Used Continuous Film Dryer Agglomerator for sale (8,565)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Dksdpfx Apowg Sgcstet Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Dkedpfx Ajwg Sd Ueptet Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 50 h, functionality: fully functional, Continuous dryer / laboratory machine Continuous dryer with infrared heating element (LEISTER) Suitable, for example, for furniture, moulding, or window construction Dkodoxhxmvjpfx Aptot The system was purchased for measuring drying times. Transport (crawler transport) consisting of chain drive with supporting trays Feed via frequency inverter, 1–10 m/min. Passage width: max. 300 mm

Year of construction: 2012, condition: ready for operation (used), An SMT continuous drying system is available. Infeed height range: 850mm-950mm, process chamber length: 12500mm, heating zones: 9, bottom heating zones: 4, heating length: 4500mm, convection section: 4500mm, max. process temperature: 230°C, cooling zones: 12, cooling zone length: 6775mm, cooling units: 3, conveyor type: PTFE belts, conveyor width: 800mm, working width: 800mm, max. speed: 3m/min, top/bottom clearance: 30mm/0mm, exhaust connection diameter: 300mm, machine dimensions X/Y/Z: approx. 13000mm/2000mm/2350mm, weight: approx. 7200kg. Documentation available. An on-site inspection is possible. Dodpfx Aeznx H Neptokt

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Dkjdpfxjy E S E Ao Aptet

Year of construction: 2021, condition: ready for operation (used), A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Dkodpfoy E S E Nox Aptet

Condition: good (used), continuous welding machine, film welding machine -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm Dksdpfx Apovyq Dustot -Weight: 12.1 kg

Condition: new, functionality: fully functional, For sale: Huatai 1.5 TPD lecithin drying line with thin film evaporator and vacuum system. New / unused lecithin drying line for soybean lecithin processing, supplied by Huatai. The line is designed for vacuum drying of crude / wet lecithin and reduction of moisture under controlled temperature and vacuum conditions. Main equipment includes: Thin film evaporator / lecithin dryer Lecithin conditioning tank Finished product tank Hot water tank Lecithin cooler Vacuum pre-condenser Vacuum liquid seal tank Receiving / collection tanks Steam separator / steam distribution vessel Pumps, piping, valves and auxiliary equipment Electrical control cabinet / MCC Djdszivkbspfx Aptekt Technical data: Capacity: approx. 1.5 TPD lecithin Process: vacuum drying / thin film evaporation Installed power: approx. 25.2 kW Product contact parts according to manufacturer specification Equipment finish: carbon steel vessels, painted industrial finish; stainless steel parts where required by process design Typical application: soybean lecithin drying crude lecithin moisture reduction vegetable oil refinery lecithin processing lecithin concentration after degumming food / feed / industrial lecithin processing The line is suitable for small and medium vegetable oil processors who want to add lecithin drying and value-added lecithin production to an existing degumming / oil refining process. The equipment is new and unused. Manufacturer: Huatai. EU seller: Leonagra s.r.o. EU invoice possible. Delivery to Europe can be arranged. The listing includes a process schematic and a realistic visual representation of the complete line. Final layout and painting colour can be coordinated before delivery. Inspection / video call with manufacturer can be arranged on request. Price: FCA / delivered EU by agreement, plus VAT where applicable. Zu verkaufen: Huatai 1,5 TPD Lecithin-Trocknungslinie mit Dünnschichtverdampfer und Vakuumsystem. Neue / unbenutzte Anlage zur Vakuumtrocknung von Sojalecithin. Die Anlage ist für die Trocknung von Rohlecithin bzw. feuchtem Lecithin unter kontrollierten Vakuum- und Temperaturbedingungen ausgelegt. Hauptkomponenten: Dünnschichtverdampfer / Lecithin-Trockner Lecithin-Konditionierungstank Fertigprodukttank Heißwassertank Lecithin-Kühler Vakuum-Vorkondensator Vakuum-Flüssigkeitsverschlussbehälter Auffang- / Sammeltanks Dampfverteiler Pumpen, Rohrleitungen, Ventile und Zubehör Schaltschrank / MCC Technische Daten: Kapazität: ca. 1,5 TPD Lecithin Verfahren: Vakuumtrocknung / Dünnschichtverdampfung Installierte Leistung: ca. 25,2 kW Industrieausführung mit lackierten Kohlenstoffstahlbehältern; Edelstahlteile dort, wo prozesstechnisch erforderlich Geeignet für Sojalecithin, Pflanzenölraffination, Lecithin-Trocknung nach Degumming und kleinere bis mittlere Ölmühlen / Raffinerien. Hersteller: Huatai. Verkäufer in der EU: Leonagra s.r.o. EU-Rechnung möglich. Lieferung nach Europa kann organisiert werden. Besichtigung / Videocall mit dem Hersteller auf Anfrage möglich. Preis: nach Vereinbarung, zzgl. MwSt.

Condition: ready for operation (used), Plastic Film Wash Line with Extruder Available in Ireland Can be seen running if necessary Dkodpszylxiefx Aptst Sink Float Tank Centrifuge Washer Dryer Extruder Granulator Shredder Everything required for the washing and recycling of Plastic Material 1 Tonne per Hour

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22100304, total length: 10,900 mm, total width: 2,840 mm, total height: 1,142 mm, overall weight: 4,000 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Through-feed dryer including exhaust ducts (each approx. 7.5 m) in double-walled stainless steel design! MACHINE DETAILS Max. solvent throughput: 5.00 kg/h Air and exhaust specifications Pipe diameter: 150 mm Exhaust air volume: approx. 900 m³/h Dsdex Arq Dopfx Aptokt Temperature: max. 180°C Pressure loss: max. 100 Pa Fresh air volume: approx. 1,800 m³/h (Σ) Dimensions & Weight Dimensions (L x W x H): 10,900 x 2,840 x 1,142 mm Total weight: 4,000 kg Input voltage: 400 V Input current: 22 A EQUIPMENT Documentation/manual Exhaust ducts (double-walled stainless steel version, each approx. 7.5 m)

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm Dodpsyzaamjfx Aptskt inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar

Year of construction: 2021, condition: new, functionality: fully functional, machine/vehicle number: sn: 1100056463, This is a miniature Büchi B-290 spray dryer (Mini Spray Dryer), a high-quality piece of equipment suitable for various laboratory processes. It is a reliable and efficient tool for your laboratory experiments. This device is designed to provide consistent and accurate results with each use. Thanks to its excellent features, this spray dryer is ideal for the medical sector, laboratories, healthcare equipment and devices, the dental field, and industrial applications. It is a BÜCHI brand, model B-290 Mini Spray Dryer, serial number 100056463, year 2021; this equipment is NEW. Dkjdpfszgw Tlsx Aptjt Take advantage of this opportunity to acquire this exceptional tool and benefit from its practicality and performance.

Condition: used, Year of construction: 2017, Multi-story press Manufacturer: Bürkle Type: 1428/50 Year of manufacture: 2017 Process description The uncompressed, assembled door elements are transferred from an on-site automatic transport system to the Bürkle press line to be delivered. In the loading basket, the door elements are individually collected on each story. Once the basket is full, the door elements are alternately transported to the upper or lower press chamber of the multi-story press. The upper or lower press chamber of the press is unloaded using the unloading basket, while maintaining the order of the parts. This process represents a continuous cycle without waiting times, as the upper and lower press chambers are alternately loaded and unloaded. The collecting function of the loading basket is equipped with a timer: if the set maximum waiting time for uncompressed door blanks is reached, the press is automatically loaded, even if there are fewer than the maximum possible number of door blanks. Loading basket (4 stories) The basic structure is a bolted/welded construction made of steel profile tubes. The lifting basket with its 4 transport levels can be moved vertically between the two lifting columns and is guided by special plastic rollers. The vertical movement of the lifting basket is carried out by a lifting mechanism with a frequency-controlled electric geared motor with brake. The lifting mechanism is mounted on the lifting columns. The 4 transport levels consist of belt conveyors and serve to gently transport the uncompressed material into the press. Technical data Number of stories: 4 Conveyor belt: PVC Drive: Electric geared motor (frequency-controlled) Transport length: 3000 mm Transport width: 1400 mm Story spacing: 210 mm Overall height: ~ 4200 mm Infeed/transfer height I: 900 mm Infeed/transfer height II: ~1,400 mm Optima press 1428 / 50 (2 x 4 stories) The basic structure of the press consists of several uprights and three press tables, with the middle press table being fixedly mounted on the uprights. Both the upper and lower press tables are arranged so that they can be moved vertically relative to the middle press table. The movable press tables are each equipped with a synchronizing mechanism and an integrated safety system. This configuration creates an upper and a lower press chamber. In these press chambers, the heating plates are movably suspended via a tie rod system, thus forming the individual stories. The opening and closing of the press chambers is carried out by hydraulic cylinders that are attached to cylinder suspension points. Each story is equipped with a separate transport film drive, via which the workpieces are fed in and out. The exact movement of the film is ensured by an electro-pneumatic film guide and tensioning device. The heating plates consist of steel plates that have been machined on all sides. These are equipped with channels that have been drilled from solid for the circulation of the heating medium and additional transverse channel bores for ventilating the film. All essential screw surfaces of the press tables are face-milled and fitted with keyed connections. The pressing pressure and pressing time can be individually controlled for each chamber. Dkedpfx Ajzzcqljptst Technical data Heating plate length: 2,800 mm Heating plate width: 1,400 mm Maximum workpiece length: 2,500 (2,600) mm Maximum workpiece width: 1,250 mm Heating plate thickness: 70 mm Number of chambers: 2 Number of stories per chamber: 4 Story spacing: 210 mm Number of

Year of construction: 2013, condition: ready for operation (used), Mariani Shrink film wrapper Dkedeyilyqjpfx Aptjt Model: TRM 700-LF-I YOM 2013 Including in/outfeed conveyor system Working width: 700mm Cardboard Trays – Cases with protective shrinked film Portion packs : 3 x 8 – 3 x 9 – 3 x 10 Family packs : 2 x 6 – 3 x 4 Output: Max 25 trays per min, varying according to the format required Dimensions machine (LxWxH): 5000x1400x2100mm

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 6-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 6-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. Dkodpex Uqxgefx Aptot at 5 bar (g): 0.19 to 0.89 m³/min at 6 bar (g): 0.19 to 0.86 m³/min at 7 bar (g) : 0.19 to 0.82 m³/min at 8 bar (g) : 0.18 to 0.78 m³/min at 9 bar (g) : 0.18 to 0.76 m³/min at 10 bar (g) : 0.18 to 0.69 m³/min at 11 bar (g) : 0.18 to 0.67 m³/min at 12 bar (g) : 0.17 to 0.63 m³/min at 13 bar (g) : 0.17 to 0.59 m³/min Nominal power drive motor: 5.5 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400 V / 73-290 Hz Compressed air connection: 3/4“ G Length: 1530 mm Width: 640 mm Height: 1520 mm Weight: 470 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 16 Bar 3-60 degrees C Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Total length: 982 mm Total height: 1,612 mm Overall weight: 249 kg Dedjyy U I Nopfx Aptskt Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m Dsdpfx Apjzg Iw Ijtskt - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Condition: excellent (used), Year of construction: 2026, operating hours: 5 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 15-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Base Operatin hours: 5 Technical specifications Type: Combi XP 15-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.50 to 2.49 m³/min at 6 bar (g): 0.48 to 2.41 m³/min at 7 bar (g) : 0.48 to 2.32 m³/min at 8 bar (g) : 0.45 to 2.23 m³/min at 9 bar (g) : 0.45 to 2.12 m³/min at 10 bar (g) : 0.45 to 2.02 m³/min at 11 bar (g) : 0.45 to 1.90 m³/min at 12 bar (g) : 0.44 to 1.80 m³/min at 13 bar (g) : 0.43 to 1.69 m³/min Nominal power drive motor: 15 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/85-400/3 V / Hz / ~ Compressed air connection: 3/4“ G Length: 1530 mm Width: 700 mm Height: 1640 mm Dksdjw Du Dxspfx Aptet Weight: 595 kg Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: good (used), Year of construction: 2018, Recycling technology, agglomerator, high-performance mechanical dryer, dry cleaner, plastic recycling machine, drying system -Handover: in its current condition as inspected -Condition/Scope of delivery: untested, as shown in the pictures -Manufacturer: WIPA, Dry Cleaner Mechanical High-Performance Dryer -Type: MD 1250-3000/90/0.75/3R -Drive motor: 90 kW -Drum length: 1800 mm Djdpfx Apjztndujtokt -Sieve: Perforation Ø 5 mm -Dimensions: Dryer 4475/2140/H2630 mm / Control cabinet 1200/660/H2195 mm -Weight: 8400 kg / 340 kg

Condition: new, Year of construction: 2025, machine/vehicle number: TR0042_ALM_RD56, COMPRESSED AIR DRYER ALMIG ALM-DGO 180 Type: ALM-DGO 180 Delivery quantity: 3.00 m³ / min * * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 5 ° C -Constant pressure dew point from +3° to +5°C for maximum process reliability. -Minimal pressure lice ensures immediate energy savings -Short start and response times ensure fast availability -Optimized heat exchanger design for maximum efficiency -Robust design for reliable continuous operation -Refrigerant R513a: efficient, environmentally friendly and durable -Low space requirement Max. working pressure 16 bar Max. inlet temperature 70°C Min./max. ambient temperature +5 to +50°C Pressure drop: 0.18 bar Ø power consumption: 0.47 kW Voltage/Frequency: 230V/50Hz Compressed air connection 1" Djdpfxsy Rqw Us Aptskt Dimensions: L x W x H: 462 x 399 x 541 mm Weight: 34 kg For new machines, convenient leasing via our house bank is possible. Visit our store. We always have a wide range of new and used compressors in stock!

Year of construction: 2003, condition: used, functionality: fully functional, maximum load weight: 100 kg, total length: 1,965 mm, total width: 1,970 mm, total height: 2,550 mm, loading space volume: 2 m³, machine/vehicle number: 03108, Heavy-Duty 100 kg Steam-Heated Industrial Tumble Dryer for Garment & Textile Processing The Triveneta Grandi Impianti E/100 R.V. is a heavy-duty industrial steam-heated tumble dryer manufactured by Triveneta Grandi Impianti S.r.l., Italy. Designed for continuous industrial laundry and textile finishing operations, this high-capacity dryer is ideal for garment manufacturing, denim production, commercial laundries, and other high-volume drying applications. This unit (MASI internal reference K672) was used in professional apparel production until the factory shutdown and remained operational. Technical Specifications • Manufacturer: Triveneta Grandi Impianti S.r.l. • Model: E/100 R.V. • Machine Type: Industrial Steam-Heated Tumble Dryer • Serial Number: 03108 • Year: 2003 • Country of Manufacture: Italy • Maximum Load Capacity: 100 kg • Heating System: External Steam Supply • Power Supply: 400 V, 3-Phase, 50 Hz • Machine Weight: Approximately 1,450 kg • Dimensions: • Width: 1,970 mm • Depth: 1,965 mm • Height: 2,550 mm Key Features • High-capacity industrial drying drum • Steam-heated drying system • Digital microprocessor control • Programmable drying cycles • Pneumatic door opening system • Stainless steel front loading door • Twin exhaust and ventilation system • Integrated lint filter housing • Emergency stop system • Heavy-duty industrial construction • Designed for continuous production environments Dkjdpfx Aszmwdksptjt Includes • Triveneta Grandi Impianti E/100 R.V. tumble dryer • Integrated microprocessor control panel • Steam connection interfaces • Lint filtration system • Pneumatic door system • Industrial support frame Applications • Garment manufacturing • Denim production • Industrial laundry operations • Textile finishing • Commercial laundry facilities • Industrial garment drying • High-volume textile processing Condition • Fully operational prior to factory shutdown • Previously used in professional garment production • Good industrial condition • Structurally complete • Normal cosmetic wear consistent with industrial use • Minor surface oxidation around the door frame • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, electrical, and utility connections, dismantling, loading, transportation, and all related costs. Professional rigging and lifting equipment are recommended due to the machine's approximately 1.5-tonne weight. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation. The machine is available individually or together with the complete industrial laundry and finishing line.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Dkedjzy Hv Ajpfx Aptet Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Dkodpfszy Hf Rsx Aptet Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available.

Condition: used, Scott HST Mixer Model 2496 Continuous High Intensity Mixer with liquid injection. Extremely versatile blender employed for a wide range of duties, including: • Mixing of dry powders • Liquid addition to dry powders • Agglomeration (with additional of liquid binder) • Coating Adjustable paddles to control retention time. Dkedjzvgmmopfx Aptst Large access doors for ease of cleaning. Installed Power – 45 kW. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: new, Year of construction: 2026, The HDE Series Hopper Dryers are designed for efficient drying of plastic granules before extrusion, injection molding, and blow molding processes. Moisture contained in plastic materials can cause defects such as bubbles, silver streaks, poor surface finish, and reduced mechanical properties. The HDT Series effectively removes surface moisture using a controlled hot-air circulation system, ensuring stable processing conditions and consistent product quality. All material-contact surfaces are manufactured from stainless steel, preventing material contamination while providing excellent corrosion resistance and long service life. The precision cast aluminum hopper offers excellent heat retention and ensures uniform drying throughout the entire material batch. A specially designed hot-air diffuser distributes heated air evenly inside the hopper, significantly improving drying efficiency. The low-noise blower delivers stable airflow while preventing dust from entering the material. The hopper is equipped with a material level inspection window, an auto loader mounting port, and safety systems protecting against overheating and motor overload. The modular design allows quick cleaning and fast material changes, making the HDT Series suitable for continuous industrial operation Technical Specifications Hopper Dryer HDE-25 • Hopper Capacity: 25 kg • Blower Power: 135 W • Heater Power: 3.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 3.6 kW • Installation Size: 150 × 150 mm • Dimensions (L × W × H): 830 × 580 × 840 mm • Weight: 34 kg Hopper Dryer HDE-50 • Hopper Capacity: 50 kg • Blower Power: 155 W • Heater Power: 4.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 4.7 kW • Installation Size: 160 × 160 mm • Dimensions (L × W × H): 920 × 590 × 940 mm • Weight: 45 kg Hopper Dryer HDE-100 Technical Specifications • Hopper Capacity: 100 kg • Blower Power: 215 W Dkodpfx Ajzv Emljptet • Heater Power: 6.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 6.7 kW • Installation Size: 178 × 178 mm • Dimensions (L × W × H): 1070 × 700 × 1080 mm • Weight: 68 kg