Used Festo #5482 Plate Roll Leveler for sale (21,698)

Condition: good (used), Manufacturer: Festo Rsdpfx Agshwta Ejuscb Machine Type: RSTC-U W40/7/500GL Overall size: 1600 x 900 x 1800 mm Plate width: 500 mm Number of castors: 6 Voltage: 380 V

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min Rsdpfjy Aubuex Aguocb power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. Rcodpey Ugtajfx Aguob High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 2900 € 1270 mm 1.2 mm 68 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH Rcjdpfx Aoynndrsgujb

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € 1050 mm 3 mm 2 mm 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device Rcodpfswirv Nox Agueb user manual in GERMAN

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm Rcedpfx Agou Icdyousb *

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm Rcedsyh D Nnjpfx Agueb plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine xH: 5,3 x 2,4 x 2,0 m

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Rcsdpfx Aeihvtgoguob

Condition: new, The KRM ST 20/6, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, including steel and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and an asymmetrical roll arrangement, the KRM ST 20/6 can handle even the heaviest plates with precision. The crowned and hardened rollers are suitable for processing stainless steel, while the machine boasts a motorized drive powered by a 4 kW electric motor. Control is simplified with a foot switch, and the emergency stop safety rope ensures safe operation. You can trust the central lubrication system for reliable maintenance and operation. For those looking for quality Plate Rolling Machines, the KRM ST 20/6 stands out as a solid investment. Request a quote today to enhance your sheet metal processing capabilities with this exceptional 3-Roll Motor Plate Roller. Rcjdpfxoqagtio Agusb

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll Rodpfexw D Udjx Agujcb - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty operations. It is especially used for bending materials up to 10 mm thick. Applications include bending of aluminum sheets, the manufacture of ventilation ducts, advertising panels, machine bodyworks and sheet metal components, and many other similar tasks. All models are equipped with planetary gearbox drive High-strength shafts manufactured from SAE 1050 (CK 45) certified steel Welded steel main frames Manually openable top roll Mobile control panel Conical bending roller Centralized lubrication system Precise bending feature via braked motor and planetary gearbox Powered rear roll with up/down movement Top roll support system In compliance with EU Safety Directives (CE Certificate) User manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Rjdpfx Ajx D Dfvjguocb Extended shaft ends for mounting profile and pipe bending rolls Profile and pipe bending roll set Motorized lower roll with up/down movement Derlin ringed top roll for Alucobond bending Adjustable speed steps NC Control TECHNICAL SPECIFICATIONS Bending length: 2550 MM Pre-bending: 4/5 MM Bending: 5/6 MM Top & bottom roll diameter: 190 MM Min. bending diameter: 285 MM Main motor power: 4 kW Rear motor power: 1.5 kW Length: 4700 MM Width: 950 MM Height: 1300 MM Weight: 3400 KG

Condition: good (used), functionality: fully functional, Year of construction: 1991, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 240 mm, roller (top) diameter: 260 mm, roller diameter: 260 mm, roller length: 3,050 mm, working width: 3,000 mm, working height: 900 mm, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, sheet thickness stainless steel (max.): 10 mm, overall weight: 8,000 kg, total length: 5,000 mm, total width: 1,500 mm, total height: 1,600 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, MCB3028 4 roll hydraulic plate bending machine capacity 3000x13 mm Make Davi Italy - year 1991 Plate width 3000 mm Plate thickness 13 mm Prebending 10 mm top roll size 280 mm pinch roll 260 mm Electric power Hp 10 380/50 Vac Configuration installed: -Hardened rolls -Conical hydraulic attachment -Digital position readouts infinitely variable speed control via hydraulic proportional joysticks Rsdpfx Agsy T Exfouscb hydraulic motor driven roller rotation with axial gearbox each roll central independent front open hydraulic drop-end to unload closed shells machine operating console centralized fully hydraulic -Extended rolls front shafts -one plus station hydraulic to connect a support ---- Cleaned, controlled repainted , tested Machine in optimal working conditions ready for use. CE quality certification made in Italy . Manuals and schematics original documents with the machine.

Condition: excellent (used), Year of construction: 2014, sheet width 2050 mm plate thickness 6.0 mm ST pre-bending 5.0 mm ST diameter of upper rolls 170 mm side roll diameter 165 mm diameter of lower rolls 135 mm Control SIEMENS oil volume 80.0 Liter voltage 380 V total power requirement 7,5 kW weight 3450 kg Dimensions (only the machine) 3750 x 1170 x 1000 mm very good condition (!!) current new price incl. accessories approx. 70.000 Euro special price on request The FACCIN 4HEL model series is regarded in the industry as one of the most most precise, reliable and productive electronic 4-roll round bending 4-roll round bending machines worldwide. It has been specially designed for high throughput rates and maximum accuracy for medium to heavy sheet thicknesses. Features: - robust electro-hydraulic 4-roll round bending machine * with linear guidance of the rolls * the side rollers move on a straight, diagonal axis . up and down * extremely short distances between the rollers, . which increases the bending quality - 4-roll concept offers a wide range of bending and rounding options - Freely movable control unit * SIEMENS numerical control with touchscreen Redpsy Uy R Sefx Agujcb * Control of all rollers and machine axes * Digital position display of the side rollers * Manual operation possible via electric buttons - Infinitely variable adjustment of the bending speed - top roller and bottom roller with hydraulic motors and planetary gears * active rotary movement = side rollers run freely with - Conical rolling possible by tilting the rollers * Reduction of the maximum material thickness by approx. 50-60 % . during conical bending - Electronic roller parallelism (EPS) - Bending on both sides - diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, stable machine concept - Sturdy welded steel construction - electro-hydraulic hinged bearing for easy pipe removal - pressure gauge / pressure display for the rollers - safety device (safety line with switch unit) - Manual central lubrication - operating instructions incl. circuit diagram CE explanation

Condition: ready for operation (used), functionality: fully functional, Sheet straightening machine, 2100 mm,Sheet Metal Straightening, Plate Leveler Machine 2100 mm Used machine Maximum Sheet Width: 2100 mm (2100x8 mm) Maximum Sheet Thickness: 10 mm (1500x10 mm) Number of Rolls: 11 pcs Roll Diameter: 95 mm Electric Motor: Adjustable speed and direction Electrical Data: 400 V, 50 Hz, 36 A, 22.5 kW Includes a roller conveyor. Rcsdpfx Agev Tpv Nsusb

Condition: used, functionality: fully functional, Year of construction: 1971, For sale: this four-roll plate rolling machine, type VRM HY 3000/18. The machine is connected and can be tested. Weight: 24,000 kg. Redpfexwqdrsx Agujcb

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Redpsx Sr Dfsfx Aguocb Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Rcedpfxoy Tbf Ij Agusb Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Optional equipment: Rcedjy Twfqspfx Aguob - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 28450 € 543.4 € 1550 mm 7 mm 7 mm 4.5 mm 4.5 mm 3.5 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Rcedpfsyb Szhjx Agujb Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, sheet width 1600 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 140 mm lower roll diameter 140 mm side roll diameter 120 mm min. bending diameter Oberwalzen-Ø x 3 total power requirement 3 kW weight of the machine ca. 2.000 kg Overall size 3700x1300x1280 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. Rcjdeyv N E Uspfx Agueb When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 2100 mm plate thickness 40 mm pre-bending 30 mm upper roll diameter 390 mm lower roll diameter 360 mm side roll diameter 300 mm total power requirement 22 kW Rcsdpjyv Nt Eofx Agujb machine weight ab. 17200 kg Overall size 5060 x 2200 x 2180 mm

Condition: new, sheet width 3100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 300 mm lower roll diameter 270 mm side roll diameter 210 mm total power requirement 11 kW Overall size 5600 x 1800 x 1500 mm weight of the machine ca. 8.800 kg Accessories / equipment: - Conical bending device - induction hardened rolls Rcedpfx Aeyv Nh Negujb - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 3100 mm plate thickness 10 mm Rcodpfjyv Nhcsx Agusb pre-bending 8 mm upper roll diameter 270 mm lower roll diameter 250 mm side roll diameter 210 mm total power requirement 11 kW weight of the machine ca. 7750 kg Overall size 5600x1450x1600 mm

Condition: new, sheet width 2100 mm plate thickness 6 mm pre-bending 4 mm upper roll diameter 160 mm lower roll diameter 140 mm Rsdpfx Aeyv Nf Uoguecb side roll diameter 120 mm total power requirement 2,2 kW Overall size 4140x1040x1140 mm weight of the machine ca. 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration

Condition: new, sheet width 2100 mm plate thickness 13 mm pre-bending 10 mm upper roll diameter 230 mm Rcjdpfxoyv I Ubo Agusb lower roll diameter 210 mm side roll diameter 190 mm total power requirement 7,5 kW weight of the machine ca. 4.750 kg dimensions of the machine ca. 4150x1400x1300 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration