Used Electric Tugger Train With Trolley for sale (32,438)

Condition: used, Demag PK 10 N electric chain hoist with electric trolley complete Dedporvkansfx Af Ajci

Condition: used, Electric Tow Tractor, Tugger Train Tractor STILL E-Tugger STILL Type R06 3-wheel tow tractor, electric tow machine Serial no. W4X126A00120 Year of manufacture: 2010 Towing capacity: max. 6000 kg Payload: 150 kg Front axle load: 420 kg Rear axle load: 600 kg Drive power: 3.2 kW / 60 min Battery voltage: 24 volts - 3-wheel tow tractor - Without towing coupling, mounting plate with Ø 14 mm holes, hole spacing 65 / 75 x 120 mm - Lighting system - 24-volt socket at rear Djdpov Uramsfx Af Aoci - Equipped with 4 used traction batteries – functional – batteries, however, in poor condition - 3-wheel solid rubber tyres 4.00-8 / (3.00) Transport dimensions L x W x H: 1700 x 1000 x 1350 mm Unladen weight: 584 kg Battery weight: 467 kg (original battery defective) Four traction batteries provisionally installed – weight approx. 180 kg Total weight: approx. 770 kg In good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Heavy-duty transport trolley for weights up to 35 tons. The transporter is supported by four pivoting heavy-duty wheels and two omnidirectional drive wheels (--> in any desired direction). The drive wheels are pneumatically pressed onto the ground to achieve optimal traction. By rotating the two drive wheels, the various drive modes of the transporter are activated. This creates a very flexible transporter that can move longitudinally, laterally, and rotate on the spot. The transporter integrates a 35-ton lifting table, the contact surfaces of which are equipped with heat sinks to dissipate the heat emitted by the pallet (during the transport of warm/hot material). The lifting system is driven by a central motor, and the power transmission takes place via two gearboxes and axles that run through the frame. These axles drive 4 shafts at the corners of the transporter. Depending on the transport goods, a device can be constructed that is supported by the lifting system. The entire system is protected by aluminum covers, each of which is numbered so that it can be easily reattached in the correct position after maintenance. The transporters are designed to move a maximum load of 35 tons with a maximum speed of 1.5 km/h in manual mode and 1 km/h in semi-automatic mode. The speed can be adjusted continuously via the manual control with joysticks. Without a load and in manual mode, the transporter can reach 2.5 km/h; in semi-automatic mode, the speed is limited to 1.5 km/h. Control: SIEMENS SIMATIC Dcjdpfsxa Endsx Af Aei Operation: Radio remote control Drive: Battery-powered Dimensions approx. 3600 x 2500 x 800 mm

Condition: new, functionality: fully functional, Year of construction: 2026, The CITY BEETLE is a professional electric street cleaning trolley designed for the efficient and effortless collection and sorting of litter gathered from pedestrian streets, pavements, alleys, parks and the surrounding areas of various sites. It ensures many hours of uninterrupted work without physical strain, even during long shifts. Features • The trolley holds up to 20 litres of liquid and is equipped with special mounts for securing cleaning equipment. • It easily passes through turnstiles at bus and train stations. • The battery can be charged anywhere using a standard 230 V socket. • Special mounts allow tools to be easily attached to the trolley. Key benefits of the CITY BEETLE street cleaning trolley: Mobility: speed of up to 6 km/h for quick cleaning of large areas Environmental friendliness: safe for people and the environment Versatility: collects and sorts waste, washes away dirt with water Cost-effectiveness: low energy consumption and minimal maintenance Safe operation: electromagnetic brakes, optimal tyre pressure, IP54 protection Technical specifications: • Dimensions: 2300 × 1500 × 1200 mm • Weight: 410 kg (empty) • Main waste container: 1 × 240 l • Additional waste containers: 2 × 120 l • Water tanks: 2 × 10 l • Spray angle adjustment: Available • Motor power: 1.2 kW • Battery runtime: Up to 8 hours without recharging • Charging time: 10–12 hours • Wet cleaning function • Noise level: 65 dB • Wheel size: Ø320/Ø400 mm, with electromagnetic brakes for safe operation • Tilt angle: up to 10° • Protection class: IP54 (dust- and water-resistant) • Pump capacity: 3.6 l/min • Maximum pressure: 0.6 MPa ‘CITY ANT AQUA’ STREET VACUUM CLEANER Equipment for cleaning urban areas, streets, pavements, parks, stadiums, railway stations, airports, car parks and industrial zones of various types of waste. The City Ant street vacuum cleaner runs on rechargeable batteries, providing 9 hours of autonomous operation. It can be charged overnight from a 220 V mains supply. Easy to use, the vacuum cleaner can be operated with one hand and is quiet. Replacing the dust bag takes just 2–3 minutes. It does not pollute the air. It can collect all types of waste: wood, steel, plastic, paper, pieces of cardboard, textile waste, leaves, cigarette butts, cans and bottles (glass, plastic and metal), etc. The City Ant is suitable for various surfaces: concrete, asphalt, paving stones, grass, sand, etc. Technical specifications: - Electric motor - 48 V / 1200 W - 48 V / 1200 W electric drive - provides forward and reverse movement - Waste collection type - hopper; - Vacuum cleaner power 1.2 kW; - Maximum speed 6 km/h; - Hopper capacity 240 l; - Vacuum hose Ø 125 mm; - Vacuum hose length 2.5 m; Lrs Drt Hajvriluezoi - Operating time 8 hours; - Charging time 10–12 hours; - Wheels Ø 320 mm; - Dual spray nozzles; - Dust filter area 16 m²; - Climbing ability up to 25% - Capable of clearing kerbs up to 15 cm high. - Spray nozzles: 2 – one external and one internal. - Indicator light Dcsdpfjt If A Djx Af Aji

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 16119, Electric pallet truck, Zallys Jespi model, manufactured in 2016. Fully functional, no damage. Features custom-made, high stainless steel side rails that are completely removable. Original, low side rails are included. Maximum load capacity: 500 kg. Previously used for transporting food, well-maintained, and never overloaded. Dcjdpfx Afsy Ubvis Asi

Condition: excellent (used), - Brand: BONGARD Dodpewxmgnsfx Af Aoci - Model: 8.62E - External dimensions: 1430x1930x2220 mm - Tray size: 600x800 mm - Capacity: 150 baguettes - Electric - Power: 56 kW - Voltage: 400 V

Condition: used, -Dimensions: 782x1195x2142 mm -Fixed trolley: 400x800 -Model: 3P12B -Serial no.: 3P12B31 Dcedpfxjwxxius Af Aji -Capacity: 80 baguettes -Voltage: 400V -Power: 31 kW -Weight: 500 kg -Refurbished equipment: the equipment is prepared upon order, pick-up and return dates are agreed at that time (please request the price after refurbishment)

Condition: used, Electric Loading Lift - Mobilift for ergonomic handling of small loads Pedestrian stacker, pallet stacker Manufacturer: TransOrt Model: PRO 140 M Serial No.: P14012557 Year of manufacture: 2018 Rated capacity: 140 kg (with 400 mm outreach) Lifting stroke: 1380 mm Lifting cycles per charge: 140 kg x 1 m x 100 times Lift height: max. 2900 mm (underside of jib) Lifting speed (fast / slow): approx. 100 / 50 mm/s Outreach (load handling device): 890 mm Chassis length: 1100 mm Chassis width: 440 to 740 mm adjustable (internal measurement) Chassis height: 85 mm Underride length: 620 mm Dcedpfopcqdwjx Af Aji Chassis design (front / rear): Ø 80 / 125 mm (2 fixed / 2 swivel castors) Total length: 1450 mm Total width: 635 mm Overall height: 1980 mm Maximum height: 2980 mm (with lifting device extended) Battery capacity: 24 V / 18 Ah - Electric lifting drive via toothed belt with safety mechanism that stops the descent via freewheel as soon as the load contacts an obstacle. - Cable remote control with spiral cable and buttons for 2 lifting speeds - Control panel with emergency stop, on/off, and battery status indicator - Battery pack with quick-change system - 2 x 12 Volt, 18 Ah lead-acid batteries installed in battery pack - Integrated charger 24 VDC, 80 Watts - Manually maneuverable, steering castors with three-level parking brake - Continuously height-adjustable handle - Load pickup quick coupling TAWI system - Flange plate for quick coupling on the jib 30 x 340 mm with 5x M8 threaded holes Net weight of loading lift: 75 kg Installed lifting aid: Counterbalance jib made of 60 x 40 x 3 mm rectangular stainless steel tube Lifting aid capacity: 50 kg Outreach to handle: 865 mm Hanging handle with knurled nut Net weight: 13 kg As new condition, unused ex stock 2 units available, price per unit

Condition: new, New Electric Belt Hoist SWF - PFAFF Silberblau Type ATHLO belt - BH203L3E Textile belt hoist, crane hoist with trolley Serial No.: 3540053G01007 Year of manufacture: 2003 (new - unused) Lifting capacity: 1,600 kg Hook path: 6 meters Main hoisting speed: 6.5 m/min Creeping hoist speed: 1.0 m/min Trolley travel speed: 10 / 2.5 m/min Distance from undercarriage wheel to load hook: approx. 450 mm Pendant control cable length: approx. 6 meters 3 load strands = 1,600 kg Main hoist motor power: 1.9 kW Creep hoist motor power: 0.3 kW Trolley motor power at 10 m/min: 0.25 kW Trolley motor power at 2.5 m/min: 0.06 kW Power connection: 400 Volt, 50 Hz - Emergency stop - Very quiet, low-maintenance, and safe operation - Trolley for I-beams, with 2 travel speeds Dsdpfeypw Hrox Af Asci - Suitable for I-beams with approx. 100 to 200 mm width - TELEMECANIQUE position limit switch type XCR Space required L x W x H: 1100 x 700 x 600 mm Weight: 140 kg As-new condition – unused from stock

Condition: used, Electric chain hoist, DEMAG crane Type PK2N-F Serial no.: 5785034 Year of manufacture: 1988 Load capacity: 500 kg Hook travel: 5 metres Main lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 metres Power supply: 400 Volt, 50 Hz - 2 load chains = 500 kg - Electric trolley DEMAG, type 13/3 PF8 with 1 travel speed approx. 8 m/min, type 13/3PF 8 - For double-T beams with approx. 100 to 200 mm flange width Dcsdjxf Uqfopfx Af Aei Weight: 63 kg Good condition

Condition: used, Electric trolley, electric trolley for chain hoist, crane trolley, trolley, rolling trolley For double T-beam STEEL type GU-A035400 . 0104671 Year of construction 1986 Load capacity approx. 1100 kg Roller diameter approx. 80 mm track width from 65 mm to 110 mm driving speed 12,5 m/min Motor power 0,42 kW Dodpfjl Ab Rtex Af Aeci Mains connection 380 Volt, 50 Hz. weight 20 kg good condition

Condition: good (used), Year of construction: 2023, machine/vehicle number: 11141057, Offer 25033 Technical data: - Total lifting capacity: 1,600 kg - Lifting capacity per chain strand: 800 kg - Lifting height – chain travel approx.: 8 m - 2 lifting speeds: 3.0 / 12.0 m/min - Drive: 400 V - Weight approx.: 160 kg - Space requirements without chain box approx.: W 650 x H 350 x D 650 mm - Space requirements with chain box approx.: W 650 x H 850 x D 650 mm - Handheld remote control Dcsdpfxjwwiwae Af Aei - 1 piece separate redirect support for the second chain strand - 1 piece load pick-up with threaded rod

Operating hours: 800 h, condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 8,000 mm/min, Demag monorail trolley, short design, ready for immediate use, incl. overload protection and electrics, trolley wheels must be replaced, 2x available, KBH140 B2/12 Dodpfeq R Rf Asx Af Ajci

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. Dcedpouzv Tzofx Af Aoi After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Dedpfxouhmace Af Asci Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box

Condition: excellent (used), For sale: Professional Schneider Electric Masterpact NW25 H1 circuit breaker equipped with a Micrologic 5.0 A protection unit. This device is used in industrial power distribution systems—such as low-voltage switchboards, manufacturing plants, industrial halls, and power installations. The Masterpact NW series circuit breakers are designed for demanding industrial environments and provide reliable protection against overloads and short circuits. The unit is in very good visual and technical condition—the exact condition can be seen in the photos. Technical Specifications: Manufacturer: Schneider Electric Series: Masterpact NW Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operating voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Year of production: 2011 Assembly location: Schneider Electric Venray (Netherlands) Dedpfx Afsyua Ame Aeci The circuit breaker protects installations against overloads and short circuits, and allows for adjustment of protection parameters thanks to the Micrologic unit. Applications: • Low-voltage switchboards • Industrial facilities • Power installations • Energy distribution systems • Large machinery and production lines ✔ Robust industrial construction ✔ High breaking capacity ✔ Adjustable Micrologic protection settings ✔ Equipment from the renowned manufacturer Schneider Electric

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Schneider Electric, Altivar 32 frequency converter Dcodpfx Ajxnlwusf Aei -Type: ATV320U11N4B -Power: 1.1 kW -Input: 380-500V / 50/60Hz / 5A -Output: 380-480V / 0-599 Hz / 3 A -Quantity: 1 frequency converter available -Dimensions: 320/45/H230 mm -Weight: 1.7 kg

Condition: good (used), Facom Jet Tool Cart with 8 Drawers Perfect condition, Facom tools. Made in France. Accessories as shown in the photos. Price is for the entire unit. Dcodeyzt Nzspfx Af Aoi

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, overall weight: 14 kg, load capacity: 3 kg, arm reach: 400 mm, Number of Axes / Scara (Horizontal Type) / 4 Axes Maximum Load Capacity / 3 kg Z-axis Stroke / 180 mm Accuracy / ±0.01 mm in the X-Y and Z axes, ±0.01° in the rotation axis Maximum Speed / 7200 mm/s Weight / 14 kg Environmental Protection Class / IP20 Djdpeza D Htefx Af Aoci Mounting Type / Floor-mounted

Condition: excellent (used), Year of construction: 2017, VUTEK H100 3.2m Fast LED Hybrid printer Speed exceeding 450 m²/h Color 6C (white disabled) Roll option 3.2m 2 tables under efi full service new belt installed on 04-26 via efi Dcjdpfx Asza U Saef Asi Recently, 4 new printheads were replaced (defective solder joints on the nozzles).

Condition: used, Year of construction: 2011, functionality: fully functional, power: 3.73 kW (5.07 HP), cutting height (max.): 440 mm, cutting width (max.): 600 mm, pivoting range: 60 °, total height: 1,700 mm, total length: 2,900 mm, total width: 1,300 mm, overall weight: 1,320 kg, Equipment: CE marking, We offer this used semi-automatic band saw TOP-PORĘBA BMT460DSA, year of manufacture 2011. Motor power: 5 HP Cutting diameter at 90° (round cross-section): 460 mm Cutting dimensions at 90° (square): 460 x 460 mm Cutting dimensions at 90° (rectangle): 440 x 600 mm Cutting diameter at 45° (round cross-section): 445 mm Cutting dimensions at 45° (square): 445 x 445 mm Cutting diameter at 60° (round cross-section): 295 mm Dodjyv Ai Hspfx Af Ajci Cutting dimensions at 60° (square): 295 x 295 mm Blade dimensions: 41 x 1.3 x 5330 mm Machine weight: 1320 kg If you have any questions or require additional information, please send us a message or contact us by email.

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Dedpfx Afezcvx Te Asci Laser on time: approx. 45,500 hours Includes Loadmaster.

Condition: new, Year of construction: 2022, functionality: fully functional, Manufacturer: Schneider Electric Model: EF593816 Type: Power Connector Block Configuration: 3-Pole (3P) Mounting Type: Front-connected, fixed installation Dcodpow I Twqofx Af Aoi Series: Ecofit Condition: New Availability: In stock 16 pc Product Overview: The Schneider Electric EF593816 is a 3-pole Ecofit power connector designed for front-connected fixed breakers. This compact and robust unit is ideal for integration into low-voltage power distribution systems, particularly in industrial switchboards and control panels. Features: Compact 3-pole connector block Designed for fixed circuit breaker applications Front terminal access for easy installation Engineered for compatibility with Schneider Electric low-voltage breakers Suitable for panel building and retrofit projects Complies with industrial safety and quality standards

Condition: new, Schneider Electric BRS39AHS0033 / VRDM3910/50LHB Lexium BRS stepper motor, serial no.: 2900272775, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Djdoi D Nvrspfx Af Aeci

Condition: new, Schneider Electric BRS39AHS0033 / VRDM3910/50LHB Lexium BRS stepper motor, serial number: 2900272790, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Dsdpfxoi D Nyve Af Asci