Used Cross-Layer for sale (4,873)

Condition: ready for operation (used), Year of construction: 1992, A dismantled Autefa compensating stacker is available. Working width: 3000mm, working speed: 60m/min. On-site inspection is possible. Bedewwvw Tepfx Aikewr

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg Bedpfx Aozp H R Esikewr System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: like new (used), Range (depending on lighting conditions): up to 15 m Range with laser receiver: 30 m and more Bedpfed Ecncox Aikowr Leveling accuracy at 5 m: +/- 1 mm Self-leveling range: 4° +- 0.5° Accuracy of the horizontal line at 5 m: +- 1.5 mm Accuracy of the vertical line at 3 m: +- 0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm Bsdpjfv Hphefx Aikswr ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: excellent (used), Catalogue number 7937 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - top pneumatic clamp - blade guard cover - pneumatic blade feed - max. cutting height: 150mm - max. cutting width: 350mm - main motor: 5.5kW - extraction port diameter: 120mm - table dimensions (LxW): 740x500mm - table height from base: 900mm - roller tables: 2 pcs - infeed roller table with guide: 2050mm - outfeed roller table: 1650mm - roller table width: 510mm - overall machine dimensions without table (LxW xH): 1200x640x1280mm - weight approx. 500kg Bwedezrnt Hjpfx Aikor ADVANTAGES – Manufactured in Poland – Original technical documentation (DTR) – 2 roller tables – Pneumatic blade stroke – Used saw, excellent condition Net price: 14,900 PLN Net price: 3,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary due to exchange rate fluctuations)

Year of construction: 2025, condition: new, functionality: fully functional, "Columbus Vacuflex" Vacuum Bag – Available Immediately! (Professional vacuum bag for a wide range of vacuum technology applications) The COLUMBUS Vacuflex is a robust and versatile vacuum bag designed for applications such as vacuum form bonding, veneering, coating, and laminating workpieces made of wood and wood-based materials. Thanks to its flexible construction, the vacuum bag is particularly suitable for workpieces that, due to their size or geometry, cannot be processed, or can only be processed to a limited extent, in conventional vacuum presses. The fabric-reinforced and durable material ensures a long service life, even under demanding professional use. At the same time, the vacuum bag allows for easy handling and can flexibly adapt to various workpiece shapes. With the COLUMBUS Vacuflex, even very large or complex workpieces can be efficiently produced. This makes the vacuum bag ideal as a standalone tool for smaller production environments as well as a valuable addition to existing vacuum presses, significantly broadening the scope of applications. Bjdszqtnmspfx Aikowr Technical Specifications • Robust, fabric-reinforced vacuum bag • High flexibility for a wide variety of workpiece shapes • Suitable for form bonding, veneering, and laminating • Ideal for large or complex workpieces • Simple integration into existing production processes • Perfect as an accessory for vacuum presses The COLUMBUS Vacuflex is developed and manufactured directly by the OEM and is designed for long-term use. High-quality materials and meticulous workmanship ensure exceptional reliability and long service life.

Year of construction: 2025, condition: new, functionality: fully functional, VACUFLEX Vacuum Bag – More Possibilities Without Major Investment Would you like to carry out veneer work or form bonding – but without a significant investment in a press? Then this VacuFlex Vacuum Bag is the perfect solution. With this, you can: - easily bond and (shape-) veneer layers - work flexibly and efficiently - accept new orders - economically produce even one-off pieces This means for you: More possibilities in your workshop – without requiring extra space or incurring high fixed costs. Condition: Ready for immediate use Especially interesting for: - Smaller businesses Bwodpfxjzqtm Ae Aiksr - Getting started with vacuum technology - Supplementing existing equipment

Condition: new, Year of construction: 2026, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range, horizontal: 45° - 90° - 25° Miter range, vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Bsdpfx Asiy Ry Ajikowr Rotational speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Weight: 490 kg

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer cross-gluing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Bsdpfxjumrf Ae Aikswr Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Compressed air 6 bar Glue types PVA or UREA based

Condition: used, Year of construction: 2015, functionality: fully functional, Machines connected in one line (all three machines are only sold together): 1. Veneer cross-jointing machine FURNIMASTER FZR-21 2. Direct unloading device DA-12R Bsdpjy Tpb Rofx Aikowr 3. Scissor lift INCLUDED Veneer specifications Veneer strip length (grain direction) 350 - 2100 mm Veneer strip width (cross grain) 50 - 500 mm Veneer strip thickness 0,3 - 1,5 mm Power data Maximum nominal output / machine cycles 30 cycles/min. Average production speed 17 - 20 cycles/min. Connection data (Basic machine) Connection power 9 kW Compressed air 6 bar Power consumption Electric energy 6,2 kWh Compressed air 15 NL/min. Dimensions and weight (Basic machine) Length 3500 mm Width 1500 mm Height 1530 mm Working table height 930 mm (+50/-0 mm) Net weight, approx. 2500 kg

Condition: used, Year of construction: 2003, Saw blade diameter: 350 mm, bore diameter: 30 mm, motor: 2 kW, speed: 3800 rpm. Extraction connection diameter: 95 mm. Weight: approx. 105 kg without stand. Cutting width at 90°: 430 mm, at 45°: 300 mm. Cutting height: 135 mm. Hydraulic return brake. Without stand and roller conveyors. Bwedpfx Aoyw Tzisikjr

Condition: used, Year of construction: 2007, No. 3177 Automatic optimizing cross-cut saw WEINIG Dimter OptiCut 200 - 1 Bwodpfxou Atmus Aiker Used, year of construction 2007, machine already dismantled For cutting timber to fixed lengths Timber dimensions to be processed: Minimum / maximum input length: 3000 - 5000 mm Minimum / maximum input width: 80 - 200 mm Minimum / maximum input thickness: 38 - 80 mm Maximum timber cross-section: 200 x 50 mm Minimum / maximum finished timber length: 700 - 1000 mm Average number of cuts per board: 5 Types of wood: softwood or hardwood System performance: Maximum feed speed: 180 m/min, continuously adjustable Time per cutting cycle, including braking: 0.7 - 1.2 seconds Overview of components: Item 1: Infeed conveyor belt upstream of the saw Length: 1.5 m, coupled to the saw’s feed motor Item 2: Automatic cross-cut saw OptiCut 200 - 1, left-hand version With integrated length-measuring wheel and integrated blow-out device for waste pieces Graphics-capable operator terminal with 1/4 VGA display, numerical keypad and function keys, including the OptiCom software package for system control The machine is fed from the left-hand side Item 3: Outfeed conveyor belt / sorting station With drive unit, without ejectors Conveyor length: approx. 1.5 m The infeed table was not used by the previous owner. Two feed rollers were installed for feeding the material. The conveyor table is included, only the rubber conveyor belt is missing. Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: good (used), Code: 0370 Bodpfx Aijuiwqhskowr Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Bwsdetu Hy Espfx Aikjr Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Bwedpjxztydefx Aiker Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: good (used), Suspension clamp, clamping sleeve, flange clamp, pipe connector, flange clamping piece, cross clamping piece, cross clamp connector, cross clamp -Manufacturer: Rose Krieger, 4 pieces cross clamp connectors, aluminum cross clamp, round tubes -Type: Size 50/25 mm -Submission/Price: complete -Dimensions: 135/65/H65 mm Bwsdpfx Aeznu Ageiksr -Weight: 0.6 kg/pc.

Condition: new, Year of construction: 2026, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Bedpfevu Uwujx Aikswr Table description Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 4 mm/0.02 mm vernier

Condition: new, Year of construction: 2026, functionality: fully functional, 600x240 mm Cross Table Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Bwjdpfxovu Trwj Aiksr Table description Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 4 mm/0.02 mm vernier

Condition: new, Year of construction: 2026, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is the pitch which provides a preview of the X,Y axes position of the table 2.5 mm/0.02 mm vernier Bwedpfx Asvu Tp Ajiksr

Condition: new, Year of construction: 2026, functionality: fully functional, Precise cross table with screw cover, sliding guides made using the "dovetail" method significantly improve the stiffness of the table and enable the elimination of play in feeds. Description of the cross table The cross table is solidly made of high-quality materials. Bwsdpfovu Tn Ssx Aikor Ideally supports work on drilling machines, milling machines, etc., thanks to which we achieve precise positioning when boring or drilling. Cross table equipped with a swivel base with a 360°/3mm pitch. Screw cover prevents chips from entering the feed working mechanism. An additional advantage of the table is a strip scale that facilitates constant viewing of the table's position in the X and Y axis Nonius 4 mm/0.02 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Precise cross table with a screw guard, dovetail-shaped slide guides greatly improve table rigidity and prevent feed wiggling. Table description of 185x100 mm Cross Table Bwedpfxjvu Tqyj Aikor Cross table is well-made from high-quality materials Supports working with drilling, milling machines, etc., providing perfect positioning during machining processes Screw guard protects the feed mechanism from chips An additional benefit of the table is a pitch, which simplifies telling the X,Y axes position of the table 2.5mm/0.02mm vernier

Condition: excellent (used), Catalogue No.: 7858 ADVANTAGES – Polish production – for cross-cutting packages or round timber – unpainted – mobile, on wheels – used saw, in very good condition TECHNICAL DATA guide bar length: 2100 mm cutting length: 1900 mm automatic lubrication of the cutting system damping and tension system in the head manual guide bar feed electric motor: 7.5 kW transport dimensions (L/W/H): 1900x900x2710 mm total weight: 205 kg Bwedpfx Ajzkhnboikor Net price: 28,900 PLN Net price: 6,880 EUR (based on exchange rate 4.2 EUR) (Prices may change in the event of significant fluctuations)

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm - Blade guard included - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES – Made in Germany – 2 roller tables – Pneumatic saw blade stroke – Used saw in perfect condition Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) Bjdozkg Aqepfx Aikswr (Prices may change with significant fluctuations)

Condition: excellent (used), For sale is an industrial crosscut saw from the renowned German company Paul Maschinenfabrik GmbH & Co. Model 15 A0 is a reliable and robust machine, perfect for any sawmill, carpentry workshop, or pallet production facility, guaranteeing speed, precision, and cutting safety. ⚙️ TECHNICAL DATA AND SPECIFICATIONS: Manufacturer: Paul Maschinenfabrik GmbH & Co, Dürmentingen (Germany) Type / Model: 15 A0 Machine Number (Masch. Nr.): 8621628 Date of Manufacture (Liefertag): 17.03.1986 Motor Power: 3 kW (according to the nameplate, the machine's connected power ranges from 3 kW to 4.5 kW) Supply Voltage: 380 V / 50 Hz (20-25A fuse) Spindle Diameter: 30 mm Dimensions of work tables (included): Left feed table: 240 cm Right discharge table: 180 cm Maximum cutting width: Up to 450 mm - 500 mm, depending on the blade used and the final machine configuration. 🛠️ ADVANTAGES AND MACHINE FEATURES: Hydraulic drive: The saw blade advances hydraulically with the possibility of smooth adjustment, which significantly facilitates operation, ensuring smooth performance and reducing operator fatigue. Integrated clamping and safety: The hydraulic clamping system for the material being cut also functions as a blade guard, guaranteeing the highest safety standards at the workstation. Comfort and efficiency: Very long roller tables allow for convenient handling of even exceptionally long timbers or boards. Bwodpfx Aiszp Af Ssker Solid German construction: Durable construction (Made in Germany) ensuring stability, complete absence of vibrations, and very long service life, even with intensive use in a multi-shift system. 📍 ADDITIONAL INFORMATION: Condition: Used machine, in very good condition and fully functional. The machine is ready for on-site testing and immediate implementation in production.

Condition: used, Year of construction: 1999, total height: 1,800 mm, total length: 5,700 mm, total width: 2,300 mm, Colour: White Weight: 2.000 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 10.7488 - Main motor power [kW]: 6.3 - Max. saw length [mm]: 5200 - Max. saw width [mm]: 360 - Max. saw blade diameter [mm]: 600 - Input table length [mm]: 5200 - Output table length [mm]: 3300 - Options: Automatic pusher system - Transport dimensions: 5700mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bjdpezmxvzjfx Aikswr Yorick Diebels