Used Cross Wrap Oy Ltd Bo 4000 for sale (13,903)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Todpfx Aszp H R Eemksa Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Todpfx Aszma Skemkja

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. Todpfszma Tbsx Amkoa The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Year of construction: 2017, condition: new, functionality: fully functional, machine/vehicle number: Powerbord SPL 1200mm width Laminating, Model Powerbond SPL 120 Working width: 1.2 m Heating tunnel width: 1.7 m Cooling section: 1 m Electric power supply: 400 V / 3 phase / 50 Hz L1, L2, L3, N, PE Current at full load: 90 A Air supply: clean, dry air at 6 bar Number of heating modules: 24 including preheaters Number of heating zones: 6 Nominal power per module: 2.4 kW Total heating power: 58 kW Maximum temperature: 220 °C Tjdpfxoyl Ubfo Amkoa Maximum tunnel height: 150 mm Maximum pressure roller height: 25 mm Conveyor belt speed: 1–15 m/min PLC control system: Omron CJ2M Software serial number: OM1168 Airborne noise emission: < 70 dB(A) Dimensions (W x H x L): 1954 mm x 1480 mm x 3710 mm Weight: 2000 kg

Condition: excellent (used), REF: MM5767 Tsdjulc Sqepfx Amkea 1 x Adpak Machinery Systems Ltd stainless steel flow wrapper fitted with an ICE Zodiac Hawk thermal transfer printer and a fixed folding box. Manufacturer - Adpak Machinery Systems Ltd Model - GSP 65. Date of manufacture - 2009 approx, refurbished by Midas Motion in 2020. Sealing jaws - 300mm long. Fixed folding box - 40mm wide. Came out of production in 2023, this unit was previously used to individually wrap ice lollies.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, REF: MM5946 1 x DanTech UK Ltd 'Pig in Blanket' wrapping / rolling conveyor on mobile frame. Manufacturer - DanTech UK Ltd Model - PIB 400. Serial number - 8394. Date of manufacture - 2020. Belt dimensions - wire mesh, 5650mm long x 400mm wide. Tjdovw I Niopfx Amkoa Electric supply - 400 V / 50 hz / 3 phase.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,300 mm, total width: 1,830 mm, total height: 2,735 mm, warranty duration: 12 months, overall weight: 950 kg, input voltage: 380 V, power: 35.5 kW (48.27 HP), pressure: 4 bar, temperature: 110 °C, Universal machine for heat treatment of all kind of meat products and fish. Heating can be realized by electricity, vapor or gas. Air circulation system provides processes steadiness and operates with two speeds 1450/2850 min-. Todpfxewp I Axo Amkja Smoking generator can be installed to the left or to the right. Valve pneumatic control. Chamber is controlled by ADITEC. Control unit measures and control chamber and sausage temperature, humidity, delta t, processing time. 100 programs can be saved by 10 steps. Following sensors are used: Pt 100. Software for visual control is offered as an option. Chamber is equipped with a system for automatic washing. Each module is equipped with its own heating and circulation which ensure processes steadiness and processing time reduction.

Condition: good (used), Year of construction: 2015, web offset-flexo printing machine register BST camera control system unwinder semi rotary uv flexo chamber no.1 semi rotary uv flexo chamber no.2 semi rotary uv offset no.1 semi rotary uv offset no.2 cold embossing unit for offset semi rotary uv offset no.3 semi rotary uv offset no.4 semi rotary uv offset no.5 semi rotary uv offset no.6 semi rotary uv flexo chamber varnishing no.3 semi rotary die-cutting rewinder max speed 50 - 180 m/min color range 4 - 10 colors max print length 350 mm max paper width 320 mm max print width 300 mm max unwinding diameter 700 mm Tsdpfxowgitto Amkoa max rewinding diameter 600 mm machine including process-free CTP Agfa PT - R4300S

Condition: good (used), overall weight: 13,000 kg, total width: 2,200 mm, total length: 8,000 mm, total height: 3,300 mm, Flanging and dishing machine BOLDRINI - RIBO 20HY/4000 Tedpfozil H Ejx Amksa BOLDRINI RIBO 20HY/4000 Hydraulic Flanging & Dishing Machine. Capacity up to Ø 4,000 mm. Suitable for manufacturing dished ends, pressure vessel heads and tank bottoms. Length:8000mm Width:2200mm Height:3300mm Weight:13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: as good as new (ex-display), functionality: fully functional, FRONIUS TPS 4000 ROBOT SET Tedswbi E Sopfx Amkea .) Fronius power source (Tps4000) .) Fronius cooling unit (Fk 4000) .) Fronius wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package .) Fronius RCU 5000i .) Interface = INTERBUS RUGGED LINE (Optionally available: Profibus + €800 or Devicenet + €1400, others upon request) Manufacturer's list price: approx. €14,000 net We have €5,990 net - VAT deductible - invoice from the dealer. We always have several devices in stock in a wide variety of configurations. We are happy to receive your inquiries. The prices listed start at €... Prices/offers are customized based on the device configuration. Sample images of the devices. In stock in Vienna, 1230. Pallet shipping available for an additional charge: Austria approx. €180 Germany approx. €210 Europe upon request

Condition: good (used), Year of construction: 2011, Demmeler Turning Unit Robotix IP 4000 Tedpfx Amsw Rq Thokja Max. height: 3500 mm Servo-hydraulic drive Length: adjustable from 1000 to 12,000 mm Permissible weight: 11,000 kg Rotation: 360 degrees endless

Condition: excellent (used), mileage: 53,788 km, power: 132 kW (179.47 HP), first registration: 01/2019, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, Year of construction: 2019, operating hours: 2,689 h, Equipment: AdBlue, crane, = Additional options and accessories = - PTO = Additional information = Weights Tsdpjyit Rtsfx Amkoa Unladen weight: 7,285 kg Payload: 205 kg Gross Vehicle Weight (GVW): 7,490 kg Functional Mast: Telescopic Mast length: 37 m Lifting capacity: 4,000 kg Body make: BOCKER AK37/400 MOUNTING CRANE/ROOFERS CRANE/ROOFCRANE/KRAAN/GRUA CE certification: yes Condition Technical condition: very good Visual condition: very good MANN TGL 7.190 4X2 BB + BÖCKER AK37.4000 CRANE + JIB EURO 6 190HP DRIVE 4X2 BB HIGH ROOF WHEELBASE 390CM ONLY 53,788 KM!!! MANUAL TOOL LOCKERS BÖCKER AK37.4000 CRANE 4 X OUTRIGGER SUPPORT RADIO REMOTE CONTROL MAX. WORKING HEIGHT 37 METERS MAX. LIFTING CAPACITY 4000KG CE CERTIFICATE GERMAN REGISTRATION FOLLOW US NOW ALSO ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: K03903KT601220260601, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cycut, controller model: 6000, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser source model: MFSC-3000, laser hours: 80,000 h, laser power: 3,000 W, laser wavelength: 1,080 nm, pipe diameter (max.): 110 mm, pipe length (max.): 6,500 mm, table length: 7,000 mm, table width: 1,200 mm, table height: 1,800 mm, workpiece weight (max.): 80 kg, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, 1.This is Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine, equipped with MAXPHOTONICS MFSC-3000 3000W fiber laser source and BOCHU CypCut/HypCut professional tube cutting control system. 2.It adopts heavy-duty integrated welded bed with aging stress relief treatment, dual pneumatic self-centering front & rear chucks for stable clamping, short tail cutting design to improve material utilization. 3.The fully enclosed cutting cabin with integrated dust removal system realizes low smoke, low noise and laser radiation protection, meeting industrial safety and environmental standards. 4.Full closed-loop servo drive system ensures positioning accuracy ±0.04mm/m and repeat positioning accuracy ±0.03mm/m, maximum idle moving speed up to 120m/min, matched with water cooling chiller for stable laser output. 5.The machine supports cutting carbon steel, stainless steel, aluminum alloy, brass and copper tubes, compatible with round tube, square tube, rectangular tube, oval tube, angle steel and channel steel. 6.It can complete hole drilling, bevel cutting, intersecting line cutting and blanking in one process, ideal mass production equipment for metal pipe processing factories. Item Parameter Machine Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine Laser Source Brand MAXPHOTONICS Laser Source Model MFSC-3000 Tedpfjza Rm Hex Amkja Laser Power 3000W Wavelength 1080nm (±10nm) Control System BOCHU CypCut / HypCut (Tube Special Version) Structure Horizontal Heavy Bed, Dual Pneumatic Chucks Processing Tube Length Max 3000mm Clamping Range Round tube Φ10–Φ120mm; Square tube 10×10–80×80mm Positioning Accuracy ±0.04mm/m Repeat Positioning Accuracy ±0.03mm/m Max Idle Speed 120m/min Cooling Mode Industrial Water Cooling Processable Materials Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper Supported Profiles Round tube, square tube, rectangular tube, oval tube, angle steel, channel steel

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: K03903KLC301520260601, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Shanghai BOCHU Electronic Technology Corporation Limited, controller model: CypCut, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser source model: MFSC-1500、3000、6000、12000, laser hours: 80,000 h, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, table length: 5,100 mm, table width: 2,400 mm, table height: 2,300 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 25 mm, travel distance X-axis: 3,020 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 95 mm, cutting speed: 110 mm/min, positioning speed: 140 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,000 kg, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, overall weight: 4,500 kg, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, 1.This is a fully enclosed single-platform fiber laser cutting machine equipped with 6000W MAXPHOTONICS original fiber laser source and BOCHU control system. 2.Adopting integral welded bed with aging stress relief treatment, the machine features high rigidity and long-term stability. 3.The full-enclosed protective structure realizes smoke removal, noise reduction and laser radiation protection, meeting environmental protection and safety standards. 4.With high-precision servo drive system and intelligent height tracking cutting head, the machine ensures accurate positioning and smooth cutting section. 5. It is widely used for cutting carbon steel, stainless steel, aluminum alloy, brass and copper plates, featuring low failure rate, easy maintenance, high efficiency and stable mass production performance. It is an ideal equipment for sheet metal precision processing. 6.Laser Source Brand: MAXPHOTONICS Todpfx Ajza Rmysmksa 7.Laser Source Model: MFSC-6000 8.Laser Power: 6000W 9.Wavelength: 1080nm (±10nm) 10.Control System: BOCHU CypCut/HypCut 11.Structure: Fully Enclosed Single Platform 12Positioning Accuracy: ±0.03mm/m 13.Repeat Positioning Accuracy: ±0.02mm/m 14.Max Idle Speed: 120m/min 15.Cooling Mode: Water Cooling 16.Processing Materials: Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper

Condition: new, Year of construction: 2026, machine/vehicle number: K09002KEP142020260601, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 200 mm, operating speed: 40 mm/s, reverse speed: 200 mm/s, table width: 500 mm, table length: 1,200 mm, table height: 1,150 mm, throat depth: 330 mm, ram plate length: 1,200 mm, clearance between the columns: 970 mm, retraction force: 40 t, total length: 1,340 mm, total width: 1,310 mm, total height: 2,170 mm, overall weight: 2,800 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, safety light barrier, 1. Basic Information - Manufacturer: Jinan KaFe CNC; Model: KF-4012, self-developed proprietary design - Edge over hydraulic brakes: 80% energy saving, oil-free & eco-friendly, higher speed, precision & consistency Tjdpoza Rm Tefx Amkja - Applications: Cabinet, elevator, kitchen, solar, auto parts, home appliances & other sheet metal industries 2. Mechanical Structure 1. Frame: Full steel welded, FEA optimized, 5-face one-time machining for rigidity & long-term accuracy 2. Power Box: Heavy-duty ball screw + imported sealed bearings for stable bending load 3. Auto Compensation Worktable: Built-in deflection strips, dial fine-tune, standard reduction motor & scale 4. 4-axis Back Gauge: AC servo driven, auto collision avoidance during bending 5. Bending Dies: Quenched & ground, high tolerance accuracy, less secondary finishing, longer service life 6. Electrical Cabinet: Closed convection cooling, neat wiring, cantilever operation box; self-diagnosis, emergency stop & text fault alarm 7. Touch Screen: 5-wire type, over 10 million service cycles 3. CNC System (Taiwan SYNTEC) - 15-inch industrial touch screen, EMC & temperature tested industrial motherboard - Direct programming for simple bending tasks - Core intelligent functions: ±5μm repeated positioning (full closed-loop by grating/magnetic scale); auto back gauge calculation; mold library; one-time trial bend angle compensation; auto bending pressure calculation & overload alarm; continuous arc bending; password protection - System pages: Machining, Manual, Mold, Program, Compensation, Alarm, I/O Signals ## 4. Core Technical Parameters - Bending force: 400KN; Table length: 1250mm; C-type frame - Ram stroke:200mm; Max opening:500mm; Throat depth:330mm - Speed: Rapid/Return 200mm/s, Working 40mm/s - 6 controlled axes: Y1/Y2/X/R/Z1/Z2; Dual 11KW Y-axis servo, peak feed power 15KW - Overall size:1340×1310×2170mm; Weight:2.8T 5. Standard Core Component Brands - Control & servo: Taiwan SYNTEC - Switches: OMRON (JP); Grating scale: GIVI (IT); Electric parts: Schneider (DE) - Bearings: INA (DE); Linear guide: Fulei (DE); Timing parts: Shanghai Fulong - Y-axis screw & guide: Nanjing brand - Note: Equal-grade brands replaceable if original stock unavailable 6. General Advantages - Mechanical: High rigidity, full closed-loop precision, auto deflection compensation, anti-collision back gauge, durable dies - Control: Intelligent process compensation, multi-safety protection, real-time fault diagnosis - Operation: Energy-saving, zero hydraulic oil cost, fewer secondary processes, high mass production efficiency

Condition: ready for operation (used), Wingspan: 3950 mm Tedpezp Iqgofx Amkoa Overall height: 3650 mm Load capacity: 4000 kg without lifting device

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer Tsdpfx Ameznwu Seksa - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: new, Year of construction: 2026, machine/vehicle number: KF0409HKP20260601, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 170 mm/s, throat depth: 400 mm, total length: 1,685 mm, total width: 2,300 mm, working width: 3,200 mm, workpiece length (max.): 3,200 mm, workpiece height (max.): 370 mm, bending angle (max.): 90 °, number of spindles: 4, sheet thickness aluminum (max.): 6 mm, sheet thickness steel (max.): 4 mm, warranty duration: 12 months, Mechanical Structure 1. Frame: Integral thick steel plate welded structure with shot blasting stress relief, high torsion resistance, stable long-term precision; processed by large CNC boring & milling machine. 2. Sliding ram: Connected to cylinders via spherical joints; self-lubricating rectangular guide rails; fitted with 0.005mm grating scales on both sides for synchronous closed-loop detection. 3. Worktable: Equipped with motor-driven integral mechanical crowning wedge to compensate deflection. 4. Backgauge: Servo-driven ball screw with dual linear guides, modular multi-axis expandable design, fast and high-precision positioning. 5. Tooling & accessories: Quick clamping upper dies, dual V lower dies for fast mold change; adjustable front support stand with horizontal & vertical movement. 6. Anti-deviation structure: Dual-side grating scales eliminate throat deformation interference, strong anti-unbalanced load capacity. Tedpfx Aswfwkwomkja 7. Cantilever operation box conforming to ergonomics for easy operation. Hydraulic System 1. Integrated PHUCHIN hydraulic manifold, compact layout and zero leakage. 2. Original SKF/PARKER sealing rings for long service life. 3. Special oil tank with high cleanliness; oil level & temperature visual display; built-in overload protection. Electrical & Control System 1. Main SCHNEIDER electrical components, anti-interference and safe. 2. Movable foot switch with emergency stop; neat heat-dissipating electrical cabinet wiring. 3. DA53T CNC Controller (4+1 axes standard, expandable to 6+1 axes): - 15-inch color LED touch screen, multi-language support, mouse compatible - Storage: 999 workpieces, 20 upper molds + 20 lower molds, 100 programs with 25 steps each - Multiple ports: USB, RS232, Ethernet; supports robot linkage & automatic production line connection - Real-time mold graphics, programmable step speed, dual-machine linkage function Core Component Brands Hydraulic system: PHUCHIN/Bosch Rexroth; Oil pump: Hi-Tech/SUNNY; Grating scale: Italy GIVI; Seals: SKF/PARKER; Electric parts: Schneider; Main motor: Siemens/Lido Other Advantages - Comply with national JB & GB standards for press brakes; Noise ≤82dB(A) - 12-month warranty; 8-hour response & 24-hour on-site after-sales service 二、.Technical Parameters 1. Rated bending force: 1000KN 2. Max bending length: 3200mm; Column distance: 2700mm 3. Ram stroke: 200mm; Max opening height: 450mm; Throat depth: 400mm 4. Speed: Rapid traverse 180mm/s, working speed 0–10mm/s, return speed 170mm/s 5. Main motor power: 7.5KW; Power supply: 380V/50Hz three-phase 6. Precision Index - Y1/Y2 ram positioning accuracy: ±0.02mm; Repeat positioning: ±0.01mm - Workpiece angle tolerance: ±30' full length - X-axis backgauge repeat accuracy ≤±0.01mm; R-axis ≤±0.02mm 7. Environment requirements: Temp -5℃ ~ 40℃, humidity 55–85%RH, altitude ≤1000m 8. Standard axes: Y1,Y2,X,R,V (4+1 axes)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost - Processes carbon steel, stainless steel, aluminum, film-covered sheets - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin Tedsxu Uhvopfx Amkea

Condition: new, Year of construction: 2026, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, Your description for this machine will be as follows: Tedpfx Aey Hi Nnsmkoa "We offer a brand new 2026 model Ayba longitudinal and cross-cutting machine." If you have any questions or require further information, you can send us a message or call us.

Condition: used, Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Manufacturer: Automation Assistant Oy Type: LG2750 Date of manufacture: 07/01 Machine type: Linear Guided Free Fall Tester For sale is a used Automation Assistant Oy LG2750 Linear Guided Free Fall Tester. This linear guided free fall test stand was designed for reproducible drop and impact tests and is suitable for quality assurance, research, development, and industrial testing applications. Operating manual and electrical documentation are available. Technical data: Manufacturer: Automation Assistant Oy Type: LG2750 Power supply: 230 V AC / 50 Hz Max. current consumption: 10 A Control voltage: 24 V DC / 2.5 A Pneumatic supply: max. 8 bar Impact material: concrete garden paving stone 300 × 300 × 50 mm Frame: aluminum profile Protective panels: polycarbonate / XT-acrylic Other materials: aluminum, steel and POM Dimensions: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Weight of test tower: approx. 155 kg Weight of impact table: approx. 55 kg Total weight: approx. 210 kg Equipment: Touchscreen control panel Closed safety cabinet with protective glazing Linear guided drop sled Pneumatic gripper SMC pneumatic components Emergency stop system Impact table with concrete impact plate Electrical documentation available Application areas: Drop tests Impact tests Product testing Quality assurance Research and development Laboratory and industrial applications Transport data: External dimensions (W × D × H): approx. 850 × 900 × 2750 mm Transport weight: approx. 210 kg Condition: Tedpfx Amozn Uqdokja Used The unit was last used in an industrial setting. Optical condition as shown in the pictures. Scope of supply: Automation Assistant Oy LG2750 Linear Guided Free Fall Tester Operating manual Electrical documentation Accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), 300 USED Device for spraying cakes with fondant. Tjdeyg N Euepfx Amkea EXTERNAL DIMENSIONS (in cm): - height 88, - width 58, - length 50. The price is a net price WE SPEAK IN ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: good (used), 418 USED Boyens tabletop gel maker. EXTERNAL DIMENSIONS (in cm): - width 50, - length 28, - height 30. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport. The price is a net price. Tsdpjzf Hrbjfx Amkea Our languages: ENGLISH, FRENCH, GERMAN.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-2A-1S Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Tjdpfx Amoy Uuw Tskea Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. Tsdpfxsy Uquhj Amkoa An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.