Used Edgeracer Er 1500 D for sale (63,986)

Condition: new, functionality: fully functional, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 102 mm, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, working height: 950 mm, workpiece length (max.): 102 mm, Deburring on both sides in just one pass - of course with 100% reproducible results and precise processing of the inside and outside edges - only the EdgeRacer 1500 D offers you this. Nwedpjucw Rbefx Aiqoi The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, thread pull-throughs and the like. The maximum component height is 102 mm. The infeed of the brushes working from above and below can be set independently of each other. Thanks to the roller conveyor, the infeed can also be below or above roller table level.

Condition: new, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 102 mm, total length: 1,300 mm, total width: 3,100 mm, total height: 2,600 mm, overall weight: 2,600 kg, workpiece height (max.): 102 mm, pass-through width: 1,500 mm, An all-in-one machine: removing slag, burrs, and oxides Nwsdswzybkspfx Aiqsi Reliable and clean removal of slag using slag hammer brushes EdgeRacer the Grinder effortlessly removes the slag that forms on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted so that they almost touch the underside. The steel bristles then knock off the slag. Powerful deburring and defined edge rounding EdgeRacer® the Grinder effortlessly removes stubborn stamping burrs and laser beads/splatter. By adjusting the brush feed, you also determine the edge rounding performance. Deburring and edge rounding of thin sheet metal and 3D workpieces Deburr thin sheets or sheets with cut-outs. The grinding brushes can be extended beyond the transport level, so that the entire workpiece edge is processed. The oxide disc can be used to remove oxide layers on internal and external contours. Full working width or double performance – optimally adapted to your needs Depending on the width of the parts to be processed, you can choose between two processing modes. Select single-row processing to fully utilize the working width, whether for wide parts or for parallel feeding. To optimize tool wear, the brushes automatically change their position. For narrower workpieces, choose the double-row processing. This achieves double the processing in a single pass.

Condition: used, Year of construction: 2016, operating hours: 851 h, functionality: fully functional, machine/vehicle number: MN25724, working width: 1,500 mm, feed rate X-axis: 4 m/min, type of input current: three-phase, sheet thickness (max.): 50 mm, total length: 1,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 2,600 kg, working height: 950 mm, workpiece height (max.): 50 mm, workpiece width (max.): 1,500 mm, The ER 1500 E is a deburring machine working from above on one side with the EdgeRacer carousel for precise processing of inner and outer contours with user-defined edge rounding. The EdgeRacer ER 1500 E offers a high throughput rate of more than 300 m²/h, surface-friendly processing - even with polished, brushed and foil-coated sheets - and reproducible results. Thanks to the roller conveyor of the EdgeRacer ER 1500 E, the sanding heads can also be fed below roller table level. The roller transport also ensures maximum energy efficiency - the processing costs are usually less than €0.01 per square meter of processed sheet metal. Thanks to the reversing operation, the sheets to be processed can be inserted and removed on the infeed side. Purchase the EdgeRacer deburring machine ER 1500 E as a demonstration machine with only 851 operating hours directly from the manufacturer. Nwodpfx Ajucw Dzeiqsi

Condition: like new (used), 1500 m² Schäfer R3000 warehouse racking system, 3 stories Used, in top condition, like new, see pictures. Ground floor: steel construction warehouse racking system, above: 2 floors of Schäfer shelving system Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 stories Partial sale possible Negotiable price: upon request! Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse). Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse racking & steel construction racking immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racks for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) Nwjdpehzw Hisfx Aiqji • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance projects, we offer a complete, all-round carefree package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including a thorough cleanup. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h Nsdpfx Aioyga Uteqewi • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2450x820x1380 mm Weight 1500 kg Nwjdpfx Aijvz Hbfjqoi Total power requirement 2,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2450x820x1380 mm Nwedpfx Aovz E Eieiqoi Weight 1500 kg Total power requirement 2,5 kw

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine - Clamping force: max. 85 kN - Opening force: max. 120 kN Nedpfx Aezlfmkoiqjwi - Opening stroke: max. 300 mm - Distance between mold plates: max. 650 mm - Screw travel: max. 145 mm Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: like new (used), The Karl Schnell Paddle Mixer with a capacity of 1500 liters is a high-performance industrial meat processing machine designed for large-scale production facilities. Built for efficiency, reliability, and consistent mixing results, this powerful unit ensures uniform blending of meat, spices, and other ingredients. With overall dimensions of 260 x 215 x 230 cm, it is engineered for heavy-duty industrial use while maintaining operational stability and safety. The machine is constructed entirely from stainless steel, guaranteeing maximum durability, corrosion resistance, and compliance with strict hygiene standards required in the food industry. Its robust paddle mixing system enables thorough and homogeneous mixing while preserving product texture and quality. The design allows easy cleaning and maintenance, making it suitable for continuous professional use in meat processing plants. Key Features: Brand: Karl Schnell Capacity: 1500 liters Heavy-duty industrial paddle mixing system Fully constructed from stainless steel Designed for large-scale meat processing Nsdpjx Ax A Hefx Aiqjwi Dimensions: 260 x 215 x 230 cm

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Nsdpfx Aieym Ih Uoqewi

Condition: used, Milling holder, boring head, spindle head, drilling head, grooving drilling head, grooving head, spindle drilling head, boring head, universal drilling head, boring tool, facing head, facing and boring heads -Manufacturer: ER MEX CH, milling holders face and boring head MK4 -Type: D-210 -Dimensions: Ø 96 x 385 mm Nodpfxeu S Tc Eo Aiqowi -Weight: 8.3 kg

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Caterpillar C32, General information Field of application: Construction Weights Empty weight: 11.481 kg Functional Generator capacity: 1.500 kVA Dimensions of cargo space: 667 x 245 x 279 cm CE mark: yes Other information Fuel consumption: 232.8 Liter / Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = RATING TYPE STANDBY: Nwodpfx Aiex Dqnksqoi Output available with varying load for the duration of the interruption of the normal source power. Average power output is 70% of the standby power rating. Typical operation is 200 hours per year, with maximum expected usage of 500 hours per year.

Condition: like new (used), functionality: fully functional, * Mori Seiki ZT 1500 YB. * Opposed-spindle machine. * Spindle size A2-6, twin spindles. * 2 stacked turrets. * 9-axis controlled turning and milling center. * 2 turrets. * Y-axis upper turret. * 2 C-axes. * Bar capacity: 65 mm. * Two integrated 15 kW motors. * Tool life management and tool wear monitoring. * Two Renishaw automatic tool measurement arms. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Oil cooler for both spindles. * 340 Nm cutting torque. * 15-position turret, all positions motorized. * Automatic workpiece collector. * 1.5-meter bar feeder. * Interface for bar feeder installation. * Rear automatic part pick-up with special gripper for long parts. * Max. turning diameter: 320 mm. * Turning length: 810 mm. * Mori Seiki MSX-701 III control. * Max. distance between main spindle and counter spindle: 920 mm. * Main spindle speed: 5000 rpm. * Counter spindle speed: 5000 rpm. * X1 travel: 210 mm. * Y1 travel: +50 / -50 mm. * X2 travel: 210 mm. * Counter-spindle travel: 920 mm. * Number of powered tool stations: 2 x 15. * Capable of holding 30 tools per turret. Nwedpjzn H Tksfx Aiqji * Large selection of external and internal tool holders. * Large selection of axial and radial motorized blocks. * Approximate value of equipment: 18,000 euros. * Speed range of powered tools: 5,000 rpm. * Drive motor for powered tools: 5.5 kW. * Rapid traverse X1, X2: 25,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 30,000 mm/min. * C-axis resolution: 0.001°. * High-precision Hainbuch collet chucks on both spindles. * External and internal tool holders. * Motorized axial and radial blocks. * Communication ports via USB, PCMCIA card, and RS-232. * Rear chip conveyor. * Power transformer, documentation, parts list, electrical schematics, programming, and operating manual. * Machine in very good condition. * Machine weight 6.5 tons. * Machine available for inspection while in operation. * Immediate delivery, unless sold prior to listing.

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Nodpfoyab R Njx Aiqewi Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Robot WITTMANN W818-2558 (2013)

Condition: ready for operation (used), Unipo UCP 1500 operator terminal 2RIT0XFC9309, used, minor signs of wear, 100% functional Nedpfx Asxaidvjiqowi

Condition: new, Year of construction: 2026, Autonomous spreader of sand-salt mixture RPS-1500 from ТМ TlSAV - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. CHARACTERISTICS -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. Nwsdpfx Ajvpp S Njiqei If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Nwsdpfxeu Tp N De Aiqji Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 760 mm, total width: 330 mm, total length: 540 mm, overall weight: 55 kg, product height (max.): 4 mm, laser power: 1,500 W, Intelligent welding process support Give your welding process additional drive with intelligent functions. The Bodor Welding Process Database incorporates welding parameters for steel from 1 to 4 mm in terms of flat welds and fillet welds. Working as a beginner’s guide, it allows users with different levels of expertise to weld effortlessly. Smart control knob The control knob is easy to navigate. Users are able to manage their welding solutions in one setting. They can select welding process and adjust welding parameters (e.g. power, weld bead width, frequency, etc) , and the knob will automatically store customized parameters for their operations in the future. Portable design, integrated power structure Without built-in water tanks or cooling fans, BodorWelder 1500 takes up a covering area of 0.24㎡. This compact machine aims to help users with complex welding jobs in diverse working scenarios. It also comes with a set of Bodor welding nozzles, fulfilling all kinds of requirements. Nedpfx Aisqx Hnysqowi

Condition: new, Year of construction: 2026, ♻ P series pre-shredders with high quality cutters and low rotation speed for a lower energy consumption and maximum Nwedpfx Aieic U Dfsqsi productivity. Perfect shape and design for shredding wood pallets, plastics, styrofoam or similar materials. ✔ Power: 1 x 5,5kW + 1 x 9,2 kW ✔ Shaft length: 1580 mm ✔ Shaft diameter: 355 mm ✔ Shaft RPM: 5,3/10,3 rpm ✔ Number of cutting knives: 12/12 ✔ Granulation: - ✔ Capacity: up to 60 pcs./h ✔ Material discharge opening: - ✔ Material: Pallets, styrofoam, electronic waste, plastics, wood,... ✔ Filling opening: 1560 x 800 mm ✔ Dimensions L/W/H: 3,45/1,08/0,51 m ✔ Weight: 1400 kg Without mounting components and hopper 2 years warranty or 2000 working hours

Condition: used, maximum load weight: 1,540 kg, overall weight: 2,500 kg, axle configuration: 2 axles, first registration: 04/2021, Year of construction: 2021, Equipment: ABS, Manufacturer Tysse Model Nomek Minislamsuger / 1500 L Rustfri tank Trailer Year 2021 Condition Good Serial Number YYB6357D0M0303493 Ref. nr. 8062 Reg. date: 21-04-2021 Wheelbase: 2590 mm Total weight: 2500 Kg Net weight: 960 Kg Nwodpfxjx Nufae Aiqei Load capacity 1540 Kg Manufacturer: Nomek Tank capacity: 1500 L Pump motor: Honda GX390 Gasoline Vacuum pump: JUROP PN33 Vacuum capacity: 3.600 liters/min

Year of construction: 2008, condition: good (used), Centralized dust, fume, and solid pollutant extraction system for industrial facilities. The VAC unit is an ideal choice for a high vacuum system for welding fume extraction and dust removal from grinding and polishing processes. Capacity: 1,500 m³/h at 20,000 Pa vacuum Nwedpfspug Dpjx Aiqji Max vacuum: 22,000 Pa Inlet diameter: 135 mm Motor power: 22 kW Includes FlexFilter DX filtration unit with ATEX explosion relief panel (the panel discharges pressure in the event of an explosion). Separation efficiency: approx. 99.95% (fine dust) Additional cartridge filters on the clean air outlet. Noise silencer. The device is equipped with a new set of filter bags.

Year of construction: 2025, condition: new, functionality: fully functional, Stainless steel vibrating screen. Diameter 1500 mm. Mesh aperture 0.5 mm. Nwedpfxsx Tihks Aiqoi

Condition: used, • Manufacturer: MHG Strahlanlagen GmbH • Max. glass thickness: 70 mm • Max. glass size: height 1500 mm, length 3,000 mm • Open top • Dimensions: L 6200 x W 2500 x H 3000 mm • Total height: 2300 mm • Number of nozzles: 2 + 1 manual hand gun • Complete documentation available • Blasting speed steplessly adjustable: 100 – 500 mm/s • Blasting nozzle diameter: 6.5 mm • Air consumption at 6 bar (L/min): 1200 litres with 2 nozzles • Connection values: 230/400 V/50 Hz/3x16 A Nsdpfx Aijxu Au Doqowi

Year of construction: 2026, condition: new, functionality: fully functional, ECOSPIR EV These are very robust and largely maintenance-free machines that impress not only with their exterior design, but also with their sophisticated and well-engineered technology. Easy operation via touchscreen display. Minimal installation effort – Plug and Play. Technical Data: Operation via TOUCH SCREEN Storage of up to 8 wrapping programs Film tension control with mechanical brake Turntable diameter: 1500 mm Continuous turntable load capacity: 2000 kg Maximum pallet height: 2200 mm Power supply: 240 V, 50 Hz, 1 kW Machine with CE marking Warranty: 24 months Options: upon request Ramp 1500 mm Ramp for electric pallet truck (length 3000 mm) Tower extension for pallet heights up to max. 2700 mm Nwodpfxshfdc Ro Aiqsi POWER PRE-Stretch 200% POWER PRE-Stretch 250% POWER PRE-Stretch 0–400% (with frequency inverter) Black-light photocell – €490.00

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: LP20250813JWL-1, type of input current: AC, total height: 900 mm, total width: 730 mm, total length: 980 mm, input voltage: 220 V, overall weight: 190 kg, type of cooling: water, sheet thickness aluminum (max.): 3 mm, laser power: 1,500 W, input frequency: 50 Hz, laser wavelength: 1,070 nm, compressed air connection: 15 bar, Equipment: type plate available, This brand-new 2025 handheld fiber laser welding machine is offered in unused condition with 0 working hours and is ready for immediate operation. Designed for high-speed, high-precision welding, it delivers clean, strong welds with minimal heat distortion and excellent finishing quality. Compared to traditional MIG/TIG welding, this laser welding system offers significantly faster production speeds, reduced post-processing, lower consumable costs, and easier operation. The machine is compact, user-friendly, and suitable for both experienced operators and first-time users. Machine Condition: Year of manufacture: 2025 Condition: Brand new / unused Working hours: 0 hours Location: Portugal Availability: Immediate delivery Documentation included Technical Specifications: Laser power: 1500W Laser type: Fiber laser Welding mode: Handheld Cooling system: Industrial water cooling Power supply: 220V Wavelength: 1070 nm Welding thickness: up to 4 mm (depending on material) Operation mode: Continuous / Pulse (depending on configuration) Welding speed: up to 4x faster than conventional TIG welding Suitable Materials: Stainless steel Nwodpfxoyztpbj Aiqei Carbon steel Aluminum Galvanized steel Advantages: High welding precision Minimal thermal deformation Clean weld seams with little or no finishing required Low maintenance High production efficiency Ideal for industrial fabrication, metal furniture, automotive, and sheet metal applications Videos, additional photos, and live demonstration available upon request.