Used Drawer Runner for sale (1,161)

Condition: used, drawer runner, telescopic runner, drawer pull-out, drawer runners, drawer pull-out, Telescopic rails, pull-out rails, heavy-duty pull-out, full-extension ball guide, roller slide guide Podpfeq U Tz Hox Airsgu -Drawer rail: roller slide guide length 700 mm -Load capacity: kg -Quantity: 3x set available -Price: per set -Transport dimensions: 700/70/H45 mm -Weight: 6,3 kg/set

Condition: like new (used), Year of construction: 2012, Apfel – Tool cabinet with four drawers suitable for long tools / reamers & deep-hole drills, etc. Podpe Afdgtjfx Airsgu - Year of manufacture: 2012 - 3 x drawers, each 180 mm wide / load capacity 900 kg each - 1 x drawer, 300 mm wide / load capacity 1800 kg - Overall height: 2140 mm - Cabinet dimensions (W x H x D): 1040 x 2140 x 1300 mm - Empty weight: approx. 450 kg Errors and omissions excepted.

Condition: used, 12 St. ca. 90 kg ca. 710x720x1000 mm drawer measurements 600 x 600 mm Colour 7035/5012 RAL Cabinet including assortment of dividers Large drawer usable space Full extension drawers (VA) 100% 8 drawers with internal height 40 mm 2 drawers with internal height 70 mm, 2 drawers with internal height 95 mm, 7 drawers with tray dividers and boxes 3 drawers with rail dividers 2 drawers with foam inserts Podpfx Ajylcp Rsirogu Ball bearing drawer runners Individual pull-out stop Individual locking possible for each drawer Cabinet without key! Translated with (free version)

Condition: used, 9 St. ca. 750 x710x1020 mm weight 180 kg Colour 6011 RAL Large drawer usable space ...x... mm Full extension drawer runners (VA) 100% 2 drawers with internal height 30 mm 2 drawers with internal height 55 mm, 2 drawers with internal height 80 mm, 2 drawers with internal height 130 mm Ball bearing drawer runners Pgodpfx Aijy A Tb Torsu Individual pull-out stop Individual locking possible for each drawer TÜV GS tested Drawers flush with cabinet, recessed handles

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, lifting height: 7,300 mm, Year of construction: 2005, operating hours: 4,655 h, Equipment: cabin, DIECI 30.7 Runner telescopic loader Year of manufacture: 2005 According to the hour meter: 4,655 hours 3-ton lifting capacity 7.3-meter lifting height Iveco engine - Includes bucket - Integrated hydraulic side shift - Joystick control Pgodpfx Aioz Ixvbsrsu - All-wheel drive - 3 steering modes - Cab with heating - Lighting system with turn signals - Additional circuits at the rear - Ready for immediate use! Selling price: €21,500 (net) Affordable delivery also possible!

Condition: good (used), Year of construction: 1998, operating hours: 95,843 h, functionality: fully functional, machine/vehicle number: 313369, For sale is an extremely robust and precise Gildemeister CTX 400E universal lathe, manufactured in 1998. This machine comes from a factory liquidation and is characterized by its high durability and solid construction. It is ideally suited for precise single-piece and series production. The machine is fully functional and can be inspected while powered on. Equipment: Pgode Afpmxopfx Aireu - 3-jaw chuck - 11-position tool turret (some powered tools) - Automatic tailstock - Control panel, Heidenhain CNC Pilot control system - Chip conveyor Accessories: - Workbench (5 drawers, 1 door) with partition Contents: Hand tools Attractive offer – flexible & worry-free We offer you not only a high-quality product but also tailored financing options that adapt to your needs. Whether it’s a down payment, installment payments, or individual financing models – together we will find the right solution. Upon request, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors!

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16th to November 26th. TECHNICAL DETAILS General Information Machine Number: 00071830 Hours Read: 3,143 h Control System: Siemens Sinumerik Electrical Data Operating Voltage: 400 V Frequency: 50 Hz Control Voltage: 24 V Rated Power: 150 kW Working Area Maximum Height: 1,270 mm Number of Turrets: 2 Workpiece Length: min. 700 mm Workpiece Length: max. 2,400 mm Workpiece Diameter: min. 50 mm Workpiece Diameter: max. 200 mm Podpfe Aaqz Tox Airsgu Main Spindle Main Spindle Drive Power: 2 × 37 kW Chuck Bore: max. 210 mm Chuck Data Piston Stroke: 25 mm Stroke per Jaw: 11.1 mm Actuation Force: max. 52.5 kN Actuation Pressure: max. 30 bar Speed: max. 2,000 rpm Transport Transport: possible on a standard truck EQUIPMENT Loading System Large quantity of VDI 50 tool holders Partially powered VDI 50 tool holders Partially standard VDI 50 tool holders Workbench Workshop drawer cabinet Extensive documentation

Condition: good (used), functionality: fully functional, 6 PSG hot runner controllers for sale 3 individual units: €880 each Pgedpfxoz Ndhlo Airju 1 station with 3 units on a mobile frame: €2,400 for the complete station The three units of the station can be used together as a 24-channel control system or individually.

Condition: new, functionality: fully functional, machine/vehicle number: S.-Nr,: 20135, Brand new 24-zone hot runner controller, complete with all accessories as shown in the pictures. Pgedpfxsw N Rd Dj Airou

Condition: new, range L-W-H 1980x510x1860 mm weight 195 kg 15 St. weight max. in kg 700 kg Professional workbench / tool trolley Internal dimensions of the top left 3 drawers 395 x 395 x 65 mm. Internal dimensions of the middle 3 drawers 815 x 395 x 65 mm. Pgodpfju Imh Asx Airou Internal dimensions of the top right 3 drawers 395 x 395 x 65 mm. Internal dimensions of the left 4th drawer 395 x 395 x 140 mm. Inner dimensions of the middle 4th drawer 815 x 395 x 140 mm. Internal dimensions of the right 4th drawer 395 x 395 x 140 mm. Internal dimensions of the left 5th drawer 395 x 395 x 220 mm. Inner dimensions of the middle 5th drawer 815 x 395 x 220 mm. Internal dimensions of the right 5th drawer 395 x 395 x 220 mm. Dimensions of the wheels 150 x 40 mm. Solid wood panel thickness 40 mm. Packaging dimensions 189 x 55 x 80 cm. 4 x 150 mm swivel castor 2x with brake. 2 x robust solid stainless steel handle. 1 x central locking for all drawers. 4 x storage compartment blue. 2 x keys. Non-slip mat in every drawer. Very nice solid wood panel. Massive ball bearing slide. (Double bearing) All lower drawers are equipped with 2 runners. All drawers can be opened 100%.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 89,307 h, functionality: fully functional, machine/vehicle number: 01180001051, For sale is a powerful and reliable Gildemeister CTX 500E CNC universal lathe in good condition. Thanks to its stable inclined bed design, the machine offers maximum rigidity and excellent precision when machining medium to large workpieces. The machine can be inspected while powered on, by arrangement. Equipment: - Heidenhain control - Single spindle - Three-jaw chuck - 11-position tool turret (partially with driven tools) - Automatic tailstock - Chip conveyor Accessories: - Workbench (4 drawers, 1 door) - Telescopic drawer cabinet Contents: Pedpfxe Afph Nj Airogu Hand tools, analog/digital measuring instruments Attractive offer – flexible & hassle-free We offer you not only a high-quality product, but also tailored financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process, so you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes and errors!

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 12 kg, arm reach: 1,441 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.02 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-12D is based on Fanuc M-10iD/12 robot arm suitable for middle size machines and specifically adapted for handling vices. It consists of: 1) Robot: - Fanuc robot M-10iD/12 6-axis vertical robot Load capacity 12 kg / reach 1441mm R-30iB Plus controller A-cabinet I/O modules; DI16 / DO16 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Drawer palletizing system: Usable space per one drawer: 1000 x 480mm Max 5 drawers (depends on the height of the pieces) Load capacity of one drawer: 250 kg Reer safety light curtain, cat.4 Drawer opening possible from both sides Pgsdpfo Af Iiwsx Aireu LED status beacon Electrical cabinet and cables 3) Safety Options The Cage is our standard solution. All URC cells can also be delivered in the "Laser" version, which is designed for optimal accessibility. The price of the cells remains the same regardless of the chosen version. - Cage (Standard) - Omron Laser (Alternative) - Reer Light Curtain (Standard) 4) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC, I/O, M-fin, safety Preparing for a Clamping device (2nd clamping device available) Preparing for a PAD Preparing for an external Air Blow 5) Gripper Configuration The Teximp Gripper Interface includes everything needed for clamping parts on the robot side. - Gripper carrier 90° Schunk Gripper JGP-P 100-2 (2 pcs) Stroke per jaw [mm] = 5 Recommended workpiece weight [kg] = 8.75 ABR-PGZN-plus 100 blanks made of aluminum for rework by the customer Sensors G1/G2 - clamped/unclamped Blower nozzle Other possibility: - Gripper carrier 180° Schunk Gripper JGZ 100-1 (2 pcs) Stroke per jaw [mm] = 10 Recommended workpiece weight [kg] = 9 Sensors G1/G2 - clamped/unclamped (4 pcs) Blower nozzle 6) Automatic Door system Our robot cell includes an Auto Door for any Haas machine, with two available solutions: the original Haas Smart CAN DC Auto Door for machines built in 2020 and later, or Teximp’s Pneumatic Auto Door for older machines. PAD-HaasVF-side PAD-HaasVF-front PAD-HaasMM-front PAD-HaasST PAD-HaasUMC - PADs for machines without the original side door/window are also available. 7) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Operators can easily adjust jobs for different products/parts and then save them as "Recipes", enabling a complete robot setup change with just one click on the screen. This simplifies the programming process and minimizes downtime. - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23202019236, empty load weight: 5,675 kg, maximum load weight: 26,325 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 10/2026, next inspection (TÜV): 10/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,030 mm, suspension: air, tire size: 435/50 R19,5", color: yellow, Fine-grain steel welded construction, fifth-wheel coupling plate with replaceable 2" kingpin - Slightly inclined outer frame with "Load-Lock-Profil" for securing straps - Note: When securing straps in conjunction with side boards, the side boards must be opened! - Single-side operation of landing legs, straight lower section, without thrust compensation - Side-mounted door retainers, aluminium side underrun protection, galvanised steel rear underrun protection - Heavy-duty pallet stop on both sides, approx. 20–25 mm high, lashing points every 200 mm; loading height reduced by approx. 20–25 mm - Spare wheel, same make as standard tyres - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (padlock not included) # Axles and suspension - BPW disc-brake axles - Air suspension # Braking system - Dual-line compressed-air braking system - Spring-loaded parking brake - 2 misconnection-proof coupling heads at the front, without connecting lines - EBS electronic braking system with front EBS socket, without connecting cable - Warning: This trailer may only be towed by tractor units that ensure the effective operation of the ABS! - With raise/lower valve - Vehicle driving stability system # Wheels and tyres - 435/50 R19.5", make at manufacturer's discretion # Electrical system - 24 V, multi-chamber lights, yellow LED side lighting - Yellow LED side lighting with 20 LEDs per lamp - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin and 1 x 15-pin misconnection-proof sockets at the front, without connecting cable - LED safety light, mounted at the top of the rear corner posts - Approx. 30 mm thick screen-printed floor panels, cross joints with Omega inserts, on longitudinal bearers for high point loads; maximum forklift axle load 7,100 kg # Front bulkhead / corner posts - 2,580 mm high, steel corner posts in high-volume design # Centre posts - Pair of sliding posts, movable along the full length, with four-way sockets and a long lower socket - Pair of post positions # Insert boards - 4 rows of aluminium V-shaped insert boards # Rear wall / corner posts # Curtain - Curtain with welded-in horizontal and vertical tensioning straps # Roof - Sliding roof, rear end lift-up section; roof can be slid from rear to front; L-shaped roof rail for the automotive industry; internal width between roof rails approx. 2,490 mm; curtain colour: white - EcoLift lifting roof, raises by approx. 380 mm, assisted by gas struts - Front with 2 driving positions: - Front internal height approx. 2,900 mm / 3,000 mm # Operating instructions - If the overall height exceeds 4,000 mm, please note the following: - The transport operator is solely liable for any resulting damage. - The driver transporting the vehicle must obtain a permit under Section 29 of the German Road Traffic Regulations (StVO). - We accept no liability for transporting the vehicles. - Note: The specified gross weight is technically possible; depending on the load, it may not be achievable while complying with the permitted axle and fifth-wheel loads. # Registration / plates Pgedpfe Aay Sbsx Airsu - Germany - With DEKRA inspection and report - Load securing certificate to EN 12642 XL (valid only in conjunction with 4 rows of aluminium boards) - Additional DC 9.5 certificate, pallet stops on both sides, approx. 25 mm high; loading height reduced by approx. 25 mm; warning panel to ECE Regulation 70

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23202020752, empty load weight: 5,545 kg, maximum load weight: 26,455 kg, overall weight: 32,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 03/2017, next inspection (TÜV): 02/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 435/50R19,5", tire condition: 56 %, color: yellow, Equipment: VDI 2700 certified, Fine-grain steel welded frame; fifth-wheel plate with replaceable 2" kingpin Slightly angled outer frame with "Load-Lock-Profil" for lashing straps. Note: open sideboards to attach straps. 24 t two-speed landing gear, single-side operation, semicircular base, straight mounting plate, push compensation Without support legs Rear ladder Side door retainer Galvanised steel rear underrun guard Quarter mudguards; separate rear corner impact guard Heavy-duty pallet stop both sides, approx. 20–25 mm high; lashing points every 200 mm; loading height reduced by approx. 20–25 mm Plastic toolbox with drawer and shelf, padlockable (padlock not supplied) # Axles and suspension BPW drum brakes Axle spacing 1810 mm; technical axle load 10 t Air suspension Without lift axle # Braking system Dual-line compressed-air brakes Spring-operated parking brake 2 non-interchangeable coupling heads at front EBS with front socket, without connecting cable Warning: tow only with tractor units ensuring ABS effectiveness! Raise/lower valve Trailer electronic stability system # Wheels and tyres Pjdpfs Aaznksx Airogu 435/50 R19.5" Steel rims # Electrical system 24 V, multi-chamber lights, yellow side LEDs Number plate lights both sides 2 white front position lights 2 white/red rear outline marker lights Front: 2 x 7-pin and 1 x 15-pin non-interchangeable sockets; no connecting cable # Floor Approx. 30 mm anti-slip panels, transverse joints with omega inserts, on longitudinal bearers; forklift axle load up to 7100 kg 2580 mm steel high-volume corner posts; side-curtain release on headboard Removable centre posts 3 pairs of sliding posts along full length, four-way sockets and long lower pocket 3 pairs of post positions # Insertion boards 4 rows of aluminium V-shaped boards # Rear wall / corner posts Steel rear corner posts to roof underside; two-leaf rear portal doors, each with 2 internal locking rods # Curtain Curtain with welded horizontal and vertical straps # Roof Sliding roof, rear end lifts; slides rear to front; L-shaped roof rail for car transport; internal width between rails approx. 2490 mm; white curtain EcoLift lifting roof, raises approx. 380 mm on both sides, gas-strut assisted; 3 front driving positions: internal height approx. 2900/2950/3000 mm; set to 2900 mm # Registration / signs Germany EN 12642 XL load-securing certificate (valid only with 4 rows of aluminium boards) Additional DC 9.5 certificate; pallet stop both sides, approx. 25 mm high; loading height reduced by approx. 25 mm Yellow reflective strips continuously along bottom of side curtains Red reflective strips around rear portal Archive images! Vehicle may still be in use!

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, _KRAUSSMAFFEI KM 1300 MX – SP 8100_ _Screw Ø105 mm_ _CLAMPING UNIT_ • Clamping force: 13,000 kN / 1,300 t • Mold opening force: 910 kN • Moving platen force (open/close): 159 / 153 kN • Platen dimensions: 2,150 × 1,910 mm • Tie bar distance (H × V): 1,550 × 1,250 mm • Opening stroke: 2,350 mm • Mold height (min./max.): 700 / 1,400 mm • Maximum daylight: 3,050 mm • Ejector stroke: 350 mm • Ejector force (forward/backward): 250 / 125 kN • Optional mold height (min./max.): 950 / 1,650 mm • Daylight with increased mold height: 3,300 mm _INJECTION UNIT – SP 8100_ • Screw diameter: 105 mm • L/D ratio: 23 • Max. injection pressure: 1,778 bar • Stroke volume: 4,546 cm³ • Shot weight (PS): 4,137 g • Injection flow rate: 805 cm³/s • Screw speed (nominal/max.): 126 / 159 rpm • Plasticizing rate PS (nominal/max.): 147 / 187 g/s • Plasticizing rate PE (nominal/max.): 116 / 147 g/s • Nozzle contact force: 166 kN _ELECTRO-HYDRAULIC EQUIPMENT_ • Pump motor power: 110 kW • Installed heating capacity: 59 kW • Barrel heating zones: 7 • Dry cycle rate (Euromap 6): 761 cycles/h • Dry cycle time (Euromap 6): 4.7 s • Oil tank capacity: 1,500 l _DIMENSIONS & WEIGHT_ • Net weight incl. cabinet: 77 t • Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m • Maximum mold weight: 29,000 kg _ELECTRIC SCREW DRIVE_ • Screw drive power: 117 kW • Screw speed (nominal/max.): 123 / 193 rpm • Plasticizing rate PS (nominal/max.): 144 / 226 g/s • Plasticizing rate PE (nominal/max.): 114 / 178 g/s _ACCUMULATOR (ZE)_ • Injection flow rate: 1,732 cm³/s _EQUIPMENT_ Pjdjztpkpspfx Airjgu • Removable tie bar (retractable tie bar) • Euromap 67 – robot interface • 48 hot runner controllers • 8 pneumatic cascades • 6 hydraulic cascades • 2+2 cores • MC6 control panel _PROCESSED MATERIALS_ • PP, PC

Condition: used, Year of construction: 2011, Various hot runner controllers, some with Harding connectors and cables. Pgsdpfjwqmqwsx Airou Some of the devices originate from a cleanroom environment in the medical technology sector.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, For sale: KOCH net saw—optimized for fast and precise trimming of furniture components, especially drawer sides. The machine ensures a clean, net cut (with no tears or edge defects)—a solution significantly faster than cutting on panel saws. Key features and specifications: - PLC control—automatic operation (separately retrofitted) - Buffer magazine for workpieces - Pusher beam on hydraulic system—feeds part to next operation - Maximum machine span: 2 m - Maximum feed speed: 12 m/min - Drive can be activated from both sides of the machine - Top scoring saw blades for cutting components from above - Spindle speed approx. 4,500–5,000 rpm (motors: 2,100 rpm) Pgodpfoyyyfysx Aireu - Complete safety covers and safety sensors - Ready production of 'drawer ribbon' (final-sized drawer banding) The top saws are used for producing complete drawer bands (ready-to-install components). Example: a 640 mm long piece is surfaced/truncated from above and divided into 3 parts, so by adding the drawer front and bottom, you have a finished drawer without any additional side processing. Performance: For a sample drawer side (350 x 100 mm): approx. 25,000–30,000 pieces per shift (highly efficient production). Location: Elbląg Loading is the responsibility of the buyer/assistance available on site. Please feel free to get in touch—I’ll be happy to answer any questions.

Condition: excellent (used), functionality: fully functional, Feller hot runner controller, 70-channel. Prepared for expansion to 80 channels! In excellent condition, sourced from a cleanroom injection molding facility in the medical technology sector. Pgjdszdu Hqepfx Airsu The original new price was over €20,000.

Condition: good (used), functionality: fully functional, The hot runner system DPK 15 from Günther is for sale. The system has been checked for functionality by the manufacturer. Psdpfszl R R Uex Airogu The following inspections were carried out: Visual inspection, inside and outside Update from V1.56 to V1.6.7 Temperature calibration Testing according to DIN VDE 0701 Both cables, STL/0/15 and TVK/3/15, are in good technical condition and correctly wired.

Condition: excellent (used), functionality: fully functional, Hot runner system for 20 channels With cable After a complete inspection, fully functional Psdpfox Hi R Ssx Airjgu PRICE REDUCED FROM 1550 TO 1000 EUR!!!

Condition: new, New 64-zone hot runner controller. Used for only 2 hours to sample a mold. From a cleanroom production line for pipette tips. Equipped with Harting connectors for sensors and temperature. Plug in and ready to run. Pgodpoxk Txfsfx Airsu

Condition: used, Workshop Drawer cabinet PAROLAI 11 drawers: Psdjz I Dfujpfx Airsgu 3 drawers height 40 mm 6 drawers height 60 mm 1 drawers height 150 mm 1 drawers height 90 mm Dimensions (L x W x H): 910 x 720 x 1110 mm Weight: approx 150 KG

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Vertical Machining Center Fehlmann Model Picomax 60-M HSC Heidenhain TNC 530, excellent condition, CE certified! Technical Data: >> Year of manufacture: 2008, Machine No.: 14508674 >> Travel distances X/Y/Z: 505/355/610 mm >> Table surface (L x W): 920 x 380 mm >> Number of T-slots: 7 >> T-slot width: 12H8 >> T-slot spacing: 50 mm >> Permissible table load: 250 kg >> Distance between coordinate table and spindle nose: 84 – 694 mm >> Feed rate X/Y/Z: 1 – 20000 mm/min >> Tool holder: SK 30 >> Tool changer: 24 tools >> Spindle speed range: 50-20000 rpm >> Weight: 3350 kg >> Dimensions: 3.0 m × 2.4 m × 3.0 m >> Meter reading: Operating hours: 12,826 >> Meter reading: Spindle hours: 5,303 Accessories included with the machine: - Renishaw probing system OMP 40-2 with spindle adapter - Cool air nozzle for M-function, switchable - Direct linear measuring system with compressed air supply - Thermal compensation - Compensation for spindle and thermal expansion - Ethernet interface - Laser system NT incl. blow-off nozzles for tool measurement and breakage detection - 4th/5th axis FEHLMANN ATS 160 CNC Automatic dividing table with double clamping in both axes and EROWA quick-change chuck ITS - Machine light - Spindle cooler - Handwheel - Coolant system with chip drawer and fine chip insert - Tools in the lower cabinet Pjdpo Agabtjfx Airsgu - Transport securing - Operating and programming manual (also for additional equipment) About the machine: Offered is a vertical machining center, Fehlmann model Picomax 60M HSC, in very good condition. The machine features a Heidenhain TNC 530 control system. Programming is particularly easy in the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-oriented control systems that allow you to program conventional milling and drilling operations directly on the machine in an easily understandable plain text dialog. The accessories include a dividing head ATS 160, the 4th and 5th machine axes, with various mounting plates, operating manuals, and much more (see pictures). Mechanically and electrically inspected. Take the opportunity to inspect and test this machine on site while it is powered up.

Condition: excellent (used), Fiege 8-channel hot runner controller, including connection cable and Harting connector. Psdpfx Aeyr Eiteirsgu This unit comes from a toolmaking facility and was used exclusively for sampling purposes. As a result, it has very few operating hours. The controller is supplied complete with cable. Before use, an electrician should adapt the connector configuration to your tooling.

Condition: used, Sat B2599A Drawer Oven 1000T 130 °C Industrial Oven, Drying Oven If very different products or product parts with equally different processing times are to be treated independently of each other in the smallest possible space, drawer ovens are the most sensible and ergonomic solution. Oven data Manufacturer: Sat Model: B 2599 A Type: 1000T Type: Drawer oven External dimensions of the oven Width with control cabinet: 2500 mm Depth: 1700 mm Height: 2250 mm Usable volume in each drawer Width: 1200 mm Depth: 850 mm Height: 170 mm (measured 178 mm) Maximum working temperature: 130 °C Temperature homogeneity in the usable volume, in a stabilized state: +/- 3 °C at 80 °C Frame: The basic structure consists of an unalloyed steel frame, on which the outer cladding made of unalloyed steel is mounted, painted in RAL 1013 (pearl white). The oven inner casing is made of aluminized sheet steel. The insulation between the two oven casings (inner/outer casing) is ensured by 120 mm of mineral wool. Floor: As with the oven walls, with 120 mm thick thermal insulation. Height (from factory floor to the first drawer): 800 mm +/- 100 mm, adjustable via the oven feet. Openings: 3 drawers, height 250 mm, for a usable loading height of 120 mm. Maintenance doors: 2-wing maintenance door on the rear of the oven. Secured with screws. This door enables complete access to the inside of the oven. Handling of the parts: The handling of the parts is ensured via 3 drawers (stacked on top of each other). Height between each drawer: 250 mm Usable height per drawer: 170 mm, with almost 10 mm of clearance. The drawers are smooth and equipped with a closing piece on the drawer bottom to reduce heat loss when opening. Each drawer has a usable load capacity of 120 kg with load distribution over the entire area. Load peaks of up to 240 kg can be supported. The drawer seals are made of silicone. The locking mechanisms for each drawer are secured via electromagnets and controlled by the Siemens system. Time control of the minimum preheating time with a timer per drawer (located in the control cabinet). Time control of the maximum preheating time with a timer per drawer (located in the control cabinet). A temperature display is provided for each drawer. These displays will be arranged on the front of the oven, to the left of the drawers. Ventilation: Number of circulation fans: 1 Psdpfoim Ik Sox Airjgu Circulation rate: 4,400 m³/h at 1450 rpm Motor power: 1.5 kW Rated voltage: 400 V Rated current: 42 A Power: 24 kW You can find more industrial ovens in other sizes - new and used - in our shop! International shipping costs on request!