Used Data Logger for sale (16,569)

Condition: excellent (used), G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent Data Logger GL5350 Performance meets intelligence Future generations of vehicles will be increasingly equipped with intelligent driver assistance systems, complex multimedia components, and systems for autonomous driving. These complex, networked technologies generate ever-larger amounts of data, making troubleshooting during the development phase more complex and time-consuming. To shorten test drives, reduce their number, and still meet the testing requirements of all departments, the advantages of an intelligent and powerful data logger, such as the GL5300 series, come into play. The GL5300 series covers the time-synchronized recording of LIN/CAN & CAN FD bus systems, FlexRay networks, and Ethernet networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 units for an additional 20 CAN FD channels with SIC transceivers, as well as up to 3 GL5450 units for the synchronous recording of up to 60 100-Base-T1 (30 taps) and up to 18 1000-Base-T1 lines (9 taps). Residual bus simulation Classification unit Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on Flexray, XCP on Ethernet Sending of any, freely configurable messages Selective recording (extensive trigger and filter conditions) Data transfer via LAN/WLAN, USB, and mobile network Operation via menu control Technical data: GL5300 configuration GL5350-8H-1R3L CAN interfaces CAN 2.0 16 CAN FD 4 LIN interfaces 5 RS-232 interfaces 7 Analog inputs 10 bit 4 Operating voltage +7 V … +50 V Power consumption at 12 V: typ. 10.3 W Current consumption at 12 V: in sleep mode < 2 mA in semi-sleep mode typ. 180 mA in operation typ. 860 mA Operating temperature range -40 °C ... +70 °C Housing: Material side profiles: Al Mg3 Lid: EN AW-6060 (AlMgSiO,5) T66 Decorative strip: ABS Dimensions (L x W x H) 212 x 290 x 80 Weight ~ 3500 g Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone. Dsdpfxszg Tzro Ap Dsku

Condition: used, CAN-BUS Digital Data Recorder See also my other offers from the automotive measurement technology sector. 2 units available As shown, without data storage device. BUSDAQ-VW-ET is also known as BUSDAQ-X-ET. CAN nodes: 2-6, 8 on request (extendable with up to 3 MBUS cards; CAN, LIN, ARINC). Dodpfewm Ir Ujx Ap Deku Baud rate: Max. 1 Mbps. Digital In/Out: 4 (D-sub15). LAN Interface: TCP/IP. External Modem: DSUB9. Storage: Compact Flash. Sync. Plug: BNC. CTRL Plug: DSUB9. Surge protection: 60 V. Supply power consumption: 10-50 VDC, 200 mW.

Condition: used, 3 units available. See also my other devices from the automotive measurement technology category. Dodpowm It Ssfx Ap Doku Price per unit without disk 4 CAN interfaces

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives, solar cables, inverters, data processing devices, microloggers -Campbell: Scientific SDM-CAN Datalogger -Dimensions: 235/110/H20 mm -Weight: 0.3 kg Dkedofg I D Nopfx Ap Dsu

Condition: used, Designation: Vibration Test System Manufacturer: Data Physics Model: LE-1216-3VH Force Rating: Sine (5 - 2000 Hz) Dedpfx Apey Rqiwo Deku Random (20 - 2000 Hz) 12000 lbf (53.4 kN) vector 12000 lbf (53.4 kN) rms Frequency Range Full Force Reduced Force Level 5 to 3000 Hz 2500 to 3000 Hz Maximum Displacement (Peak-Peak): Rated Stroke Limit Shock/Bump Continuous or Random Electrical Overtravel Limit Between Mechanical Stops 3.0 in (76 mm) 2.5 in (63.5 mm) 3.1 in (79 mm) 3.2 in (81 mm) Maximum Velocity 71 in/s (1.8 m/s) Maximum Acceleration Sine 100 g vector, 5 to 2500 Hz Random 50 g rms, 20 to 2000 Hz Fundamental Resonance Frequency (Bare Table) 2050 Hz (nom.) Body Suspension Natural Frequency — Thrust Axis: - Vertical: 2 Hz - Horizontal: Below 2 Hz Blower Power (Full Load): 20 Hp, 20 kW; 230/460 V, 3-phase, 60 Hz Alternate Power: 20 Hp, 20 kW; 208/400 V, 3-phase, 50 Hz Air Pressure: Air Spring: - Vertical: 90-100 psig (621-690 kPa) - Horizontal: 2-5 psig (14-34 kPa) Field Specifications: - Rated Current (dc): 64 A - Maximum Voltage (dc): 240 V - Field Resistance at 20°C: 3.2 ohm Stray Flux Density with degauss coil: < 14 gauss at 12 in (304 mm) above table Field Protection: - Rated degauss coil current: 2.6 A (Nominal) - Maximum degauss coil voltage: 120 V Weight: 1216-3VH: 8000 lbs (3636 kg) Power Amplifier Model: DSA10-80 Item condition: Used item as shown in pictures Armature newly rewound Slip table / 40 mm grid M8 760 x 760 Armature bolt circles 8" / 16" M10 Please contact us if you have any questions. Shipping: The quoted shipping costs apply to deliveries within Germany. Worldwide shipping (please inquire for shipping costs outside of Germany). Sale only to commercial customers, without warranty or guarantee. Deviations from technical data and errors in the description of the items may occur and are subject to change.

Condition: used, inverter, data processing device, data logger Dkjdpfoffk Iiox Ap Dju -Manufacturer: Wilmers, wilog Data Logger -Housing: 0903-35-OP303 -Mounting parts: see photos -Dimensions: 500/300/215 mm -Weight: 11.6 kg

Year of construction: 2013, condition: good (used), BHT INNOVA E3 Professional Bronchoscope Washer INNOVA – Professional Endoscope Washer for Practices and Small Clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washer. This endoscope washer is compact and offers a high capacity for endoscopes and bronchoscopes. Depending on the reprocessing method, a total of 10 to 20 endoscope reprocessing cycles are possible per day. This makes it the perfect solution for private physicians and small clinics that value safe hygiene, efficiency, and reliability. Reliability and the highest level of cleanliness in every cycle: By meeting DIN EN ISO 15883-1/-4 and the guidelines of the RKI (Robert Koch Institute), as well as offering many additional features, such as thermal self-disinfection at 90°C according to DIN EN ISO 15883-4, 4.8.1. - Flexible in combination with another INNOVA® E2 or E3 for 30 to 40 reprocessing cycles per day. - Suitable for both glutaraldehyde and peracetic acid from a variety of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber possible. - Option for thermal reprocessing, e.g., multiple biopsy forceps, polypectomy snares, etc. - Thermal disinfection of the final rinse water, as recommended by the RKI, in the DH version. - Secure documentation and traceability via batch control. Recording of user and endoscope via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing computer systems. Number of endoscopes: For 2 endoscopes or 4 ENT scopes Hygiene concept: Hygienic workflow, single-door Channel connection system: Single-channel connection or patented pressure chamber system possible Single-channel monitoring (CMS): No Chemistry (glutaraldehyde / peracetic acid): Both possible: DH version (with boiler, for glutaraldehyde) or DC version (filter solution, for glutaraldehyde or peracetic acid) Documentation and integration: Yes, interface for printer/data logger standard. Printer standard. Optional scanner/computer interface Thermal reprocessing of instruments at 90°C: Possible with additional equipment Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connection value: 11 kW. Fuse rating: 3 x 20 A Year of manufacture: 19.01.2013 Item condition: used Dksdpfoin Edwex Ap Dsu You can find more items - new and used - in our shop! International shipping costs on request!

Condition: like new (used), Binder VD 23 vacuum dryer, ex-demo, like new. Manufacturer's description: PRODUCT DESCRIPTION The BINDER VD series vacuum dryer ensures gentle drying and impresses with precise temperature control. The patented BINDER expansion shelves provide optimal heat transfer. The shelves can be freely positioned, and the chamber is easy to clean. KEY FEATURES Temperature range: Ambient temperature plus 9°C up to 220°C Controller with digital pressure and temperature display Program-controlled drying monitoring with automatic ventilation at the end of the process Internal data logger, measurement values available in open format, readable via USB Dkjdpfx Apsx S R A Ts Dju 1 aluminum expansion shelf, individually positionable Inert gas connection DN 16 access port – for introducing external measuring instruments Safety glass window, spring-mounted with splash protection Large observation window, optionally with interior lighting PC interface: Ethernet 5 units in stock

Condition: used, Year of construction: 1989, table length: 2,240 mm, table width: 1,400 mm, workpiece weight (max.): 5,000 kg, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time, no later than October 31, 2026! TECHNICAL DETAILS Longitudinal adjustment of the table (X-axis): 2,000 mm Transverse adjustment of the intermediate slide (Y-axis): 1,600 mm (1,500 mm) Vertical adjustment of the crossbeam (W-axis): 900 mm Adjustment of the drilling spindle (Z-axis): 400 mm Distance between the table clamping surface and the spindle head: min. 100 mm Distance between the table clamping surface and the spindle head: max. 1,400 mm Passage between the columns: 1,600 mm Workpiece weight max.: 5,000 kg Tool holder: SK 50 Table Width of the clamping surface: 1,400 mm Length of the clamping surface: 2,240 mm Clamping surface: 3.14 m² Number of T-slots: 9 T-slot width: 22 H7 mm Distance between T-slots: 160 mm Adjustment speeds Axis X: 0.1–4,000 mm/min Axis Y: 0.1–4,000 mm/min Axis Z: 0.1–4,000 mm/min Difference between adjacent feeds: 0.1 mm/min Rapid traverse speeds Dsdpsz Hvyzsfx Ap Doku Axis X: 12,000 mm/min Axis Y: 12,000 mm/min Axis Z: 8,000 mm/min Axis ZW: 1,600 mm/min MACHINE DETAILS Control system: Siemens 840D Dimensions & Weight Space requirement (L × W × H): 7,000 × 6,500 × 5,300 mm Weight: 22,500 kg EQUIPMENT Comprehensive documentation All fluids will be drained before collection. Data backup has been saved to a USB drive. A 10-ton bridge crane is available on-site to assist with disassembly and loading. A forklift can be used if arranged in advance.

Year of construction: 2023, condition: ready for operation (used), A Kohnle conveyor belt oven is available. Heating length: 1000mm, max. operating temperature: 1120°C, cooling length: 1850mm, throughput speed: 100mm-1000mm/min, channel height: 40mm, conveyor belt width: 110mm, machine dimensions X/Y/Z: approx. 5000mm/650mm/1350mm, control: Simatic HMI. Including ammonia splitter, data logger, nitrogen curtain at the front and rear and an additional pot conveyor. Documentation available. On-site inspection is possible. Expected to be available from March 2025. Djdpfjvuafkex Ap Dsku

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, warranty duration: 3 months, Equipment: documentation/manual, Complete Package Including: 1 Zoom 90 R 5'' Robotic Total Station with WinCE AiM360, TRack360, and Scout360, 5", accXXess10 EDM 1000M, 1 Long-range Bluetooth handle 500m, 1 Manual in French or English, 2 Li-Ion 4.4Ah batteries, 1 Li-Ion battery charger, 1 Lead-free optical plummet, 1 Industrial-grade SD card, 1GB, 1 Notebook holder, 1 360° prism, 1 Touchscreen tablet, 1 X-Pad topographic software included. Calibration certificate. Suitable for Civil Engineering, Surveyors, Topographers, and Construction. The Zoom90 robotic total station is an ultimate single-operator system, offering up to 20% more automated performance, extended non-prism measurement capabilities up to 1000m, STReAM360, accXess technologies, and open Windows CE connectivity. Djdpfxezq Hu Hj Ap Dsku OPEN CONNECTIVITY Connect your preferred software and data logger to perform remote control tasks without reducing productivity. The Zoom90 uses the Windows CE operating system, which allows the execution of many powerful field software programs. Full VGA color touchscreen, guaranteeing optimal performance and graphic capabilities. TOPOGRAPHY ADVICE Alternative solutions in terms of measurement and software. #Topography #TotalStation #Leica #LeicaGeosystems #TopographicEquipment #UsedTopography #Surveyor #Geomatics #3DScanner #GPS #Theodolite #Monitoring #CivilWorks #ConstructionSite #LaserScanner #Mapping

Condition: used, BINDER Vacuum Drying Oven with Pump Module BINDER VD 56 + VD-M 53 Vacuum drying oven up to 220 °C with pump unit and BINDER VAP 1 vacuum pump. For sale is a used BINDER VD 56 vacuum drying oven from the year 2023, including a matching BINDER VD-M 53 pump module and BINDER VAP 1 vacuum pump. The system is suitable for the gentle drying of temperature-sensitive materials under vacuum conditions, as well as for applications in laboratories, research, development, quality control, and industrial process technology. Technical data: Manufacturer: BINDER GmbH Model: VD 56 Device type: Vacuum drying oven Year of manufacture: 2023 Article number: 9630-0002 Version: VD056-230V Made in Germany Temperature range: +9 °C above ambient temperature to +220 °C Internal volume: 55 liters Heating time to 100 °C: approx. 80 min Spatial temperature deviation at 100 °C: ± 1.2 K Temporal temperature deviation at 100 °C: ± 0.1 K Vacuum data VD 56: Leak rate: 0.01 bar/h Vacuum connection: small flange DN 16 Measuring port: small flange DN 16 Electrical data VD 56: Rated voltage: 200–230 V Mains frequency: 50 / 60 Hz Rated power: 1.4 kW Rated current according to nameplate: 6.1 A Phase: 1N~ Protection class: IP20 Dimensions VD 56 without attachments and connections: approx. 638 × 461 × 815 mm (W × D × H) Internal dimensions: approx. 400 × 343 × 400 mm (W × D × H) Net device weight: approx. 96 kg Load capacity: Maximum load per insert: 20 kg Maximum total load: 60 kg Number of inserts standard / maximum: 1 / 5 Pump module: Manufacturer: BINDER GmbH Type: VD-M 53 Device type: Pump module for vacuum drying oven Article number: 8012-1943 Year of manufacture: 2023 Voltage: 200–230 V / 50–60 Hz Power: 1.80 kW Current consumption: 8.0 A Phase: 1N~ Protection class: IP20 Made in Germany Vacuum pump: Manufacturer: BINDER GmbH Type: VAP 1 Device type: Vacuum pump Article number: 5013-0217 Year of manufacture: 05/2023 Pumping speed: 2.0 / 2.2 m³/h Ultimate pressure: < 7 mbar Voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 1.6 / 1.5 A Protection class: IP40 Made in Germany Equipment: BINDER VD 56 vacuum drying oven BINDER VD-M 53 pump module / pump unit BINDER VAP 1 vacuum pump Digital controller with display of pressure and temperature Program-controlled drying monitoring Dkodpfx Apsz Ikx Ue Dou Automatic ventilation at the end of the process Internal data logger Ethernet interface Universal ventilation for inert gas or ambient air Vacuum connection DN 16 Measuring port DN 16 Safety glass pane with splinter protection Large viewing window Tray insert Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions according to the images Accessories according to the images Applications: Vacuum drying Gentle material drying Laboratory and experimental technology Research and development Quality control Material testing Industrial process technology Temperature and vacuum applications Scope of delivery: 1 × BINDER VD 56 vacuum drying oven 1 × BINDER VD-M 53 pump module / pump unit 1 × BINDER VAP 1 vacuum pump Vacuum and connecting hoses Connection and mounting parts Connection cables Operating and assembly instructions Accessories according to the images Scope of delivery as shown Overall dimensions including pump module: approx. 638 × 645 × 1,542 mm (W × D × H) Total weight including pump module and vacuum pump: approx. 130 kg Condition: Used Year of manufacture 2023 Optical condition according to the images Nameplates are present Scope of d

Year of construction: 2025, condition: like new (used), Binder MKF 720 E5 Climate Chamber, year 2025. Brand new, unused chamber with 3-year warranty on spare parts. The Binder MKF 720 E5 is a professional climate/environmental chamber designed for stability studies, temperature, and climate testing in compliance with DIN and IEC standards. The E5 series is part of Binder’s latest generation, featuring a touchscreen interface and advanced program control. Key features: * Temperature range: -40°C to +180°C Dkodpfx Asy Sg Nvop Dou * Humidity range: 10–98% RH * Chamber volume: approx. 734 liters * APT.line™ preheating chamber technology * Ultra-fast temperature changes * Humidity control via capacitive sensor + steam humidification * Binder E5 touchscreen controller with segment and time programming * Integrated data logger + data export via USB * Ethernet interface * Heated inspection window with LED lighting * Automatic water supply and drainage management * Stainless steel interior chamber * Compressor cooling * Refrigerant: R-452A

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, total width: 1,410 mm, overall weight: 2,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS UNITS Number of units: 10 1. Unit: Pre-milling unit 2. Unit: Gluing unit 3. Unit: Pressure rollers 4. Unit: Trimming unit 5. Unit: Rough milling unit 6. Unit: Edge rounding unit 7. Unit: Fine milling unit 8. Unit: Edge rounding unit 9. Unit: Radius drawing unit 10. Unit: Brushing unit ELECTRICAL DATA Voltage: 400 V Power: 16.2 kW MACHINE DETAILS Year of manufacture: 2020 Color: Gray CE marking: present Serial number: 20.082 Length: 6,000 mm Width: 1,410 mm Height: 1,670 mm Weight: 2,200 kg Transport length: 6,000 mm Transport width: 1,415 mm Transport height: 1,670 mm Transport weight: 2,200 kg Transport packages: 1 EQUIPMENT Tools for pre-milling unit Tools for pressure rollers Tools for trimming unit Tools for rough milling unit Dkjdpfx Aoz Eawzjp Deu Tools for edge rounding unit Tools for fine milling unit Tools for radius drawing unit Tools for brushing unit

Condition: used, This listing is for Thermo Scientific TSX Series High-Performance Undercounter Laboratory Refrigerator – Glass Door The unit is in full working condition and ready for immediate use The Thermo Scientific TSX505GA is a 156-litre high-performance undercounter laboratory refrigerator with a glass door and adjustable temperature range of 3°C to 7°C. It features automatic defrost, three adjustable shelves, touchscreen control, temperature alarms and an integrated data logger. The unit operates from 100–240V and has a low noise level of approximately 35 dBA Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with Dkjdpfxsz D E Uij Ap Dsu in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: used, This listing is for the Adam Solent Precision Analytical Balance + Adam ATP Printer The unit is in full working condition and is ready for immediate use The Adam PW124 analytical balance is a reliable, precision instrument tailored for tasks requiring high accuracy—such as chemical analysis, formulation, and quality assurance. It combines ease of use, robust features like internal calibration and GLP-compliant data outputs, and sturdy construction that supports dependable performance in demanding laboratory environments. Key Features Exceptional Precision: Readability of 0.0001 g, repeatability around 0.0002 g, and linearity approximately 0.0002 g Backlit LCD Display: Easily readable under varying lighting conditions, with programmable backlight settings Calibration: Equipped with internal calibration, eliminating the need for external weights Connectivity: Includes an RS‑232 port for interfacing with PCs, printers, or data-loggers; supports GLP-compliant printouts with date and time Capacity Tracker: Visual indicator to help prevent overloading the balance Additional Functions: Offers selectable digital filtering for stability in changing environments, multiple weighing units, and standard lab weighing modes (e.g., check-weighing, parts-counting, percentage weighing, net/total) Dkodpfx Apoxhfgvs Dju Security and Durability: Features password protection, a security slot for locks, sealed keypad, and robust metal housing—suitable for long-term lab use GLP Compliance: Capable of generating reports that include crucial data such as time, date, and calibration verification

Condition: as good as new (ex-display), Year of construction: 2025, Binder VDL 115 (2025) laboratory vacuum chamber, in perfect condition, demonstration unit Model: Binder VDL 115 Year of manufacture: 2025 Condition: like new – demonstration unit, after factory tests Capacity: 115 liters Power supply: 230 V Availability: in stock VAT invoice: yes Location: Grabina 92-701 Poland Optional: transport --- BINDER VDL 115 – laboratory vacuum dryer for flammable solvents BINDER VDL 115 is an advanced laboratory vacuum dryer designed for the safe drying of materials containing flammable organic solvents. Thanks to its design compliant with the ATEX 2014/34/EU directive, the device ensures the highest level of safety and precision during laboratory and industrial processes. Dsdpfxsvq I Tnj Ap Dsku The VDL 115 model offers fast and gentle drying with optimal heat transfer through aluminum heating shelves. An intuitive controller with a touchscreen enables convenient monitoring of temperature and pressure, and an automatic drying program ensures controlled process execution and automatic venting of the chamber after completion. Key features: * Chamber capacity: 119 l * Temperature range: from +9°C above ambient temperature to +110°C * ATEX explosion-proof certification EX II 2/3/- G IIB T3 Gb/Gc/- X * Intuitive controller with a color touchscreen * Graphical display of temperature and pressure * Built-in data logger with USB export * Software monitoring of the drying process with automatic chamber venting * 2 aluminum heating shelves (expandable to 6) * Connection for inert gas or air * DN16 port for mounting sensors and measuring cables * Large viewing window with safety glass * Ethernet interface for communication with a computer Technical data: * Capacity: 119 l * Maximum temperature: 110°C * Maximum shelf load: 20 kg * Maximum total load: 70 kg * Rated power: 1.6 kW * External dimensions (W × H × D): 743 × 942 × 581 mm * Weight: 158 kg Applications: * chemical and pharmaceutical laboratories, * electronics industry, * research and development (R&D) laboratories, * quality control, * drying of samples containing organic solvents, * processes requiring safe operation under vacuum conditions. BINDER VDL 115 is a professional, premium-class vacuum dryer, combining high performance, precise control, and compliance with ATEX safety requirements, making it ideal for the most demanding laboratory and industrial applications.

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases Dkodpfxexhfqbo Ap Dsu The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Year of construction: 2026, condition: like new (used), Binder KB PRO 130, model year 2026, ex-demo unit in new condition. 2-year warranty on spare parts. Product description: PRODUCT DESCRIPTION A versatile workhorse among thermostat chambers: KB PRO is our most efficient incubator with cooling. A temperature range from -20°C to +100°C and extensive programming functions enable a wide range of applications that go far beyond incubation. KEY FEATURES Temperature range: -20°C to 100°C Proven APT.line™ preheating chamber technology Energy-efficient cooling thanks to a modern inverter refrigeration unit Cooling using the environmentally friendly refrigerant R-290 Door heating to prevent condensation Adjustable fan speed Robust housing construction with HIT sandwich technology Inner chamber made of stainless steel Inner door made of safety glass coated with metal oxide Two wire shelves made of stainless steel Access port Ø 30 mm with silicone stopper Stackable design Intuitive controller with touchscreen, time segment programming, and real-time programming Internal data logger, measurement values in open format can be read via USB Independent temperature protection class 3.3 (DIN 12880) with optical and acoustic alarm Device self-test for comprehensive status analysis Dkedpfx Apjy Urc He Dou Data exchange interfaces: Ethernet, USB BINDER Multi Management Software APT-COM™ Basic Edition Optional CO₂ gas modules for plant cultivation (0-1%) and cell culture (0-20%)

Condition: excellent (used), Infrico Medcare LTF 90S Laboratory Freezer The Infrico Medcare LTF 90S is a professional laboratory freezer from the Lab-Care series, specifically designed for storing samples at extremely low temperatures in medical and scientific facilities. Technical Specifications The device is characterized by high temperature stability and safety features. As the LTF 90S is part of the Lab-Care series, it incorporates the standard features of this series from Infrico Medcare: Insulation: High-pressure molded polyurethane (CFC-free) with a density of 43–45 kg/m³ and a thickness of up to 100 mm for ultra-low temperature freezers. Dkedpfjyk E D Usx Ap Dou Refrigeration: Use of environmentally friendly, biodegradable HC refrigerants (CFC and HCFC-free). Control: Digital 5-inch TFT touchscreen for precise temperature control and an integrated data logger with a USB interface. Alarm System: Optical and acoustic alarms for temperature deviations, power outages, or doors left open for too long. Battery Backup: In the event of a power outage, a battery takes over the power supply to the controller to maintain temperature recording and alarms. Refrigeration: Use of natural refrigerants (such as R290 in newer models) for improved energy efficiency and environmental friendliness. Construction: Interior made of stainless steel AISI 304 for easy cleaning; rounded corners inside to meet hygiene standards. The Infrico Medcare LTF 90S has a nominal capacity of 900 liters. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 171648, turning diameter: 380 mm, spindle bore: 88 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, spindle motor power: 26,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 21 m/min, rapid traverse Z-axis: 33 m/min, total height: 2,850 mm, total length: 4,200 mm, total width: 2,000 mm, overall weight: 5,600 kg, bar passage: 77 mm, spindle nose: A2-8, center height: 1,020 mm, quill mount: MK 5, Equipment: documentation/manual, MAZAK QUICK TURN NEXUS 250 MY CNC lathe - Chuck size: 10 inches - Max. swing diameter: 675 mm - Standard turning diameter: 276 mm - Max. turning diameter: 380 mm - Distance between spindle nose and turret face: 115 - 690 mm - Load capacity including chuck: 400 KGF (chuck work), 700 KGF (bar work) - Acceleration and deceleration time: 2.3 sec - Travel range of tailstock: 550 mm - Max. thrust: 700 KGF - Number of tools (milling cutters): 12 - Tool size: max. external turning tool: 25 x 25 mm, internal turning tool diameter: 40 mm, milling drill diameter: 20 mm, milling tap: M12, shank milling cutter: 20 mm - Switching time to next/opposite position: 0.2/0.6 sec - Milling spindle speed: 25 to 4500 rpm - Rapid traverse C-axis: 40 rpm - For further technical data, see the photographed data sheet Dkedpfoz Nv H Uex Ap Deu - With technical documentation - Transport height: approx. 1850 mm Note: without bar feeder, includes the collets and tool holders shown in the pictures - some are powered. Important note: the workbench possibly shown in the pictures is not included in the scope of delivery! FCA D-01445 Radebeul - loaded onto a truck

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Binder ultra-low temperature freezer UF V 700. Internal volume: 700 L. Temperature range: -90 °C to -40 °C Dedpfxswurnvs Ap Deku Lowest energy consumption in its class High-performance cascade compression refrigeration system Environmentally friendly refrigerants R-290 and R-170 Thermal insulation with unique long-life VIPs (vacuum insulation panels) Innovative door sealing concept reduces ice formation Ergonomic door locking handle Corrosion-resistant stainless steel interior Removable inner stainless steel doors 3 flexibly adjustable stainless steel shelves Potential-free alarm contact for building alarm system integration Internal data logger, measurement values readable in open format via USB Ethernet interface 2 feedthroughs Ø 28 mm, at the rear UNUSED in original packaging Functional warranty.

Year of construction: 2020, condition: as good as new (ex-display), Demo tool: SDT 200 ASD (ATEX) Ultrasonic Multifunction Detector Set. Composed of: 1 x SDT 200 (ATEX) receiver with digital display (numeric) for static peak value detection incl. battery block Monitoring indicators for reliable diagnostics in wear monitoring: RMS. PEAK and Crest factor, integrated data logger for 4000 measurements at 500 locations (grouped by sensor, date and time) 1 x Charger 1 x Peltor Headphones 130 dB 1 x Shoulder Strap 1 x Directional Probe (Screw Tip & Rubber Tip) 1 x plastic case with insert 1 x Instruction manual on USB stick 1 x USB cable for data transfer 1 x calibration certificate (as of 02/2020) 1 x Flexible sensor Atex 550 mm with replaceable sensor head 1 x Spiral Cable 1 x Funnel Directional Probe for SDT200 1 x leakage trailer 1000 pieces (to mark compressed air leaks) Other leakage meters on request. Dodspyg Saspfx Ap Djku Visit our store. We always have a wide range of new and used compressors in stock!

Condition: excellent (used), MEMMERT ICP 600 Precision Incubator / Refrigerated Incubator Manufacturer: MEMMERT GmbH + Co. KG Type: ICP 600 Machine Type: Precision Incubator / Refrigerated Incubator Internal Volume: 256 Liters For sale is a used MEMMERT ICP 600 precision incubator with a powerful refrigeration unit and motorized air circulation in the interior. The unit is suitable for temperature-controlled applications in laboratories, research, quality assurance, and industry, as well as for incubation, storage, and testing tasks. Technical Data: Model: ICP 600 Internal Volume: 256 Liters Setting Temperature Range: 0 °C to 60 °C Operating Temperature Range: 0 °C to 60 °C Setting Accuracy: 0.1 °C Nominal Temperature: 60 °C Power Supply: 230 V / 50 Hz Current Consumption: 3.1 A Power: 700 W Protection Class: IP20 Max. Number of Sliding Shelves: 7 Max. Load per Sliding Shelf: 30 kg Max. Load per Unit: 80 kg Dimensions: External Dimensions (W × D × H): approx. 958 × 656 × 1,335 mm Internal Dimensions (W × D × H): approx. 800 × 500 × 640 mm Internal Volume: 256 Liters Equipment: Electronic PID process controller Alphanumeric text display Internal data logger Dkedpfx Apez Eh Syo Deu Program sequence control for up to 40 ramp segments Adjustable motorized air circulation Integrated weekly timer Recessed pressure/rotary encoder Optical alarm indicator Refrigeration unit with automatic hot gas defrost Stainless steel interior RS232 interface Sliding shelves as shown in the pictures Mobile base Shipping Data: Unit (W × D × H): approx. 958 × 656 × 1,335 mm Weight: approx. 144 kg Condition: Used Optical condition as shown in the pictures. Nameplate present. Scope of Delivery: MEMMERT ICP 600 Precision Incubator Sliding shelves as shown in the pictures Mobile base Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, load capacity: 2,500 kg, For sale are two overhead crane systems by Konecranes. The systems are in excellent condition and have been regularly serviced. Technical Data: - Span: 18.6 m - Crane lifting capacity: 2,500 kg - Lifting height: 3.79 m - Year of manufacture: 2000 and 2006 - Lifting speed: 5.0 / 0.83 m/min (2-speed) - Trolley travel speed: 20 m/min (infinitely variable) - Crane travel speed: 25 m/min (infinitely variable) - Runway length: 18 m MACHINE DETAILS: - Trolley weight: 211 kg - Crane weight without trolley: 1,761 kg - Rails: only 50 m available in total for both systems EQUIPMENT: - Radio remote control with push-button/master switch - Mobile pendant as emergency control - Overload protection and load data logger - Limit switches for crane and trolley travel (approach and end limits) Dsdoykbbijpfx Ap Deku - Signal horn, charging station, and spare battery - Main conductor line (make: Akapp, 50A, length: 18 m) - Includes main switch and mounting brackets (clamped version) The offer is made for one system only, unless a combined offer for both is explicitly requested. Transport and loading can be organized at an additional cost. Europe-wide delivery available. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.