Used Diffundit/ Dreherei Koch Vz 110 for sale (5,767)

Condition: refurbished (used), Year of construction: 2026, overall weight: 13,000 kg, Completely overhauled pre-shredder VZ 110. - Engine 110 kW - Screen D 40 mm - Fully refurbished with new rotor shaft, cutter bars, sprockets with triplex chain. - Gearbox inspected and newly fitted with bearings - Clutch inspected and newly fitted with bearings - Engine inspected and newly fitted with bearings - Machine repaint: old paint removed, primed, and new finish applied Repair of your defective machine or new fabrication possible Guodpjyk Ea Ajfx Albec

Year of construction: 2024, condition: new, +++++ We manufacture the original +++++ Machine parts for pre-shredders VZ 120 , VZ 110, VZ 90, VZ55 rotor shafts wear parts Copper cable recycling machines Gusdpfx Alsfgiuzobsc Made by Koch Dortmund - Dorstfeld Germany Our non-binding offer - labyrinth rings - Dirt deflector - spacer rings - rotor shafts AGB on our homepage Our effort -to help you

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Godpfx Aler Nfvmebeuc Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: new, Brinkmann Pumps SBG1102-V-Z+095 Pump No., unused, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Gjdpfx Alek Shwrjbjuc

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: Gjdpfxoy Tu Rwe Albsuc – pneumatic clutch and brake – control panel – two frames – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: used, Year of construction: 1984, CNC Milling Machine Heckler & Koch BA 20 CNC Manufacturer: Heckler & Koch (Germany) Type: Vertical CNC Machining Center (Milling Machine) Control system: Depending on the version – Siemens, Heidenhain, or proprietary HK system (the photos show a panel with a monitor and traditional keyboard, most likely Heidenhain or Siemens Sinumerik control). Worktable: typically 2000 × 500 mm (designation BA 20 = 2000 mm table length) Working travels (X/Y/Z axes): Guedpfx Aew Uac Holboc X: approx. 2000 mm Y: approx. 500 mm Z: approx. 500–600 mm Spindle power: usually 10–15 kW Spindle speed: up to approx. 6000 rpm (depending on the version) Tool holder: SK40 or SK50 (SK40 holders visible in the photos) Tool magazine: usually 16–20 tools Cooling: via external coolant nozzle (flexible blue pipe visible in the photos) Total weight: approx. 6–8 tons Power supply: 400 V, 50 Hz, connected load approx. 20–25 kVA Applications: - Production of medium-sized metal parts - Defense, machinery, and automotive industries - Suitable for batch and single-piece production Equipment: control panel, keyboard, mouse, vices, guards 📌 Applications: - Metalworking - Batch and single-piece production - Metalworking shops, manufacturing plants

Condition: excellent (used), Catalogue number: 7549 TECHNICAL DATA Max width of workpiece: 1100mm Max height of workpiece: 170mm 2 units: 1) Grooved rubber roller for calibration 2) Rubber roller + pad + metal roller – from above: Metal roller, sliding Working unit Metal roller, sliding Unit with pad Output metal roller, sliding – from below: Feed belt Pneumatic belt oscillation Electric table lifting 2 feed speeds Motor: 11kW With pneumatic brake Working pressure: 6-8 bar Extractor outlet diameter: 2x150mm Overall dimensions (L/W/H): 1960x1700x2000mm Weight approx.: 2000kg – German manufacture – 2 units – not repainted – Used sander, very good condition Net price: 34,900 PLN Net price: 8,300 EUR at 4.2 EUR rate Gsdoy T Irhopfx Albsuc (Prices may change with significant fluctuations)

Condition: good (used), Technical Data for Pallet Rack Beam: Racking System: Dexion Type: Speedlock Super 4 Scope of delivery includes: 01x pallet rack beam, used Material color: Sendzimir galvanized Beam type: SLB 110 Box profile: 110 x 50 mm Bracket: 4 HK (hook) Clear span: 2,995 mm Gujdpfx Ajxzqfkslbjc 02x safety pins, used Design: fully galvanized To secure the cross beams against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the article: This item is offered for self-collection only. Transport or shipping beyond this can be arranged at additional costs, which can be requested from us individually depending on the place of delivery and scope of delivery.

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Dexion Type: P90 The scope of delivery includes: 01x pallet racking beam, used Material color: sendzimir galvanized Box profile: 110 x 50 mm Beam type: SLB 110|15 Bracket: 5 HK Clear width: 2,900 mm Max. load per pair of beams 2,700 kg, with evenly distributed load 02x locking pin, used Material color: sendzimir galvanized For securing the longitudinal beams against unintentional lifting out Currently available from stock: 1560 pcs. Your contact at our company: Gujdpfx Aotpf Igjlbjc Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: SSI Schäfer Type: PR600 Scope of delivery includes: 01x pallet rack beam, used Material color: RAL 5010 gentian blue Gedexby Hdopfx Albouc Box profile: 110 x 50 mm Beam type: TRV1-118-115-30 CE Connector: 5 HK (hooks) Clear width: approx. 1,800 mm 02x safety pins, used Version: fully galvanized For securing the cross beams Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping of this item is desired, this will incur additional costs, which can be inquired separately depending on delivery location or scope of delivery.

Condition: good (used), Technical data for pallet rack beam: Racking system: Bito Type: PL 38 Included in delivery: 01x Pallet rack beam, used Material colour: blue Box profile: 110 x 50 mm Beam type: PT36.112LN Connector: 3 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 1,900 kg, with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing longitudinal beams against unintentional lifting Gsdew Dd Srepfx Albsuc Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. Transport or shipping beyond this is subject to additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Jung Heinrich Type: Esmena Gjdetp Tb Tepfx Albjuc The scope of delivery includes: 01x pallet racking beam, used Material color: yellow Box profile: 115 x 40 mm Agraffe: 4 hooks Clear width: 1,100 mm 02x locking pins, used Version: completely galvanized For securing the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, For sale: KOCH net saw—optimized for fast and precise trimming of furniture components, especially drawer sides. The machine ensures a clean, net cut (with no tears or edge defects)—a solution significantly faster than cutting on panel saws. Key features and specifications: - PLC control—automatic operation (separately retrofitted) - Buffer magazine for workpieces - Pusher beam on hydraulic system—feeds part to next operation - Maximum machine span: 2 m - Maximum feed speed: 12 m/min - Drive can be activated from both sides of the machine - Top scoring saw blades for cutting components from above - Spindle speed approx. 4,500–5,000 rpm (motors: 2,100 rpm) - Complete safety covers and safety sensors - Ready production of 'drawer ribbon' (final-sized drawer banding) The top saws are used for producing complete drawer bands (ready-to-install components). Example: a 640 mm long piece is surfaced/truncated from above and divided into 3 parts, so by adding the drawer front and bottom, you have a finished drawer without any additional side processing. Performance: For a sample drawer side (350 x 100 mm): approx. 25,000–30,000 pieces per shift (highly efficient production). Gusdpfxeyyyfye Albsc Location: Elbląg Loading is the responsibility of the buyer/assistance available on site. Please feel free to get in touch—I’ll be happy to answer any questions.

Condition: excellent (used), REMS Cut 110-75-50 Guodpfoy Rt Icox Albsc

Condition: good (used), Approx. 111 Corlettes, Cordes und Koch, width 1.30 / 2m / 2.40m – used – : Guedpfx Aleyhxlqeboc Prices per unit ex location (net): Type 1 + 2 (2m wide): only €99 each Type 3 (1.30m wide): only €69 each Type 4 (2.40m wide): only €99 each For complete purchase (preferred): €8,950 (net) Manufacturer: Cordes und Koch Type: Corlette / Multi-Box Year of manufacture: unknown Collapsible Not stackable Depth: 1.15m Type 1 – approx. 70 units Width: approx. 2m Height: approx. 1.80m Type 2 – approx. 32 units Width: approx. 2m Height: approx. 1.92m Type 3 – approx. 6 units Width: approx. 1.30m Height: approx. 1.80m Type 4 – approx. 3 units Width: approx. 2.40m Height: approx. 1.80m Condition: good, see photos Available: immediately Location: Nuremberg

Condition: good (used), Koch drying container 1500 liters with additional heating 18 KWr Gusdswmbncopfx Albjc year price: 7.900€ Contact: Mr. Rainer Eckerle

Condition: good (used), Approx. 221 Corlettes / Multi-Boxes, width 2m / 2.50m / 2.70m, partly stackable - used - : Prices (net) per unit ex location: €149 Price (net) Type 3 – stackable: €169 per unit, ex location! Manufacturer: Cordes und Koch Type: Corlette / Multi Box Dimensions (L × W × H in cm) Type 1 = 13 units (only sold as a complete lot) 250 x 115 x 180 Colour: blue Type 2 = 2 units 270 x 115 x 240 Colour: green Guedpfoxc E Hlsx Albsc Type 3 = 192 units, approx. 62 stackable Minimum purchase: 10 units 200 x 115 x 180 Colour: blue Type 4 = 14 units (only sold as a complete lot) 270 x 115 x 188 Colour: green Condition: good Available: immediately Location: 63128 Dietzenbach

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: three-phase, year of last overhaul: 2012, Basic information: Control system: Siemens S7-400 Technical details: Material processed to date: Steel wire Number of drawing steps: 12 Technical condition: New electrical system in 2012 Maximum inlet wire diameter: 4 mm Minimum inlet wire diameter: 3 mm Maximum finished wire diameter: 1.3 mm Minimum finished wire diameter: 0.78 mm Maximum inlet wire tensile strength: 1225 N/mm² Number of blocks: 12 Block axis: vertical Drawing die diameter: 450 mm Drawing die thickness: 43 mm Drawing die diameter: 27 mm Water pressure: min. 2 bar Control method between drawing dies: Guide rollers Air pressure: 6 bar Gujdpfx Alozb N Rajbec Drawing die cooling: Water Drawing die cooling: Water Drive type: Three-phase motor Motor manufacturer: SIEMENS Drive power: 22 kW Motor controller: Siemens Sinamics Operating voltage: 400 V Frequency: 50 Hz Electrical cabinet: present Guide rail: present Production direction: from left to right Consisting of: KOCH unwinder KOCH dancer KOCH KHS 800 S single spooler

Condition: excellent (used), Year of construction: 2009, power oil transformer 12,5MVA 110 / 23kV, manufacturer ETD Plzeň Czech, on load tap changer, conservator, functional, in operation since 2009, very good off-load and on load losses, price negotiable. Gsdpfx Aehufn Nslbsuc

Condition: used, Year of construction: 2006, drilling depth: 28 mm, Used Koch Drilling and Dowel Insertion Machine, Sprint-PTP-3 Technical data of the machine: Workpiece dimensions: Length Y: 110-800mm Width X: 20-1200mm Thickness Z: 14-60mm Material: Chipboard/MDF/Softwood Machine with 2 working areas. 2 workpieces with a maximum width of 600mm each can be loaded independently of each other. Working height 900mm - with horizontal drilling station - with glue application and dowel insertion station - with 1 oscillating conveyor - Drilling distance vertically Z above the support table: 35 mm - 1 stop rail on the left and right - Mechanical digital displays for height adjustment - Work cycle triggered by a manual button Koch Numeric with 1 NC axis (X) Positioning control with PC (Windows XP Professional PC) Including widened machine frame for a maximum workpiece width of 1200mm 2 additional workpiece clamping cylinders Center stop for 4 working areas (removable for wide workpieces) Horizontal drilling station with 1 drilling spindle: Max. drilling depth 28mm Drill chuck Ø10mm Total drill length 70mm Drill speed 7200 rpm With dowel hole blow-out Glue application and dowel insertion station Dowel diameter: 8mm Dowel length 30mm Godjzbunkepfx Albjuc Dowel projection 7-14 mm Set to 11mm Tolerance for wood dowels: --- Dowel length +/- 1 mm --- Dowel diameter +0.1/-0.2 mm With electronic glue monitoring (ELC) A monitoring device is installed before the glue valve, which measures the glue flow during each work cycle. If no glue is injected at a valve, the machine interrupts its work cycle and displays the corresponding glue valve in the control cabinet. Electrical values: Connection value: 400V, 50 Hz, 3 phases Voltage fluctuations max +6% to 10% Air connection 1 x R 1/2" internal thread 7 bar Extraction air velocity: approx. 30m/sec

Condition: new, GRATINGS FOR PALLET RACKING 270CM/110CM SHELVING BAYS Gratings for pallet racking 270 cm x 110 cm bays Data : Godezbqi Dopfx Albouc - Length per module : approx. 890 mm - Width per module : approx. 989 mm - total width : approx. 2670 mm - total depth : approx. 1095 mm - suitable for 2700 x 1100 mm shelf bays - 1 level consists of 3 pcs. Gratings - Edging : T-profile 42 mm - Mesh size : 80 x 40 mm - Load capacity: 1000 kg per grating, with evenly distributed load - Surface : hot-dip galvanized - New from stock -AVAILABLE SEVERAL TIMES! Price: 189,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, machine/vehicle number: 006106, Max. panel width: 700 mm Max. panel length: 2500 mm No of Top Units: 1 Positioning of Units by NC: yes Lateral horizontal groups: yes Gujdey Nkmmjpfx Albsc

Condition: good (used), Year of construction: 2002, machine/vehicle number: 2344, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, total length: 800 mm, total width: 600 mm, total height: 1,400 mm, overall weight: 100 kg, For sale is a hot air container dryer, model CKT 70, from the renowned manufacturer Werner Koch Maschinentechnik. This unit is specifically designed for the efficient drying of plastic granulates, and with a heating capacity of 6 kW, it delivers consistent performance to meet industrial requirements. Transport and loading can be arranged across Europe upon request and at an additional cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-ins or exchanges are welcome! Machinery Trade PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Godpfx Aey I Rpfolbeuc Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For more information or to get in touch, please visit our website.

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 8109/30, Drilling and Dowel Inserting Machine with PLC + Part Return | 8 heads For sale: a professional through-feed drilling and dowel inserting machine for the production of furniture components, particularly drawer sides. The machine is equipped with PLC control, automatic part return, and an expanded head arrangement (including rear heads), enabling the complete operation to be performed in a single pass—without re-feeding the workpiece. Technical Specifications: - Number of heads/motors: 8 - Head configuration: front/side/rear (double-sided machining in a single cycle) - Control: PLC - Part return: yes (closed production loop) - Maximum working width: 2000 mm - Power supply: 400 V - Pneumatics: yes Gujdpfx Aeyzg Udolbjc - Year of manufacture: 1981 - Manufacturer: Gerhard Koch (Germany) - Condition: operational, in ongoing serial production Performance: Approx. 6,000 drawer sides per 8-hour shift Thanks to the rear heads, components that typically require two passes are processed in one, significantly reducing cycle times and increasing productivity. Applications: - Drawer sides - Cabinet components - Batch and repeat production - Automated production lines Key advantages: - Single pass processing instead of two - High repeatability - Stable, heavy-duty construction - Perfect for mass production - Proven German technology Location: Elbląg Please contact me for further information.

Condition: good (used), Year of construction: 1997, functionality: fully functional, input voltage: 24 V, control type: PLC-controlled, actuation type: pneumatic, Offered here is a proven industrial unit from KOCH Technik, consisting of the TMA8 control/conveying housing and a mounted dual mixing diverter. This system is ideal for automated feeding and proportional mixing of two plastic components. Manufacturer: Werner Koch Maschinentechnik GmbH Type: TMA8 No.: 8515 Voltage: 24 V Year of manufacture: 10-97 (October 1997) Transport and loading can be organized Europe-wide upon request and at an additional charge. Prices plus VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible. Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Guodpoy Iwqijfx Albjc Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.