights: 1

Condition: excellent (used), Complete screen printing line with all this included : CAROUSEL PRESS , CONVEYOR DRYER , FLASH CURE UNIT , AIR COMPRESSOR , and 200 ALUMINUM FRAMES . Suitable for professional textile printing and high-volume production. M&R’s Sportsman EX automatic textile presses offer exceptional value and quality at an amazingly affordable price. Sportsman EX 1618 is available in 6, 8, and 10-color models with a maximum image area of 41 x 46 cm (16" x 18"). Sportsman EX 2020 is available in 6, 8, 10, and 12-color models with a maximum image area of 51 x 51 cm (20" x 20"). Kedpjzcuztsfx Akljdr

Condition: ready for operation (used), Year of construction: 1995, operating hours: 41,000 h, functionality: fully functional, FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With Automatic Strip Feeder BBV 190 500 kN | 100–1120 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 500 kN Stroke rate: 100–1120 strokes per minute Working hours: 41000 h Main motor: 22 kW Control voltage: 24V DC Power connection: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 /44 / 51  mm Shut height adjustment: 64 mm Working Dimensions: Max tool installation width: 1100 mm Strip pass width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Strip entry height adjustable: 60–140 mm Max strip width: 120 mm Max feeding pitch: 85 mm Max material thickness: 4 mm Feeding angle: 180 Deg Machine Dimensions (with BBV 190): Machine footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 190 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Kodpfx Akewpg Rbelsdr Condition & Delivery: Machine in excellent technical and visual condition Fully serviced and tested Immediate availability from Europe Worldwide shipping & installation support available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW dimensions of the machine ca. 1,8 x 1,1 x 2,0 m Automatic cold circular saw - CNC control - Micro-lubrication system Kedpfozlkvdex Akljdr

Condition: used, Year of construction: 1990, Technical details: Kdjdpju Icxqefx Aklor Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets *