Used Cross Hatch Cutter for sale (8,699)

Condition: good (used), Thickness gauge, coating thickness gauge, Cross Hatch Cutter -Manufacturer: Elcometer, cross-cut device with case -Type: Elcometer 107 Guedpfx Alor H Nlhjfeb -Material: stainless steel / aluminum -Accessories: see photos -Dimensions: 300/270/H75mm -Weight: 1.1 kg

Condition: used, Number of milling spindles 4 St. fence ja ja /nein workpiece ja Stegherr KSF 2/4 - The modern, practical machine concept for efficient crossbar production. Years of expertise and a sophisticated, thousands-proven machine guarantee precision at an optimal price-performance ratio. Particular emphasis is placed on the machine's ease of use and flexibility. KSF 2/4 upgrade: Milling units A1, A2, A3 as with KSF 2. + Milling unit A4, machining of the counterpart without turning, view side absolutely tear-out-free. Gusdpfx Ajy Dvm Ielfsb Digital fence (moving carriage, reliable and quick readability to 1/10 mm). foot switch With tools in the machine as shown in the pictures plus 2 additional profile cutters, see pictures. Further accessories are shown in the pictures. Compressed air pressure: p = 6 bar The following work was carried out on the machine: - Maintenance unit replaced - Pneumatic hoses replaced - Plexiglas cover and gas spring for opening/closing the cover replaced - functional check (Manufacturer's technical data - no guarantee!)

Condition: new, Number of milling spindles 2 St. fence 1 ja workpiece ja Cross rung milling machine STEGHERR TYPE KSF-mini including standard stop with 2 sliding stops, without tools With the KSF-mini, all of those that occur in practice can be used Crossbar connections can be made quickly and precisely. The Precise execution is achieved by having the workpiece in one Clamping is machined on three sides. The tool is driven by two three-phase motors; the tension of the Workpieces pneumatically. The profile cutter is designed for the web width. The saw blades that... If you carry out flattening, spacer rings are used to match the dimensions of the Profile milling cutter adjustable. The swivel device is free of play. The machine is designed for a maximum workpiece cross section of 56 x 46mm. Voltage Europe: 400V(+/-10%)/3Ph/50Hz, USA: 440V(+/-10%)/3Ph/60Hz Other voltages on request. Operating instructions in German or English. Table base EUR 1.070.00 Foot switch EUR 900.00 Adjustment optics EUR 130.00 Profile milling cutter in HM-Wepla version, available for selection: Ø 5,7,9,11,13 mm. Price per piece EUR 650.00 1 set of replacement insert knives for profile milling cutters (=10 pieces) EUR 190.00 HM saw blade, price EUR 170.00 per piece Gedpfx Ajyrtzqolfoub (For a web of e.g. 10 mm, 3 saw blades are required) Setting the machine to the tools provided by the customer, price EUR 700.00 per individual tool Packaging in a crate (suitable for land transport) EUR 650.00 Packaging shrink-wrapped on a pallet (only within Europe, not for air freight) EUR 340.00 Pricing ex works, unpacked, uninsured, for delivery within Germany plus the VAT valid at the time of delivery. (all technical information according to the manufacturer, without guarantee!)

Year of construction: 2016, condition: refurbished (used), Fully variable air/belt cross cutter / sheeter with camera register mark for paper and film production Gsdpfxsgqpv Dj Alfjub min. format length: 100mm max. format length: 3500mm max. web width: 100mm max. web width: 2500mm max. mech. speed: 700m/min year of construction: 2015 variable in- / offline air and belt cross cutter for paper and film, with speeds up to 700m/min a.o. also with special options like multiple stacking stations, antistatic equipment, non-contact product transport and many more. For paper and film mills/manufacturers, paper and film converters, inline behind the paper or film machine or offline in the finishing/processing department For label printers (e.g. beverage labels etc.) inline behind the printing machine or offline as part of a line (also embossing etc. possible) For packaging printers (e.g. sheetfed offset) as an in-house sheeting unit for converting the less expensive reel stock - also ideal as a replacement for your Mabeg RS rollcutter or Bielomatik CutStar systems If you have any questions, please do not hesitate to contact us! Your specialists for cross cutting / sheeting technology !

Condition: as good as new (ex-display), Year of construction: 2019, 380 V Pneumatic Guodpfx Aetgkwfelfeb

Condition: used, Year of construction: 2006, operating hours: 100 h, functionality: fully functional, Profi Industrial Cutting System (Longitudinal/Cross) – Grossmann – ONLY 100 operating hours! Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from quality manufacturer Grossmann Maschinenbau. The system has a total runtime of no more than 100 operating hours. It is therefore in an almost mint technical condition and shows hardly any signs of wear on the mechanical components. Originally designed for cutting chip mats, this machine’s robust construction and versatile PLC control make it suitable for a wide range of materials (e.g. rubber, cork, fleece, composites, films, textiles, etc.). Technical highlights & features: Condition: Nearly new (max. 100 operating hours). Format: Maximum cut length 2,500 mm x maximum working width 1,200 mm. Complete line: Includes professional unwinder and winder for fully automatic material flow from roll to roll or roll to format. PLC control: Professionally programmed, with a choice between manual and automatic operation. Material handling: Automatic gripper feed positions material precisely in the end position, with integrated edge removal system for perfectly clean edges. Operation: Intuitive control via display, foot switch, and optical/acoustic production completion indicators (traffic light/horn). Gsdpfx Aljylxmfjfoub Precision: Integrated laser for exact material alignment. Safety: Fully enclosed design and modern safety monitoring. Versatility: This machine is a true all-rounder for any rolled material that needs to be cut to precise sheet sizes or strips. Its stable construction with a high-quality aluminum profile system ensures maximum rigidity. Complete documentation available, including process protocol, wiring diagrams, and technical drawings. The machine can be inspected and tested under power by appointment. For exact technical details and questions about fields of application, please feel free to contact me personally. Contact: Phone: 05427 9423 20

Year of construction: 2013, condition: good (used), LINK LABEL ISH 330 Cross Cutter → Year of manufacture: 2013 This machine is designed for precise cross-cutting of both printed and unprinted materials and is particularly well-suited for short production runs, variable cut lengths, and processing transparent substrates. Technical Specifications Unwinding System → Integrated unwind unit → Loop control for stable web tension → Roll end sensor included Maximum Roll Diameter → 550 mm Maximum Web Width → 330 mm Cutting Length → Variable, programmable via touch screen → Skip function included → Intermediate cut programmable from 0.10 mm to 50.00 mm Maximum Speed → Up to 500 cuts per minute Drive and Control → Computer-controlled drive system → Touch screen operation Material Handling → Suitable for transparent materials → Suitable for printed and unprinted materials → Optical sensor for register control Delivery System → Delivery conveyor for shingled output → Pulse separation system for reliable product separation Infeed and Web Control → Pneumatic pressure rollers → Web tension control via integrated vacuum system → Vacuum pump included Electrical and Air Requirements Power Supply → 220 V → 10 A Compressed Air → Minimum 6 bar Dimensions and Weight Overall Dimensions (L x W x H) Gujdjycv Eyopfx Alfeb → 1,980 x 900 x 1,038 mm Machine Weight → Approx. 250 kg Why This Machine? The ISH 330 Cross Cutter stands out with its high cutting precision, flexible length programming, and superior web control. Its optical register system and vacuum-controlled web tension ensure reliable, consistent results even at high speeds and when working with challenging substrates such as transparent films. With its compact footprint and intuitive touch screen operation, it is the ideal choice for efficient finishing in modern label production environments.

Condition: ready for operation (used), Cross Bar Milling Machine Manufacturer: Stegherr Model: KSF Suitable for milling cross bar joints, e.g., in windows, doors, and furniture Equipped with 3 milling units Guedpfx Aow Imhcjlfjb An upper and a lower milling unit simultaneously mill the two mitre-like cut-outs A third unit simultaneously performs the flattening The machine table is moved pneumatically-hydraulically. The forward and return speeds are adjustable. With foot switch 2 motors, each approx. 2.2 kW Total connected load approx. 4.5 kW Compressed air 6 bar Voltage 380 V 50 Hz Extraction connection diameter 180 mm Incl. 3 milling tools

Condition: good (used), Please refer to the images for all technical specifications. Transport and loading can be arranged throughout Europe for an additional charge upon request. Prices are subject to VAT. Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Guedpfx Aloy H Iigofjb Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MUCH MORE. Do you need a high-quality yet affordable machine for your production? Or are you looking to sell yours? For further information or contact options, please reach us via the contact form.

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Guodpfx Aleu Tg I Defeb Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: refurbished (used), Year of construction: 2010, functionality: limited functionality, Alpina Swopper 330 litre Bowl Cutter Year 2010 Motor power 141 Kw Multispeed knife and bowl Noise cover Power up knife lid 6 x knives Unloader disc Tote bin loader Gjdpfxoykt Sgj Alfjub Currently being refurbished New knife shaft bearings fitted Hydraulic rams being checked and new seals fitted Main motor being rewired, machine stripped out to clean. 6 x knife speeds with 2 x reverse knife speeds 4 x bowl speeds With machine manual and drawings

Condition: excellent (used), Year of construction: 2019, The machine is in very good condition – the latest model is designed for poultry slaughter and initial processing, ensuring a capacity of 13,500 birds per hour. Technical Specification Model: 20x6" Capacity: 13,500 birds/hour Live weight: 1.2-4.0 kg Number of units: 20 Gujdjwdic Aopfx Alfjb Shackle pitch: 6" Length (X): 2508 mm Height (Y): 2985 mm Width (Z1): 1693 mm Iebttsv Au Nge Shdfoar Width (Z2): 3092 mm Width (Z3): 2580 mm Weight: 1535 kg Water consumption: 1.0 m³/h Water connection: High pressure: 40 bar; Medium pressure: 8 bar; Low pressure: 2-3 bar Water inlet: 3/8" BSP Drain connection: DN100 BSP

Condition: used, KRAMER + GREBE CUTTER 65 LITERS. 380V Gedjy Hf Ugopfx Alfsub

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Accuracy of vertical line at 3 m +-0.75 mm Gjdpfsd Ecncex Alfeub Number of laser lines: 2 Weight: 485 g

Year of construction: 2019, condition: like new (used), functionality: fully functional, For sale is a BOXMAKER® carton production machine by Horstmann Maschinenbau, designed for the flexible manufacturing of custom shipping cartons—precisely in the required size and quantity. Your advantages at a glance: • Produce cartons "just in time"—individually controlled via touch panel Guedpoylw Nljfx Alfeb • Reduction of storage costs and packing materials • Lower shipping costs thanks to perfectly fitting packaging • Fewer transport damages, increased customer satisfaction • Processes continuous corrugated board or sheet stock; complex cuts are possible Ideal for industry, wholesale, fulfillment, and e-commerce operations looking to optimize packaging processes for greater efficiency, sustainability, and independence.

Condition: new, PRICE: 5000 EUR Pillar lift for cutter cart Made of stainless steel Gusdpfxsvtz U Re Alfeb Lifting weight: 250 kg Dimensions: 1520x1300x2740mm Electrical power: 1.1kW Voltage: 380V 50Hz

Condition: new, PRICE: 5000 EUR Mobile lift for cutter cart Made of stainless steel Gujdpsvtzzkofx Alfeb Lifting weight: 200 kg Dimensions: 1160x800x2900mm Electrical power: 0.75kW Voltage: 220V 50Hz

Condition: new, PRICE: 320 EUR Cutter cart Gjdpfx Aevt Aicolfjub Made of stainless steel Dimensions: 600x600x500mm Volume: 200 liters

Condition: good (used), Good condition. Warranty & Delivery Component: complete delivery car The machine is of superior quality, recommended for all types of workshops as well as for factories with medium and large productions. When purchasing this machine, you have a 6-month warranty and a 5-year post-warranty. Worldwide Delivery We always have more than 1000 machines in stock so that each customer can choose from several options. 
With over 20 years of experience in the textile industry and over 10,000 satisfied customers, we make sure that your plans become successful businesses! Gjdpfxolmnzqs Alfjub

Condition: good (used), Double side corner cutter Very good condition. This is a professional, production device for rounding corners. Solid construction ensures precision of operation. Two trimming heads. Interchangeable knives. Adjustable margins. Controlled by foot pedal. One set of 8mm knives included Stack height approx. 80mm Weight 100kg Efficiency 20 cycles/min Gujdpjwungzefx Alfjb Compressed air supply.

Condition: new, functionality: fully functional, Year of construction: 2023, laser power: 3,000 W, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, total length: 6,000 mm, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, NS-6022HG Tube laser cutting machine 3kw 3 Chuck Professional Pipe Laser Cutting Machine with automatic loading system with 6m automatic unloading with Chinese 3D bevel head-BLT tubes T CE Anti-radiation glass protective guards AVR KIT OF NOZZLE, LENS ETC(SPCS FOR EACH) Series: NS-HG Gjdpswu Rm Rsfx Alfsub Type: Three chucks Groove function: Standard Power: 3KW Maximum pipe length: 7000mm Round pipe: Φ15mm-Φ220mm Square pipe: 15mm*15mm~150mm*150mm Rectangular pipe: 30*20mm~160*80mm Oval tube/flatoval tube: Short axis≥15mm, long axis ≤ 210mm Channel steel: Max20# I-beam: Max18# H steel: Max175*90mm Maximum acceleration: 1.0G Chuck maximum speed: 100r/min Machine weight: 10t Power supply specification: 380VAC, 50Hz Standard: Support servo (groove), dust prevention (Y axis), dust prevention (X axis), dust prevention (Z axis), safety fence (light curtain), zero tail material, cutting area dust removal, rear card hollow dust removal

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Gedpewz Ufwofx Alfsub Type: Two chucks

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated Guodpov D Uhfefx Alfeb ≤2m workpieces are unloaded through servo flaps

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, 3015H high-speed laser sheet metal machine High speed enables efficient processing 1.5G acceleration 50%–100% increase in thin sheet processing efficiency 7Hz low-pass filtering Enables high-speed, high-precision cutting of complex shapes Over 50% improvement in fine processing efficiency High speed and high efficiency drive high productivity Our high-speed cutting machine features a dual-station high-speed shuttle table Achieves 15-second fast parallel exchange Loading/unloading and cutting processes run simultaneously without interference significantly boosts processing efficiency Doubles output per unit of time Crafted with care for eco-friendly design Equipped with zoned dust extraction Features 8–30 fully automatic high-power negative pressure extraction systems Smooth smoke discharge and excellent dust removal efficiency In terms of safety, our high-speed machines are more considerate Standardized with an industry-unique intelligent anti-collision human detection system Includes door interlock protection and motor torque detection Ensures safe production Designed to reduce the workload in sheet metal processing Guodpfxjwvpcmj Alfob Equipped with a fully automatic lubrication system A total of 16 automatic lubrication points across the XYZ axes Extends component lifespan by 300% Delivers higher running precision with lower maintenance costs

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Gujdsfv Hphopfx Alfjb Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg