Used Depaneling Assembly Workstation for sale (4,311)

Condition: ready for operation (used), BJZ NTM 300 SL Depaneling Machine Equipped with PC, Matrix-2000, ionization fans, and LED lighting. Maximum separation length: 300 mm Lredpfxoxgda Se Akmju Weight: approx. 110 kg Operating pressure: 6 bar Space requirements: 1250 mm x 900 mm x 2150 mm (W x D x H) Weight: approx. 336 kg You are welcome to arrange a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be prepared, provided you have a valid VAT identification number. Subject to prior sale. Visit our shop and also view our other offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and remain reserved.

Condition: used, MDS Type: MDS A220-PD MDS A220-PD Manual Assembly Station The A220-PD assembly system is a stationary manual assembly station for processing press-in components. Intended use: The machine is used for pressing in fastening elements. The operator manually places the corresponding screws, plastic nuts, and the component to be processed into the machine. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fastening elements: Press-in nut, rivet nut, self-piercing nut, press-in pin, punch pin / rivet pin Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connection plug HAN 10, not wired Temperature ranges: Transport: -20°C to +60°C Operation: +10°C to +40°C Storage: -20°C to +50°C Compressed air connection: Operating pressure: 6 bar Quality: Treated, water-free, and oil-free air Connection: 1/2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Lrodpfezgr I Rsx Akmsu Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fastening elements are pressed in automatically. Movements are only initiated when the operator presses the foot pedal, thus triggering the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Lrodpozx D Tcsfx Akmou Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: excellent (used), Year of construction: 2026, The ST-1900 universal semi-automatic pallet assembly table is a simple and cost-effective version of a semi-automatic production station, designed for companies that want to achieve a higher level of efficiency while maintaining low investment costs. The table is equipped with a pneumatic pallet lifting system and pneumatic combs for positioning the horizontal boards, which significantly simplifies and speeds up the operator's work. By maintaining a simple and uncomplicated table design, manual effort is reduced and the ergonomics of the workstation are improved. Lodozgc Smepfx Akmeru Despite the use of pneumatics, the Pneumatico ST-1900 remains a device in the basic segment – it is an economical solution for small and medium-sized manufacturers who need to increase production repeatability and speed. The table allows for flexible work with popular pallet formats and is suitable for both the production of disposable pallets and standard pallet designs for less demanding customers.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 213, Atla Coop - Schuco CC120A Lrjdpfjxvnwtex Akmju Compact corner crimping machine. Various assembly steps can be efficiently implemented at just one workstation: punching the frame, milling the glue holes and injecting the glue into one or two-chamber profiles. The option to switch off the cutter and adhesive injection makes the machine universally applicable for different aluminium profiles, and manual controls for the cutter and pump facilitate handling. Equipped with Schuco knives, Schuco bracing clamp, triangular support benches, user manual.

Condition: used, Year of construction: 2016, operating hours: 1,171 h, functionality: fully functional, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, teach pendant model: FlexPendant, ABB IRB 4600-60/2.05 – 6-axis industrial robot with IRC5 controller and FlexPendant The ABB IRB 4600-60/2.05 industrial robot is designed for demanding production applications and process automation. Its 60 kg payload capacity and 2050 mm reach provide high dynamic performance, high rigidity, and excellent positioning accuracy. The offered set comes from the research and development (R&D) department and includes a complete system ready for integration. The robot is ideal for applications such as: - CNC machine tending, - transferring and manipulating parts, - assembly, - packaging, - palletizing, - vision systems, - grinding and surface finishing, - R&D workstations. The set includes: - ABB IRB 4600-60/2.05 robot, - ABB IRC5 controller, - ABB FlexPendant operator panel, - complete set of robot cables. The robot has the following licenses: Advanced Robot Motion, Absolute Accuracy, PROFINET Controller/Device, World Zones, Independent Axis, Path Recovery, Path Offset, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, Sensor Interface, UDPUC Driver, Externally Guided Motion (EGM). Technical condition The robot starts up correctly and communicates with the IRC5 controller. The operator panel displays message 38200 – Battery backup lost. This indicates a loss of power to the battery that supports the encoders (SMB Battery). This is a typical message after the battery has been discharged or disconnected and does not indicate a defect in the robot. After replacing the battery, a calibration/axis synchronization procedure will be necessary. Duty Time Counter: 1171 h Specification Manufacturer: ABB Model: IRB 4600-60/2.05 Lrjdpfozkbpfox Akmou Year of manufacture: 2016 Payload: 60 kg Reach: 2050 mm Number of axes: 6 Controller: IRC5 Operator panel: ABB FlexPendant RobotWare: 6.08.00.01 Condition: used We provide a start-up guarantee.

Condition: excellent (used), Year of construction: 2013, operating hours: 404 h, functionality: fully functional, machine/vehicle number: 500897, load capacity: 6 kg, arm reach: 901 mm, controller manufacturer: KUKA, controller model: KR C4 Compact, teach pendant manufacturer: KUKA, teach pendant model: SmartPad, KUKA KR 6 R900 sixx FLR with KR C4 Compact controller and SmartPad The robot will be delivered with new memory backup batteries. The replacement has already been scheduled and will be carried out before the device is handed over to the new owner. Complete robotic workstation based on the KUKA KR 6 R900 sixx FLR industrial robot, along with the KR C4 Compact controller and SmartPad operator panel. The robot comes from a research and development environment and was used for laboratory and testing work. As a result, it has very low operating hours, approximately 404 hours, which is a small number compared to robots operating continuously on production lines. Specifications: Manufacturer: KUKA Model: KR 6 R900 sixx FLR Payload: 6 kg Reach: 901 mm Lodsziczmjpfx Akmeru Number of axes: 6 Year of manufacture: 2013 Controller: KUKA KR C4 Compact Operator panel: KUKA SmartPad Operating hours: approx. 404 h Application The robot is ideal for applications such as: automation of production processes, assembly stations, CNC machine operation, vision systems and machine vision, quality control, research and development laboratories, education and training in the field of robotics. Technical condition The device comes from a research and development laboratory. The visual condition is very good. The robot starts up and communicates with the controller. Before shipment, the device undergoes additional technical verification. Included: - KUKA KR 6 R900 sixx FLR robot, - KUKA KR C4 Compact controller, - SmartPad operator panel, - complete set of cables, - mounting base. Additional equipment It is possible to equip the workstation with: - pneumatic and electric grippers, - vision systems, - safety fences, - safety gates, - light curtains, - additional industrial automation components. More information on tobesold.eu Product covered by a start-up warranty.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: R22X00F44, overall weight: 41 kg, load capacity: 20 kg, arm reach: 1,418 mm, We offer this like-new FANUC CRX-20iA/L cobot – 20 kg / 1,418 mm – year of manufacture 2022 – collaborative robot. For sale is a FANUC CRX-20iA/L collaborative 6-axis robot manufactured in October 2022. The CRX is ideally suited for flexible automation tasks and is particularly characterized by its 20 kg payload and 1,418 mm reach. Due to its collaborative design, the robot can also be used for modern human-robot workstations, depending on the application and risk assessment. Technical data Manufacturer: FANUC Type: CRX-20iA/L Year of manufacture / Production date: 10/2022 Payload: 20 kg Reach: 1,418 mm Robot weight: 41 kg FANUC type: A05B-1702-B212 Collaborative 6-axis industrial robot Compact design Large reach with high payload The robot is currently mounted on a mobile aluminum profile base, which allows for very flexible use in trials, demonstrations or different production tasks. As can be seen in the pictures, a pneumatic suction gripper/handling unit is currently additionally mounted on the robot. The exact scope of delivery can be agreed upon if desired. Typical applications The FANUC CRX-20iA/L is suitable for, among other things: Pick & Place Machine loading and unloading Palletizing and depalletizing Ljdpszzkghjfx Akmsru Part handling Assembly tasks Packaging automation Inspection and measuring tasks Handling of containers, boxes or components Flexible production and automation tasks The CRX is particularly interesting for companies looking for a flexible robotics solution that can be easily integrated into existing processes. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100264-11 / AA100264-12, travel distance X-axis: 2,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 635 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 920 mm, feed length Z-axis: 635 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Siemens, controller model: 840 D, overall weight: 28,000 kg, spindle speed (min.): 20,000 rpm, spindle speed (max.): 20,000 rpm, spindle motor power: 25 W, number of spindles: 2, number of slots in tool magazine: 31, Equipment: chip conveyor, documentation/manual, BAZ and extrusion profile system for the production of car sill profiles consisting of: *Machining machines: - Anger machine SP2-X2000 (machine number AA100264-11) - Anger machine SP2-X2000 (machine number AA100264-12) - 2x coolant treatment units *Subassembly assembly (robot cell for sills): - Robot 1 KUKA KR120 R3200 PA - Gripper for robot 1 - Labeling station - Robot 2 KUKA KR120 R3500 - Gripper for robot 2 - Interface robot/machining center - Cleaning unit for components - Assembly machine, 2 lines - Robots 3 and 4 for handling - Drawer system with component inserts - Screwing station - Adhesive application station - Platform - Robot 5 - Gripper for robot 5 Ledoyzh Ulepfx Akmeru - Pallet placement station - Safety enclosure - Electrical control and integration Further information and videos available upon request.

Year of construction: 2020, condition: like new (used), functionality: fully functional, MED-CONT MODULAR SYSTEM Originally custom-built for medical device manufacturing, the MED-CONT Modular System is a turnkey, relocatable modular technical facility offering approximately 100 m² of high-quality laboratory, production and office space. The system is ideally suited for: Medical device manufacturing Biotechnology and life science companies Electronics manufacturing and assembly Research & Development (R&D) centres Universities and research institutes Start-ups and scale-up companies Pilot production and prototyping Lredpfjznmvrex Akmsu Quality control and testing laboratories Pharmaceutical manufacturing support Clean assembly and light manufacturing Contract manufacturing (CMO/CDMO) Engineering and automation companies Humanitarian and disaster response projects Military medical and technical field operations Mobile laboratories and temporary technical facilities The system comprises three 40' High Cube CARU ISO technical containers and one 20' office/administration container, providing a fully integrated and relocatable working environment that can be deployed wherever high-quality technical space is required. Key Features Approx. 100 m² modular technical facility 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Fully insulated construction Heating and air conditioning (HVAC) 220 V / 380 V EU electrical installation High-quality LED lighting Ethernet network infrastructure Indoor-stored, outdoor-deployable Modular configuration – containers can be connected or operated individually Built in 2020 Excellent condition Fully functional Typical Applications Medical device manufacturing Electronics assembly Laboratory operations Pharmaceutical applications Research & Development Pilot production Start-up manufacturing Quality control laboratories Corporate innovation centres Technical training facilities Mobile production facilities Mobile technical support centres Humanitarian and disaster response projects Military field laboratories Office Container The integrated office container provides a comfortable administrative workspace featuring: Office area for up to four workstations Meeting table for 5–6 people Heating, cooling and Ethernet network connection Ideal for administration, engineering, project management and customer reception Included in the Sale The sale includes the complete MED-CONT Modular System, consisting of: 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Additional laboratory, production and utility equipment is available by separate negotiation. Business Advantage The MED-CONT Modular System represents a cost-effective alternative to constructing or refurbishing conventional laboratory and technical facilities. It enables organizations to establish high-quality laboratory, production and office space within a fraction of the time required for traditional construction, while maintaining the flexibility to relocate or expand the facility as operational needs evolve.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, Container and carton conveyor technology for e-commerce: Itoh Denki ordered and implemented by Rollo-Teufel. The conveyor line contains 5 workstations equipped with a computer, barcode scanner, and weight scale. The transport system comprises 3 levels of conveyor rollers. Each level has a motor for transporting goods, located in the rollers (24V), and sensors for position detection. The conveyor line is assembled from modular units. The units are connected with 4 screws (M8). The drive motors are powered by central INTERROLL modules, 5 pieces: MC 1-4 DR1FA2 MC 5-8 DR1FA3 MC 10-13 DR1FA4 MC 14-20 DR1FA5 MC 21-24 DR1FA36 Ljdpfx Ajzz Ir Ijkmeru

Condition: used, Technical Commercial Datasheet – Integrated KAESER CSDX 165 T Air Compressor Station Lrsdpfx Aozcaufekmju Manufacturer KAESER KOMPRESSOREN (Coburg, Germany) Type Complete "All-in-One" industrial compressed air station, featuring a fluid-injected rotary screw air compressor with variable speed control (CSDX Series), an integrated refrigeration air dryer (Module T), and an advanced SIGMA CONTROL 2 electronic monitoring configuration. Industrial Applications Continuous, high-efficiency plant air generation for automated manufacturing facilities, heavy assembly lines, packaging plants, plastics processing, and automotive industries. The variable speed drive system matches actual compressed air consumption in real time, eliminating peak starting currents and optimizing plant energy performance. Key Technical Specifications * Main Compressor Unit: KAESER CSDX 165 T (CSDX Series / Integrated Dryer Version) - Technology: Fluid-injected rotary screw compressor featuring premium SIGMA Profile rotors - Regulation System: Variable speed control via an integrated frequency inverter (SFC / Sigma Frequency Control) - Nominal Motor Power: 90 kW - Air Flow Range: Dynamic adjustment based on plant load profile (up to approximately 16.15 m3/min maximum capacity) - Maximum Working Pressure: 8.5 bar max (Current digital setpoint displayed: 7.5 bar) - Integrated Air Dryer (Module T): Refrigeration air dryer utilizing eco-friendly R-513A refrigerant (2.6 kg charge), with a maximum pressure of 32 bar on the cooling circuit side. - Electrical Requirements: 400 Volts / 3-Phase / 50 Hz - Control Interface (SIGMA CONTROL 2): - Total running hours: 26,805 h - Hours under load: 15,272 h - Current system pressure: 0.00 bar (at standstill) / Internal package temperature: 24 °C Machine Utilization This KAESER CSDX 165 T workstation draws ambient atmospheric air and compresses it through its high-efficiency 90 kW fluid-injected screw airend. The frequency inverter continuously regulates the engine speed to prevent the unit from wasting power during low-demand windows. Saturated, hot compressed air exiting the screw block is directed straight into the built-in refrigeration dryer module (Module T). The dryer chills the air stream down to its pressure dew point, condensing and safely discharging moisture to deliver clean, dry, and precisely regulated air to the factory floor line. System Highlights * Compact All-in-One Workstation Footprint: By enclosing the compressor and the refrigeration dryer unit inside a single acoustically insulated cabinet, the station significantly reduces necessary floor space, transport overhead, and engineering installation costs. - SFC Variable Speed Energy Efficiency: The dynamic matching of motor output to actual pneumatic network demand ensures a highly optimized electrical power factor and an exceptionally competitive cost per cubic meter of air. - Intelligent SIGMA CONTROL 2 Management: This interface monitors all critical operating metrics (pressions, temperatures, and maintenance schedules), ensures advanced industrial network compatibility, and confirms a healthy machine history with low un-loaded idling hours (only 43% idle time relative to total run metrics). - Future-Proof Eco-Refrigerant: The integration of R-513A refrigerant meets strict international F-Gas environmental guidelines, securing the long-term operational legality of the cooling loop without risks of sudden regulatory phase-outs.

Condition: excellent (used), I offer a Siemens SIMATIC Mobile Panel 177 PN, a mobile operator panel designed for professional applications in industrial automation. The device provides convenient operation and control of machines and production lines from a portable operator panel. Technical specifications: • Manufacturer: Siemens • Model: SIMATIC Mobile Panel 177 PN • Catalog number: 6AV6645-0BB01-0AX0 • Communication interface: PROFINET (PN) • Color TFT touchscreen • Programmable function keys F1–F14 • Built-in manipulator / control knob • Long connection cable with a multi-pin industrial connector • Made in Austria Condition: • Used item • Screen without cracks or mechanical damage • Normal signs of use and storage are visible • Housing in good technical condition • Sold as is, according to the condition shown in the pictures • Full testing is not possible – sold as untested Application: • CNC machining centers • Production lines • Industrial robots • Siemens SIMATIC automation systems • Assembly and production workstations Lrjdpfxez Sm I Aj Akmou Included: • Siemens SIMATIC Mobile Panel 177 PN • Original connection cable with an industrial connector

Condition: like new (used), functionality: fully functional, machine/vehicle number: 94447285, Year of construction: 2023, lifting height: 4,000 mm, chain length: 4,000 mm, load capacity: 500 kg, lifting speed: 75 mm/s, fine lifting speed: 18 mm/s, power: 0.49 kW (0.67 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, For sale is a like-new, immediately ready-for-use Demag electric chain hoist, including a matching aluminum track (3.8 m), trolley, and a professional Demag wireless remote control. The system was manufactured in June 2023 and is in excellent, well-maintained condition. Technical data (chain hoist): Model: Demag DC-COM 5-500 (1/1 H4 V4.5/1.1) Year of manufacture: 06/2023 Load capacity (SWL): 500 kg (0.5 t) Hook travel / chain length: 4.0 m (4000 mm) Lifting speeds: 4.5 m/min (main speed) / 1.1 m/min (fine lifting speed) Motor power: 0.49 kW / 0.10 kW Operating voltage: 3 ~ 380–415 V / 50 Hz Protection class: IP 55 Features & scope of delivery: Demag electric chain hoist with chain and load hook Aluminum track (length: 3.8 m) including trolley Demag wireless remote control (handheld transmitter) for precise and wireless operation Including the corresponding charging unit/power supply and connection cable Lodpfjzxg T Esx Akmeru Ideally suited for workshops, warehouses, or assembly workstations where precise and safe lifting is required. Inspection is possible by arrangement.

Condition: new, power: 382 kW (519.37 HP), fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: automatic, Year of construction: 2026, Equipment: EBS, electric window regulation, electronic stability program (ESP), onboard computer, - Heated mirrors - Leaf spring suspension - PTO EUROMIX TO GO – immediately available new vehicles from stock in Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. EuromixMTP 10 cbm mixing semi-trailer TGS 18.520 4x2H BL SA HydroDrive Diesel engine MAN D2676 LFAX, 382 kW (520 hp) power output, 2,650 Nm torque, Euro 6e Transmission MAN TipMatic 12.28 OD MAN HydroDrive, hydrostatic axle drive Axle ratio, i=3.63 Cruise control ACC Stop and Go, distance-regulated Emergency braking assistant EBA Plus - turning assist Fifth wheel coupling JOST JSK 37 C 2 inch MAN Media System Advanced Navigation 7 inch Driver's workstation package Premium with electric front windshield sun visor Front axle tires Goodyear 385/65R22.5 OMNITRAC S HL steering + G TL Rear axle tires Goodyear 315/80R22.5 OMNITRAC D drive + G TL EuromixMTP 10 cbm mixing semi-trailer - New - 2-axle - SAF axles - 1x lift axle - air suspension ABS - Tires 385/65 R22.5 - Total weight approx. 36,000 kg - Unladen weight approx. 7,640 kg EuromixMTP - concrete mixing drum EM 10 L - lightweight construction Model: EM 10 L Nominal volume 10m³ ready-mix concrete Mixing drum in lightweight construction Mixing drum in lightweight design made of HARDOX S450 material Mixing spirals in lightweight design made of HARDOX S500 material Gearbox manufacturer ZF P5300 Hydraulic pump manufacturer Bosch Rexroth Hydraulic motor manufacturer Bosch Rexroth Oil cooling system integrated Mixing control mechanical and start/stop electrical Compressed air water system Water connection on the standing platform with hose line Water filling line, one-sided with C-coupling Mixing drum with one service flap Ladder with standing platform Rubber attachment on the filling hopper Swiveling, single-arm discharge chute made of steel Wear plates in the filling hopper, discharge chute and swiveling chute Drum lock for securing the drum during maintenance Polyurethane primer Weight approx. 3,650 kg, deviations +/- 5% with emergency stop function according to EU safety technology Steel fenders over the rear axles 2x extension gutters made of steel or plastic Water system Water tank 500l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line Water connection "C" coupling Lrjdpfx Asz R Tpqjkmou Operation & Electrics Mixer operation - mechanical at the rear Start-stop system (with EDC) Your advantages • Immediately ready for use: concrete pumps, concrete mixers, dump trucks, roll-off tippers • Chassis, superstructure and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contact persons • Denis Omeragic: German, English, Bosnian, Croatian, Serbian) • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, Arabic) • Olga Tissen: (German, Russian) • Karolina Cyburt: (Polish) EuromixMTP GmbH, Gänsekamp 7, 32457 Porta Westfalica Year of construction: 2026 Front axle: Steered Number of cylinders: 6 GVW: 18,000 kg...

Condition: new, Year of construction: 2020, functionality: fully functional, conveyor belt length: 4,400 mm, conveyor belt width: 1,200 mm, conveyor belt speed: 100 mm/s, total length: 4,700 mm, total width: 1,450 mm, total height: 950 mm, discharge height: 950 mm, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: SEW, Equipment: documentation/manual, type plate available, Continuous conveyor, accumulating, linking belt between 2 stations -- Unused, from a project that was not realized -- Original assembly instructions and documentation available. System description ALTRATEC and technical data: The transfer system is preferably used in series production for material flow design and for loosely linking manual/automatic workstations and manual/automatic work stations using workpiece carriers (WPCs). The workpiece carriers are transported using the accumulating roller principle. On the sections between the various workstations, the workpiece carriers can be buffered. In the upper and lower runs, the workpiece carriers can be stopped at any point. In the area of the deflection points, the transport takes place with a positive locking mechanism. At the manual workstations or automatic stations, the WPCs are stopped, if necessary, pre-separated, and positioned. The end workpiece carrier deflection points must be secured against manual intervention in the area of manual workstations by means of safety devices. In the area of automatic handling devices, these are usually secured with the safety device of the handling device. At the end of the line, the WPCs must be checked for their loading status. Only empty WPCs may be released for circulation into the return line. Technical data: - Conveying medium: Accumulating conveyor with accumulating roller chain on both sides, - Conveying speed: Accumulating conveyor approx. 6 m/min, - Total length: Accumulating conveyor approx. 4,400 mm, - Overall length, including deflection radii, approx. 4,700 mm, - Overall width: Conveyor system without motor approx. 1,200 mm, - Overall width: Conveyor system with motor approx. 1,450 mm, - Transport height: Top of WPC approx. 950 mm, adjustable +/- 30 mm, - Support system: ALTRAPROFIL, - Workpiece carrier (WPC): Length: Basic workpiece carrier 220 mm, Width: 1,050 mm, Number: 17 x above and 1 x below, Weight: Including basic WPC / workpiece holder with holders and component complete, max. 50 kg / per WPC, - Positioning accuracy: Loading automatically +/- 0.15 mm on the WPC, - Positioning accuracy: Unloading automatically +/- 0.15 mm on the WPC Electrical equipment: - Motor: Accumulating conveyor 400 V, 50 Hz / SEW with Harting connector, Lrodpfxjz Hklfo Akmou - ProfiNet - Sensors: For separator/stopper, WPC query M12 / M18 – IPF electronic, light barriers for workpiece detection - Electrical and pneumatic installation: On E/A modules ET200, on valve manifold CPV14… Mechanical equipment: - 1 piece: Conveyor section, approx. 4,400 mm long, consisting of conveyor profiles, including steel supports for accumulating roller chain in ALTRATEC standard design, with automatic and two-sided spring tension. Two Vulkollan rollers on the chain tension side – when starting up. - 4 pieces: Supports, heavy-duty, made of ALTRAPROFIL with adjustable feet, foundation fastening angles without dowels, for a conveyor height of approx. 950 mm (top of WPC), - 6 pieces: Stop station with 2 separators/stoppers each, lightweight design, arranged in parallel, pneumatically actuated, closed and single-acting when not actuated. Both positions are queried. Design 2 x with integrated backflow lock, - 1 piece: Permanent chain lubrication. Perma Classic with two lubrication points integrated into the longitudinal profiles, - 10 pieces: WPC queries on the conveyor section, 2 pieces component checks as a light barrier with reflector. The conveyor can be inspect

Condition: new, Year of construction: 2024, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! The system was purchased in 2024 and has not yet been put into operation due to an order backlog! The new price of the system was €672,000 plus VAT! According to the documentation, the system’s production started in 2023. The final assembly took place in 2026. The video is an example video. It does not show the actual system that is for sale! The system has the following configuration: TECHNICAL DETAILS Storage type: Single-deep storage, double-deep Total capacity: approx. 4,540 containers Permissible container weight: 30 kg per container Block on the picking side Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 1,974 Storage locations for 170 mm boxes: 276 Block on the back of the storage Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 2,020 Storage locations for 170 mm boxes: 276 Rack and pinion stacker crane Type: AP 31 including double-deep feed table Direction of movement: Horizontal Acceleration: max. 3.5 m/s² Speed: max. 3.5 m/s Box feed Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m Pneumatic stopper, side: 1 piece Drive: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Emergency stop button: 1 piece Box storage Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m RollerDrive element: 1 piece Pneumatic stopper, side: 1 piece Drive: 1 piece Control of the RollerDrive element: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Express retrieval Gravity roller track: 1.3 m Substructure for storage stiffening: 2 pieces Lrsdpfxez Agwfs Akmju Special feed RollerDrive element: 1 piece Substructure for storage stiffening: 2 pieces Control of the RollerDrive element: 1 piece Pick by Light workstation RollerDrive element: 1 piece Projector: 1 piece Superstructure for storage stiffening: 1 piece Control of the RollerDrive element: 1 piece Projector control: 1 piece Further technical details can be found in the attached offer.

Condition: new, Year of construction: 2026, CORMAK H600SA Automatic Metal Band Saw The CORMAK H600SA automatic metal band saw is designed for cutting materials intended for further machining and production processes. The maximum cutting capacity is 600 × 600 mm. As a manufacturer, we offer this machine to metalworking facilities and companies looking to incorporate automatic cutting into their production operations. Lrodpj Ad Auaefx Akmeu Key Advantages of the CORMAK H600SA - Maximum cutting capacity of 600 × 600 mm – an important parameter when selecting a band saw to match the dimensions of the materials to be processed. - Three cutting speeds – allow the operating speed to be selected according to the requirements of the planned cutting process. - Designed for solid materials – suitable for preparing material sections for subsequent production operations. - Saw blade dimensions of 6620 × 54 × 1.6 mm – the specified dimensions facilitate the selection of compatible replacement blades and planning the purchase of spare blades. Band Saw for Solid Materials – Applications The CORMAK H600SA band saw for solid materials is designed to cut raw stock into sections required for individual production orders. The cut material can then proceed to subsequent operations, such as drilling or component assembly, according to the production process used at the facility. This metal band saw is suitable for both in-house material preparation and contract machining services. When selecting a band saw, it is important to compare the maximum cutting capacity with the dimensions of the materials to be processed and the requirements of the planned operations. Before discussing machine selection, it is advisable to prepare an overview of typical cutting tasks, including material types, dimensions, and required cutting lengths. This makes it easier to evaluate the H600SA's specifications in relation to the specific requirements of the workstation. Three Cutting Speeds and Blade Selection The H600SA offers three cutting speeds: 27, 45, and 69 m/min. When selecting the appropriate speed, consider the requirements of the material being processed and the recommendations for the saw blade being used. The available speed settings can be compared with the planned technological requirements before purchase to assess their suitability for the tasks performed at the facility. The band saw uses a blade measuring 6620 × 54 × 1.6 mm. When ordering a replacement blade, make sure all three dimensions match. Providing the complete blade dimensions in your inquiry makes it easier to select a dimensionally compatible replacement. It is also advisable to specify the type of material to be cut to ensure the appropriate blade is selected for the intended application. Main Drive, Hydraulics, and Cooling System The main motor has a power output of 5.5 kW. The hydraulic power unit motor has a power output of 1.5 kW, while the coolant pump has a power output of 0.125 kW. Technical Specifications of the CORMAK H600SA Maximum cutting capacity 600 × 600 mm Cutting speeds 27, 45, 69 m/min Saw blade dimensions 6620 × 54 × 1.6 mm Main motor power 5.5 kW Hydraulic power unit motor power 1.5 kW Coolant pump power 0.125 kW

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, warranty duration: 12 months, total length: 7,500 mm, total height: 700 mm, total width: 3,600 mm, BOOSTON ER-02/750 – STATIONARY ASSEMBLY TABLE, 7.5 m, FOR PREFABRICATION OF HOUSES BOOSTON MACHINERY is a manufacturer of machines and equipment for prefabricated house plants. We produce stationary assembly tables, rotary tables, butterfly tables, and complete production lines for the prefabrication of timber structures. ## TECHNICAL SPECIFICATIONS ➡️ Working length of the table: 7500 mm Other available lengths: 3.0 m / 4.5 m / 6.0 m / 7.5 m / 9.0 m / 10.5 m / 12.0 m / 13.5 m / 15.0 m ➡️ Working height of the table: 700 mm (adjustment ±50 mm) ➡️ Working width of the table: 3600 mm – other widths can be manufactured ➡️ Height range of the prefabricated wall using the SD-01 clamping cylinder: 600–3400 mm ➡️ Vertical locking pins: 0–240 mm, diameter 35 mm (adjustable) ➡️ Horizontal transport of finished elements – optional: set of pneumatically lifted rollers – 2 rows of rollers at the edges of the table ➡️ Table type: stationary table ➡️ Pneumatic supply: 8 BAR – for the ER-02R version equipped with rollers for horizontal transport ➡️ Maximum permissible load: 100 kg/m² of finished prefabricated element, with a maximum element height of 3000 mm Ljdpfx Aoztpwpekmjru ## ADDITIONAL OPTIONS 1. SD-01 clamping cylinders 2. Set of pneumatically lifted rollers from the table surface – 2 rows of rollers BOOSTON ER-02 The ER-02 stationary assembly table is a versatile workstation designed for the prefabrication of walls and other elements in timber frame construction. The modular design of the work platform allows for expansion of the workstation and connection to other BOOSTON assembly and rotary tables, creating a complete production line. The ER-02 table is available in lengths from 3 to 15 meters. The standard work area, along with the support, enables the prefabrication of elements up to 3400 mm in height using the SD-01 clamping cylinders. We manufacture our machines in Poland. Manufacturer: BOOSTON MACHINERY

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total length: 6,100 mm, total width: 3,600 mm, BOOSTON MACHINERY is a manufacturer of machines and equipment for prefabricated house factories. We produce stationary assembly tables, rotary tables, butterfly tables, and complete production lines. TECHNICAL DATA -> Working table length: 6000mm; other lengths available on request: 3.0m; 4.5m; 6.0m; 7.5m; 9.0m; 10.5m; 12m; 13.5m; 15.0m -> Working table height: 700mm (adjustment +/- 50mm) -> Working table width: 3600mm (adjustable) -> Height range for prefabricated wall using SD-01 clamping cylinder: 600-3400mm -> Vertical locking pins: 120 - 200 mm (35 mm diameter) -> Horizontal transport of finished elements (Optional): Set of pneumatically lifted rollers - 2 lines at the edges of the table -> Table drive: Stationary table -> Pneumatic power supply - 8 BAR for ER-02R version (with rollers for horizontal transport) -> Maximum permissible load - 1m2 of finished prefabricated element (assuming max height of 3000mm): 100kg / 1m2 OPTIONAL EQUIPMENT 1. SD-01 clamping cylinders 2. Set of pneumatically lifted rollers with table surface (2 lines of rollers) The ER-02 stationary assembly table is a universal workstation for prefabricating elements in a wooden frame structure. The modular design of the work platform is designed to allow expansion and connection with other rotary tables to create a complete production line. Lsdpfxovv Rv As Akmeru The stationary assembly table is available in lengths from 3m to 15m, with a standard working area width of 300cm + a 60cm long steel support, allowing for the prefabrication of elements up to a maximum height of 340cm using SD-01 clamps.

Year of construction: 2026, condition: new, Mobile workshop cabinet on wheels – Karnatech mobile workstation A professional, steel workshop cabinet on wheels from the Polish brand Karnatech. This device combines the functions of a mobile tool cabinet, a stable workbench, and an ergonomic workstation. It is an ideal solution for production halls, workshops, service centers, and technical facilities with high operating intensity. We are a direct manufacturer – all components are produced in our facilities, which guarantees the highest quality and the possibility of full customization. Key advantages and features: Solid worktop: Made of water-resistant, lacquered plywood – resistant to moisture and dirt, easy to clean (quick replacement possible). Durable steel construction: Resistant to industrial loads, mechanical damage, and harsh working conditions. Mobility and stability: A system of stable feet with an optional wheel extension – allows for easy transport and secure positioning at the workstation. Customization options: any configuration of drawers, shelves, doors, and handles Adjustment of external dimensions to the customer's requirements Any color from the RAL palette Applications: Mobile assembly/service point in a production hall Storage and organization of tools, power tools, and components Ergonomic workstation in a workshop Lode Ady Rxopfx Akmeru Technical data: Condition: New (made to order) Width: 1000 mm Depth: 500 mm Height: 2090 mm Weight: 182 kg Construction: Steel / Water-resistant plywood

Condition: used, functionality: fully functional, Year of construction: 2000, overall weight: 1,000 kg, total height: 3,500 mm, load capacity: 2,500 kg, throat depth: 5,000 mm, working height: 3,000 mm, DGUV certified until: 06/2025, Equipment: documentation/manual, Column-Mounted Jib Cranes & Wall-Mounted Jib Cranes TAUCHA / DEMAG / LIFTKET – 50 kg to 2,500 kg – Electric Chain Hoist – Multiple Systems Available For sale are several column-mounted and wall-mounted jib crane systems from Mechanik Taucha Fördertechnik GmbH, Demag, and Liftket. The systems offer a load capacity range from approximately 50 kg up to 2,500 kg, making them suitable for use in workshops, manufacturing plants, assembly workstations, as well as in in-house logistics. Some of the cranes are designed as classic column-mounted jib cranes with a single jib arm, while select models feature a double-jib column design, allowing coverage of two separate working areas. All cranes are equipped with electric chain hoists and trolley carriages, operated via pendant controls. The systems can be purchased individually. Inspection by appointment is possible. Taucha Column-Mounted Jib Crane – Load capacity 2,500 kg Heavy-duty column-mounted jib crane with floor-mounted steel column and jib arm for industrial lifting and assembly applications. Taucha Column-Mounted Jib Crane – Load capacity 2,000 kg Column jib crane with pivoting jib for material handling in production and assembly areas. Taucha Column-Mounted Jib Crane – Load capacity 1,600 kg Industrial crane with column base and pivoting jib, suitable for medium to heavy loads. Taucha Column-Mounted Jib Crane – Load capacity 1,250 kg Column jib crane with jib arm and trolley for precise material movement. Ledpfx Akeyt Hc Demsru Taucha Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with electric chain hoist and pivoting jib for assembly workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 1,000 kg Column jib crane with Liftket electric chain hoist, suitable for industrial lifting operations. Taucha Column-Mounted Jib Crane – Load capacity 800 kg Column jib crane with pivoting jib and trolley, ideal for workshop and production areas. Taucha Column-Mounted Jib Crane – Load capacity 800 kg (Double Jib) Column jib crane with two opposing jib arms, suitable for servicing two workstations. Taucha / Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with electric chain hoist, ideal for lighter lifting tasks. Liftket Column-Mounted Jib Crane – Load capacity 500 kg Column jib crane with Liftket chain hoist and pivoting jib. Demag Wall-Mounted Jib Crane – Load capacity approx. 315 kg Wall-mounted jib crane with Demag electric chain hoist, suitable for workstations with limited space. Taucha Column-Mounted Jib Crane – Load capacity 250 kg Compact column-mounted jib crane for light loads. Taucha Column-Mounted Jib Crane CS KD 250-6 – Load capacity 250 kg Column-mounted jib crane with pivoting jib and electric chain hoist. Liftket Column-Mounted Jib Crane – Load capacity 250 kg Column jib crane with Liftket electric chain hoist for assembly tasks. Taucha Column-Mounted Jib Crane – Load capacity 200 kg Column jib crane for light material handling. Taucha Column-Mounted Jib Crane – Load capacity 125 kg Lightweight column jib crane for smaller components and tools. Taucha Column-Mounted Jib Crane – Load capacity 100 kg Compact workshop crane for light loads. Taucha Column-Mounted Jib Crane – Load capacity 50 kg Very light jib crane for small lifting applications.

Condition: new, Year of construction: 2026, functionality: fully functional, arm reach: 955 mm, type of input current: AC, total height: 955 mm, total width: 955 mm, total length: 955 mm, load capacity: 5 kg, control cabinet length: 5 mm, overall weight: 35 kg, input voltage: 230 V, type of cooling: air, protection type (IP code): IP62, FAIRINO COBOTS – MODERN AUTOMATION FOR YOUR BUSINESS We offer advanced FAIRINO collaborative robots (cobots) designed to increase productivity, improve quality, and enhance safety in manufacturing processes. Thanks to their intuitive operation, fast deployment, and excellent price-to-performance ratio, FAIRINO cobots are the ideal automation solution for small, medium-sized, and large enterprises. Why Choose FAIRINO Cobots? ✅ Safe human-robot collaboration without the need for expensive and complex safety fencing. ✅ Easy programming through hand-guiding, graphical programming, and a user-friendly interface. Lodpfx Aezaz Eyekmjru ✅ Fast return on investment through process automation and 24/7 operation capability. ✅ High precision and excellent repeatability for demanding industrial applications. ✅ Compact design that allows operation even in limited production spaces. ✅ Easy integration with vision systems, grippers, CNC machines, AGVs, and other automation equipment. Available Models The FAIRINO FR Series includes collaborative robots with payload capacities ranging from 3 kg to 30 kg, allowing the perfect solution for virtually any industrial application. Available models: • FR3 • FR5 • FR10 • FR16 • FR20 • FR30 Typical Applications • CNC machine tending • Welding and spot welding • Assembly and fastening operations • Packaging and palletizing • Quality inspection • Pick-and-place applications • Dispensing and gluing • Sorting and order fulfillment • Logistics and material handling automation Benefits for Your Business FAIRINO cobots help reduce production costs, increase operational efficiency, and improve process consistency and product quality. Their flexibility allows them to be quickly redeployed between workstations and adapted to new tasks, making them an ideal solution for modern Industry 4.0 manufacturing environments. Warranty and Support ✔ 12-month distributor warranty. ✔ Professional technical support and service coverage throughout Europe. ✔ Assistance with implementation, configuration, and integration into existing production processes. Contact us today to find the right FAIRINO cobot for your application and receive a customized automation solution tailored to your business needs.

Condition: used, Year of construction: 2023, Assembly Station Manufacturer: PROZAP Lodozbvmhopfx Akmjru Type: EK0 Assembly line station Year of manufacture: 2023 Control system: Siemens Technical data: - Voltage: 400 V, 50 Hz - Current: 40 A - Power: 15 kW - Operating pressure: 4.5 bar - Weight: 1,600 kg In our assessment, the assembly system is in like-new condition. Technical features: - Assembly system for press-fitting individual components into a battery cooling plate - Pressing process via pneumatic cylinders and servo motors - Pneumatic suction system for the cooling plate Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: new, Year of construction: 2026, CORMAK TA30K Scissor Lift Table Trolley The CORMAK TA30K scissor lift table trolley is a mobile device designed for transporting, lifting, and positioning loads at the appropriate working height. The wide platform height adjustment range makes it easy to adapt the working level to assembly stations, workbenches, and material picking and handling areas. Key Benefits of the TA30K Scissor Lift Table Trolley - Load capacity of up to 300 kg – enables the transportation and lifting of components, containers, production materials, and other loads used in daily industrial operations. - Lifting height of up to 1000 mm – allows loads to be positioned at a convenient working height, reducing the need for manual lifting of heavy components. - Height adjustment range of 410–1000 mm – allows the platform to be adapted to different workstations, assembly tables, and material receiving areas. - Large 600 × 950 mm working platform – provides sufficient space for positioning larger containers, parts, and components. - Mobile design – allows loads to be transported between workstations without the need for a separate lifting table. - Combination of transport and work functions – one device can be used both for moving materials and positioning them at a height suitable for the operation being performed. Mobile Lift Table for Material Transport and Handling The TA30K scissor lift table trolley combines the functionality of a transport trolley with an adjustable worktable. This allows loads to be transported to a workstation and then raised to a suitable height for further processing, assembly, inspection, or order picking. This solution reduces the number of additional material handling operations and helps optimize material flow between individual stages of the production process. The trolley can also be used as a mobile support surface wherever components or containers need to be temporarily positioned at a specific height. Adjustable Height for Improved Working Ergonomics The lifting range of 410 to 1000 mm allows the platform height to be adjusted to the task being performed. Operators can position materials closer to the required working height instead of repeatedly lifting them from a low position or placing them directly on the floor. This is particularly important during repetitive tasks such as parts picking, packing, assembly, or preparing components for further processing. Proper adjustment of the working surface height can reduce frequent bending and improve the efficiency of picking up and placing materials. Large 600 × 950 mm Working Surface The 600 × 950 mm tabletop provides ample space for securely positioning various loads, containers, and production components. The larger working surface makes the trolley suitable for handling bulky components and for assembling or preparing multiple items at a single workstation. When selecting the equipment, it is important to consider not only the weight of the load but also its dimensions, support requirements, and center of gravity. Proper load distribution on the platform contributes to stability and safety during operation. TA30K Technical Specifications Load capacity 300 kg Minimum table height 410 mm Lrjdpfxe Aa Nguj Akmeu Maximum table height 1000 mm Tabletop dimensions 600 × 950 mm Wheel diameter 120 mm Weight 60 kg