Used Ellerwerk Centrifuge for sale (955)

Condition: like new (used), maximum load weight: 96 kg, load capacity: 77 kg, Reconditioned ATEX centrifuge, model SCA-700. Csdpfx Aierrwcle Sjrh

Condition: used, This listing is for the Sigma 2-15 Centrifuge +Accessories Shown The unit is in full working condition and is ready for immediate use The Sigma 2‑15 is a benchtop (tabletop) laboratory centrifuge produced by Sigma (Sigma Laborzentrifugen GmbH), designed for moderate-speed separation tasks across various scientific and industrial settings Key Features & Specifications: Purpose: Used to separate sample components (e.g., cells, sediments) through centrifugal force—ideal when high speed isn't required Power & Voltage: Operates at 240 W, 220–240 V, 50 Hz Speed: Crjdpfx Aiexhffro Ssh Centrifuge motor: up to 13,500 rpm. Rotor-specific max: up to 15,300 rpm, depending on rotor type . Capacity: Typical configuration includes 4 buckets, each capable of holding up to 100 ml (e.g., rotor 11192 with buckets 13012) Some versions deploy a fixed-angle rotor (e.g., 12189) with capacity around 480 g Dimensions: Compact footprint of approximately 33 × 43 × 30 cm (W × D × H) . Other Features: Microcontroller-based control of speed and time. Multiple acceleration/deceleration curves and program memory (up to 10 programs) in some configurations Magnetic rotor identification (prevents overspeeding) and induction drive for low maintenance

Condition: used, This listing is for the Labnet Spectrafuge 24D centrifuge The unit is in full working condition and is ready for immediate use The Spectrafuge 24D is a compact benchtop centrifuge designed for the efficient separation of a wide range of research samples. Its small footprint makes it ideal for laboratories with limited bench space, while offering the performance and flexibility needed for micro-volume processing. Cedexv Dhnopfx Ai Serh Key Specifications Maximum Speed: Up to 13,300 rpm Maximum RCF (Relative Centrifugal Force): 16,300 × g Capacity: 24 x 1.5/2.0 mL microcentrifuge tubes Motor: Brushless—requires no routine maintenance Timer: Adjustable from 1 to 30 minutes; supports continuous or pulse operation Rotor Type: Easy-access 24-place aluminum rotor, included Adapters Available: For tubes smaller than 1.5 mL (0.5 mL, 0.4 mL, 0.2 mL) Cooling System: Multi-flow air cooling; maintains ambient temperature and is safe for use in cold rooms Control Interface: Digital microprocessor with LED displays; parameters set using two intuitive smart knobs Memory Function: Remembers last run settings Quiet Operation: Engineered for minimal noise Dimensions: 23.5 x 29.2 x 21.6 cm Weight: 8.1 kg Power Supply Options: 120V, 50/60 Hz, 200W, 2.6A (North America) 100V, 50/60 Hz, 190W, 2.7A (Japan) 230V, 50/60 Hz, 170W, 1.2A (Europe/UK)

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Crjdpfx Aisxukkyj Seh Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Year of construction: 2015, operating hours: 6,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 1448380811, Set including: Centrifuge Hydraulic unit 2 feed pumps 1 flocculant pump 1 flocculant preparation tank Csdpfoz Icw Asx Ai Serh 1 electrical control panel

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1011/33, High-quality pharmaceutical laboratory centrifuge HEINKEL V 500 TP – Complete system including control system and accessories NEW PRICE: €330,000 Cjdpfxoz Euz Ij Ai Sjrh For sale is a professional, vertical pilot plant centrifuge of the type HEINKEL V 500 TP in excellent, like-new condition. The system is specifically designed for feasibility studies, product development, and small-scale production in the pharmaceutical and fine chemical industries and meets the highest cGMP standards. This is a complete system ready for immediate use, including the original control cabinet and the integrated operating unit (HMI). Thanks to the mobile stainless steel frame (“Plug and Use”), the system can be moved flexibly within the room or integrated into existing processes. Technical data & highlights: Manufacturer: HEINKEL Drying and Separation Group Model: V 500 TP (Vertical Centrifuge) Year of manufacture: 2021 / 2022 Drum diameter: 500 mm Nominal volume / filling weight: 30 liters / approx. 36–38 kg Material: High-quality stainless steel (product-contact parts with high surface quality, Ra < 0.8 µm) [If applicable, add "Alloy C22 / Hastelloy" here] Approval: CE marking available Documentation: Complete technical documentation Scope of delivery: HEINKEL V 500 TP centrifuge on a mobile stainless steel frame Original, free-standing control cabinet (including cooling unit) Integrated control panel (touch-HMI) directly on the machine Original HEINKEL accessories and tool case

Year of construction: 2012, condition: used, functionality: fully functional, PERMOLEX-POLAR K 81 H – a complete process line for de-oiling and separating metal chips. For sale is a complete industrial system for de-oiling, oil removal, and separation of aluminum and steel chips. Type: Permolex-Polar K 81 H Year of manufacture: 2012 Application: de-oiling and separation of loose aluminum and steel chips Capacity: max. approx. 3.4–6 m³/h Throughput: approx. 160 tons of chips per month Control: Siemens SIMATIC S7-300 / operator panel TP177B Rotational speed: 980 rpm Power supply: 400 V / 50 Hz Offered for sale is a complete set of equipment forming an industrial system for centrifuging liquids from chips and further separating aluminum and steel chips. Cjdpfjz Hw R Uox Ai Sorh The process includes: chip feeding → buffer tank → conveyor → PERMOLEX-POLAR centrifuge → oil/coolant discharge → magnetic separation → chip separation → transport to containers. Chip transfer points are enclosed, which reduces the lifting of material during transport. The system includes: • PERMOLEX-POLAR K 81 H chip centrifuge, • approx. 7.5 m³ buffer tank for chips, • 3 x KF 600 scraper conveyor, • double separating shaft with neodymium magnets, • vibratory conveyor, • approx. 250 l oil/coolant tank, • submersible pumps, • floor trays, • complete Rittal control cabinet, • Siemens S7-300 controller, • TP177B operator panel, • supporting structures and system components. Application The system is designed for the continuous processing of a mixture of aluminum and steel chips. The process includes: chip feeding → de-oiling/oil removal → separation of steel fraction → transport of separated chips to tanks/containers. The system is designed for handling large quantities of material and features automatic control and level monitoring. Technical condition Used equipment from an industrial installation. The photos show signs of normal operation, dirt, and surface wear on the components. It is recommended to inspect and verify the completeness and technical condition of individual components before purchase. Sold as a complete system or individually, as agreed. Due to its size and complex structure, dismantling, loading, and transport require prior agreement. Technical/design documentation regarding the equipment layout can be provided to interested buyers. 📞 Contact Interested parties are invited to contact us for pricing, additional photos, technical documentation, and to arrange an inspection.

Year of construction: 2023, condition: used, functionality: fully functional, Hosokawa Alpine hammer mill Type UPZ 500 Year of construction: 2023 Weight: 1300 kg Capacity/max: 5,910 l/min Dimensions: approx. 230x110x129 cm Documentation available This lot is located in room 3 Hosokawa Alpine centrifugal fan with electric motor on a steel base frame. Codpfx Aijz Iam Io Sorh Details: Brand: Hosokawa Alpine Type: centrifugal fan Drive: electric motor Design: housing with protective cover and connection/piping Frame: steel base frame Color: gray with blue motor Condition: used

Year of construction: 2016, condition: used, Name: Used Centrifugal Fan Manufacturer: REITZ Type: KXE 050-035530-00 Crjdpfx Aijz Innao Ssh Year built: 2016 Speed: 2.960 / 2.809, max.: 3138 rpm Driving force: 45 kW Throughput m³/h: V= 355 m3/min Material: regular steel Dimensions: L 2.300 x W 1.200 x H 1.420 mm Empty weight: Approx. 900 kg Technical doc.: yes, in German language Message: Intake temperature 20° and max. temperature 80°. Is unused, therefore as good as new! Accessories: Legs Condition: Used Price: On request

Condition: good (used), Year of construction: 2009, Equipment: documentation/manual, Name: Decanter centrifuge Manufacturer: Flottweg Type: Z4E-4/454 Year built: 2009 Driving force: 30 kW worm drive (backdrive): approx. 7.5 kW Permissible sediment density: 1,6 g/dm³ Max. bowl speed: 4.200 U/min Inner diameter drum: 420 / 240 mm Drive speed: Flottweg SIMP-DRIVE drive system (frequency converter-controlled) Material: Stainless steel 1.4463 Max. operating temperature: 0 - 100 °C Crjdpfx Aez Ingcsi Soh Dimensions: (L x W x H): approx. 3.500 x 1.000 x 1.200 mm Empty weight: Approx. 3.000 kg Technical doc.: Yes Message: Screw wear protection: Tungsten carbide / chilled cast iron Accessories: Control cabinet Condition: Used-good Price: By request

Year of construction: 2014, condition: ready for operation (used), machine/vehicle number: 5125781, Alfa Laval ALDEC 45 Decanter Centrifuge – For Sale Alfa Laval ALDEC 45 industrial decanter centrifuge in very good working condition. The machine has been well maintained and is suitable for continuous solid-liquid separation applications. Key Specifications: Manufacturer: Alfa Laval Model: ALDEC 45 Year: 2014 Machine / Serial No.: 5125781 Maximum Bowl Speed: 4,200 rpm Main Motor: Approx. 22 kW Back Drive Motor: Approx. 5.5 kW Bowl Diameter: Approx. 360 mm Processing Capacity: Approx. 3–15 m³/h, depending on feed characteristics and separation requirements Continuous industrial operation Heavy-duty stainless steel construction Location: Türkiye Condition: Very good, ready for operation Cjdpfxezu S Uys Ai Serh Suitable for various industrial separation applications, including wastewater treatment, sludge dewatering, chemical processing, food processing and other solid-liquid separation processes. The machine is available for inspection. Additional photos, technical details and videos can be provided upon request.

Condition: like new (used), Year of construction: 2016, volume flow: 5 m³/h, overall weight: 4,900 kg, energy consumption: 35 kWh, peeling centrifuge 3000 rpm , 630 mm diameter bowl Crjdpfevm Ur Aex Ai Soh

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Credszgq Szopfx Ai Soh Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: ready for operation (used), Chip – Centrifuge STEIMEL POLAR / S 5 - Drum diameter (basket) 500 mm - Speed / power: 1000 rpm, adjustable up to a maximum of 1400 rpm Crjdpezylzqsfx Ai Sjh - Includes documentation & electrical diagram Dimensions L x W x H: 0.7 x 0.7 x 1.2 meters / Weight approx. 250 kg Errors and omissions excepted.

Condition: used, AZO E800 screening machine, centrifugal screen Completely overhauled Material: steel, coated Crjdpfx Aez Hc Tuji Soh Includes new bearings, seals for the electric motor, and rotor See our other listings.

Year of construction: 2001, condition: used, filling capacity 40 l Suction height 3000 mm wall strength VA 3,0 mm total power requirement 6/12 kW/A weight of the machine ca. 0,5 t dimensions 1,63 x 0,68 x 1,24 m Used centrifuge for coolants and washing media. Credoz D Ir Rjpfx Ai Sjh - VA welded construction - Power connection V/A 400/16

Condition: used, functionality: unexamined, For sale is a used, single Schuko radial fan with a directly mounted three-phase motor. According to the nameplate, the motor output is 4 kW, the rated speed is 2,900 rpm, the rated voltage is 380 V, and the frequency is 50 Hz. Codpfxsz Iuiwj Ai Sjrh Scope of delivery: fan housing with impeller and mounted electric motor, as shown in the photos. This is not a complete exhaust system. The fan shows age-related and usage-related dirt and paint chipping. No current function test has been performed. Therefore, the functionality of the motor and fan cannot be confirmed. The fan is sold for inspection and possible repair or as a source of spare parts. The year of manufacture, exact model designation, air flow rate, and pressure are unknown. Inspection is possible by appointment at the location in Thun, Switzerland. The fan is sold in its current, untested condition without any guarantee of functionality or warranty. Collection, loading, and transport are to be organized and paid for by the buyer. In the event of export, any applicable customs clearance and import costs will be borne by the buyer.

Condition: like new (used), Year of construction: 2019, Turbo-HKS Centrifugal Barrel Finishing System P100-B250/250-0-PP – New, Unused For sale is a Turbo-HKS centrifugal barrel finishing system in new, unused condition. The machine was manufactured in 2019 and was intended as a pilot system but was never integrated into production. Accordingly, it is in very good condition. Technical data: Manufacturer: Turbo-HKS GmbH, Germany Type: P100-B250/250-0-PP Year of manufacture: 2019 Machine number: 52063 / 15240 Operating voltage: 400 V Frequency: 50 Hz Current consumption: 17.96 A Crodpfxezb Ab Eo Ai Seh Barrel diameter: 350 mm Barrel height: 287 mm Barrel wall thickness: 12 mm Capacity: 250 liters Initial filling: 260 liters Maximum speed: 70 rpm Barrel material: EN AC-AlSi7Mg (T6 heat-treated) Application areas: • Deburring • Polishing • Smoothing • Edge rounding • Surface finishing • Processing of metal and precision parts Special features: • New condition • Unused system • German quality machine • Very robust industrial design • High processing performance • Ideal for series production and precision machining Inspection possible by appointment. Location: Göppingen, Germany

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Credjzw Ucxopfx Ai Sjh Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Csdpfxezw Ug Re Ai Sorh Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,200 mm, total length: 1,700 mm, total width: 1,100 mm, rotational speed (max.): 2,650 rpm, power: 1.6 kW (2.18 HP), water tank capacity: 100 l, RÖSLER RZ 150 A cleaning system – automatic sludge removal For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This unit is designed for industrial use, fully automated, and equipped with modern solutions to increase efficiency and durability. Key parameters: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2650 rpm • Rotor made of aluminum alloy • Steel housing Equipment and functions: • Smooth start and stop thanks to the frequency inverter • Adjustable sludge removal speed • Automatic retraction of the cleaning blade • Automatic removal of remaining water • Electronic vibration control Crodpfxozca Ape Ai Seh • Automatic rotor flushing • Special bearing lubrication system to extend the unit's service life Central control unit E61-400: • Control and monitoring of the cleaning system • E61-400 control unit • SIEMENS S7-1200 controller • Ensures automatic and stable operation of the entire system Sludge removal time is adjustable from 2 to 5 minutes, depending on the consistency. A single cycle removes up to 25 kg of sludge. Additional system equipment: • Sandpiper P9 diaphragm pump for supplying water to the centrifuge • Pump operation cycle control • Water level control in the tank The set also includes a P 100 SB-P9 buffer tank for residual dirty water from the centrifuge. The tank is required if the centrifuge is located far from the source of dirty water. P 100 SB-P9 buffer tank: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor flushing water to the buffer tank • Made of durable HDPE polyethylene (black color) • Sloping, 3-sided funnel-shaped bottom • P9 diaphragm pump – operating pressure 4 bar • Water level control RSKM 30 waste container: • Capacity: 300 l • Dimensions: 1300 x 820 x 800 mm • Manual operation • Can be transported and emptied using a forklift • Made of steel • Discharge port with drain plug • Equipped with a tilting mechanism The unit is robust, efficient, and ready for operation.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Internal article number: 26098 Centrifuge Rösler Z 1000 ASS-2 Turbo Year of manufacture: 2006 Last maintenance performed with service report from 02/2026 Crjdpfx Aiez Dg T Ho Ssh The system is fully functional and in good condition. Operating hours according to the maintenance report: approx. 32,000 hours (as of 02/2026) Dimensions (L x W x H): Centrifuge: 110 x 150 x 230 cm Lift pump: 50 x 70 x 80 cm Demineralized water tank: 120 x 240 x 210 cm Please note that you can find the suitable vibratory finishing system among the other offers.

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Credpfx Asz Hxbuoi Seh

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Crsdpfxepu A D Ae Ai Ssh Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: used, This listing is for the Hereaus Sepatech Biofuge 15R Refrigerated Centrifuge Cedpfx Aioxzidlo Sjrh The Heraeus Sepatech Biofuge 15R is a benchtop high-speed refrigerated laboratory centrifuge designed for centrifugation tasks in research, clinical diagnostics, molecular biology, and biotechnology settings. It combines rapid spinning performance with active cooling to preserve temperature-sensitive samples during separation processes