Used Engel Insert 330H/90 (2004) Vertical Rotary Table 1100Mm for sale (33,537)

Condition: excellent (used), Year of construction: 2004, Engel INSERT 330H/90 Controll: CC100 Condition: funtional Vertical machine with Horizontal injection Rotary table diameter: 1100mm Clamping force: 90 ton Opening max. : 570 Opening min. : 270 Platen size: 590x340 Screw: 40 mm Screw length: 160 mm Injection volume: 201 cm3 Iaedpfou Dbkdjx An Djr Injection pressure: 1230 bar Motor: 15 kw Weight: 5600 kg Height 2800 mm

Condition: good (used), Year of construction: 2004, Engel INSERT 200H/40 Control: CC100 Condition: fully funtional Isdpfotrhv Sox An Djar Clamping force: 400 kN Opening stroke: 300 mm Ejector force: 20 kN Ejector travel: 100 mm Opening max. : 570 Opening min. : 270 Platen size: 590x340 mm Screw: 25 mm Screw length: 140 mm Injection volume: 69 cm3 Injection pressure: 2090 bar Weight: 5400 kg Pump drive power: 15 kW

Condition: used, Year of construction: 2013, Clamping Force: 60 tons (600 kN) Injection Unit Orientation: Vertical Rotary Table: Included Screw Diameter: 25 mm Shot Size: Around 4.4 oz (125 g) Injection Pressure: Up to 210 bar Injection Speed: Approximately 139 mm/s Mould Opening Stroke: 305 mm Iodpfx Ajwp E Hzsn Doar Ejector Stroke: 106 mm

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Iodpewugczjfx An Djar Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle Iedpfx Anjyr Nums Dsar

Condition: used, Year of construction: 2015, functionality: fully functional, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Ijdeukg Sropfx An Doar Index values: 3 4 6 8 12 Year of manufacture: 2015 Weight: 66 kg Table size: 400x620mm

Condition: good (used), Execution : . - Clamping surface D = 400 mm - Overall height 196 mm - . - 3-jaw chuck TOS , D = 250 mm , very good condition Iedoylpztspfx An Dear .

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet Iaodpfxsu Su Apo An Dsr and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Year of construction: 1964, condition: used, -WKG 429- Offered here is a grinding machine from the company Naxos Union. This is a vertical rotary table surface grinding machine with 2 vertical grinding spindle units. Technical data: Manufacturer: Naxos Union Type: FRDA 600/1000 Year of manufacture: 1964 Rotary table: Ø 1100mm grinding wheels Ø: shrink head 475/254 Grinding wheels Ø: finishing head 457/357 Iasdpog Nt Dbefx An Der Weight: 8t Grinding method: segmental grinding Segment grinding heads: 2 pieces Accessories: Dressing device Water box with paper belt filter Marposs control

Condition: excellent (used), Year of construction: 2007, Engel Insert 80V/80V/100 2F / 2-K tie-bar-less machine, vertical / Perfect technical condition Year of construction: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Injection pressure: 1214 bar Dosing volume: 54 ccm Iodjy Dqlrepfx An Doar Clamping unit: Clamping force: 100 t tie bar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control unit: CC 200 Additional equipment: Tie-bar-less machine with two vertical injection units, with turntable Air valve x 6 Hydraulic core puller x 2 Control unit with hot runners x 12 Infrared safety curtains Thermoplastic and rubber injection units are available for this machine Turntable diameter: 1200 mm The machine has been regularly serviced by the authorized Engel service in Germany Dimensions Weight: 9400 kg Length/width/height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW Price: On request

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Iedpfsfvqmxox An Doar Hydraulic

Condition: excellent (used), Year of construction: 2013, Engel Victory 330H/80V/160 combi Ecodrive / Production line with the Sepro SR S5-25 S3 Trans robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2013 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2385 bar Dosing volume: 113 ccm Clamping unit: Clamping force: 160 t Distance between tie bars: 0x0 mm Size of the clamping plates: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total number of operating hours: 24,312 h Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Screw diameter in the vertical injection unit: ⌀22 mm - approx. 28 g/hp It is possible to purchase a turntable Robot Sepro SR S5-25 S3 Trans Year of construction: 2013 3-axis robot: 3 axes are driven by servomotors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 8700 kg Length/width/height: 5.35x1.76x3.42 m All offered machines are started by our service technicians before sale. Iodpfx Ajy Dqmcen Dear It is possible to obtain a video of technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2017, Engel Victory 330H/200V/140 combi Ecodrive / Production line with the Sepro Multi Inject 20 robot / Operating hours: approx. 18,000 h in automatic mode Year of construction: 2017 Injection unit: Screw diameter: 30 mm Injection weight: approx. 100 g Injection pressure: 2400 bar Dosing volume: 113 ccm Iedpfx Asy Dql Ssn Dear Clamping unit: Clamping force: 140 t Distance between tie bars: 0x0 mm Size of the clamping platens: 750x750 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - touch screen Additional equipment: 2K injection molding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed and very quiet Very good technical condition Operating hours: approx. 18,000 in automatic mode Total number of operating hours: 25,369 h Euromap 67 Robot interface Air valve x 8 Hydraulic core pull x 5 Control unit with hot runners x 16 Reinforced injection units - bimetal Main motors - 2 x servo motor controlled with inverter Proportional valves on injection units - precise spraying Parallel movements Built-in pressure quality control system from Sensor Kistler - mold pressure measurement Screw diameter in the vertical injection unit: ⌀25 mm - approx. 58 g/hp It is possible to purchase the original Foboha turntable for an additional charge Turntable diameter: 740 mm Sepro Multi Inject 20 robot Year of construction: 2017 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel distances in axes approx.: X-4000, Y-1200, Z-1500 Automatic axis lubrication Touch control panel The safety package for robots Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions Weight: 10300 kg Length/width/height: 5.56x1.76x3.46 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2009, Clamping force: 90 t Screw diameter: 30 mm Screw diameter 2: 25 mm Iasdey Duaaspfx An Dor Type: Multicomponent Drive: Hydraulic

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from cleanroom production (pharmaceutical sector) - Equipped with 820 mm rotary table Isdpfxeub Umqo An Dear - Including GEKU Robot SR 500 ST (x=600, y=1400, z=2500 mm) - Only 33,107 operating hours - Safety enclosure / protective cage - Horizontal conveyor belt - Hardly any paint damage / almost as new in appearance - Fully operational The machine can be inspected under power by prior arrangement. Technical Specifications Manufacturer: Engel Model: V 330H/80V/130 Combi 2-Color with rotary table Serial number: 162036 Year of manufacture: 2006 Operating hours: 33,107 h Dimensions L/W/H: see drawing Weight: 10,600 kg Functionality: fully operational Condition: excellent Special features Control system: CC 200 Screw diameter: 25 / 22 mm Shot weight: 72 / 35 g Injection pressure: 2391 / 2066 bar Injection volume: 79 / 38 cm³ Clamping force: 1300 kN / 130 tons Tie bar spacing: tie-bar-less Ejector stroke / force: 61 kN / 100 mm Clamping unit: hydraulic Motor power: to be provided Heating capacity: to be provided Total power: to be provided The machine is immediately available from our warehouse in Hannover, Germany, and has been tested. Extras 2-component / 2-color machine Rotary table (820 mm diameter) Geku Robot SR 500 ST Safety enclosure / protective cage CC 200 control, German and English languages GEKU Robot Details SR 500 ST Control: Simotion X axis: 600 mm Y axis: 1400 mm (vertical) Z axis: 2500 mm (horizontal) A flip axis: SWM 45 C axis: Servo Gripper: SWS16 B axis: not available Warranty Warranty up to initial commissioning Loading/Shipping Free loading onto buyer's truck or free delivery against freight reimbursement from our warehouse in Hannover, Germany Financing – on request – leasing option Price on request

Condition: excellent (used), Year of construction: 2016, Machine designation: VC 330H/200V/80 Combi Clamping unit: Clamping force: 80 tons Opening stroke: 458 mm Ejector stroke: 100 mm Ejector force: 39.8 kN Injection unit 1: Screw diameter: 25 / 30 / 35 / 40 mm Max. swept volume: 79 / / 154 / 201 cm³ Screw speed max: 400 / 425 / 400 / 320 rpm Screw speed max current: 425 rpm Injection rate: 67 / 97 / 132 / 172 cm³/s Injection rate increased: 50 / 71 / 97 / 127 cm³/s Specific injection pressure: 2401 / 2181 / 1595 / 1225 bar Specific injection pressure increased: bar Iasdpfx Aoyyzzven Dor Nozzle stroke: 500 mm Nozzle contact pressure: 48.9 kN Injection unit 2: Screw diameter: 15 / 18 / 22 / 25 mm Max. swept volume: 18 / 25 / 99 / 49 cm³ Screw speed max: 480 / 480 / 480 / 480 rpm Screw speed max current: 480 rpm Injection rate: 37 / 54 / 149 / 104 cm³/s Injection rate increased: 28 / 40 / 98 / 77 cm³/s Specific injection pressure: 2200 / 2200 / 1451 / 1230 bar Specific injection pressure increased: bar Nozzle stroke: 380 mm Nozzle contact pressure: 40.7 kN Type: Multicomponent Drive: Hydraulic

Condition: used, Year of construction: 2020, operating hours: 4,200 h, clamping force: 90 kN, displacement volume: 113 cm³, injection pressure: 2,400 bar, overall weight: 7,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) Isdpfx Anjv S H N Re Dsar delivery time: on request terms of payment: 100% prior to delivery

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Hersteller: ENGEL Iajdpfey Au I Usx An Dsr Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg

Condition: used, Year of construction: 2011, USED PLASTIC INJECTION MOULDING MACHINE Manufacturer: ENGEL, Model: Insert 200H/70 Configuration: Rotary table Clamping force: 70 t Year of manufacture: 2011 - well maintained, serviced, no oil leakage. Commissioning date: 09.06.2011 Iaodpfsyx St Tex An Dsr Operating hours: 57,077 h Injection unit: 30 mm Control system: CC200 Weight: 6,200 kg Special features: - Light curtain - Freely programmable inputs and outputs - 9 freely programmable inputs can be programmed station-dependent - 9 freely programmable outputs - Handling interface: Euromap 67 - Charge amplifier for pressure-dependent holding pressure switchover, including corresponding graphical pages - 3 potential-free monitoring inputs for monitoring of peripheral equipment such as temperature control units - Euromap 63 interface for integration into machine data acquisition systems - Hot runner control / shut-off nozzle control

Condition: good (used), Year of construction: 2009, operating hours: 70,171 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 22 mm, displacement volume: 38 cm³, ENGEL VICTORY 80-90 tech Stock No.: 503415 Manufacturer: ENGEL Type: VICTORY 80-90 tech Control: CC200 Year of manufacture: 2009 Operating hours: 70,171 h Technical Data – Clamping Unit Clamping force: 900 kN Platen size (HxV): 740 x 680 mm Minimum mould height: 300 mm Max platen daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Iasdpeytfccsfx An Djr Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 38 ccm Injection pressure: 2,060 bar Screw L/D ratio: 19 l/d Screw stroke: 100 mm Screw speed: 360 min⁻¹ Free flow rate: 78 g/s PS Number of heating zones: 4 Nozzle stroke: 230 mm Dimensions & Weight Machine dimensions (LxWxH): 4.4 m x 1.5 m x 2 m Total weight: 6,700 kg Equipment Display language: German CEE socket 16A 1x hydraulic core pull 2x air valves Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A 4x mould heating circuits

Condition: ready for operation (used), Year of construction: 2011, clamping force: 400 kN, screw diameter: 18 mm, overall weight: 5,850 kg, controller manufacturer: ENGEL, controller model: n/a, This Engel Insert 80V/40 was manufactured in 2011. A vertical injection moulding machine, it's ideal for precision thermoplastic parts. Consider the opportunity to buy this Engel Insert 80V/40 vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits • Ejector travel: 105 mm • Nozzle travel: 380 mm • Turntable diameter: 1200 mm • Rotary table drive: hydraulic • Ejector drive: hydraulic • Connected load: 22 kw Iedpfxex D Nm Eo An Doar • Maximum opening 520mm /minimum opening 185mm Extra Information Machine still under power

Year of construction: 2011, condition: ready for operation (used), Clamping force: 700kN, Opening stroke: 305mm, Ejector stroke: 105mm, Ejector force: 20kN, Screw diameter: 30mm, Shot volume: 99cm³, Speed: 480rpm, Injection pressure: 1451bar, Weight: approx. 6200kg, Control system: CC200, Operating hours: 57077h. Documentation available. An on-site inspection is possible. Iodpfxoyxgqge An Doar

Condition: excellent (used), Year of construction: 2006, operating hours: 33,108 h, functionality: fully functional, clamping force: 1,300 kN, screw diameter: 25 mm, displacement volume: 79 cm³, injection pressure: 2,398 bar, ejector force: 6,100 N, ejector stroke: 100 mm, opening stroke: 606 mm, plate length: 750 mm, plate width: 850 mm, overall weight: 10,600 kg, Equipment: documentation/manual, Technical Details Manufacturer: Engel Model: V 330H/80V/130 Combi Cleanroom Year of manufacture: 2006 Operating hours: 33,107 h Screw: 25/22 mm Machine weight: 10,600 kg Additional equipment included: GEKU SR 500 ST robot Safety enclosure Rotary table Iajdpfx Anot A Ui Ao Dsr The machine has operated for almost 33,107 hours in automatic mode.

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Isdpeh Nypfjfx An Dear

Condition: good (used), Year of construction: 1995, operating hours: 44,283 h, functionality: fully functional, screw diameter: 30 mm, displacement volume: 98 cm³, injection weight: 88 g, overall weight: 5,300 kg, Angel 90 tons Incl. robot (ASS) Iaodpfjt Dxqtex An Der Production in clean room.