Used Falling Ball Viscometer Such As Thermo Haake Type C, Thermo Fisher Scientific for sale (80,266)

Condition: used, Falling Ball Viscometer like Thermo HAAKE Type C THERMO ELECTRONIC CORPORATION Type 002-7580 Serial No.: With the Thermo falling ball viscometer, you can measure viscosity precisely without electricity, using only a stopwatch. It allows for accurate measurement of the viscosity of transparent Newtonian liquids and gases. Measuring principle: A ball moves by rolling and sliding inside an inclined cylindrical tube filled with the liquid to be tested. The time it takes for the ball to travel a defined measuring distance is recorded. By swiveling the measuring section, the return movement of the ball can also be used for measurement. The result is displayed as dynamic viscosity in mPa·s. Ijdpsxcbnrsfx Acgjtf Max. viscosity: 100,000 mPa·s Min. viscosity: 0.5 mPa·s Standards: DIN 53015, ISO 12058 Reproducibility: < 0.5% Thermometer: -1 °C to +26 °C (read-out accuracy 0.1 °C) Ball set Type 800-0182 with 6 balls (balls 1 and 2 made of borosilicate glass; balls 3, 4, 5 and 6 made of nickel-iron alloy) Recommended for: Chemical industry (polymer solutions, solvents, printing inks) Pharmaceutical industry (raw materials, glycerin) Mineral oil industry (oils, liquid hydrocarbons) - Inner glass tube (falling tube) damaged on one side at the screw socket (see images). Replacement part no. 002-6968 Dimensions of inner tube: outer diameter 20 mm; inner diameter 16 mm; wall thickness 2 mm; length 225 mm Dimensions (W x H x D): 170 x 310 x 220 mm Weight: 3.5 kg

Condition: repair required (used), Haake HAAKE RheoStress 6000 Rotational Rheometer – Thermo Scientific Product Description: For sale is a HAAKE RheoStress 6000 rotational rheometer by Thermo Scientific – a high-precision measuring instrument for rheological characterization of a wide variety of materials. Ideally suited for use in research, development, or quality control. The device is not operational, however, as the air bearing is defective. Itedpswv Nrhofx Acgof Technical Specifications: Angular resolution: 12 nrad (internal resolution) Speed range (CR mode): 10⁻⁵ / 10⁻⁷ to 1500 / 4500 rpm Speed range (CS mode): 10⁻⁷ to 1500 rpm Torque range: max. 0.20 Nm / min. 200 nNm (rotation & oscillation) Frequency range (oscillation): 10⁻⁵ to 100 Hz Normal force: 0.01 – 50 N (resolution: 0.001 N) Temperature range: –60 °C to +400 °C (with suitable thermostat) Dimensions (W × D × H): 400 × 400 × 780 mm Weight: approx. 42 kg Special Features: Very high measurement accuracy due to low mass inertia Precision lift mechanism (0.5 µm adjustment accuracy) Modular expandability (High Shear, RheoAdaptive Control) Compatible with various thermostats Scope of Delivery: HAAKE RheoStress 6000 base unit Power cable Software Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) If you have any further questions, feel free to contact us by phone.

Condition: used, This listing is for a Thermo Scientific Dionex AS-DV Autosampler. The unit is in full working condition and is ready for immediate release. Please note that ULM do not check or guarantee the provision of software Software Thermo Scientific Chromeleon 7 license key usb- Built for the lab and IT, Chromeleon CDS chromatography software enables both productivity and regulatory compliance with automated controls, data analysis, and security tools. The Thermo Scientific™ Dionex™ AS-DV Autosampler is an innovative solution for automating sample handling in routine ion chromatography applications. It’s designed to enhance productivity while maintaining cost-effectiveness, perfect for labs focused on ion and water analysis. Key Features: Automated Sample Handling: Random Access and Flexibility: Offers random access for multiple injections and filtration, allowing labs to run samples efficiently without manual intervention. High Reproducibility: Ensures consistent results thanks to precise mechanics that control dispense speed and volume. User-Friendly Control: Please note that ULM not to check the software and cannot guarantee the provision Chromeleon™ CDS Software: The powerful software simplifies programming for injection loops and concentrator columns, allowing users to easily set optimal parameters. Advanced Sample Preparation: Optional Six- or Ten-Port Valve: This feature facilitates complex sample preparation techniques, including matrix elimination and sample concentration, enhancing analytical capabilities. Performance & Compatibility: Needle and Flow Path: Constructed from all-Thermo Scientific™ PEEK™, ensuring durability and minimal contamination. Vial Compatibility: Works with 5.0 mL and 0.5 mL polymeric vials, and filter caps can be used for automatic filtration, promoting better results. Injection Volume Range: Supports injection volumes from 0.1 to 5 mL, accommodating various experimental needs. Sample Capacity: Can hold up to 50 vials of either size or a mix of vials, adding to its versatility. Specifications: Dimensions: Height: 9 in (23 cm) Width: 17.5 in (44.45 cm) Depth: 22 in (56 cm) Weight: 16 kg Speed Control: Adjustable from 0.1 to 5.0 mL/min in 0.1 mL/min increments. Voltage: Compatible with 100/240 V. Iodpfx Acjxhf Utogotf Compatibility: Works seamlessly with various ICS systems, including ICS-5000, ICS-2100, ICS-1600, ICS-1100, ICS-900, and legacy IC systems.

Condition: ready for operation (used), Thermo Heracell CO2 Incubator Brooding Cabinet Warming Cabinet No. 644 Nominal temperature: 55°C Decontamination routine: 90°C Dimensions: 450mm x 450mm x 600mm (W x D x H) / internal Dimensions: 640mm x 650mm x 1070mm (W x D x H) / external Iodpfx Acsyx E Tysgjtf You are welcome to arrange a viewing appointment. We can arrange affordable shipping for you! You will receive a proper invoice. A net invoice for foreign customers can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and take a look at our other offers as well. Company names and trademarks mentioned are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are subject to change.

Year of construction: 2017, condition: ready for operation (used), 2 units Thermo Scientific Heracell 150i CO2 incubators, No. 439 + 440 Internal dimensions: 450mm x 450mm x 600mm (W x D x H) External dimensions (per unit): 640mm x 820mm x 870mm (W x D x H) Year of manufacture: 2017 Temperature range: 3°C - 55°C Decontamination routine at 90°C. You are welcome to arrange an inspection appointment. We can organise affordable shipping for you! You will receive a proper invoice. Itodpfxjywxqvs Acgsf For international customers, a net invoice can also be issued, provided you have a valid VAT ID. Subject to prior sale. Visit our shop to view more of our listings. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may vary and errors in the description of the item may occur; such errors and deviations are reserved.

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water Itodpsymn Egofx Acgjf - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Thermo Scientific Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced-Air Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system Description – Function & Application For sale is a professional temperature control and drying system comprising: - Thermo Scientific / Heraeus Forced-Air Drying Oven UT 6200 F - Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced-air drying oven ensures uniform temperature distribution inside the chamber and is ideal for drying, heating, and temperature-controlling samples, components, or materials. Heating is provided via the external water temperature control unit (external heater), resulting in highly stable, indirect, and gentle temperature management—without local overheating and with homogeneous heat distribution. Typical areas of use: - Laboratory & research - Industry & production - Materials testing / component drying - Tempering, heating, drying at constant temperatures Robust laboratory and industrial quality—reliable and durable. Itsdpsykab Ijfx Acgjf Device 1 – Forced-Air Drying Oven: Manufacturer: Thermo Scientific / Heraeus Model: UT 6200 F Technical Data: - Max. temperature: 85°C - Operating voltage: 230 V - Frequency: 50 / 60 Hz - Power consumption: 0.6 A - Power: 0.14 kW - Protection class: IP20 Dimensions & Weight (approx.): - External dimensions: 895 × 816 × 715 mm - Inner chamber: 554 × 644 × 503 mm - Volume: approx. 180 liters - Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Model: STW 150/1-3-10-K5 Technical Data: - Heat transfer medium: water - Connection: 400 V / 3~ / PE / 50 Hz - Power consumption: 6.9 A - Heating capacity: 9 kW - Apparent power: 4.7 kVA - Max. temperature: 150°C Dimensions & Weight (approx.): - Dimensions: 30 × 75 × 60 cm - Weight: 55 kg Total: - Complete temperature control and drying system - Joint operation possible (external heating / external heater) - Total weight: approx. 155 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: used, The Thermo Scientific MaxQ 8000 incubated shaker provides precise temperature-controlled mixing for laboratory applications. Direct-from-lab surplus due to closure, ideal for consistent shaking and incubation workflows. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. - Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Itedpfeyvvl Isx Acgof Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. * Source Pedigree: Tier 1 Biotech * Condition: Direct-from-Bench - Clean (Original) Electrical: Power-On Test: Verified: System boots to home screen / fans active Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2013, condition: excellent (used), functionality: fully functional, Special Opportunity! We are offering top-maintained CO2 incubators from the world-renowned brand "Heraeus" or "Thermo Electron" model HERAcell 150i, copper version, sourced from the medical academy inventory of the German Armed Forces (Bundeswehr). The HERAcell 150i is one of the most widely used and reliable devices in its class, and is considered essential in laboratories worldwide. Features include a chamber made entirely of copper with a water reservoir integrated directly into the working space for added convenience, along with three copper shelves. The devices were procured by the Bundeswehr in 2014 but saw very little use, primarily being powered on occasionally for testing purposes only. All components, including the shelves, present in excellent technical and visual condition—please see images. Itsdpevph Enefx Acgof There are no damages or malfunctions; the unit is immediately ready for operation. However, we would like to point out for proper order that, prior to commercial use, all regular safety inspections as per STK / MTK requirements must be renewed! The greenish discolorations shown in the photos are a result of water interacting with copper during functional testing and do not impact usability in any way. Included in the scope of delivery: the incubator itself and three copper shelves. The price is per device as described and includes accessories. Technical Data: - Capacity (Imperial): 5.3 cu. ft. - Data output: RS232 - Capacity (Metric): 150 L - Chamber material: Copper - CO2 concentration range: 0 to 20% - CO2 sensor technology: TC sensor - Illumination: LED - Material: Copper - O2 concentration range: Optional 1 to 21% or 5 to 90% - Oxygen control: Optional 1 to 21% or 5 to 90% - Relative humidity: < 90% at 37°C - Type: CO2 Incubator - Application: multipurpose - Humidification source: integrated water reservoir - Interior dimensions (L x W x H): 20.9 x 18.5 x 23.9 in (53 x 47 x 60.7 cm) - Exterior dimensions (L x W x H): 30.8 x 25.1 x 34.1 in (78.2 x 63.7 x 86.7 cm) - Weight: 70 kg Ex-works pricing. Collection is possible during our regular business hours with a prior appointment. Insured freight shipping by a forwarding company is available within three working days of receipt of payment for an additional fee. Total system weight, including accessories and pallet, is approx. 100 kg. Sale is exclusively to commercial clients. You will receive a VAT invoice. Private individuals may purchase the equipment “on behalf of a customer;” direct commercial sales to private buyers are expressly excluded! Sold as-is, with warranty and liability for material defects excluded. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of duties by the seller, or for injury to life, body, or health. For questions about pricing or technical details, please do not hesitate to contact us at the address provided.

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg OSMOSIS SYSTEM Isdpsu Nw Enefx Acgjtf The system has been dismantled. We are selling the system/parts at cost price! Areas of application, e.g.: All types of contaminants are filtered out. e.g. bacteria, viruses, pesticides, nitrate, fertilizer residues, lime, salts The system was preserved in 2014. i.D. *

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg OSMOSIS PLANT Iodeu Nw Hlspfx Acgstf *

Condition: used, Thermo Scientific HERAcell 150 i CO2 incubator cabinet Isdpfstzakqox Acgetf Chamber volume [l]: 150 l External dimensions (W x H x D): 637 x 867 x 782 mm Internal dimensions (W x H x D): 470 x 607 x 530 mm Interior material: Solid copper You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, This listing is for a Thermo Scientific MaxQ 8000 Orbital shaker incubator The unit is in full working condition and is ready for immediate release. Iedpfx Ajylapnocgstf The Thermo Scientific MaxQ 8000 is an orbital shaker incubator — a piece of lab equipment that combines controlled shaking and temperature control in one unit. It’s designed for biological and biochemical workflows where maintaining both a constant temperature and agitation are important, such as: - Cell culture (bacteria, yeast, insect or mammalian cells) - Fermentation - Protein expression - Hybridization and DNA work - Solubility studies and other mixing tasks How It Works - Orbital shaking: The platform inside moves in a circular (orbital) motion to mix or agitate samples evenly. - Temperature control: It incubates samples at controlled temperatures — typically from above ambient up to ~60 °C, and in refrigerated models also below ambient — so you can grow cultures or perform temperature-sensitive reactions. - Stackability: Units can be stacked 2–3 high to multiply capacity without using more floor space. Key Features - Temperature range: Ambient +10 °C to ~60 °C (or lower if refrigerated version) - Speed range: ~25–400 rpm for shaking with accurate control - HEPA-filtered chamber: Promotes clean air and reduces cross-contamination risk inside the incubator for better culture conditions. - Slide-out platform: Makes loading and adjusting flasks easy. - Microprocessor controls: Digital display and alarms for monitoring temperature, speed, and time. - Typical Applications - Growing microbial or cell cultures - Protein expression studies - Hybridization reactions - Solubility assays - General mixing where precise temperature control is needed alongside agitation.

Year of construction: 2020, condition: like new (used), Here we offer a safety cabinet. The Herasafe 2030i series of biological safety cabinets leverages years of experience in global leadership in BSC design with breakthrough innovations to optimize contamination prevention, ease of use, and information management and delivers the most technologically advanced Class II cabinets on the market. Equipped with "smart" safety features for self-monitoring, intuitive touchscreen graphical user interface and built-in connectivity to maintain key performance to maintain critical performance data, the Herasafe 2030i delivers performance with unprecedented precision for demanding cell culture applications and other sensitive work, that require a high level of safety for product, personnel and environment. Suitable for working with BSL 1, 2 and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus and SmartClean Plus. Features intuitive touch screen interface, working height of 20 cm, electrically operated window, segmented worktop in sections of 30 cm and 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Included option, Thermo manually adjustable base 1.5 m Thermo cross-beam UV lamp included Dimensions (L x W x H) outside: 800 x 1600 x 1536 mm Dimensions (L x W x H) inside: 627 x 1500 x 780 mm 230 V 9 A 2010 W Type: Herasafe 2030i 1.5 Condition: used / as new (Changes and errors in the technical data, specifications are reserved!) Ijdpfx Aei Dn Idscgjtf Further questions we can answer on the phone for you.

Year of construction: 2023, condition: like new (used), Thermo Fisher Type: ARL easySpark metal analyzer Analysis table spectrometer with PC, monitor and software Thermo Scientific OXSAS 2.7 software OXSAS is the most modern software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of data sets using fill-down and increment-down tools OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables it to meet all your requirements. Technical machine description: Condition: fully functional In mint condition Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized plants and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods and other industries. The device impresses with its particularly high resolution thanks to a unique optical system based on multi-grating/CCD (charge-coupled device). Additional benefits of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace levels to percent, in all solid metal samples A breakthrough spark excitation and optical design to ensure best-in-class performance Intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Itedpfov Hbvbox Acgjf Compliance with safety and quality guidelines A simple design that is suitable for both novice production users and expert lab staff The instrument is ideal for other areas such as metal recycling, academic and non-academic laboratories and primary metal producers where a cost-effective solution for analyzing metal products and materials for quality assurance and process control or a secondary instrument is required. Power connection: 110-230 VAC, 50Hz or 60Hz Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Thermo Fisher ARCTIC A25 Technical data: Controller type: SC150 Capacity: 12 l Communication: RS232, RS485, Ethernet/LAN, analog I/O Cooling capacity: 500 W Flow rate: 17 l/min. Pump type: pressure pump, suction pump Temperature range: -25°C to +100°C Max. Pressure: 300 mbar Temperature stability: 0.02°C Dimensions (L x W x H) 48.3 x 27.3 x 71.1 cm Length 48.3 cm Inner length 18.4 cm Width 27.3 cm Inner width 17.3 cm Height 71.1 cm Inner depth 20.4 cm Weight: 36.1 kg Electrical requirements 230 V 50 Hz Voltage: 230 V Ijdery Ui Hepfx Acgotf Frequency: 50 Hz Condition: used Scope of delivery: (See pictures as shown) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3.000 ml/min (capillary). Flow rate accuracy: < 0.1 %. Flow rate precision: < 0.1 %. Gradient dosing accuracy and precision: ± 0.5 % at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Isdpfxjhh Ibts Acgotf Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 55 lb. (24.1 kg) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used / used Scope of delivery: (See pictures as shown) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Year of construction: 2020, condition: like new (used), Here we offer a safety cabinet. The Herasafe 2030i series of biological safety cabinets leverages years of experience in global leadership in BSC design with breakthrough innovations to optimize contamination prevention, ease of use, and information management and delivers the most technologically advanced Class II cabinets on the market. Equipped with "smart" safety features for self-monitoring, intuitive touchscreen graphical user interface and built-in connectivity to maintain key performance to maintain critical performance data, the Herasafe 2030i delivers performance with unprecedented precision for demanding cell culture applications and other sensitive work, that require a high level of safety for product, personnel and environment. Suitable for working with BSL 1, 2 and 3 pathogens, EN1822 standards, dual DC motors, DAVe Plus, SmartFlow Plus and SmartClean Plus. Features intuitive touch screen interface, working height of 20 cm, electrically operated window, segmented worktop in sections of 30 cm and 316L stainless steel interior. Certified by TÜV Nord according to EN12469. Included option, Thermo manually adjustable base 1.5 m Dimensions (L x W x H) external: 800 x 1600 x 1536 mm Dimensions (L x W x H) inside: 627 x 1500 x 780 mm Isdpfx Asi Dn H Sscgjtf 230 V 9 A 2010 W Type: Herasafe 2030i 1.5 Condition: used / as new (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: new, Thermo Scientific Attune™ Flow Cytometer Waste Bottle Unopened No Box Itodpfx Acsvwcyvogjf We have four pcs in stock, price is for one pc only.

Condition: excellent (used), Thermo Scientific CryoMed 7453 – Controlled Rate Freezer Condition: Tested, fully functional, very well maintained. Includes: Two cryo aprons and one pair of cryo gloves. Used in laboratories, clinics, and biobanks for standardized cryopreservation of cells, tissues, and biological samples. Ideal for stem cells, blood components, IVF, and sensitive cell lines—any application where reproducible freezing curves and complete documentation are essential. Isdpfx Acowpvfbogetf The Thermo Scientific™ CryoMed™ controlled-rate freezer features an integrated control system (including freezing chamber, microprocessor control, and printer—all in a compact benchtop unit) that allows you to adapt multiple freezing profiles to specific protocols. Features • Chamber: 34 litres, front-loading, 304 stainless steel • Temperature range: +50 °C to –180 °C, programmable cooling rates down to below 0.1 °C/min • Six factory-set freezing profiles + ten freely programmable profiles • Precise control: programmable cooling rates • Integrated thermal printer for complete documentation • Type-T thermocouples for real-time recording • Comprehensive alarms (thermocouple break, heater failure, temperature limits, power failure, running/completed programs) • External dimensions (W × D × H): 95.8 × 53.8 × 51.8 cm • Internal dimensions (W × D × H): 33 × 30.5 × 33 cm • Weight: 72.6 kg • Power supply: 230 V / 50 Hz, 5.5 A • LN₂ connection: 0.5″ flare hose (1.8 m), supply pressure approx. 1.5 bar Scope of Delivery • CryoMed 7453 freezer • 2x ThermoFisher Cryo-Apron Thermoshield • 1 pair ThermoFisher Cryo-Gloves • Operating manual (PDF) Inspection on site in the Basel area is possible by arrangement. We ship worldwide, please inquire. If interested or if you have questions, feel free to contact us.

Condition: used, Electronic crimpers provide secure, reproducible crimps. A single press of the button both closes the crimping jaws to attach the seal and opens them to release the vial. Decappers provide quick and easy removal with a single press of the operation button. Adjustable crimp settings allow compatiblity with standard aluminimum, pressure-release, tin-plated steel and bimetal two-piece seals† Ergonomic design reduces wrist strain Controls and indicator lights are visible and accessible for left- or right-handed operation Crimpers and decappers can be operated while plugged in and recharging Vials can be crimped or decapped while they remain in most standard removable sample trays Crimp-force sensing automatically determines when a proper seal has been formed and opens the jaws to release the vial Isdpfx Acoxzhy Sjgetf

Condition: used, This listing is for the Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette The unit is in full working condition and is ready for immediate use The Thermo Scientific™ F1-ClipTip™ 12-Channel Pipette is a high-precision manual pipette designed for efficient and reproducible liquid handling in laboratory settings. It features Thermo Fisher's innovative ClipTip™ technology, ensuring secure tip attachment and ejection without the need for forceful insertion or removal. Key Features Number of Channels: 12 Volume (Metric): 30 to 850 μL Increments: 1 μL Compatible Tips: ClipTip 1000 Color: Blue Model: Bluetooth* (see description section below for more details) Programmability: Yes Type: 96 format (designed for 96-well plate applications) Volume Range: 30 to 850 μL (with the ClipTip 1000) Isdpfxjxv Di Es Acgetf Tip Attachment: Tips lock securely in place with a light touch and remain sealed until intentionally ejected Ergonomic Design: Lightweight handle with a 120° adjustable finger rest for both right- and left-handed users Volume Adjustment: Secure volume lock to prevent drift during operation Warranty: Industry-leading lifetime warranty with convenient online registration Certifications: CE-marked in accordance with IVD Directive in Europe; manufactured according to ISO 9001, ISO 14001, and ISO 13485 standards Applications Ideal for applications requiring high precision and reproducibility, such as: Genomics and proteomics Microplate assays Cell culture and drug discovery High-throughput screening

Condition: used, This listing is for the Thermo Scientific Precision CIR19 Heated Circulating Bath The unit is in full working condition and is ready for immediate use The Precision CIR‑19 is a robust and reliable lab tool tailored for high-precision temperature-sensitive workflows. Its strengths include excellent uniformity, precise digital control, safe operation features, and ease of maintenance. Whether you're incubating samples or performing delicate assays, it’s built to deliver consistent, reproducible results Overview & Applications The Precision CIR‑19 is a high-performance 19 L (5 gal) circulating water bath engineered for applications demanding strict temperature uniformity and control—think enzyme reactions, serological assays, or any sensitive method where thermal consistency matters. Key Features Perimeter-directed water flow for superior temperature uniformity. Coil-free internal design, making cleaning and maintenance a breeze. Microprocessor-based digital control, displayed via a monochrome LCD. Auto-on/auto-off timers and audible alarms, enhancing scheduling and safety. Low-fluid (dry-run) protection, guarding against overheating or damage. Hinged lid with extended height, ideal for accommodating taller labware. Supplied with a stainless steel gable cover, diffuser tray, and the quirky but useful rubber duck. Itodpfx Acjxhfpwegef

Condition: used, This listing is for a Thermo Scientific Heat Block The unit is in full working condition and is ready for immediate release The Thermo Fisher Heat Block – Dry Bath is an advanced and versatile laboratory device designed to meet a variety of heating needs in research, clinical, or industrial applications. This digital dry heater offers precise control over temperature and time, making it ideal for experiments that require consistent and uniform heating. Key Features: Dynamic Temperature Stability: This heat block provides excellent temperature uniformity of less than ±1.0°C and temperature accuracy of less than ±0.5°C at 37°C, ensuring reliable and reproducible results. Proportional-Integral-Derivative (PID) Controller: The PID controller offers precise control over the heating process, allowing users to select specific temperatures and times. The system also enables fast heat-up for samples, optimizing workflow and reducing wait times. Wide Temperature Range: Temperatures can be set in 0.1°C increments, ranging from ambient +5°C to 130°C, making the heat block adaptable for a wide range of applications. Programmable Timing: The heat block includes a programmable timer that can be set for up to 99 hours and 59 minutes. This feature allows users to run multiple processes without needing to monitor the heating continuously. Interchangeable Blocks: The Thermo Fisher Heat Block is designed for flexibility, with interchangeable blocks that can accommodate various tube sizes, vials, and microplates. This makes it suitable for a broad range of lab applications. Isdpfx Asxv D A Eocgjtf Digital Interface: The heat block features a user-friendly digital interface, making it easy to set and adjust the temperature and time. Reliability for Multiple Applications: These dry baths are an excellent choice for labs needing a sophisticated, reliable heat block for applications like PCR, enzyme digestion, sample incubation, and more.

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Itedpfxexukkys Acgef Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability