Used Engel 200/80 Tech Cc200 for sale (34,017)

Condition: excellent (used), Year of construction: 2006, operating hours: 69,000 h, functionality: fully functional, machine/vehicle number: 163769, Here we offer a permanent maintained injection molding machine. from the following machine we have other machines of the same type and same year in stock also with Geiger Robot Manufacturer Engel Type Victory 200/80 Tech year of construction: 2006 Control system: CC 200 Extras -installed Languages: German Englisch -25 mm (wear and corrosion protected) - control CC200 - enlarged clamping plates (B plates) - minimum installation height 250 mm - maximum platen distance 700 mm - quality switch / PD protocol + graphics - 5 x CEE 400 V / 3 x Schuko 230 V - 4 freely programmable inputs and outputs - handling interface Euromap 12 - Host computer interface Engel EMS - Geiger EA Mini 2001 SLI (#156686 0504 4417 / year 2005) - without material hopper or conveyor Clamping unit Kjdpfjm Nclvox Ai Eolt clamping force: 80 to./ 800 kN tie bar dimension: tie bar-less clamping platens: 730 x 600 (hxv) platen distance: 700 mm max installation height: 250 mm min. opening stroke: 450 mm Injection unit screw diameter 25 mm stroke volume: 69 ccm injection pressure: 2090 bar / 2400 increased Weight: 5,200 kg. dimensions: 4,00 mtr. x 1,40 mtr. x 2,00 mtr LxWxH from our warehouse Hannover /Germany free loading on truck of the buyer or free delivery against freight reimbursement Viewing under electric power possible functional guarantee

Condition: excellent (used), Year of construction: 2012, Engel e-victory 200/80 with Engel Viper 12 Robot / Electric Machine / Operating hours: approx. h in automatic mode Year of manufacture: 2012 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 71 g Injection pressure: 2400 bar Dosage volume: 85 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: electric Clamping unit: hydraulic Kjdpfey Smmbjx Ai Eslt Control system: CC 200 – touchscreen Additional equipment: Production line with Engel Viper 12 Machine is in very good technical condition Electric machine: energy-efficient and very quiet Operating hours: approx. in automatic mode Air valve x 4 Hydraulic core pull x 1 Controller with 12 hot runner zones Injection unit is wear-resistant and corrosion-resistant Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Kistler sensor – mold pressure regulation Parallel movements Engel Viper 12 Robot Year of manufacture: 2012 5-axis robot: 3 axes driven by servomotors (electric): X, Y, Z; B-axis pneumatic and C-axis Touch control panel Robot safety package Robot with adapter, conveyor belt and safety enclosure Purchase of robot and conveyor at extra charge Dimensions: Weight: 5500 kg Length/Width/Height: 4.40x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Engel Victory 500/80 Tech / Production Line with Engel Viper 12 Robot Kjdpfxjy Sml Rj Ai Ejlt Year of manufacture: 2011 Injection Unit: Screw diameter: 45 mm Shot weight: approx. 295 g Injection pressure: 1,598 bar Dosage volume: 318 cc Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 670x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - touchscreen Additional equipment: Tie-bar-less machine Euromap 67 Robot interface 3x hydraulic core pull Injection unit hardened - bimetallic Robot Engel Viper 12 Year of manufacture: 2014 5-axis robot: 4 axes driven by servo motors (electric); Axis A - pneumatic Touch control panel Robot with adapter and protective housing with part separator Robot available for purchase at additional cost Dimensions: Weight: 5,300 kg Length/Width/Height: 4.57x1.48x2.38 m Drive: Pump/motor: 15 kW All offered machines are started up and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2005, operating hours: 81,700 h, clamping force: 45 kN, displacement volume: 69 cm³, injection pressure: 2,400 bar, overall weight: 3,300 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: % prior to delivery Manufacturer: Engel Type: VICTORY 200/45 Tech + er/usp Kljdpfx Aorbqtnji Ejt Condition: aus laufender Produktion Operating hours: ca. 81.700 CLAMPING UNIT: - Clamping force: 45 t Öffnungsweg: 355 mm Mould installation height min.: 175 mm Mould installation height max.: - Tie bar distance (h x v): holmlos Plate dimension (h x v): 550 x 430 mm Centering (fix- movingplate): / mm INJECTION UNIT: IU200 Screw diameter: 25 mm Injection weight in polystyrol: 63 g Stroke volume: 69 cm³ Einspritzdruck: 2.400 bar CONTROL: CC Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 1 Air valves: - Hot runner control devices: - Robot interface: Angußpicker er/usp Other equipment: Nadelverschl. Hydr., Schnittstelle Dosier- und Temperiergerät GENERAL DATA: - Installed heating capacity: 6,8 kW Pump drive power: 11 kW Total installed power: Motor + Heizung Total weight: 3.300 kg Total size L x B x H: 3,3 x 1,2 x 2,2 m

Condition: good (used), Year of construction: 2009, operating hours: 70,171 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 22 mm, displacement volume: 38 cm³, ENGEL VICTORY 80-90 tech Stock No.: 503415 Manufacturer: ENGEL Type: VICTORY 80-90 tech Control: CC200 Year of manufacture: 2009 Operating hours: 70,171 h Technical Data – Clamping Unit Clamping force: 900 kN Platen size (HxV): 740 x 680 mm Minimum mould height: 300 mm Max platen daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 38 ccm Injection pressure: 2,060 bar Screw L/D ratio: 19 l/d Screw stroke: 100 mm Screw speed: 360 min⁻¹ Free flow rate: 78 g/s PS Number of heating zones: 4 Nozzle stroke: 230 mm Kledpfxsytfccs Ai Est Dimensions & Weight Machine dimensions (LxWxH): 4.4 m x 1.5 m x 2 m Total weight: 6,700 kg Equipment Display language: German CEE socket 16A 1x hydraulic core pull 2x air valves Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A 4x mould heating circuits

Condition: good (used), Year of construction: 2004, operating hours: 83,909 h, functionality: fully functional, clamping force: 700 kN, screw diameter: 25 mm, displacement volume: 69 cm³, ENGEL VICTORY 200/70 Tech Stock no.: 503474 Manufacturer: ENGEL Model: VICTORY 200-70 Tech Control unit: CC100 Year of manufacture: 2004 Operating hours: 83,909 h Technical data – Clamping unit Clamping force: 700 kN Platen size (H x V): 670 x 600 mm Minimum mold height: 144 mm Maximum daylight: 594 mm Opening stroke: 450 mm Ejector stroke: 100 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Max. mold weight: 675 kg Technical data – Injection unit Screw diameter: 25 mm Shot volume: 69 ccm Injection pressure: 2,090 bar Screw stroke: 140 mm Screw speed: 480 RPM Free injection flow (PS): 104 g/s Number of heating zones: 4 Nozzle stroke: 200 mm Dimensions & Weight Machine dimensions (LxWxH): 4m x 1.45m x 2m Total weight: 5,200 kg Equipment Klodpoytdiuofx Ai Est Screen text in German Screen text in English CEE socket 16A Hydraulic core pull 1x Air valve 1x Machine with material hopper Machine with water manifold Leveling elements Schuko socket 10A

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,496 h, clamping force: 600 kN, screw diameter: 35 mm, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 600 kN Kjdpox D Dkxsfx Ai Eelt This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine Kodpfexgi Etsx Ai Ejlt Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2003 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Steuerung: CC100 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2004, 1,0 St. gebr. Spritzgießmaschine Kodpexg H Hbofx Ai Eelt Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2004 Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Steuerung: CC200 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: excellent (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 200/28 TECH Baujahr: 2007 Schließkraft: 28 Tonnen Ksdpfxou Eu Tno Ai Ejlt Holmabstand: HOLMLOS Schnecken DN: 25 mm Max. Hubvolumen: 49 ccm³ Spritzteilgewicht 44 g/PS Steuerung: CC200 Ausstattung: - 1 x Kernzug

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Kodey Au I Ujpfx Ai Eolt Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Kodpfjwm Iz Nox Ai Eelt Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: excellent (used), Year of construction: 2016, Machine designation: VC 330H/200V/80 Combi Clamping unit: Clamping force: 80 tons Opening stroke: 458 mm Ejector stroke: 100 mm Ejector force: 39.8 kN Injection unit 1: Screw diameter: 25 / 30 / 35 / 40 mm Max. swept volume: 79 / / 154 / 201 cm³ Screw speed max: 400 / 425 / 400 / 320 rpm Screw speed max current: 425 rpm Injection rate: 67 / 97 / 132 / 172 cm³/s Injection rate increased: 50 / 71 / 97 / 127 cm³/s Specific injection pressure: 2401 / 2181 / 1595 / 1225 bar Kledpfeyyzzvsx Ai Ejt Specific injection pressure increased: bar Nozzle stroke: 500 mm Nozzle contact pressure: 48.9 kN Injection unit 2: Screw diameter: 15 / 18 / 22 / 25 mm Max. swept volume: 18 / 25 / 99 / 49 cm³ Screw speed max: 480 / 480 / 480 / 480 rpm Screw speed max current: 480 rpm Injection rate: 37 / 54 / 149 / 104 cm³/s Injection rate increased: 28 / 40 / 98 / 77 cm³/s Specific injection pressure: 2200 / 2200 / 1451 / 1230 bar Specific injection pressure increased: bar Nozzle stroke: 380 mm Nozzle contact pressure: 40.7 kN Type: Multicomponent Drive: Hydraulic

Condition: used, Year of construction: 2007, operating hours: 70,000 h, clamping force: 120 kN, displacement volume: 154 cm³, injection pressure: 2,175 bar, overall weight: 7,300 kg, screw conveyor diameter: 35 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC Tech + ERC23/1-F Condition: aus laufender Produktion Operating hours: ca. 70.000 CLAMPING UNIT: - Clamping force: 120 t Öffnungsweg: 500 mm Mould installation height min.: 300 mm Mould installation height max.: - Plate dimension (h x v): 790 x 680 mm Centering (fix- movingplate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Injection weight in polystyrol: 141 g Stroke volume: 154 cm³ Einspritzdruck: 2.175 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 Air valves: ja Hot runner control devices: - Robot interface: Engel integrated Other equipment: inkl. ERC 23/1-F mit integrierten Ablageband (Bediengegenseite) +750mm, Nadelverschluss (hydr. + pneumat.), Schnittstelle Farbdosierer und Temperiergerät. GENERAL DATA: - Installed heating capacity: 9,2 kW Pump drive power: 15 kW Total installed power: Motor + Heizung Total weight: 7.300 kg Kledeqy Ukljpfx Ai Est Total size L x B x H: 4,4 x 1,4+0,8 x 2,0 m

Condition: reconditioned (used), Year of construction: 2004, Engel 2-shot injection molding machine (horizontal and vertical) 80 tons clamping force also for moulds INDEX. Year 2004, approx. 58.000 hours. This machine will be delivered re-conditioned (Full checked tested and operative) Ask us about our service of Start up. Klodpfx Asp At Udei Ejt Technical details CLAMPING FORCE 800 kN YEAR OF BUILDING 2004 WORKING HOURS 58.332 SCREW DIAMETER 18 mm horizontal SCREW DIAMETER 30 mm vertical TRAVEL OPENING 457mm INJECTION PRESSURE 2207 BAR (horizontal) INJECTION PRESSURE 1451BAR (vertical) INJECTION VOLUMEN 26cm3 (horizontal) INJECTION VOLUMEN 99cm3 (vertical)

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 800 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Demag, type 80/420-200 System The machine is in good and functional condition ATTENTION: No backup disks available Kedsnfu I Ispfx Ai Ejlt Technical data: Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance V: 420 mm Tie bar distance H: 420 mm Plate size H: 590 mm Plate size V: 600 mm Minimum installation height: 250 mm Maximum plate distance: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Tool weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5*1.50*2 m Weight: 4t Transport and loading can be organized Europe-wide at extra cost on request. Prices plus VAT Inspection possible by appointment. Contact us, our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Year of construction: 2008, operating hours: 50,500 h, clamping force: 700 kN, Used injection moulding machine Manufacturer: Engel Model: VC200/70 Tech Year of manufacture: 2008 18 mm screw 50,500 operating hours Clean room Full technical details: see last image Location: Germany - Erzgebirge ____ Klsdsyxd R Ropfx Ai Eot Our General Terms and Conditions (GTC) apply. The seller accepts no liability for typographical or data transmission errors. The appearance of the items offered corresponds to their age and the images shown. The technical condition and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial buyers and without warranty.

Condition: used, Year of construction: 2007, clamping force: 120 kN, displacement volume: 154 cm³, injection pressure: 2,177 bar, overall weight: 7,300 kg, load hours: 62,000 h, screw conveyor diameter: 35 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Engel Type: VC Tech + ERC23/1-F Condition: aus laufender Produktion Operating hours: ca. 62.000 CLAMPING UNIT: - Kledsqxympspfx Ai Eot Clamping force: 120 t Öffnungsweg: 500 mm Mould installation height min.: 300 mm Mould installation height max.: - Plate dimension (h x v): 790 x 680 mm Centering (fix- movingplate): 125/125 mm INJECTION UNIT: SPE330 Screw diameter: 35 mm Injection weight in polystyrol: 141 g Stroke volume: 154 cm³ Einspritzdruck: 2.177 bar CONTROL: CC200 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 Air valves: ja Hot runner control devices: - Robot interface: Engel integrated Other equipment: inkl. ERC 23/1-F mit integrierten Ablageband (Bediengegenseite) +750mm, Nadelverschluss (hydr. + pneumat.), Schnittstelle Farbdosierer und Temperiergerät. GENERAL DATA: - Installed heating capacity: 9,2 kW Pump drive power: 15 kW Total installed power: Motor + Heizung Total weight: 7.300 kg Total size L x B x H: 4,4 x 1,4+0,8 x 2,0 m

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 199583, clamping force: 1,800 kN, screw diameter: 35 mm, injection pressure: 1,595 bar, ejector force: 80,000 N, opening stroke: 1,050 mm, TECHNICAL DETAILS Clamping force: 1,800 kN Platen size (H x V): 880 x 830 mm Minimum mold height: 300 mm Maximum opening stroke: 1,050 mm Maximum ejector stroke: 180 mm Ejector force: 80 kN Injection unit Screw diameter: 35 mm Shot volume: 154 cm³ Maximum screw speed: 320 rpm Injection pressure: 1,595 bar Injection rate: 151 cm³/s Nozzle stroke: 500 mm Kedpfx Aiexuqh So Eslt MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,720 x 1,350 x 2,020 mm Net weight (incl. control cabinet): 11.7 t EQUIPMENT ENGEL ecodrive SHV2 (servo-hydraulic drive) Quick-clamping system Core pull control Thermoset package ENGEL Viper 40 robot integrated with RC200-A03 control ROTOFEEDER BMC50 with frequency converter and dedicated programming interface Microcomputer CC200 with 15'' TFT color touchscreen

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, ENGEL VC 1050/150Tech Screw: Ø 50 mm CLAMPING UNIT Clamping force: 1500 kN Opening stroke: 607 mm Ejector stroke: 150 mm Kjdpfoy Rn E Aox Ai Eslt Ejector force: 61 kN DRIVE Pump drive power: 30 kW INJECTION UNIT 1 Screw diameter: 50 mm Max swept volume: 422 cm³ Screw speed max: 250 r/min Screw speed current: 250 r/min Injection rate: 210 cm³/s Injection rate incr.: 165 cm³/s Spec. inj. pressure: 1955 bar Spec. inj. pressure+: 2332 bar Nozzle stroke: 350 mm Nozzle cont. pressure: 67.2 kN

Condition: good (used), Year of construction: 2008, Clamping force: 80 t Screw diameter: 35 mm Distance between tie bars V: 600 mm Distance between tie bars H: 670 mm Shot volume: 154 cm3 Type: Horizontal Ksdpfsyarxdex Ai Eelt Drive: Hydraulic Engel e-victory 310/80 Year of manufacture 2008, 48765 engine hours Machine weight 5700Kg Prümer sneku 35mm, standard Minimum mold height 245mm, distance between plates 635mm pri maximum opening Dimensions of clamping plates 670x600mm, diameter of the central ring 125mm Closing force 80 tonnes (800kN) Maximum injection pressure 2000bar, injection speed 222mm/s Maximum stroke volume 160mm (154cm") Number of circuit coolers 12 with float pressure gauge (8x fixed side, 4x movable) 1x control of hydraulic cores Integrated regulator and 24 heating zones.

Condition: excellent (used), Year of construction: 2015, Engel Victory 200H/60W/180 combi / production line with robot Engel Viper 20 Year of manufacture: 2015 Injection unit: Screw diameter: 22 mm Injection weight: approx. 54 g Injection pressure: 2392 bar Metering volume: 61 ccm Clamping unit: Clamping force: 180 t tie bar distance: 0x0 mm size of clamping platens: 1020x980 mm ejector: hydraulic clamping unit: toggle lever Control: CC 300 - touch screen Additional equipment: 2K machine with the original Engel Viper 20 robot. tie-bar-less machine, hybrid: energy-saving, high-speed and very silent Operating hours: approx. 20.000 h in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control with hot runners x 36 Reinforced injection units - bimetal The second injection unit is set at an angle, screw diameter fi 15 mm (18 cm³ / 2203 bar) Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Kistler sensor - mold pressure control Parallel movements The machine has an additional servo motor to drive the mold Outputs / inputs for peripheral devices Robot Engel Viper 20 Kedpfsy Sl H Tsx Ai Eolt Year of manufacture: 2015 High-speed robot, 5-axes: X, Y, Z, A, C axes are driven by servo motors (electric) Robot is integrated with the machine and has the additional control panel The safety package for robots Robot with adapter and protective housing Dimensions: Weight: 13200 kg Length/width/height: 5.86x1.98x2.51 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, Producer: SERVOTECH Kedpfsqk U Dlsx Ai Ejlt Model: VCC 200 Type: Vacuum bowl cutter Dimensions: 2600 x 2200 x 1900 mm Power supply: 400V 50Hz 3N Power: 63 kW Bowl capacity: 200 l Capacity: 140 kg Number of knives on the head: 6 pcs. Shaft speed: 200/1800/3600 rpm Bowl speed: 5-15 rpm Loading: hydraulic for 200 l bins

Condition: used, Year of construction: 2012, functionality: fully functional, The bunker conveyor belt from Trio technik is for sale; original price €6,200. Length: 1800 mm Usable width: 200 mm Overall width: 270 mm Cleat height: 30 mm with a pitch of 150 mm Kjdpfx Aisxqdygo Eelt Belt inclination angle: 60 degrees Stainless steel hopper with approx. 110 liters capacity Raised side guides, 130 mm high PVC covers throughout Discharge height: 1275 mm With Schütz control unit, max. 1 kW Machine dimensions: L: 1450 mm, W: 550 mm, H: 1825 mm

Condition: excellent (used), Year of construction: 2011, Engel Victory 1350/260 Tech Ecodrive with Engel Viper 20 Robot / Hybrid Machine Year of Manufacture: 2011 Injection Unit: Screw diameter: 55 mm Shot weight: approx. 590 g Injection pressure: 2183 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 260 t Tie-bar spacing: 0x0 mm Platen size: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional Equipment: Production line with Engel Viper 20 Robot Machine in very good technical condition Tie-barless hybrid machine: energy-saving and very quiet 8x air valve on the fixed platen side 2x hydraulic core pull on the fixed platen side 2x hydraulic core pull on the moving platen side 18 hot runner control zones Injection unit is wear-resistant and corrosion-proof Main drive motor – servo motor with inverter – energy-saving Proportional valve on injection unit – precise injection Engel Viper 20 Robot Year of Manufacture: 2011 6-axis robot: 4 axes (X, Y, Z, B - rotation) driven electrically by servo motors; axes A and C – pneumatic Robot safety package Robot with adapter, conveyor belt, and Engel brand safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 19,400 kg Length/Width/Height: 7.06x2.03x2.30 m Klodpfx Ajy Sl Iqsi Eet All offered machines are started and tested by our service technicians before sale. A video of the technical tests of the selected machine can be provided, or you can attend live technical tests at our facility in Łódź. Price: On request