Used Fasti 606 - 11 - 1.0 for sale (14,206)

Condition: used, Pneumatic edge folding machine FASTI Type 606 - 11 - 1.0 Folding machine for pre-bending sheet metal edges For creating an edge fold Edge folding machine for thin sheet metal, as an alternative to a bending press Manufacturer's No. 9166002, Year of manufacture 1991 Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - pneumatic foot switch - roller adjustment via threaded clamping screws Space requirement L x W x H: 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition The edge fold is the doubling of the sheet metal in the edge area, i.e., folded over once to increase the stiffness of the sheet metal. The fold creates a rounded edge, which reduces the risk of injury from cuts on the sharp sheet metal edge. Duodpfx Amodzqblj Tow Ideal for sheet metal processing of sheet metal furniture, cladding sheets, or for the construction of ventilation and soundproofing systems.

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength Dodpfx Ajy Twfqsm Tjuw - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Optional equipment: - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: used, Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Maximum projection: 500 mm Right and left rotation Weight: about 500 kg Djdpeywx Hdsfx Am Touw Further sets of rollers available on request

Condition: used, Year of construction: 1997, sheet width 2540 mm plate thickness 3 mm distance between columns 2600 mm min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories and PLC control made by Alba. Dedpfx Asx Harmom Tjuw

Condition: new, OTT-JAKOB IS-40-B1-1.0 built-in clamp, unused in opened original packaging, 100% functional, delivery as per photos Duodpsx Et Swsfx Am Tjw

Condition: used, length / mm width / mm height / mm Duodpfxey Suztj Am Tjw weight / kg

Condition: used, functionality: fully functional, Year of construction: 1992, Hand-operated swiveling bending machine Manufacturer: FASTI, Model: 205, 1020 x 2mm Year of manufacture: 1992 Technical data Manufacturer: Fasti Model: 205 Year of manufacture: 1992 Usable length: 1020 mm Sheet thickness: 2 mm Stroke: approx. 200 mm Dimensions: approx. L 1.70 x W 0.50 x H 1.60 m Weight: 520 kg Equipment - Swiveling upper die - Stroke approx. 200 mm - Various bending rails: Goosefoot die H 130 mm, segmented Bending rail 18 mm Sharp-edged rails: 30°, 45° Djdpfjzkki Iex Am Tsuw Continuous goosefoot rail 3 different radius rails All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 6,500 kg, Hydraulic plate shear Manufacturer: Schrödergroup, Type: Powershear – 3000 x 6mm Year of manufacture: 2020 Dodpszi Ezvsfx Am Tsuw Technical data Manufacturer: Schröder Type: 530 - 30/6 Year of manufacture: 2020 Sheet width: 3040 mm Sheet thickness: 6.00 mm (400N/mm) Shear gap adjustment: 0.5 – 1.8 mm Stroke rate: 24-61 strokes/min Drive power: 12.0 kW Space requirement (L x W x H): approx. L 4.00 x 3.00 x 1.96 m Weight: approx. 6.5 t Equipment - 12" touchscreen control PSC 150 on a swiveling panel - energy-efficient drive for frequency-controlled motor and pump - automatic shear gap adjustment - Adjustable clamping pressure, pre-selectable via the control unit - motorized back gauge 10-1000 mm on ball screw spindles - pneumatic sheet metal holding device - LED cutting edge lighting - programmable start and end position of the blade beam - angle stop mounted on the left, incl. electronic length measuring system, fine adjustment and side folding stop on linear guide 1000 mm - 2 stop arms with ball rollers, movable on a linear guide - table support made of stainless steel sheets, incl. ball rollers - protection of the rear side with a light curtain - scrap and small parts chute to the front, incl. "Return to Sender" function - movable table extension mounted on a guide rail - finger guard, retractable to approx. 1500 mm, incl. electrical protection All information without guarantee. A demonstration is possible at any time in our showroom.

Year of construction: 2000, condition: ready for operation (used), overall weight: 2,110 kg, sheet thickness (max.): 5 mm, working length: 2,040 mm, Plate rolling machine manufactured in 2000. This FASTI 136-20-4.5 features a capacity of 2040 x 4.5 mm at 400 N/mm² tensile strength and weighs 2110 kg. It is equipped with a Fasti-Matik 5 R control unit and operates at 400 V. If you are looking to get high-quality plate rolling capabilities, consider the FASTI 136-20-4.5 machine we have for sale. Contact us for further details. Duodpfxszi S U Ae Am Tew - Capacity: 2040 x 4.5 mm (at 400 N/mm² Tensile Strength)- Weight: 2110 kg- Control Unit Model: Fasti-Matik 5 R (FM 5 / FM 5 R)- Operating Voltage: 400 V (3/N/PE~)- Frequency: 50 Hz- Control Voltage: 230 V AC / 24 V DC / 24 V AC- Connected Load: 6.356 kW- Nominal Current: 15.7 A- Circuit Diagram No.: 10X0001 B- Included Equipment: Control unit operating manual, machine instruction handbook- Working Hours: estimated as very low- Saving programs to the 3.5-inch floppy drive does not work (no access). It may be possible to replace it, though or the values must be entered manually.

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Dedpfozi Uq Hsx Am Tjuw Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: used, Fasti 417 Beading and Flanging Machine with motorized drive and hydraulic adjustment of the upper roll Condition: Used Technical data Type 125/3 Capacity: 3.0 mm Roller center distance: 125 mm Throat depth: 500 mm Working depth: 430 mm Drive 2 (standard): 1.5/2.5 kW Drive 3: 3.0 kW Hydraulic drive: 0.75 kW Details Without rolls Without back gauge Gear motor with pole-changing capability V06/12 m/min. Dsdpfx Amsyxdl Io Teuw

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Technical data Manufacturer: Grundfos Model: CRN5-11 A-P-A-E-HQQE Motor power: 2.2 kW Frequency: 50 Hz Rotational speed: 2899 rpm Capacity: 5.8 m³/h Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C Dsdoyubcnspfx Am Tjuw The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: new, Danfoss 111.25.171.0A P1F6F5NNNN/NNNNN SNP3NN/033LN01FA SN: 2, unused, 100% functional, scope of delivery as shown in the photos. Dedjzirptopfx Am Tsuw

Condition: new, Danfoss 111.25.171.0A P1F6F5NNNN/NNNNN SNP3NN/033LN01FA SN: 1, unused, 100% functional, scope of delivery as shown in the photos. Dodpfx Amezirpms Touw

Condition: new, Sauer Danfoss 111.25.171.0A SNP3NN/033LN01FA P1F6F5NNNN/NNNNN gear pump, unused, 100% functional, scope of delivery as shown in the photos. Dodpfszh Sb Hjx Am Touw

Condition: new, Danfoss 111.25.171.0A P1F6F5NNNN/NNNNN SNP3NN/033LN01FA, unused, 100% functional, scope of delivery as shown in the photos. Djdpfszh Sbyex Am Tjuw

Condition: good (used), Motor control, controller, converter, stepper drive, stepper motor control, frequency converter Dsdpfx Amen Nbmws Tsuw -Manufacturer: Berger Lahr, stepper motor control -Type: WPM 311.004-00 -Dimensions: 310/60/H180 mm -Weight: 1.9 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: Siemens, servo motor with brake -Type 1FK6060-6AF71-1EB0 -Speed: 3000 rpm / max: 5300 rpm -Voltage: 276 V -Shaft: Ø 24 x 50 mm -Protection class: IP64 -Brake: 15.6W Dujdpfx Aoxbdm Ijm Tsw -Number: 2 servo motors available -Price: per piece -Dimensions: 290/127/H170 mm -Weight: 10 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepping motor -Manufacturer: Siemens, servo motor with brake -Type 1FK6063-6AF71-1EB0 -Speed: 3000 rpm / max: 5300 rpm Dedsxbdp Nepfx Am Tsuw -Voltage: 276 V -Shaft: Ø 24 x 50 mm -Protection class: IP64 -Brake: 15.6W -Number: 4 servo motors available -Price: per piece -Dimensions: 340/127/H170 mm -Weight: 14 kg

Condition: good (used), Punching machine, punching device, hole punching machine, multi-head punch, multi-head punch, punching system -Quantity: 5x punches -Max. width: 1000 mm Dusdpfx Amjb A I Ibo Tjw -Tool built-in: 8x45 mm -Distance between punches: 187 mm -powered: electric -Weight: 280 kg

Condition: good (used), Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller Duedpfsvby Thsx Am Tsw -Manufacturer: Nord, NORDAC Vector frequency converter -Type: SK 11.000/3 VT AT -Power: 16.8 kVA -Input: 3ph 380/460 V 50/60 Hz -Output: 3ph 0- Input V 0-1000 Hz -Dimensions: 190/165/H420 mm -Weight: 8.8 kg

Year of construction: 1987, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 330/125/H50 mm -Weight: 0.9 kg Dsdpjiidrxjfx Am Teuw

Year of construction: 1994, condition: used, Control unit, control panel, control panel, control unit, keyboard, screen, controller, hand terminal, control unit -Manufacturer: Bierrebi LEA SRL. Control module from automatic cutting machine Bierrebi TA 103 -Circuit board: LEA SRL. Type LEA 1011 2.028.01.067.01 -Dimensions: 360/130/H60 mm -Weight: 1,3 kg Dodpfx Ameiidruo Tsuw

Condition: good (used), electric clutch, electromagnetic clutch for guillotine shear, sheet metal shear, sheet metal guillotine shear, crank guillotine shear, eccentric press -for: Crank-operated guillotine shears -Equipment: Coupling, transformer, control unit Dusdpfx Amjb A I Uis Tew -Manufacturer: LABOD electronic -Type: GN 6 DZ.4Q.80 -Total net weight: 160 kg

Condition: good (used), Machine spindle, precision spindle, double grinder spindle, precision spindle for belt drive, belt drive spindle, grinding spindle -Manufacturer: Fortuna, grinding spindle precision spindle -Type: 60 64 110 Dodpfowv I T Rjx Am Touw -Dimensions: see photos -Total dimensions: Ø 60 x 455 mm -Weight: 6.7 kg