Used Espec Tsa-72El-A -65°C Bis +200°C for sale (95,075)

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Nodpfx Aijzhkfqorelh Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, ESPEC Temperature Shock Chamber / Liquid-to-Liquid Shock Chamber ESPEC TSB-51 Temperature Shock Chamber Temperature range: Hot bath +70 °C to +200 °C / Cold bath -65 °C to 0 °C Approximately 13,611 operating hours Air-cooled For sale is a used liquid-to-liquid temperature shock chamber from the manufacturer ESPEC CORP. The temperature shock chamber is suitable for thermal shock testing, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The system operates with a liquid-to-liquid testing process with a movable test basket between the hot and cold baths and features a programmable controller. Technical data: Manufacturer: ESPEC CORP. Type: TSB-51 Equipment type: Liquid-to-liquid temperature shock chamber Operating hours: approx. 13,611 h Temperature range, hot bath: +70 °C to +200 °C Temperature range, cold bath: -65 °C to 0 °C Bath volume: approx. 55 liters Test basket: 150 × 150 × 200 mm (W × H × D) Internal dimensions: 290 × 350 × 520 mm (W × H × D) External dimensions: 1200 × 1785 × 1320 mm (W × H × D) Weight according to nameplate: 800 kg Power connection: AC 400 V / 3-phase / 50 Hz Max. power consumption: 22 A Refrigerant 1: R404A Refrigerant quantity: 2.8 kg Refrigerant 2: R508A Refrigerant quantity: 0.89 kg Equipment: Programmable ESPEC controller with display Liquid-to-liquid temperature shock testing system Movable test basket Hot bath and cold bath Overcooling protection Overheating protection Operating hour counter RS-485 interface ESPEC OnlineConverter PN5-CN Ethernet and USB interfaces Operating manuals as shown in the pictures Application areas: Temperature shock testing Thermal cycle testing Material testing Electronics testing Component testing Automotive Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Device powers on / Controller and display are active Scope of delivery: 1x ESPEC TSB-51 temperature shock chamber ESPEC OnlineConverter PN5-CN Operating manuals as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Njdpfez Hb Tyex Airslh Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Espec Type: TSD-100 New evaporator installed in February 2026 100-liter usable volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Nlodpfx Aszizl Rsirsh Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Condition: used Weight: 1100 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2016, Viessmann Vitocrossal 200 Type:CM2 Year: 2016 Output: 311Kw Мы говорим по русски! Viewing please only by telephone arrangement! Nedpfjtu Trusx Airjlh Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller accepts no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Nlodpjv Ivnzsfx Airjh Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range -10°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection Nlodpfx Aijv Ivn Usrjh USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range -10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: good (used), Foldmaster 200 SA Automatic Folding Machine This is the latest product from the Swiss company Multigraf AG. The machine is in good working order and ready for production. Equipped with new rollers. Features 2 folding plates that are electronically adjusted via a control panel, allowing for very fast setup and high precision. Includes a pneumatic feed system and soundproofing. Comes with accessories, including: an operating manual and a creasing kit. Ideal for the pharmaceutical industry due to its small minimum fold size. Electric delivery system with infinitely variable delivery speed. Infinitely variable folding speed. Nljdpez S Uw Refx Aireh Power supply: 230V. Becker compressor. Format: 35 x 55 cm. The control unit/counter performs the following functions: • setting a specific batch size; • setting the duration of the pause between individual batches of sheets; • displaying the total quantity of processed material; • displaying the operating speed (units per hour); • programming the suction duration; • programming the pulse duration for the spacing between sheets. Paper weight range: 40–240 g/m². Throughput (A4 format): up to 30,000 sheets per hour.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Refrigerant pump station, complete with a control cabinet, pumps, and connecting fittings. The entire unit is mounted on a steel platform. Njdpozu R S Defx Airolh Available for sale as a complete set or in individual components. Pumps with a capacity of 60 m3/hour are also available separately.

Condition: good (used), Year of construction: 2014, functionality: fully functional, DMG Mori Sauer Lasertec 65 Shape Year of manufacture: 2014 Nodpfoz Ix Uqex Airelh X-axis travel: 650 mm Y-axis travel: 650 mm Z-axis travel: 560 mm Control system: Siemens 840D sl Main spindle: Speed range – main spindle: 20 – 10,000 min/-1 Drive power – main spindle: 13 / 9 kW Max. torque: 83 / 57 Nm Tool interface: HSKA63 DIN 69893 NC rotary table: Table clamping surface: 800 x 650 mm Max. table load: Swiveling range / Rotational range T-slots: 600 B: +/- 120 C: 360 Max. workpiece dimensions: 650 (840) x 500 mm Tool magazine: Number of tool positions: 30 Max. tool weight: 6 kg Max. tool diameter: 80 mm Max. tool diameter with free neighboring position: 160 mm Max. workpiece length: 315 mm Tool change time (tool to tool): 1.6 sec Chip removal time: 8.0 sec Feeds: Rapid traverse: 40 m/min Feed force: 7/13/10 kN Feed rate: 1 – 40,000 mm/min Total power consumption: 24 kVA Machine weight: approx. 11.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Documentation Coolant system Electrical handwheel Laser head: 100 watts Laser operating hours: 6177 h / 2802 h Machine operating hours: 18703 h / 4738 h

Condition: used, Martin T 65 C Automatic panel saw Heavy-duty precision panel saw 5.7" touchscreen LCD color display at eye level Motor: 5.5 kW Saw blade adjustable from 0 to 46° Cutting height up to 204 mm Saw blade diameter up to 550 mm “ProLock” quick-change system for saw blades Anodized aluminum length stop with continuous support, fine adjustment for both folding stops, scale with magnifying glass, and electronically assisted length compensation for angled cuts. Extendable cutting length: 95–3,220 mm Rip fence length: 3,000 mm Electromotive parallel fence positioning with control system integration, anodized, folding aluminum guide rail, and four-point ball bearing guide. Safety area (0–200 mm) in hold mode, display resolution 0.1 mm, repeatability ±0.05 mm. Cutting width with parallel fence: 1,100 mm Double miter fence MitreX CE version Machine is WORKS-TESTED, in very good condition, from a small business First delivery 2016 Ex works Nsdps Aba Dmsfx Airolh

Year of construction: 2017, condition: used, Roll lifter (roll manipulator) for lifting and rotating rolls. Rotates rolls from a vertical to a horizontal position for easy assembly and allows for lateral movement, enabling effortless pallet handling. Nledozzkcvopfx Aireh Lifting capacity: 100 kg Lifting height: approx. 155 cm

Condition: new, Self-centering 4-jaw chuck designed for mounting on lathes, rotary tables, and milling machines. Mounting according to DIN 55029. Hardened and ground working surfaces ensure a longer service life while maintaining accuracy and repeatability. Balanced scroll plate and chuck allow for higher rotational speeds during machining without excessive vibration. Mounts directly to the machine on a CAMLOCK-type spindle nose. Njdpfoz Sl Afox Airolh Technical data: Parameter Value Unit Lathe chuck cast iron 4-jaw 3744 BISON A 200 mm Ratio 1:4 5 mm B 78 mm E 55 mm F 104.8 mm Q 6 J 29 mm Weight 19 kg Equipment: Lathe chuck One-piece hard external jaws One-piece hard internal jaws Key

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Nlsdewc Rk Eepfx Airsh Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: used, Year of construction: 2012, operating hours: 32,200 h, The machine offered is an ENGEL VC 200/40 Tech, manufactured in 2012. The machine is currently connected to the power grid. Technical specifications: Manufacturer: ENGEL Model: victory 200/40 tech Year of manufacture: 2012 Control system: ENGEL CC 200 Operating hours: approx. 32,200 h Clamping force: 400 kN / 40 t Screw diameter: 30 mm Injection pressure: 1,451 bar Displacement: 99 cm³ Platen size: 500 × 450 mm Tool height: 200 mm Opening stroke: 400 mm Max. platen distance: 600 mm Centering: 125 mm Ejector stroke: 100 mm Nozzle thread: M28 × 1.5 Smallest tool size: 280 mm Power: 15 kW Machine weight: approx. 2,900 kg Core pull: 1 Air ejector: 2 RSP: 3-part Design: tie-bar-less Nledez Ap Imepfx Airjh ____ Wittmann W702 picker / handling device Manufacturer: Wittmann Type: W702 Year of manufacture: 2012 Serial No.: 0000171976 Article No.: 7F00000506 X-axis: 100 mm Y-axis: 550 mm Z-axis: 90° Weight: approx. 52 kg Voltage: 105–250 V Current consumption: 1.6 A According to the available Wittmann documentation, the handling device has been refurbished. After completion of the work, a functional test and test run were carried out with the result "OK". _____ Cooling unit Manufacturer: aic regloplas GmbH Model: TAE EVO 081 Year of manufacture: 2006 Serial No.: 2200 086 152 Connection: 400 V / 3 Ph / 50 Hz Rated power: 11 kW Max. current consumption: 19 A Protection class: IP54 Max. operating pressure, water circuit: 6 bar Max. water temperature: 65 °C Refrigerant: R407C Refrigerant quantity: 5.5 kg Weight: approx. 331 kg _____ Scope of supply ENGEL victory 200/40 tech injection molding machine Wittmann W702 picker / handling device aic regloplas TAE EVO 081 cooling unit Inspection is possible by appointment. Dismantling and loading are the responsibility of the buyer! The machine is located in Bremen. _____ Subject to prior sale and errors in technical specifications. The technical specifications have been compiled to the best of our knowledge, but do not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, ABB Robotics IRB6650 Foundry 200/2.75 S4C+ M2000 robot, Profibus Controller: S4C+ M2000 Number of axes: 6 Max. payload: 200 kg Max. working range: 2750 mm Year of manufacture: 2003 Scope of delivery: Robot, controller, cables, teach panel, wiring diagrams, floppy disk drive for data backup. Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Nlsdpfxoz Rk S Ij Airsh Shipping costs to foreign countries upon request – please provide the country, city, and postal code. Freight costs upon request – please provide the delivery address.

Condition: used, Weiss   Weiss ShockEvent D/210/a/V1   Type of equipment: Temperature-controlled shock testing chamber   Testing principle: Stationary test chamber with supply of warm, cold, and ambient air via flaps Nodpsz Rwk Rsfx Airelh   Test chamber volume: approx. 210 liters   Usable test chamber width / height according to installation plan: 700 / 500 mm   Installation dimensions according to installation plan (W × D × H): approx. 1,480 × 1,670 × 1,967 mm, plus space for attachments   Weight: approx. 1,350 kg   Temperature range, warm chamber: +50 to +225 °C Temperature range, test chamber, warm phase: +50 to +200 °C Temperature range, test chamber, cold phase: −65 to 0 °C Temperature range, cold chamber: −70 to 0 °C   Heating rate: 18 K/min, i.e. 18 °C Cooling rate: 2 K/min, i.e. 2 °C   Temperature deviation over time: ±0.3 to ±0.5 K in steady state Temperature homogeneity spatially: ±0.5 to ±1.5 K   Heat compensation, cold phase: max. 6,000 W at −20 °C Heat compensation, warm phase: 0 W   Maximum load, test chamber floor: 100 kg, evenly distributed   Maximum number of insert baskets: 7 pieces Maximum load per insert basket: 7.5 kg Maximum total load of insert baskets: 50 kg Distance between insert baskets: 50 mm   Operation: WEBPanel touch display with WEBSeason®   Remote control: via computer, smartphone, or tablet   Interfaces: Ethernet, USB, and digital I/O   Power connection: 3/N/PE AC 400 V ±10 %, 50 Hz; actual design according to nameplate   Other connection options according to instructions: 380 V / 50 Hz or optionally 440 V / 60 Hz Rated power: 31.9 kW Rated current: 57 A On-site protection: 63 A slow-blow fuse Protection class, control cabinet and operating unit: IP23   Cooling: water-cooled Cooling water connections: Supply and return, each 1" internal thread   Cooling water temperature: +12 to +28 °C Cooling water pressure: 2.5 to 6 bar Differential pressure, cooling water circuit: over 2 bar   Cooling water consumption under full load with 18 °C inlet and 10 K heating: 2.9 m³/h Cooling water consumption under full load with 28 °C inlet and 5 K heating: 5.8 m³/h   Maximum heat dissipation to the cooling water: 33.7 kW Maximum heat dissipation to the installation room: 1 kW   Compressed air supply: 4 to 10 bar overpressure Compressed air connection: quick-release coupling DN 7.2 Compressed air temperature: +2 to +50 °C   Condensate drain: hose connection Ø 8 mm   Sound pressure level: approx. 63 dB(A)   Permissible ambient temperature during operation: +10 to +35 °C   Permissible relative humidity at the installation location: max. 75 %   Refrigerant: R449A 3.5 kg R469A 2.5 kg   Shipping or freight transport possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Nlsdpfx Aiexbhtrerjh Shaft, pump: Tempered steel

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 1: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part No.: 48875108 Nledpfx Aioxbhtlsreh Single-stage volute casing pump with rated capacities according to EN 733, fitted with KSB IEC three-phase motor, protection class IP 55, insulation class F, assembled as a block unit. Pump shaft rigidly coupled to motor shaft. Equipped with uncooled mechanical seal, corrosion-resistant shaft sleeve, replaceable wear rings. Drive lantern made of cast iron, with contact protection in accordance with EN 294. Mounting by support foot up to motor size 112, by motor foot from motor size 132 upwards. Volute casing: Cast iron Impeller: Cast iron Shaft, pump: Tempered steel

Condition: excellent (used), Year of construction: 2011, Horizon brochure production line Horizon VAC 100 a, VAC 100m collating machine Number of stations: 2 x 10 Maximum format: 500 x 350 mm Minimum format: 148 x 120 mm Loading capacity: 55 mm per station Speed: max. 9,500 cycles/h Weight: 320 kg per tower Machine dimensions: 810 x 652 x 1,961 mm Power supply: 230 V, 10.6 A, 2.3 kW ST-40 stack discharge table with misfeed tray - Maximum format: 350 x 500 mm - Minimum format: 182 x 128 mm - Paper weight: 52 – 208 g/m² - Speed: max. 8,000 sets/h - Stack height: 360 mm Njdpfsyhzubsx Airslh - Machine dimensions: 1,353 x 652 x 1,027 mm (L x W x H) - Power connection: Schuko plug, 230 V SPF 200A saddle-stitching station Input format for 4-page sheets: min. 180 x 105 mm, max. 508 x 356 mm Finished brochure format: min. 85 x 105 mm, max. 250 x 356 mm Brochure thickness: max. 25 sheets, 100 pages Speed: up to 4,800 cycles/h Weight: 782 kg (with front cutter FC-200A) Machine dimensions: 3,450 x 810 x 1,250 mm (L x W x H) Power supply: 230 V, 5.3 A; 1.0 kW Trimmer FC 200A Available from 11/2026

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 C-axis table rotation 360° B-axis table swivel -50° / +110° Spindle nose - table distance 150mm Table clamping surface Ø650 Table load max. 300kg Table slots 5 x 18H7 x 100 mm Centering bore Ø50 H7 x 30 mm Workpiece size max. Ø 520 x 330 mm Machine accuracy VDI I DGQ 3441* Positioning accuracy +/-0.006mm* Axis resolution 0.001mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive AC motor, direct drive Drive power (100% / 25% ED) 10.0/17.0 KW Speed range, stepless 20-12000 RPM Spindle taper SK 40 DIN 69871 Torque at (100% / ED) 63.7/108.6 Nm Axis drives: Axes X, Y, Z AC motors Axes B, C AC motors Travel speeds: Rapid traverse in axes X, Y, Z 36m/min Speed max. B-axis 25 RPM Speed max. C-axis 25 RPM Acceleration X, Y, Z 6.5m/s² Coolant system: External tool cooling via external nozzles Coolant tank 280l Operating pressure, external 0.9bar Coolant system, internal tool cooling DIN69871 Form A Operating pressure, internal coolant supply 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control Heidenhain iTNC 530, full simultaneous 5-axis configuration -Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Scraper conveyor with discharge height 800 mm • Spindle cooling - radiators - plate cooling for spindle motor - Full protective enclosure with canopy Tool magazine VZG 65 5A from Indunorm: Number of tools 100 with a tool length of up to 320mm / Convertible to 125 tools, then only 200mm tool length is possible. Tool diameter max. 80mm Tool diameter max. 130mm (with free adjacent spaces) Tool change with double gripper -Linear path measuring system in axes X / Y / Z (glass scale) -Direct encoder in axes B / C -Temperature compensation - IR measuring probe - 3D Nledpfsz Diq Ujx Aireh Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double cartridge filter • Switchable filter cartridges • Filtration rating 10my Belt filter system PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: 100 kg (35 kg) Handling weight max. Pallet capacity: 6 pallet spaces up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance 180mm - Clamping force 4x12500N - Repeat accuracy 0.005mm - Axial load max. 4000kg • Zero point clamping plate 320 x 320 -Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, power chucks, and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary through-feed integrated in the table • pneumatic lines routed to the outside • Pneumatic maintenance unit • Control via M commands logical inputs/outputs prepared incl. 12 pallets 320x320 !!without tool holders and without tools!! WITHOUT clamping devices such as vises, etc. !! Machine ex works, without delivery and assembly, all information without guarantee, price plus legal value-added tax.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, overall weight: 34 kg, input frequency: 50 Hz, input current: 2 A, input voltage: 230 V, RETSCH AS 200 control – Vibrating sieve machine with analytical sieves 25–200 µm For sale is a RETSCH AS 200 control for particle size analysis and fractionation of powders and bulk solids. The system is suitable for applications in laboratories, research, and quality assurance, for example, for the analysis of metal and ceramic powders. The machine is in very good condition with normal signs of wear and tear. The total new price, including the listed accessories, was €6,180 in January 2024. The electromagnetic drive generates a three-dimensional sieving motion. The vibration amplitude, sieving duration, and interval operation can be digitally adjusted. The controlled amplitude enables reproducible sieving results; up to 99 parameter combinations can be saved. Technical specifications according to the manufacturer: - Measurement range: 20 µm to 25 mm, depending on the material and sieve set - Maximum sample quantity: 3 kg - Vibration amplitude: 0.20–3.00 mm, digitally adjustable and controlled - Sieving duration: 1–99 minutes - Suitable for dry and wet sieving, with corresponding accessories - Dimensions of base unit (W × H × D): 417 × 212 × 384 mm - Weight of base unit: approx. 35 kg Available accessories: Ten used analytical sieves according to DIN ISO, each with a diameter of 200 mm and a frame height of 25 mm. One sieve each with the following mesh sizes: 25 / 32 / 38 / 45 / 53 / 63 / 75 / 100 / 150 / 200 µm A collection tray with a diameter of 200 mm and a height of 50 mm is also included. Shipping is possible; shipping costs will be charged separately. Nljdpfsz Ixfvjx Airjh If you are interested, please contact me.

Condition: used, Espec Type: EGN28-6CWL Espec, water-cooled temperature chamber Temperature test chamber, N series Power supply: AC 400 V, 3-phase, 50/60 Hz, 38 A Temperature range: -70 to +180°C Temperature change rate: Nsdpfezg Tynsx Airslh Heating: 10 °K/min Cooling: 5.5 °K/min Internal dimensions (W x H x D) in mm: 1000 x 1000 x 800 External dimensions (W x H x D) in mm: 1205 x 1920 x 2159 Usable volume: 800 liters Refrigerant: R-404A Refrigerant: R-508A Weight: approx. 695 kg For your safety as a buyer, please note the following: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 070691, control type: CNC control, actuation type: mechanical, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, table length: 2,070 mm, table width: 1,280 mm, overall weight: 8,000 kg, power: 14 kW (19.03 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine (with Multitool) For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1998. Well maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070691 Year of manufacture: 1998 Max. punching force: 165 kN Machine weight: 8,000 kg Power supply: 220V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling, cassettes, and Multitool. For reference, the standard specifications for this model are: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. Nlsdpfx Ajz E Sa Ieiroh For technical questions or to arrange a visit, please contact us by email. We will be happy to answer any questions and provide further photos or videos of the machine in operation.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection Nsdpfx Asvz U Eroirolh USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: excellent (used), Year of construction: 2013, operating hours: 8,000 h, functionality: fully functional, overall weight: 5,000 kg, load capacity: 200 kg, arm reach: 3,000 mm, controller model: IRC5, input voltage: 400 V, input current: 32 A, type of input current: AC, ABB IRB 6650S 200/3.00 robot on ABB IRBT 6004 8 meter linear track. The robot has only 8000 working hours and it is fully functional. Robot can be seen at our facilities. If any additional options needed for the robot, like camera, we can add it. 644-2 German 840-2 Profibus Fieldbus Adapter 608-1 World Zones 611-1 Path Recovery 617-1 FlexPendant Interface 623-1 Multitasking RW Drive module 1 key ABB standard manipulator IRB 6600/6650 Axis 1 standard work range 6650S-200/3.0 No motor fan Drive System 09 4600/66x0/460/660/760 Additional drive ADU-790A in position X3 No drive in position Y3 RW Track Motion Type A Key Drive Module 1 IRBT 6004 Type A Nlsdpfoyk Aizex Airsh Standard carriage In line