Used Continuous Pasteurizer Kombi for sale (6,041)

Year of construction: 2026, condition: new, Continuous pasteurizer electric with preheating of the juice in the coaxial tube heat exchanger They use available low-cost energy (e.g. from solar, heat pump, biogas, tec.) although the temperature level is not sufficient for pasteurization. The rest of the temperature increase to pasteurization level is done electrically (with less energy requirement). The components: Preheating: * Coaxial tubular heat exchanger (KRWT) with thermal insulation (max. 60kW) thermal * Mixing unit incl. circulation pump ensures a stable inlet temperature of the heating water Continuous pasteurizer electric: * Electric heater 13.5 / 18 / 27 / 31.5 kW - 400 V * Tank (stainless steel) 150 ltr. with thermal insulation with stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump Pasteurizer mounted on chassis Simple operation Total capacity up to 1100 liters per hour ##### Todpfx Abeuadm Dotsb RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2022, condition: ready for operation (used), An unused and still originally packaged continuous pasteurizer Pietribiasi Michelangelo Srl is available. Throughput capacity milk: 1500l/h, throughput capacity cream max. 40% fat: 750l/h, inlet temperature: 6°C, pasteurization at 68/74/88°C, outlet temperature: 6°C, capacity foreflow tank-balance tank: 100l. With centrifugal pump for product and cleaning, additional section and hot water group, plate heat exchanger with stable internal construction in AISI304, special heat exchanger plates Sondex Denmark in AISI316, surface area per plate: 0.08m², flow volume per plate: 0.21dm³, special gaskets made of nitrile snap-on without glue, hydraulic test pressure: 8.0bar, test temperature: 110°C, heat recovery: 85%, temperature profile 6-68/74/88-6/33/45°C - 4 sections, final heating outlet cheese/yogurt: 33/45°C, media: approx. 3000+3000l/h hot water 92°C, approx. 3000l/h cooling water 2°C, holding tube for 15s, design stainless steel AISI304, switching system for product to the foreflow tank by means of pneumatic changeover valve as soon as the heating temperature is approx. 2°C below the setpoint, 2x hot water generators for pasteurization and final heating, closed circuit, assembly for automatic water supply, automatic system for hot water supply, expansion vessel, pump, brazed plate heat exchanger. Documentation available. An inspection on site is possible. Tedpfxsyln D Te Abtjb

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump Todpfx Abst Uzitetsb ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: excellent (used), RUWI Kombi-Unterflurfräse – Professional Under Table Router – Made in Germany Manufacturer: RUWI GmbH (Germany) Model: Kombi-Unterflurfräse Year of manufacture: 2013 Power supply: 230 V / 50 Hz Price: €1,750 (Negotiable) Professional RUWI under-table router, manufactured in Germany. A robust and precise machine designed for professional woodworking, furniture production and joinery workshops. Features • Original RUWI machine • Heavy-duty steel construction • 230 V power supply • Smooth and precise operation • Suitable for profiling, grooving, edge shaping and general routing work • Compact design with high stability • Made in Germany Condition • Fully functional and ready to work. • Well maintained. • Can be inspected and tested before purchase. Todpfezmunyex Abtsb

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: Tjdpfx Abozg Dlbstob • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 13960, overall weight: 3,340 kg, Göteneds K25-25 A1200 Kombi – Metalworking Machine For sale is a robust and reliable combination machine from the Swedish manufacturer Göteneds. This machine is ideally suited for industrial metalworking applications, distinguished by its sturdy construction and precise operation. Technical Data: Manufacturer: Göteneds (Sweden) Model: K25-25 A1200 Kombi Working area (SS 1312): 2550 x 25 mm Serial number: 13960 Year of manufacture: 06/1994 Weight: approx. 3,340 kg Description: The machine is designed for demanding applications, offering high stability and dependable performance in continuous operation. Its massive construction makes it particularly well-suited for precise machining processes. Condition: Used, fully operational (more detailed condition information can be added – e.g., "can be inspected under power" or "regularly serviced"). Special features: Todpfjy D A Hnex Abtsb High-quality machine made in Sweden Excellent build quality Industrial-grade design

Condition: used, machine/vehicle number: PST37, Used pasteurizer for tomato juice 400 CPMTechnical Specifications & Performance DataThis BOND four-module tunnel pasteurizer-cooler is designed for the thermal treatment and controlled cooling of tomato juice containers. Built primarily in stainless steel, the machine combines pasteurization and cooling stages on a continuous Intralox plastic mesh conveyor, providing a robust solution for industrial packaging and beverage production applications requiring extended thermal processing.Maximum production speed: For tomato juice 400 containers per minute (24.000 unit per hour) for beer 600 container per minut (36.000 unit per hour).Alternative operating condition: 300 containers per minute ( overhauled, in excellent condition )Thermal length: 27,400 mmUsable width: 3,200 mmUseful processing area: 80 m²Total internal capacity: 22,000 piecesProduct weight used for the thermal calculation: 450 gContainer format indicated: 2.0LAdvanced Automation & Control SystemsThe pasteurizer is supplied with an electrical control panel for management of the thermal treatment and conveyor process. Water tanks, recirculation pumps, heat-exchange equipment and the continuous conveyor are integrated into a coordinated operating system. The design includes recirculating-water circuits serving the pasteurization and cooling sections.Thermal performance data indicate pasteurization water at 95°C, with a cooling-tower temperature difference of 10°C. The documented recirculating-water volume is 80 m³/h, with additional pump references of 65 m³/h and 165 m³/h.Production Line Integration CapabilitiesThis tunnel pasteurizer is suitable for installation in a used bottling line or industrial packaging line where filled containers require pasteurization before downstream handling, labeling or secondary packaging. Its continuous mesh conveyor configuration supports inline product flow between upstream filling equipment and downstream cooling, inspection or packaging machinery.The machine was originally engineered for tomato juice, a product requiring longer pasteurization times and higher pasteurization temperatures than beer. The system can therefore be evaluated for beverage production and food-processing applications with comparable thermal-treatment requirements. The cooling section includes a 20 m² buffer conveyor to support controlled product discharge and line balancing.Machine Condition & Maintenance HistoryPresented as like new and fully operational, the machine is complete with the accessories required for operation. The all-stainless-steel construction supports durability and hygiene in demanding production environments, while the Intralox mesh belt provides continuous container transport through the thermal and cooling zones.Operational Performance & VersatilityAt 400 containers per minute, the maximum documented thermal cycle lasts 55 minutes. Pasteurization represents 25% of the cycle, with 14 minutes at 95°C water temperature, followed by 41 minutes of cooling using cooling-tower water. At 300 containers per minute, a revised 60-minute cycle is indic... Tsdozvl S Iopfx Abtsb

Condition: used, Year of construction: 2005, machine/vehicle number: PST36, Used APV N35 Plate pasteurizer 10246 KghTechnical Specifications & Performance DataThis plate pasteurizer is engineered for continuous high-efficiency thermal treatment in beverage and dairy processing. Manufactured by APV Products, the N35 model provides reliable heat exchange performance with a compact footprint, making it ideal for integration into a used bottling line or broader industrial packaging and beverage production setup.Manufacturer: APV ProductsModel: N35Nominal capacity: 10,246 kg/hHeat transfer surface: 54.6 m²Working pressure: 10 barWorking temperature range: 0.9 to 100 °COverall width: 1300 mmOverall height (max): 2500 mmOverall length: 2700 mm (approx. 3000 mm with control cabinet)Configuration: Plate heat exchanger pasteurizer (HTST/flash process)Previous application: Milk processingAdvanced Automation & Control SystemsThe APV N35 plate pasteurizer supports modern automation architectures for precise thermal treatment. Typical configurations include PID control of product and heating media with temperature, flow, and pressure instrumentation, as well as interlocks for safe operation. Integration with a plant PLC/HMI enables recipe management, trend logging, and alarm handling to stabilize outlet temperature and holding-time compliance. Operator safeguards and clear access points facilitate routine checks and adjustments while maintaining hygienic conditions. Quick disconnects and service-friendly plate pack design help minimize downtime during maintenance or format changes.Production Line Integration CapabilitiesDesigned for seamless integration upstream of filling and downstream of raw product reception or blending, the N35 aligns with beverage and dairy workflows in second hand and new industrial packaging environments. It pairs effectively with homogenizers, balance tanks, deaerators, and CIP systems, and can feed fillers handling PET, glass, or carton packaging in beverage production lines.Machine Condition & Maintenance HistoryThis unit is offered as a second hand plate pasteurizer formerly used in milk production. Its robust stainless-steel design and APV engineering support reliable recommissioning in a new beverage production or food-processing facility. Routine service of seals, gaskets, and instrumentation is recommended to align with site-specific quality protocols before startup.Operational Performance & VersatilityThe APV N35 delivers stable outlet temperatures and consistent holding times suitable for HTST pasteurization. The plate pack enables efficient heat recovery, optimizing energy use and reducing thermal load on utilities. The unit’s performance characteristics make it a strong fit for dairy applications such as milk, with potential adaptability to other heat-treatable liquid foods or beverages when configured with appropriate elastomers, plate patterns, and thermal profiles.Installation Requirements & Site PreparationPlan installation with the stated dimensions and allow service clearance for... Tsdpfx Abjznvfcjtob

Condition: used, Year of construction: 2004, machine/vehicle number: PST31, Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized automation for precise thermal profiles and repeatable product quality across shifts.Control panel: Central stainless steel electrical cabinet with PLC and touchscreen HMIInstrumentation: Pressure gauges, flow control, and temperature sensors for closed-loop regulationProcess analytics: Inline quality monitoring to supervise key product parameters in real timeCIP automation: Pneumatic valve islands and control heads orchestrating automated cleaning cyclesProduction Line Integration CapabilitiesDesigned to integrate seamlessly upstream of filling, this second hand thermal processing unit connects easily to existing utilities and can be paired with a used bottling line or new production line layouts.Inline/standalone: Operates as a standalone pasteurization and cooling skid or inline within a complete packaging machinery lineFormat flexibility: Suitable for multiple liquid products prior to filling in PET, glass, or other containersQuick connection: Skid piping and utility stubs facilitate fast commissioning and changeoversMachine Condition & Maintenance HistoryProfessionally maintained and presented in ready-for-operation condition, this equipment supports immediate relocation and rapid start-up for beverage production or food processing facilities.Status: Ready for immediate operationUpkeep: Well-maintained, industrial-grade components designed for continuous dutyOperational Performance & VersatilityIdeal for high-quality thermal treatment with efficient energy recovery, ensuring consistent pasteurization while protecting sensory attributes.Applications: Milk pasteurization, fruit juice processing, syrup handling, and brewery wort coolingEnergy efficiency: Regeneration section increases thermal efficiency and reduces utility loadQuality assurance: I... Todpfx Asy Ai Hljbtsb

Condition: used, Year of construction: 2004, machine/vehicle number: PST35, Used APV N35 Plate pasteurizer 10000LhTechnical Specifications & Performance DataThe APV Products N35 is a plate pasteurizer engineered for high-efficiency thermal treatment of liquid food and beverage products. Built in 2004, this second hand system offers a compact, hygienic solution for beverage production and industrial packaging processes where consistent heat transfer and reliable performance are essential. Previously operated on whey in a dairy environment, it is now dismantled and ready for integration into a used bottling line or processing plant.Manufacturer: APV ProductsModel: N35Year: 2004Type: Plate pasteurizer (plate heat exchanger design)Nominal capacity: 10,000 l/hHeat transfer surface: 56.35 m²Working pressure: 10.0 barPrevious application: Whey (dairy processing)Advanced Automation & Control SystemsThe N35 plate pasteurizer architecture supports modern automation strategies. Typical configurations include temperature control loops, flow regulation, and safety interlocks to maintain stable pasteurization temperatures and hold times. The system layout facilitates integration with common PLC/HMI platforms used in beverage production, enabling recipe control, trend logging, and alarm management. Operator-friendly interfaces allow fast start-up, monitoring, and shutdown routines, while sanitary design supports rigorous hygiene requirements.Production Line Integration CapabilitiesThis flash-style thermal unit fits upstream of filling and packaging operations across a wide range of process layouts. It can be paired with balance tanks, deaeration, homogenization, and inline filtration, and can feed fillers serving PET or glass bottling operations in a used bottling line. Its compact footprint makes it suitable for both standalone processing cells and fully integrated beverage production lines. Format changes are process-driven (flow/temperature parameters) rather than container-driven, enabling multi-product flexibility for water-based and dairy-derived liquids.Machine Condition & Maintenance HistoryThe unit was previously operating on whey in a dairy plant. It has been professionally dismantled and is ready for collection and installation at a new site. Its condition supports recommissioning after standard installation, utility connection, and validation procedures typical for second hand processing equipment.Operational Performance & VersatilityThe APV Products N35 plate pasteurizer provides efficient heat recovery and stable thermal profiles for continuous processing. The plate heat exchanger design is well-suited for clear and low-to-medium viscosity liquids found in beverage and dairy processing. It aligns with industrial packaging requirements where consistent microbiological stability, product quality, and throughput are priorities. The 10,000 l/h nominal capacity makes it a solid choice for mid-scale beverage production environments seeking reliable performance.Installation Requirements & Site PreparationSite readiness typically includes utilities for heating and cooling media, process water, and drain connection... Tedpjznvdrofx Abtjb

Condition: used, Year of construction: 2004, machine/vehicle number: AT31, Used APV N35 Plate pasteurizer 10000LhTechnical Specifications & Performance DataThe APV Products N35 is a plate pasteurizer engineered for high-efficiency thermal treatment of liquid food and beverage products. Built in 2004, this second hand system offers a compact, hygienic solution for beverage production and industrial packaging processes where consistent heat transfer and reliable performance are essential. Previously operated on whey in a dairy environment, it is now dismantled and ready for integration into a used bottling line or processing plant.Manufacturer: APV ProductsModel: N35Year: 2004Type: Plate pasteurizer (plate heat exchanger design)Nominal capacity: 10,000 l/hHeat transfer surface: 56.35 m²Working pressure: 10.0 barPrevious application: Whey (dairy processing)Advanced Automation & Control SystemsThe N35 plate pasteurizer architecture supports modern automation strategies. Typical configurations include temperature control loops, flow regulation, and safety interlocks to maintain stable pasteurization temperatures and hold times. The system layout facilitates integration with common PLC/HMI platforms used in beverage production, enabling recipe control, trend logging, and alarm management. Operator-friendly interfaces allow fast start-up, monitoring, and shutdown routines, while sanitary design supports rigorous hygiene requirements.Production Line Integration CapabilitiesThis flash-style thermal unit fits upstream of filling and packaging operations across a wide range of process layouts. It can be paired with balance tanks, deaeration, homogenization, and inline filtration, and can feed fillers serving PET or glass bottling operations in a used bottling line. Its compact footprint makes it suitable for both standalone processing cells and fully integrated beverage production lines. Format changes are process-driven (flow/temperature parameters) rather than container-driven, enabling multi-product flexibility for water-based and dairy-derived liquids.Machine Condition & Maintenance HistoryThe unit was previously operating on whey in a dairy plant. It has been professionally dismantled and is ready for collection and installation at a new site. Its condition supports recommissioning after standard installation, utility connection, and validation procedures typical for second hand processing equipment.Operational Performance & VersatilityThe APV Products N35 plate pasteurizer provides efficient heat recovery and stable thermal profiles for continuous processing. The plate heat exchanger design is well-suited for clear and low-to-medium viscosity liquids found in beverage and dairy processing. It aligns with industrial packaging requirements where consistent microbiological stability, product quality, and throughput are priorities. The 10,000 l/h nominal capacity makes it a solid choice for mid-scale beverage production environments seeking reliable performance.Installation Requirements & Site PreparationSite readiness typically includes utilities for heating and cooling media, process water, and drain connection... Todpfxjzndtbj Abtsb

Condition: used, Year of construction: 2005, machine/vehicle number: AT32, Used APV N35 Plate pasteurizer 10246 KghTechnical Specifications & Performance DataThis plate pasteurizer is engineered for continuous high-efficiency thermal treatment in beverage and dairy processing. Manufactured by APV Products, the N35 model provides reliable heat exchange performance with a compact footprint, making it ideal for integration into a used bottling line or broader industrial packaging and beverage production setup.Manufacturer: APV ProductsModel: N35Nominal capacity: 10,246 kg/hHeat transfer surface: 54.6 m²Working pressure: 10 barWorking temperature range: 0.9 to 100 °COverall width: 1300 mmOverall height (max): 2500 mmOverall length: 2700 mm (approx. 3000 mm with control cabinet)Configuration: Plate heat exchanger pasteurizer (HTST/flash process)Previous application: Milk processingAdvanced Automation & Control SystemsThe APV N35 plate pasteurizer supports modern automation architectures for precise thermal treatment. Typical configurations include PID control of product and heating media with temperature, flow, and pressure instrumentation, as well as interlocks for safe operation. Integration with a plant PLC/HMI enables recipe management, trend logging, and alarm handling to stabilize outlet temperature and holding-time compliance. Operator safeguards and clear access points facilitate routine checks and adjustments while maintaining hygienic conditions. Quick disconnects and service-friendly plate pack design help minimize downtime during maintenance or format changes.Production Line Integration CapabilitiesDesigned for seamless integration upstream of filling and downstream of raw product reception or blending, the N35 aligns with beverage and dairy workflows in second hand and new industrial packaging environments. It pairs effectively with homogenizers, balance tanks, deaerators, and CIP systems, and can feed fillers handling PET, glass, or carton packaging in beverage production lines.Machine Condition & Maintenance HistoryThis unit is offered as a second hand plate pasteurizer formerly used in milk production. Its robust stainless-steel design and APV engineering support reliable recommissioning in a new beverage production or food-processing facility. Routine service of seals, gaskets, and instrumentation is recommended to align with site-specific quality protocols before startup.Operational Performance & VersatilityThe APV N35 delivers stable outlet temperatures and consistent holding times suitable for HTST pasteurization. The plate pack enables efficient heat recovery, optimizing energy use and reducing thermal load on utilities. The unit’s performance characteristics make it a strong fit for dairy applications such as milk, with potential adaptability to other heat-treatable liquid foods or beverages when configured with appropriate elastomers, plate patterns, and thermal profiles.Installation Requirements & Site PreparationPlan installation with the stated dimensions and allow service clearance for... Todpfxjzndr Rs Abtsb

Condition: good (used), OK Supersealer Continuous Bag Sealer Fully stainless steel Complete with stainless steel belt conveyor Tsdpfx Aezbnnksbtob Adjustable temperature control Stop start controls, E stop Height adjustable sealing head Mobile on castors and lockable feet The best bag sealer on the market Price € 9,500

Condition: used, OK Supersealer Continuous Bag Sealer Stainless steel Adjustable height Adjustable temperature control for different gauge bags Mobile on castors Bag infeed from right to left The best bag sealer on the market Price € 4,950 Todpszcff Aofx Abtjb

Condition: used, OK Continuous Bag Sealer Stainless steel Adjustable temperature control for different bag gauges / micron Adjustable height mast Mobile on castors Price € 4,950 Todpfxezcg R Ts Abtjb

Condition: used, Year of construction: 2005, This RÖSLER continuous shot blasting machine, model RMBC 1.1, will be auctioned off online in our industrial auction / machine auction – J&S GmbH Automotive Technology – machinery park post-auction. Tsdpfx Abozxf Rvstsb You can find this and many other items on our platform.

Condition: excellent (used), Saxon Continuous Bag Sealer Stainless steel Adjustable temperature control Electric adjustable mast height Mobile on castors Excellent condition Tedpfxjzcrlce Abteb

Condition: good (used), functionality: fully functional, REF: MM6466 1 x OK International Group SuperSealer continuous band sealer on mobile height adjustable stand. Manufacturer - OK International Group. Tjdezudu Sopfx Abteb Model - SB-40 EU. Serial number - 218-2527-23 Speed - variable, up to 21.3 m/m. Bag material - Heat sealable materials up to 15 mils or 380 microns. Direction - Right to Left.

Condition: used, Year of construction: 2017, Overview Pilot-scale tunnel for the continuous thermal treatment of packaged products by water spray. The unit heats or cools filled containers – PET and glass bottles, jars, cans – as they travel through the tunnel on a modular conveyor belt. Heating and cooling run as separate cycles, one process per pass. Temperature is regulated by a PT-100 probe and a controller acting on a direct steam injection valve, which keeps operation simple and the set point stable. Frame, tanks and main components are built entirely in AISI 304 stainless steel. The machine was used exclusively in a pilot plant for R&D trials and never ran in full-scale industrial production. It is in excellent condition, well maintained, and already dismantled and stored. Technical details - Year of manufacture: 2017 - Treatment zone: 500 mm wide x 2,700 mm long - Conveyor belt: 500 mm wide perforated modular polypropylene mesh - Belt speed: adjustable via mechanical variator - Retention time: adjustable from 5 to 20 minutes - Throughput: approx. 500 units/h, adjustable - Overall dimensions: approx. 2,870 x 1,000 x 2,250 mm (L x W x H) - Material: AISI 304 stainless steel - Electrical supply: 3 x 400 V + N + PE, 50 Hz - Total installed power: 1.7 kW (recirculation pump 1.5 kW, conveyor drive 0.18 kW) - Steam connection: DN 15 at 7.5 bar - Water connection: 1" at 3 bar - Compressed air connection: 1/4" at 6 bar - Vapour extraction: two Ø 154 mm chimney outlets Equipment Tedpfx Abozxnu Djteb - Spray tunnel with 12 stainless steel full-cone nozzles - Lower collection tray and tank with float level valve and overflow pipe - Stainless steel centrifugal recirculation pump - Automatic temperature control via PT-100 probe and direct steam injection valve - Vapour capture hoods at infeed and outfeed - Tank manhole, 185 x 235 mm - Base frame to set the machine to line working height Condition and availability - Used only for R&D trials in a pilot plant, never in industrial production - Excellent condition, well maintained - Already dismantled and stored - Can be inspected on site; loading by the seller possible - Immediately available - Location: Spain

Condition: used, Year of construction: 1986, functionality: limited functionality, We offer a continuous spray booth – Gutmann RZ – 1252. Year of manufacture: 1983 Inlet/outlet dimensions: 1200 x 350 mm (w x h) Turbines: 4 x 7.5 kW Electrical control panel, new in 2024, including frequency converters. Infeed conveyor: approx. 9000 mm Todpfx Aozl Ryiebteb Outfeed conveyor: approx. 9000 mm Filtration unit - Bartling Year of manufacture: 1996 Capacity: 6000 m3/h Motor power: 5.5 kW The machine is functional and still in operation. The stated price is for the complete machine + control panel + filtration + conveyors.

Condition: excellent (used), Continuous Sterilizer / Cooker-Cooler FMC-JBT STERILMATIC – 1 kg Format Continuous sterilizer FMC-JBT STERILMATIC (Cooker-Cooler), designed for the continuous thermal treatment of packaged food products, automating the sterilization and cooling stages within a high-production industrial line. This type of system is especially designed for canning plants that need to replace batch processing with a continuous flow of packages, allowing for the constant input of product, its thermal treatment for a controlled time, and subsequent cooling before continuing to the next stages of the line. Equipment configured for an approximate 1 kg format. MAIN FEATURES -Manufacturer: FMC / JBT -Series: STERILMATIC -Type: Continuous sterilizer / Cooker-Cooler -Installed format: 1 kg -Continuous thermal treatment of packages -Automatic sterilization and cooling process -Continuous product transport -Control of dwell time during the process -Industrial thermal circulation system -Integrated treatment sections -Piping, valve, and process distribution system -Integrated fans / circulation systems -Robust industrial construction -Designed for continuous operation -Especially suitable for high-capacity canning lines PROCESS The FMC-JBT STERILMATIC is designed to perform the thermal treatment of packages as they continuously move through the equipment. The previously filled and sealed packages are automatically introduced into the system, where they remain for a controlled process time and are subjected to the established thermal conditions to achieve the required treatment. Subsequently, the packages move to the cooling stage, progressively reducing their temperature before being discharged and transferred to the next production operations. The continuous system avoids the repetitive loading and unloading operations typical of conventional batch autoclaves and is particularly interesting for lines with large production volumes. APPLICATIONS Especially suitable for canning industries and manufacturers of high-production canned foods that require a continuous thermal process. It can be integrated into production lines for vegetables, legumes, tomato products, fish, meat, pet food, ready meals, and other packaged foods, always in accordance with the configured format and thermal process. The combination of FMC-JBT STERILMATIC technology, continuous sterilization, and Cooker-Cooler system provides an industrial solution for large-capacity canning lines. Machine available for inspection. Tedpfx Abezxcb Ejtjb Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: ready for operation (used), functionality: unexamined, Manufacturer Reckermann Milling Machines GmbH, Solingen Model Kombi 1000 Year of Construction 1990 Professional Sales Description for Machine Seekers Reckermann Kombi 1000 Universal Knee-Type Milling Machine | Year of Construction 1990 | 3-Axis Digital Readout | SK40 For sale is a high-quality universal knee-type milling machine, the Reckermann Kombi 1000, built to robust German industrial standards. This machine is ideally suited for tool and mold making, mechanical engineering, training workshops, as well as repair and maintenance shops. Thanks to its stable cast iron construction, horizontal and vertical milling capabilities, and the retrofitted 3-axis digital readout, it offers high precision and versatile applications. The well-maintained overall condition and the year of construction, 1990, make this machine particularly attractive for companies looking for a durable conventional milling machine. Equipment Manufacturer: Reckermann Type: Kombi 1000 Year of Construction: 1990 Universal knee-type milling machine Horizontal and vertical milling capabilities 3-axis digital readout (DRO) Automatic feeds Rapid traverse in all axes Coolant system Central lubrication Robust gray cast iron construction German quality machine Technical Data Feature | Value Todpeziuc Asfx Abtsb Table size | 1,370 × 400 mm Travel X | 1,000 mm Travel Y | 350–390 mm Travel Z | 430–450 mm Tool holder | SK40 Spindle speed | 48–2,100 rpm Gear stages | 16 Feed | 10–1,000 mm/min Rapid traverse X/Y | 5,000 mm/min Rapid traverse Z | 2,000 mm/min Main motor | approx. 7.5 kW Max. workpiece weight | 500 kg Machine weight | approx. 3,800–4,000 kg Condition Used Very well-maintained overall condition Retrofitted with digital readout Coolant system included Sold as pictured Inspection and functional testing possible by arrangement Application areas Toolmaking Mechanical engineering Mold making Jig and fixture construction Training workshops Repair and maintenance businesses Single and small series production

Condition: excellent (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, - Used continuous processing system (belt grinder) - The processing trough needs to be replaced. Tedpfozqunzjx Abteb

Condition: used, mileage: 2,72,115 km, power: 62 kW (84.30 HP), first registration: 04/2018, fuel type: diesel, next inspection (TÜV): 07/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * 9,400 EUR net * Volkswagen T6 Kombi 2.0 Tdi L1H1, 9 seats, air conditioning, sliding door, Euro 6 * Seats: 9 (3+3+3) * 5-speed transmission * Front airbags * Armrest * Electric windows * Electric mirrors * Central locking * Steel rims * Isofix * Air conditioning * ABS * ASR * Radio/CD * Daytime running lights * Start/Stop system * Tire pressure monitoring * Sliding door on the right * Wheelbase: 300 cm * Unladen weight: 1738 kg * Permissible total weight: 3000 kg * Passenger car registration * Vehicle no. 58 Timing belt replaced at: 233,000 km Dual-mass flywheel makes noise. OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment...) CONTACT INFORMATION Phone: WhatsApp Email: Transit plates and customs license plates (export number) available from us. Errors, typos and prior sale are subject to change. Technical specifications and equipment features must be checked separately. The condition as per the contract is only the one that is inspected on site at the time of purchase and confirmed in writing. Please make an appointment. Tjdpfeyy T Nxex Abtjb

Condition: used, Year of construction: 2009, operating hours: 6,164 h, Doppstadt IDC000123 - manufacturer: Doppsttadt Todpfx Asvy S Dpobtjb - model: DZ 750 Kombi - year of production: 2009 - gross vehicle weight: 46 000 kg - working hours: 6145