Used Copeland Qr 1 2M1 - Tfdn-551 for sale (77,985)

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor, cooling unit, hermetic compressor Pjdpfx Aoyk Tpleggjpw -Manufacturer: Copeland, Compressor Refrigeration compressor type QR 1 2M1 - TFDN-551 -Voltage: 380-420V / 50 Hz -Technical data: see photo of the nameplate -Number: 4x compressor available -Price: per piece -Dimensions: 340/330/H480 mm -Weight: 70 kg/unit

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Ppsdpfx Agjyga Utogow Sale as shown in the pictures.

Condition: used, Compressed air tank, pressure vessel, pressure tank, compressed air vessel, pressure vessel, compressor tank Podpfxed Atx Ee Aggspw -Content: 11.5 ltr -permissible operating pressure: 17 bar -Dimensions: 270/250/H480 mm -Weight: 8 kg

Condition: good (used), Refrigeration compressor, refrigeration machine, cooling compressor, refrigeration unit, cooling compressor, compressor, motor compressor, dividing hood compressor, dividing hood compressor, cooling unit, hermetic compressor -Manufacturer: Copeland, Compressor Refrigeration compressor type ZR11M3-TWD-561 -Voltage: 380-420V / 50 Hz -Technical data: see photo of the nameplate -Number: 4x compressor available -Price: per piece -Dimensions: 380/330/H550 mm Ppjdpfx Aoyk Tg Dsggew -Weight: 91 kg/unit

Condition: ready for operation (used), Compressor COPELAND Type: D8DH1-500X-BWM/D Volume: 151 m3/h Ppodpfx Asiba Rdeggow Cooling capacity: 103 kW at -5°C/40°C 85 kW at -10°C/40°C, 44 kW at -25°C/40°C Refrigerant: R404A Pieces in stock: 6 Weight: 350 kg Reference number: S 117 Condition: Used in good condition We have many other refrigeration devices. Chillers, compressors, coolers, condensers, chillers, cold rooms, refrigeration and gastronomic furniture as well as machines and devices for restaurants and meat processing. See our other auctions or call us, not everything is machineseeker.

Condition: used, Used Copeland ZR19M3E-TWD-561 scroll compressor on Freon with a sight glass. The compressor has a displacement of 42,8 m³/h. Ppodpfx Agerlk Amogsw

Condition: good (used), Cutting machine EBA 551-06, Item no. L1121 Podpfx Agsx Rclksgjpw

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 5511141, cutting width (max.): 550 mm, Cutting machine EBA 551-06 LT, working width 55 cm, with light barriers, air table, program control, rear table cover, year of manufacture 2011, machine number 5511141, in good condition, immediately available. Psdpfxozkcglo Aggspw If you are interested, we will be happy to provide you with information about other machines in our inventory. You are cordially invited to inspect the machine at our facility, subject to prior appointment.

Condition: new, Year of construction: 2025, Walk-behind Scrubber Dryer Cleancraft Pjdpfx Agoxw N Rwegspw Model: SSM 551 Battery-powered Scrubber Dryer Item number: 7202060 Brand: Cleancraft DESCRIPTION Designed for high productivity, low operating costs, and very simple operation Polypropylene disc brush with 0.6 mm bristles included Efficient dirty water extraction: surface is immediately dry and safe after a single pass Adjustable dosing of cleaning solution Automatic squeegee release protects against damage in the event of accidental impact HEPA filter retains fine dust from the suctioned air, preventing release into the environment Automatic water and brush stop when the machine is not in use Mechanical operation of brush and squeegee via levers Configurable with various cleaning brushes and pads TECHNICAL DATA General Information Working width: 508 mm Theoretical productivity: 1,880 m²/h Speed range: 0 - 4 km/h Maximum incline: 2% Vibration exposure value: 0.56 m/s² Dimensions and Weights Length (product) approx.: 1,225 mm Width/Depth (product) approx.: 597 mm Height (product) approx.: 1,030 mm Net weight approx.: 81 kg Brushes Brush diameter: 508 mm Brush speed: 140 rpm Brush pressure: 21 kg Surface pressure brushes: 150 g/cm² Electrical Data Rated voltage: 24 V Total power: 922 W Brush motor power: 500 W Vacuum pump power: 422 W Power supply: Battery Battery type: 2 x 12 V 75 Ah Maximum battery runtime: 150 min Battery charging time: 5 h Protection class: IPX3 Sound Emission Sound pressure level Lp: 64.2 dB(A) Sound power level Lw: 78.8 dB(A) Vacuum System Working width suction: 703 mm Vacuum: 180 mbar Product Information EU 2023/2854 Type of generated data: Usage data Format of generated data: Common machine-readable formats e.g. JSON Data volume: Up to 5 MB Continuous real-time data generation: Yes SCOPE OF DELIVERY 2 x Gel Batteries 12V 75Ah Battery charger Disc brush PP 0.6 mm EQUIPMENT Equipment 2-tank system Fresh water tank: 34 l Dirty water tank: 36 l Dirty water extraction: can be switched off Squeegee: rear-mounted Automatic water and brush stop Battery charge indicator Hour meter Location: 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 020849GA07, bar length: 3,200 mm, bar diameter (min.): 5 mm, bar diameter (max.): 51 mm, Very good IEMCA Boss 551E Bar feeder. The Boss is the bar feeder for long bars which has been sold the most in the world with more than 30,000 installed units. The Boss 551 Easy is an automatic bar feeder suitable for lathes with fixed and mobile headstock. Round bars: 5 – 51 mm Hexagonal bars: 5 – 44 mm Square bars 5 - 36 mm Ppodpezlh I Dsfx Aggsw Bar length: 3200 mm Max. spindle diameter: 65 mm Remnant length 400 mm Bar changeover time 31 sec. (for bar length 3200 mm) Loader weight: 830 kg Year: 2008

Condition: new, “Partially unpacked for photography – unused item from a warehouse clearance.” Ball screw drive Z-axis formerly SAP 13000024209 13:40 551/11 00000 STEINMEYER Ppjdpezh Auwofx Aggow

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 4000/471 n/n1 -Power: 0.19 KW -Construction. B5 angle -Diameter shaft: 11 mm -Dimensions: 270/200/H130 mm -Weight: 5.5 kg Podpfsd N Ddgex Aggjpw

Condition: used, Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: you can rebate, groove and profile -with keying: from 2 sides each -Milling unit: swiveling -1x engines Perske -Power kW Psdpfjb R Hkpsx Aggopw -Voltage: volts -Frequency: Hz -Speed: rpm -Other engines with other services in stock for an additional charge -Dimensions: 650/520/H600 mm -Weight: 80 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Psdpsiqhhvjfx Aggspw -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Condition: good (used), Year of construction: 2007, scrubber-dryer, floor cleaning machine, mop -Scrubber-dryer with drive Ppjdeb A Hg Eopfx Aggsw -Working width: 850 mm -Practical area coverage: 2860 m²/h -Charger -with drive -Special suction foot guarantees maximum suction power at low cost.

Condition: used, functionality: fully functional, Year of construction: 2009, load capacity: 7,500 kg, construction height: 1,200 mm, empty load weight: 1,620 kg, Paper roll clamp Load centre of gravity: 650 ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: very good Pedpfxju Dy Hks Aggopw Description: Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless

Condition: new, Indramat TRK6-4U-380 / 100-G1 / 551 Pulse-thyroid control amplifier SN:219444-004991, unused, 100% functional, scope of delivery as per photos Pjdpfx Agstyr A Aegopw

Condition: excellent (used), Year of construction: 2010, Format (cm): 55 Ppedpsxcaibsfx Aggsw Equipment / Additional information: Side tables, safety barriers, air table, 1xreserve knife

Condition: new, functionality: fully functional, machine/vehicle number: NEW-19, empty load weight: 265 kg, maximum load weight: 1,085 kg, overall weight: 1,350 kg, axle configuration: 1 axle, loading space length: 2,550 mm, loading space width: 1,330 mm, loading space height: 430 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS CW 255 133 1350 NEW VEHICLE Internal dimensions: 255cm x 133cm Side panel height incl. railing: 43cm Loading area height: 51cm Total weight: 1350Kg Payload: 1085Kg Braked single-axle low-loader Overrun brake and parking brake by AL-KO 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame 15mm thick, robust screen-printed plywood side panels Steel railing Rear side panel foldable and removable with tensioning fastener 15mm thick, non-slip and robust screen-printed plywood floor Drawbar wheel 6 lashing eyes with 400Kg tensile force 14" reinforced C tires 2x U-shaped chock M+S tires Net/rope hook on the frame 13-pin connector Side marker lights at the front Rear lamps with reversing light and triangular reflector OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Ramps -SARIS aluminum rims -Complete LED lighting -Anti-theft device -Fine or coarse mesh net -H-frame -Leaf grid in various heights, also closed -Flat cover with or without bow -High cover 150cm or 180cm -Rear supports Further accessories available on request! Plus shipping to Gera and vehicle registration document 150 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Ppedpfxjghpbvj Aggew Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. Hnobqeghpbyeupd Nfoh In addition, we have a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: new, power: 405 kW (550.65 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, brakes: retarder, color: silver, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Full equipment details available on request. - Leading axle, electro-hydraulically steered - Rear air suspension, tridem, 2 driven axles - Globetrotter XL safety cab (FH) - Wheelbase: 3,900 mm - Euro 6 emissions standard, with SCR, particulate filter, and exhaust gas recirculation - Diesel engine 12.8 l, 551 hp / 405 kW, 2,652 Nm - Engine brake exhaust pressure regulator (incl. engine control for I-Shift) - I-Shift AT2612, automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm - Two additional crawler gears, slow & ultra-slow - Two additional reverse crawler gears - Liftable axle - Drive axle RTH2610B, tandem axle hub reduction, 4 planetary gears - Longitudinal and cross differential locks - Drive axle ratio 3.46 : 1 - Automatic climate control with sun sensor, fog sensor, air quality sensor, and activated carbon filter - Front axle air suspension - Rear air suspension - AdBlue tank, usable volume 90 liters, height 710 mm - Front axle tires 385/55R22.5 - Rear axle tires 315/70R22.5 - Rear-lift axle tires 385/55R22.5 - Transmission/I-Shift control via unit at driver's seat - I-Shift drive modes: Standard, Performance, and Economy - PTO PTER-DIN, engine mounted, prepared for pump according to DIN 5462 - Electronic Stability Program (ESP) - Radio: AM/FM and DAB/DAB+ (analog & digital) - Reversing surveillance/camera - Second driver information display, 9-inch color touch display - Robust leather trim: leather seat (beige/raven) with matching grey vinyl interior Pjdeyhkqhopfx Aggepw - Comfort driver's seat, air-suspended, heated, seat belt integrated in seat, Millennium Silver metallic - LED main headlights with adaptive high beam - LED daytime running lights, V-shaped LED fog lights, front - Heavy-duty fifth wheel Jost JSK 38-C, king pin 3.5 inch (90 mm) - 1. Custom feature: I PARK COOL stationary air conditioning - 2. Custom feature: Ride height control switch in cab - 3. Custom feature: Reinforced spring actuators - 4. Custom feature: PCA 20025 custom fuel tank 860 L behind cab - 5. Custom feature: AA ratio 3.33, CAPQ-25000817-01 - Conversion kit for 2 inch king pin - heavy haulage with GCW greater than 100 tonnes - additional side with vertical exhaust for EASP1/EASP5 - CB radio next to TCO with hands-free system, Stabo/Albrecht - Compressed air gun mounted on left of driver's seat - Jumbo - Globetrotter roof sign lighting - 7-liter water tank in side storage compartment - NATO socket on bar above switch - Lightfix bar with 4 LED headlights, including 2 x rotating beacons

Condition: excellent (used), Year of construction: 2020, CLOOS QIROX Robotic Welding Line – Dual Gantry System – 2020 Ppjdpfx Ajyvaahoggsw General Description For sale: high-performance robotic welding line based on the renowned CLOOS QIROX system, designed for automated welding of medium to large steel structures. The system consists of two gantry-mounted welding robots working on a shared linear axis, combined with rotary positioners, allowing efficient welding of long components and complex assemblies. This is a modern (2020), industrial-grade solution suitable for heavy fabrication, steel structures, frames, and serial production. Key Equipment & Configuration Robots • Model: CLOOS QIROX QRC 410 • Year: 2020 • Type: 6-axis articulated robot • Payload: 10 kg (wrist capacity) • Repeatability: ±0.1 mm • Working range: approx. Ø 5000 mm • Welding processes: MIG/MAG, TIG, optional cutting & sensor integration ✔ High dynamics and precision ✔ Modular design for flexible applications ✔ Suitable for complex welding paths and long seams Controllers • Model: QIROX Controller QC2.02 / QRC 410 • Industrial PC-based control system • Simultaneous control of robot + external axes • Power supply: 3x 400V / 32A 3x 400V / 19A • Frequency: 50/60 Hz • Power: up to 21.5 kVA ✔ Robust cabinet design ✔ Optimized human-machine interface ✔ High path accuracy and process stability Positioners (Rotary Tables) • Model: CLOOS QR-CTU-100-09 2.0 • Load capacity: 10,000 N (≈1,000 kg) – vertical position 20,000 N (≈2,000 kg) – horizontal position • Torque: up to 1600 Nm • Tilting moment: 8800 Nm • Drive power: 4.5 kW ✔ Programmable axes synchronized with robot ✔ Ideal for complex geometries ✔ Enables optimal welding position and accessibility System Layout • Dual gantry system (2 robots on linear track) • Long working area for large structures • Integrated working tables for long parts • Suitable for: – frames – steel constructions – long welded assemblies Typical advantages of this configuration: • Extended working range via linear axis • Possibility of simultaneous welding operations • High productivity and reduced cycle time Advantages ✔ High productivity and repeatability ✔ Excellent weld quality ✔ Flexible configuration (different parts & sizes) ✔ Proven CLOOS industrial reliability ✔ Suitable for serial and custom production Typical Applications • Steel structures • Machine frames • Automotive components • Construction elements • Heavy fabrication Technical Highlights (Summary) • Robots: 2x QIROX QRC 410 • Axes: 6-axis robots + external axes • Control: QIROX QC2.02 • Positioners: up to 2,000 kg capacity • Power: 400V / 50–60 Hz • Year: 2020 • System type: gantry welding line Condition & Availability • Condition: Very good, fully operational • Available for inspection under power • Can be dismantled and shipped worldwide

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 551 PORTATİF KOPYA FREZE MAKİNESİ, functionality: fully functional, - Used for lock handle, hinge, espagnolette slots and grooving in desired size on aluminum and plastic profiles - Copy assembly suitable for your operation Psdsrcm D Djpfx Aggepw - Various grooving features independent of the copy assembly with the help of the stop OPTIONS - Lower cabinet system - Pneumatic system

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 551 S ALUMİNYUM FREZE MAKİNESİ, • Used for machining lock handle positions, hinge and espagnolettes slots, and custom-sized channels on aluminium and plastic profiles • Copying fixture suitable for the required operation • Independent channel milling feature via guide stop, in addition to copying fixture Pjdpeydu Hrefx Aggepw • Powerful 1.1 kWh / 1.5 HP motor • 13,500 rpm milling motor speed • 220 / 230 VOLT, 50/60 HERTZ • 5 mm milling cutter supplied as standard OPTIONS • Base cabinet system • Pneumatic system

Condition: used, Year of construction: 2000, cutting width 55 cm feeding depth 57 cm feeding high max. 9,5 cm Psdpfxey Tpmte Aggspw

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 5033977, cutting width (max.): 5,500 mm, insertion depth: 5,700 mm, Equipment: compressor, High-performance and accurate hydraulic cutter - for small and medium-sized printing houses, bookbinders, and digital printers. Equipped with programmable control, designed for small-volume orders that change frequently. Control: Option to save programs in memory Data entry via decimal keyboard Electronic digital display with 1/10 mm accuracy Electronic handwheel with gradual adjustment of rear stop speed Machine diagnostics with error indicator on display Program start with "start" button switching between mm and inches hydraulic drive of the cutter and pressure holder Photocells side tables Ppodpfx Asxm Tu Sjggew air table foot pedal for pressure measurement safety guards on the rear table