Used Combined Bending +3W Sheet Round Bending Machine for sale (67,308)

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical data: - Bending operation and rolling operation by hand, - max. working width 1020 mm - max. material thickness St 40 1,25 mm - bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 85 mm - max. adjustability bending beam 20 mm - shaft diameter 55 mm - upper shaft swivels out - rear shaft parallel + inclined adjustable Hsdpfxof S Tg To Akzen - space requirement approx. W 1500 x H 1400 x D 750 mm - weight approx. 400 kg

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen Hsdpfx Aohmmfkjkzjn - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: good (used), sheet width: 1070 mm plate thickness: 1,6 mm roll dia. top roll: Ø 70 mm roll dia. bottom roll: Ø 70mm weight of the machine ca.:t dimensions LxWxH: 1,9 x 0,6 x 1,12 m Hodpfx Ajg Rypmokzon - upper roll can be swing out - operation via hand wheel

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Hsdowpku Depfx Akzon Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: new, Year of construction: 2026, - Capacity 700 x 4 mm Oxbmp - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds - Conical roller - Rotating upper roller - Brake motor Hsdjh Rbvgopfx Akzen - Foot switch - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2026, number of rollers: 3, - Capacity 700 x 4 mm - Conical rollers Hodpjh Raytjfx Akzen - Removable top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 18,972 h, machine/vehicle number: 363/11, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 150 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of upper roll: 130 mm Diameter of lower rolls: 150 mm MACHINE DETAILS Hodpfx Ajy Hhwqskzsn Control: CNC Drive: Hydraulic Number of rolls: 4 Number of driven rolls: 4 Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,200 x 1,200 mm Transport weight: 2,000 kg Transport packages: 2 Operating hours: 18,972 h EQUIPMENT Cone bending CE marking

Condition: good (used), In good technical condition and fully functional. Hsdpfey Hr R Iex Akzjn Year of manufacture: 1981 Max. working length: 3000 mm Max. sheet thickness: 25 mm

Condition: good (used), Scharringhausen round bending machine Type: UDR-X1-3 Capacity: 3000 x 30 mm Tube length: 3100 mm Upper tube diameter: 470 mm Lower tube diameter: 410 mm Engine power: 70 HP Dimensions: 830x245x295 cm LxWxH Weight: ca 55000 KG Included documentation Hsdpfx Aeimmb Iskzsn Movie available!

Year of construction: 2026, condition: new, functionality: fully functional, Technical data: Working width: 2540 mm Maximum sheet thickness: 2.5 mm Hodpfxoytparo Akzen Maximum bending angle: 135° Length: 2880 mm Width: 1020 mm Height: 1450 mm Weight: 1300 kg Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, total width: 350 mm, total length: 1,500 mm, total height: 530 mm, bending angle (max.): 135 °, Manual Sheet Metal Bending Machine The bending machine allows the production of complex profiles and bends. Thanks to the segmental design, it is possible to perform advanced sheet metal forming operations. Our model features an improved construction – thanks to the simple and quick removal of segments, it is possible to bend channels, boxes and similar shapes. The segments on the upper beam are mounted with Allen screws. Tilting by means of a handle Upper clamping beam with a 45° apex angle Easy positioning of the upper clamping beam; removable segments for box bending The machine is equipped with a deflection compensation adjustment system (when bending thicker sheets it eliminates the so-called “banana effect”) Technical Specifications Working length: 1220 mm Maximum sheet thickness: 1.5 mm Maximum opening height: 30 mm Bending angle: 0–135° Dimensions (L × W × H): 1500 × 350 × 530 mm Weight: 165 kg Segments: 5 × 50 mm / 6 × 76 mm / 5 × 102 mm SEGMENT SHEET METAL BENDING MACHINE 1220 × 1.5 MTP 165 KG Delivery Terms The machine is brand new 12-month warranty Hjdeytfabspfx Akzsn Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Hsdpfsid Al Njx Akzsn Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: excellent (used), Year of construction: 1998, Technical data: Working width: 2000 mm Bending capacity: 25.0 mm Pre-bending: 20.0 mm CNC control Top roller diameter: 320 mm Middle roller diameter: 320 mm Hedpfjv Htniex Akzjn Side roller diameter: 240 mm Hardened rollers Conical bending device by tilting the two side rollers Mobile control panel with digital display Engine power: 11 kW CE mark Dimensions (length x width x height): approx. 4500 x 2000 x 1900 mm Weight: approx. 11 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear are in keeping with its age; used machines are sold without any warranty.

Condition: good (used), Round bending machine with hand crank operation, max. working width 2 m, old, stable and heavy cast iron machine. Hsdoyf Uahopfx Akzen

Condition: new, Cesurbend 3-roll round bending machine MRS 1250 x 140 Technical specifications: Special equipment included in the price: hardened rolls motorized back roll adjustment digital display sheet width 1250 mm sheet thickness 5,5 mm max. sheet thickness 5,0 mm bending roll length 1250 mm roll diameter 140 mm weight 1150 kg dimension L-W-H 2020 x 900 x 1200 mm motor: 2.2 KW Equipment: upper and lower roller electr. driven upper roller can be swung out conical bending device asymmetric roller arrangement Hedpfxoh Timpj Akzon self-braking main motor sep. control and operation panel safety line CE mark

Condition: new, Year of construction: 2026, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. Hjdpfx Aeg In Azjkzon Folding bench RED-2200 / 0.8 including transport rollers Bending machine folding bench with side cutouts for bending from top to bottom. Thanks to him, you will finish your windowsill. In the machine construction there is a space for curved machining at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm - bending capacity: up to 0.8 mm (sheet steel) - All non-ferrous metals 30% more bending capacity - Bending angle: max. 145 degrees - Folding beam thickness: 15 m - lifting the top beam in three positions - Upper beam stroke: 80 mm Degree scale Angle stop rear frame to hold the sheet metal front depth stops - Weight: approx. 250 kg The roller shears (max. Cutting performance 0.8 mm / steel) plus 350 euros - Hand folding machine plus 75 euros The machine complies with the CE guidelines and has a 12 month guarantee. Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-Community delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 10659, roller (bottom) diameter: 300 mm, roller (top) diameter: 350 mm, working width: 3,000 mm, sheet thickness (max.): 25 mm, empty load weight: 24,000 kg, TECHNICAL DETAILS Number of rollers: 4 pcs Hodpfxoyua Ezj Akzjn Max. sheet thickness: 25 mm Max. working width: 3,000 mm Upper roller diameter: 350 mm Lower roller diameter: 300 mm MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,300 x 2,000 x 1,800 mm Unladen weight: 24,000 kg Transport packages: 1 pc.

Condition: new, Type: Motorized Working length: 1.050 mm Roller diameter: 110 mm Pre-bending capacity: 4 mm Bending capacity: 5 mm Motor: 2,2KW Minimum bending diameter: 150mm Upper and lower roller driven by a single gear system. Rollers with SAE 1050 quality certificate of high tensile strength. Conical bending system Hsdpfx Aoug Un Ejkzsn Induction treated and hardened rollers Wire grooves at the end of the rollers.

Condition: used, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-forming sheet metal seams For producing a seam bend Hodpfx Aksdzqblszen Seam bending machine for thin sheet metal as an alternative to a press brake Serial no.: 9166002 Year of manufacture: 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Required space (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The seam is the doubling over of the sheet metal edge (1x folded over) to increase the stiffness of the sheet. By folding over, a rounded edge is created, reducing the risk of injury from sharp sheet edges. Ideal for metalworking applications such as sheet metal furniture, cladding panels, or for the production of ventilation and silencer components.

Condition: used, Hand - swing bending machine KRAMER type AMS 650 x 1,5 Hand swivel bending machine, press brake year of construction approx. 1985 working length 650 mm sheet thickness at 40 kg/mm2 1,5 mm upper beam opening approx. 60 mm bending beam adjustment ca- 0-25 mm Hedsdzqaaepfx Akzsn bending angle 0-180 - Upper beam adjustment via hand crank - pre-screw rail for the bending beam - one-piece sharpening rail 135° space requirement L x W x H 1200 x 600 x 1100 mm weight 160 kg good condition

Condition: new, Ostas ORM 1570x140 Premium - 3-roller sheet curling machine with top equipment Additional equipment included - Motorized rear roller - Digital display for rear roller - Hardened rollers Standard equipment - Cast steel main frame - quality-certified SAE 1050 steel rollers - top and bottom rollers with individual gears - conical bending device - Wire grooves at the end of the rollers - mobile control panel - Compliance with CE standards - user manual Technical data - Bending length: 1570 mm - Bending capacity: 4 mm - Roller Ø: 140 mm - Roller speed: 3.5 m/min - Motor power: 2.2 kW - Dimensions WxHxD: 2725 x 1100 x 800 mm - Weight: 1450 kg Hedpsuzhy Tefx Akzon

Condition: new, number of rollers: 3, roller (bottom) diameter: 76 mm, roller (top) diameter: 76 mm, side roll diameter: 76 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 1.5 mm Hedpfx Aoh Ralqekzsn - Conical rolling - Removable top roller - Foot control - Emergency stop - Documentation - 400V

Condition: new, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 2,070 mm, number of digital displays: 1, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity 2070 x 1.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - Conical roller - Swiveling top roller Hodpfxjvkkkie Akzon - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, side roll diameter: 130 mm, roller length: 1,070 mm, sheet thickness steel (max.): 5 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity 1070 x 5 - Electrically adjustable rear roller - Digital display for the movement of the rear roller Hjdpfsirwlaex Akzjn - Hardened rollers - Conical rolling - Rotating top roller - Brake motor - Foot control - Emergency stop - documentation - 400V

Condition: new, Year of construction: 2025, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,070 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1070 x 3 mm - Conical rollers Hedpfxewhgm Ts Akzon - Pivoting top roller - Foot pedal control - Brake motor - Emergency stop - Documentation - 400V