Used Fasti 2095-20-3 for sale (78,176)

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Fjdpfx Amjxz Emve Tjgd Manual backgauge with spring fingers Weight: approx. 2300 kg

Condition: used, Year of construction: 1993, Max. bending length: 3240 mm Max. sheet thickness: 2 mm steel Fgodpfx Asyhqhtom Tsd Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bent rail and machine in top condition Weight: approx. 3000 kg

Year of construction: 2000, condition: ready for operation (used), overall weight: 2,110 kg, sheet thickness (max.): 5 mm, working length: 2,040 mm, Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details. Fgodpfszi S U Aex Am Tjd - Capacity: 2040 x 4.5 mm (at 400 N/mm² Tensile Strength)- Weight: 2110 kg- Control Unit Model: Fasti-Matik 5 R (FM 5 / FM 5 R)- Operating Voltage: 400 V (3/N/PE~)- Frequency: 50 Hz- Control Voltage: 230 V AC / 24 V DC / 24 V AC- Connected Load: 6.356 kW- Nominal Current: 15.7 A- Circuit Diagram No.: 10X0001 B- Included Equipment: Control unit operating manual, machine instruction handbook- Working Hours: estimated as very low- Saving programs to the 3.5-inch floppy drive does not work (no access). It may be possible to replace it, though or the values must be entered manually.

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Fedpfxjttc Uae Am Togd

Condition: used, axle configuration: 3 axles, first registration: 10/2005, color: other, Year of construction: 2005, Empty weight: 3.750 kg Fedpfx Ameucxu Ie Tegd Axle 1: left 12 mm right 7 mm Axle 2: left 4 mm right 6 mm Axle 3: left 10 mm right 10 mm We have the possibility to stack trailers!

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Polished bending rail Weight: approx. 1000 kg Fgodpsyyl Nksfx Am Tod

Condition: used, Max. bending length: 1020 mm Fgjdeyyl Nqepfx Am Tjd Max. sheet thickness: 3.5 mm steel Polished bending rail Weight: approx. 1000 kg

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Fodjum Ttzspfx Am Tegd Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), motorized limit stop behind foot switch Technische Daten / technical details: Fgsdpohtq N Nsfx Am Ted Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 1993, control type: NC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, overall weight: 6,000 kg, total length: 2,800 mm, total width: 3,400 mm, total height: 2,100 mm, Hydraulic swiveling bending machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of manufacture: Dec. 1993 / Jan. 1994 Fgsdpfsza D Eiox Am Tjd Technical data Manufacturer: Fasti Type: 212-20-6 Year of manufacture: Dec. 1993 / Jan. 1994 Working length: 2040 mm Sheet thickness: 6 mm Stroke: 300 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.35 x W 2.80 x H 2.10 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a button and digital display - Controlled back gauge (1000/1500 mm) with ball bearings - Sharp edge guide - Bending guide All information is subject to change without notice. The machine is particularly distinguished by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 91212035, Offer 26016 Technical data: Fedpfx Amozgu Tio Tsgd - max. working width 2040 mm - max. material thickness at 40 kg/mm² tensile strength 4 mm - bending angle adjustable electronically, preselectable 0 - 135° - automatic sequential control for a complete working process - largest opening width / stroke of the upper beam 350 mm - height adjustment: - of the upper beam 100 mm - of the lower beam 100 mm - upper beam drive 400 V / 4 kW - bending beam drive 400 V / 4 kW - accessories: - motorized bending beam adjustment - rear stop adjustable with handwheel - electric foot pedal - space requirement with rear stop: - approx. W 3200 x H 1650 x D 2100 mm - weight approx. 4500 kg

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Mechanical adjustment of the bending arm with digital display (setting of sheet thickness) Manual rear stop with spring fingers up to 1500 mm 5700 kg Fsdpfx Amjy T H N Sj Tjgd

Condition: used, machine/vehicle number: 76271002, sheet width:2040 mm plate thickness:1,2 mm total power requirement:2,5 kW weight of the machine ca.:2,0 t dimensions of the machine ca.:3,0 x 1,6 x 1,7 m Fgsdpfecxxq Esx Am Ted

Condition: used, Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Maximum projection: 500 mm Fsdpfoy R S Eaex Am Tegd Stepless speed adjustment via handwheel Right and left rotation Hydraulic delivery via foot switch Weight: approx. 550 kg Additional tool on request

Condition: used, Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual rear stop up to 500 mm Side stops and table extensions Fjdpfxjukhnnj Am Tjgd knife sharpened 1900 kg

Condition: used, Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Maximum projection: 500 mm Right and left rotation Weight: about 500 kg Fgjdjywx Hdopfx Am Tod Further sets of rollers available on request

Condition: good (used), Year of construction: 1993, machine/vehicle number: 93212004, Offer 26084 Technical Data: - Maximum working width: 2040 mm - Maximum material thickness at 40 kg/mm² tensile strength: 4 mm - Bend angle adjustment: electronically pre-selectable, 0 - 135° - Automatic sequence control for a complete work cycle - Maximum upper beam opening/clamping stroke: 350 mm - Height adjustment: - Bending beam: 100 mm - Lower beam: 100 mm - Upper beam drive: 400 V / 4 kW - Bending beam drive: 400 V / 4 kW - Bending beam adjustment - Back gauge adjustable via handwheel - Electric foot switch - Space requirement with back gauge: approx. W 3200 x H 1650 x D 2100 mm Fsdpsy Em Dgofx Am Tjgd - Weight approx.: 4500 kg

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Fedpfx Amox Ebt To Tsgd Max. upper cheek stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail in top condition Manual backgauge with spring fingers 4000 kg

Condition: used, Year of construction: 1997, sheet width 2540 mm plate thickness 3 mm distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW Fsdpfx Ajx Harmjm Tjgd dimensions 4 x 1 x 1,5 m With accessories and PLC control made by Alba.

Condition: good (used), Year of construction: 1994, machine/vehicle number: 94-417-008, Offer 24356 Technical data: - max. material thickness at 40 kg/mm² strength 3 mm - Max. projection 500 mm - Working depth 430 mm - hydr. infeed of the top roller - Roller center distance 125 mm - Working speeds infinitely variable 3 to 15 m/min - Right + left rotation - Drive 400 V 1.5 / 2.5 kW - Space requirement approx. W 630 x H 1450 x D 1200 mm - Weight approx. 550 kg - with: - E - foot switch for top roller feed - E - foot switch for right - left rotation Fedpfxst Sucno Am Tegd - Various roller sets - Stop apron

Condition: good (used), functionality: fully functional, machine/vehicle number: 02212007, control type: CNC control, working width: 2,040 mm, sheet thickness steel (max.): 6 mm, Swing bending machine in excellent condition. It is powered on and can be inspected at any time. Fedpfx Aox Eiw Tsm Tegd

Condition: excellent (used), Gear milling cutter, modular milling cutter, hob cutter, tooth form milling cutter, modular milling head, shell end mill, cylindrical milling cutter, milling cutter, hob cutter, spline shaft hob cutter, gear hob cutter, lug hob cutter, rack milling cutter -Manufacturer: Fette, hob cutter 6 pieces -Type: Mod.3 R1 EW 20° see photos -Hole: Ø 32 mm -Price/Delivery: complete -Transport dimensions: 270/175/H115 mm -Total weight: 14.5 kg Fodpfxsv D Dw Ae Am Tjgd

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: Pittler, self-opening thread cutting head -Type: Model A 3 L 1018/20 -Cutting jaws: not included -Bore: Ø 31/24 mm -Hole: Ø 40 mm -Dimensions: 130/125/H170 mm -Weight: 3.6 kg Fgjdpfxsxc T Rlj Am Tsd

Year of construction: 2003, condition: used, fuel type: electric, Control, control part, interface, driving control, driving current control -Manufacturer: Jungheinrich, drive control from picking truck type: ECE 20 -Type: AS 2412/3 -Mat no.: 50314365 / 50463845 software version 1.11 -Voltage: 24 V -Number: 1x control unit available Fodpfxsiy R U Ns Am Togd -Price per piece -Dimensions: 250/190/H120 mm -Weight: 4.2 kg/pc.

Condition: ready for operation (used), Mechanical shear FE.MAR Cutting length: 2000 mm Cutting thickness: 3 mm Motorized rear register. Fodpfjwm Er Eox Am Tjgd Steel base. Front sheet metal supports.