Used Fliegl Containerchassis Für 2 Wechselbrücken 15 M Extr... for sale (1,08,839)

Condition: used, Year of construction: 2020, FLIEGL SDS350 15 Meter X-TRA LONG STRAIGHT Container Chassis for 2 Swap Bodies or 2 Containers !EXTRA LONG! !! 14.85 m long!! • Mountings for 2 x 7.45 m swap bodies • or 2 x 20-foot containers • Straight chassis Pedpowtbvtefx Alropt • 3 x SAF air-suspended 8-ton axles • Lift/lower system • ABS • ASR Vehicle dimensions and weights: • Gross weight: 35,000 kg • Unladen weight: 4,100 kg • Dimensions: 14,850 x 2,550 x 1,200 mm • Tyres: 385/55 R22.5 • Tread depth: 13/13/11/12/12/9 mm - Very good condition, hardly used! - Technical Inspection (TÜV / HU / SP): NEW! - SP: 01/26 - German semi-trailer! - 1st owner Errors and prior sale reserved! = More information = Year of manufacture: 2020 Please contact Joannis Arpantzanis or Kai Bühler for further information.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, The images shown are archive photos. Further Information Chassis Center Axle Trailer Fine-grain steel welded construction Outer frame slightly slanted with Load-Lock profile for lashing strap attachment. Note: To attach the straps in combination with side walls, the side walls must be opened! Gear support leg at the front Folding rear support 2 wheel chocks with holders Steel underrun protection, galvanized Quarter shell mudguards 1 plastic toolbox with shelf, dimensions: w=620/h=360/d=440 mm, lockable with a padlock (padlock not included) 1 open storage compartment for insert stakes, located under the loading area 4 pairs of stake pockets integrated into the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centered in the floor with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of insertable stakes, B=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stake pockets/insert stakes are not designed for securing long loads, pipes, etc. by themselves without additional lashing Tandem trailer coupling Drawbar with certified 40 mm towing eye Drawbar mechanically adjustable in length 4 x 500 mm, from 1800 to 3800 mm, set to 1800 mm (Note: Observe load distribution and drawbar load) Axles & Suspension GFA axles with tapered roller bearings and S-cam brakes Laser-measured axles/running gear to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tires 235/75 R 17.5 Manufacturer’s choice Steel rims, factory silver Brake System 2-line air brake system Spring-loaded parking brake Integral air tanks 2 non-interchangeable trailer couplings at the front with connecting lines to the truck Ppodpfxoi Ri H Do Alrst ABS and ALB, with ABS plug at the front with connecting cable Caution: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable Floor About 30 mm thick phenolic plywood, designed for high point loads Note: Warping of the floor possible due to weather conditions! Platform length approx. 6,200 mm Operating Notes The specified gross weight is technically feasible; depending on the type of cargo, the gross weight may not be achievable in compliance with permissible axle, support, and saddle loads. Approval / Plates Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame color: DB 7350 Nova Grey Attention: Archive photos!

Condition: new, machine/vehicle number: 3c70e9a5d82cfb3ada79baf95, empty load weight: 8 kg, maximum load weight: 17 kg, overall weight: 26 kg, axle configuration: 2 axles, tire size: 205 / 65 r 17,5, Further information Chassis semitrailer forwarding Welded fine-grained steel construction, fifth wheel plate with replaceable 2 kingpins, rear bevel to approx. 1920 mm, suspension bar for ramps at the rear and front on gooseneck, grinding rollers at the rear, drop center after cranking up to the axle unit. Drawing approval required from customer in case of order! Pair of lashing lugs at the top and side of the outer frame, 10 tons each Pair of lashing eyes embedded in the outer frame on gooseneck, 5 tons each Ppsdpfoi Ri Hrjx Alret 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Folding rear support, mounted on the outside Wheel chocks with holder Aluminum side collision protection Steel underride guard for EG, if technically possible Quarter-shell mudguards with anti-spray flaps according to EG 1 pair of wheel recesses after gooseneck recessed in the low bed of the tramline area, sloping towards the entrance. Length at bottom approx. 1840 mm, depth of wheel recesses approx. 200 mm. 2nd pair of wheel recesses on rear slope. Depth approx. 200 mm. Note! Frame in main beam area 200 mm higher than wheel recess. In the event of an order, a precise technical inspection is still required. Wheel recess cover can be pulled out from the drop deck with hardwood inserts, on rear slope with hardwood inserts. Electric cable winch, 24 volt, pulling force 5500 kg, mounted in the offset gooseneck, not reaching into the loading area, operation with radio remote control, operation with radio remote control, cable length 35 m x approx. 10 mm, with roller cable window and removable guide roller on rear slope. Axles + suspension SAF or BPW drum brake axles of our choice Air suspension with lift & lower valve + auto-reset function Wheels and tires 205 / 65 R 17.5 tires with 129/127K (132/132G) marking for 8 to tire load capacity at max. 90 km/h at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 interchangeable clutch heads at the front, without connecting cable EBS make Haldex, electronic brake system with EBS socket at the front, without connecting cable (sent to the customer for approval brake calculation.15.07.2021) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load detection via EBS-Canbus signal, for display via display in the cab, truck must be prepared accordingly, no truck instal. (no calibrated scales) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / checker plate covering 30 mm screen-printed floor, in the drop floor between the longitudinal beams in the middleIn the tramline area covered with toothed grating in the wheel recesses with steel/checker plate covering. Access ramps Pair of aluminum ramps 3,200 mm long, load capacity per pair 12,000 kg Pair of steel ramps for entering the drop deck Pair of steel ramps for crossing on gooseneck Drop sides Approval / plates Country of approval: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) Prepared for single-line license plate holder Contour markings with reflective strips to ECE R 048, yellow at the sides and red at the rear Warning sign according to ECE -

Condition: new, machine/vehicle number: 1f4581c873ed977cb9602039b, empty load weight: 3 kg, maximum load weight: 34 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis semi-trailer container Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Container mounts: 1 x 20 foot centered (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container lock in the longer version Pedpfoi Rixksx Alrspt 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Side collision protection Aluminum underride guard Half-shell mudguards with anti-spray flaps according to EG VA drip tray with 1 1/4 inch drain pipe + 1 1/4 inch stopcock, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between drip tray and side member 4 hose trays approx. 4500 mm long (hose box) for hose pipes 2 x DN 200 outside + 2 x DN 160 centrally arranged, rear hose box (stainless steel) 300 mm deep, splash-proof, cover (stainless steel) with rubber seal all round, with drain hole at lowest point, then without cover on hose pipes 1 stainless steel earthing lug at the rear in FR on the right of the frame, with international earthing sticker on the frame, Steps at the rear right on the underride guard, at the rear in FR right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide, Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/65 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of approval / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Approval according to ADR acc. to 9.1.1.2 of ADR, EX/II, EX/III / certificate of approval for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign at the rear, not valid for substances according to UN 0331 and 0332 (explosives B-E) Contour marking with refle

Condition: ready for operation (used), Stator for Indramat MAC 071A-0-ES-2-C / 095-A-0 permanent magnet synchronous motor, serial number: 15467, used, in good condition, 100% functional, scope of delivery as shown in the photos. Psdpoy T Dm Ujfx Alrspt

Condition: ready for operation (used), Lammers 13AA 100L-2 Motor SN: GL15043/224414-002-080 with 4602 15PA037247-19 adapter plate for fan - Ø = 420mm, used, good condition, 100% functional, scope of delivery as per photos Podpfx Astlhy Nelrjpt

Condition: ready for operation (used), Galil DMC 1540-72 servo controller for 2-axis control, SN: KK-3092, used, in good condition, 100% functional, scope of delivery as per photos. Ppsdpfox Erphox Alrst

Condition: new, Electrostatic air filter for air-handling systems - central exhaust ELBARON - RON 15 S oGk – 15.000 m³/h – 230 V – without fan Max. Air flow rate: 15,000 m³/h Total power consumption*: 3 x 0.02 kW Operating voltage*: 230 V, 50/60 Hz, 1PH + N + PE Dimensions L/W/H in mm: L 701 / W 1020 / H 1945 Colour: RAL 7035* Weight: 445 kg Manufacturer: ISI Industrieprodukte GmbH *Special voltage or special colour on request The application: The ELBARON duct air filter series were designed for central air filtration in production halls as well as for plant and building technology. Your advantages: - 15 unit variants available - Direct from the manufacturer - High filtration efficiency - Modularly expandable - Easy maintenance - Low follow-up costs due to reusable filter media - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Also available as mirror-image version - Robust construction - Quality Made in Germany Based on our filter technology, which has been tried and tested for years, this filter unit can be used as a central air filter unit in ventilation ducts. ELBARON technology reliably filters aerosols, oil mist, emulsion mist and smoke from the air. This way, the air in your production hall is cleaned effortlessly. Our air filter can also be easily integrated into central systems for machine extraction. Ppjdpfx Ash Rfccslret ELBARON filter units protect downstream heat exchangers or air conditioning units from premature contamination. ELBARON filter technology is based on environmentally friendly electrostatic particle ionisation. This makes our filter units the ideal solution for large production plants due to their high separation efficiency, large capacity and easy maintenance. Take advantage of the enormous potential of ELBARON duct air filters with low maintenance costs. All our electrostatic filter cells and filter media are effortless to clean and reuse.

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Psdpfxoxmt Eqs Alropt

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-2, Our carton sealing machine, type VOGEL MH-FJ-2, is equipped with a side drive belt system. The machine automatically adjusts to the respective carton size within the specified range. Carton formats: Length 150 – ∞ mm Width 140 – 480 mm Height 120 – 480 mm Technical data: Length 1,150 mm Width 1,005 mm Weight 250 kg Operating voltage 220 V Air pressure 5 kg/cm² Pedpfxozaadzj Alrspt CE marking IMPORTANT: An air supply is required to operate the machine; this is not included in the delivery scope. Our carton sealer MH-FJ-2 is specifically designed for changing carton formats. Thanks to the pneumatic adjustment of height and width, a wide variety of carton sizes can be processed quickly and easily without manual intervention. The machine adapts immediately to different formats. Two side and two top conveyor belts transport your cartons safely through the sealer. The top flaps of the cartons must be folded down manually before they are fed into the machine. This machine is designed for adhesive tapes with a 76 mm core diameter and 50 mm width. We recommend using machine tapes with longer lengths per roll (compared to hand rolls), allowing you to work longer without having to change the tape. Both PP and PVC tapes as well as eco-friendly paper tapes can be used. The tape units can be easily removed for quick tape change. Additionally, this function can be used if you wish to seal cartons only on top (keyword: auto-bottom cartons). Of course, this machine is also CE marked. Please note that a compressed air connection on-site is required for operation! Accessories: For our VOGEL carton sealer range, we offer optional castors, infeed and outfeed tables, and roller conveyors.

Condition: used, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2019, loading space length: 7,200 mm, suspension: air, tire size: 445/45 R19,5 160J, color: other, gearing type: other, front tire size: 445/45 R19,5 160J, rear tire size: 445/45 R19,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ppjdpfx Aley T E H Nerot

Condition: used, empty load weight: 5,300 kg, maximum load weight: 12,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 52 m³, suspension: air, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Pedpfx Alsy T E H Ajrept

Condition: used, maximum load weight: 31,410 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, Year of construction: 2020, Equipment: ABS, You can find our entire vehicle stock with immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete equipment details available upon request. - 3 SAF axles - Disc brakes - 1st axle with automatic lift axle - Air suspension - 24 t, 2-speed landing gear, single side operation - Rear extension ladder - Plastic toolbox with drawer and shelf - 2-line air brake system, EBS/ABS - 385/55 R22.5 tires - Cargo Floor moving floor, approx. 10 mm floor profile - Rear wall made of aluminum hollow profiles, double-winged door - LED work lights - Frame painted in DB 7350 Novagrau - Body painted in RAL 7035 light grey Ppedpfx Alsw Tpr Usret - Rolling tarp similar to RAL 3002 carmine red

Condition: like new (used), 92 running metres of galvanised pallet racking for outdoor use Nedcon As good as new, see pictures! A top racking system of the large manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in Holland. Frame: Height 7,2 m Depth 110 cm, Strong profiles, reinforced infill, wind & snow load included. Frame & base plates are sendzimir galvanized. Beam length 2,7 m hot-dip galvanized, girder profiles 130/50mm, girder with load / compartment 4000 kg Negotiation price: on request! Offer consists of: + 36 pcs. frames pre-assembled, depth 110 cm, height 7,2 m +210 pcs. beams, length 2,7 m, 4000 kg load/shelf +420 pcs. suspension locks + 72 pcs. concrete anchors Surcharge hot-dip galvanized feet incl. prop protection € 50,- net per frame Roof construction on request! Load bearing signs documents etc. are self-evident. You will find further accessories in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Viewing possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from a wide variety of areas broom-clean business clearances company liquidations Fast- flexible - Podpjfndh Tefx Alrjpt [...]

Condition: good (used), Over 50 meters of this type in stock, OHRA cantilever rack new! Bargaining price: € 3.290,00 net You are bidding on a rack with a length of approx. 14 m, consisting of: 10 uprights with base, 2.5 m high + 5 adjustable outriggers per upright (60 cm), load capacity 300 kg/outrigger. Diagonal bracing, stiffeners and spacers are included. Frame spacing/field width 150 cm Arm length / cantilever 60 cm Load capacity 300 kg / boom Load capacity per upright per side 1,500 kg Available over 100 meters Heights of 2.5 m, 4 m or 6 m available. Other configurations on request. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from various areas Ppedpfsbvmctox Alrjt Machines from all industries Remaining stock Special items swept clean business premises Business dissolutions Purchase of remaining stock Fast - flexible - ready to go! We also clear and dispose of property for liquidators. Write to us with a few keywords and we will get back to you as soon as possible.

Condition: like new (used), 42 rm Pallet rack Galvanized for outdoor use Nedcon As good as new, see pictures! A top racking system of the large manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in Holland. Frame: Height 7,2 m Depth 110 cm, Strong profiles, reinforced infill, wind & snow load included. Frame & base plates are sendzimir galvanized. Beam length 2,7 m hot-dip galvanized girder profiles 130/50mm, girder with load / compartment 4000 kg Negotiation price: on request! Offer consists of: + 16 pcs. frames pre-assembled, depth 110 cm, height 7,2 m + 90 pcs. girders, length 2,7 m, 4000 kg load/compartment +180 pcs. suspension locks + 32 concrete anchors Surcharge for hot-dip galvanized feet incl. prop protection € 50,- net per frame Roof construction on request! Load bearing signs documents etc. are self-evident. You will find further accessories in the accessories catalogue. Goods are in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Viewing possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. Psdpfxsfndllo Alrept (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our AGB, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for and offering numerous items from a wide variety of areas broom-clean business clearances company liquidations Fast - flexible -s [...]

Condition: ready for operation (used), TFT monitor/screen for Deckel, Philips and Maho 432/10, serial number: 153197, used, in good condition, 100% functional, scope of delivery as shown in the photos. Pedoy Ntbtspfx Alrjpt

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, overall weight: 35,000 kg, axle configuration: > 3 axles, first registration: 09/2025, next inspection (TÜV): 08/2026, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, color: grey, Year of construction: 2025, These images are archive images! The vehicle may still be in use! Podpoy Rrplefx Alrept Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 08/2006, suspension: air, color: orange, Year of construction: 2006, = Additional Options and Equipment = - Retarder = Remarks = Scania R440 Highline 4x2 - Retarder + Schmitz/Fliegl livestock trailer - 2-deck - tail lift - water & ventilation system - 2x steering axle Manufacture Year: 10-12-2013 & 30-8-2006 Mileage: 654,674 km VIN: YS2R4X20002091493 & WFDFLT23561000630 Scania Euro 5 Opti Cruise automatic transmission Retarder 2-deck livestock trailer Tail lift Water system Climate system 2x steering axle = Further Information = General Information Mileage: 654,674 km Cab: sleeper cab Technical Information Engine power: 324 kW (440 HP) Gross vehicle weight: 35,000 kg Drivetrain Fuel type: Diesel Transmission Gearbox: Opti Cruise, 12-speed, automatic Axle Configuration Suspension: air suspension Rear axle 1: Max. axle load: 10,000 kg; steered Rear axle 2: Max. axle load: 10,000 kg; steered Functional Body brand: Scania Environment Emission class: Euro 5 Condition Psdpfx Aoy Dc I Ejlrspt Technical condition: good Visual condition: good

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035294, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2024, loading space length: 7,200 mm, loading space width: 2,550 mm, loading space height: 3,310 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5, color: blue, Year of construction: 2024, The images are archive photos // Multiple units available! // The vehicle is still in transit! Chassis: Semi-trailer tipper Basic lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front panel Central telescopic support, uncoupling while loaded not possible Foldable underrun protection Half-shell mudguards Tarp bar with holder Tow hook at rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned 1st axle automatic lift axle, additionally electrically controllable from the truck, including forced lowering and starting aid, no installation on truck required Braking system 2-line compressed air brake system Spring-loaded parking brake 2 mistake-proof coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Automatic tipping lowering with shut-off valve Trailer info module for displaying vehicle data such as axle loads (not a calibrated scale), mileage, and diagnostic/system messages. Axle load detection via EBS CAN bus signal Wheels and Tires 385/65 R22.5 Polished aluminum rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white LED position lights at front 2 white/red lane control lights at rear 2x 7-pin and 1x 15-pin mistake-proof sockets at the front Hydraulics High-pressure cylinder max. 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, without hose connection Body Ppodpfeyu Rllox Alret Steel round body in "Stone Master Design" made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder mounts Interior with ladder on front wall Shovel and broom holder outside on the front wall Tailgate as a pendulum flap, externally mounted with double hook locking. 2 tension screws with toggle latches on the bottom sides. Spacer for pendulum tailgate, can be hooked into tension screws Side walls 4 mm throughout, floor 4/5 mm thick, wear- and weight-optimized construction Fliegl S.T.E.P. – pivoting front catwalk with retractable access ladder on the left side for lateral access, only in combination with "Flip Top sliding cover" Body in insulated version, Fliegl Asphalt Profi Thermo, insulated at front, sides, bottom, and rear with Fliegl Isotherm panel cover, "Flip Top sliding cover," automatic rear lock with folding bows. Cover deploys forward. Electrically operated cover, with 7-pin socket (charging socket at front without connecting cable, including loose tractor socket, no installation on truck, control on trailer and via radio remote control) 7-pin connecting cable to truck as spiral cable for sliding cover, socket must be available on the truck Operation Notes For transports of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent corrosion from aggressive materials. The stated gross weight is technically possible; depending on cargo, the gross weight may not be reached due to legal axle/support/fifth wheel load limits. Note: Not suitable for chemically aggressive media (e.g. acids, chlorine compounds, sulfur compounds, substitute fuels). Vehicles with loading bodies are intended for non-chemically aggressive loads. Paint finish Frame: DB 7350 Novagrau Support legs: galvanized Body: RAL 5002 ultramarine blue Roll tarp: RAL 5002 ultramarine blue

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902035293, empty load weight: 5,663 kg, maximum load weight: 29,337 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 04/2024, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,310 mm, suspension: air, tire size: 385/65 R22.5", color: blue, trailer brake: trailer braked, Year of construction: 2024, The images are archive photos // Multiple units available! // The vehicle is still incoming! Chassis Semi-tipper chassis Basic lightweight construction, fifth wheel plate with exchangeable 2" kingpin Patented “Curved” front wall Central telescopic landing leg, uncoupling under load not possible; when uncoupled, the vehicle must be inclined towards the rear Psdpfx Aljyux H Deropt 2 wheel chocks with holders Foldable underrun protection Underrun protection with spring assistance for easier use 6 half-shell mudguards Integrated mudguard bracket, stone-repellent surface Splash guards behind the last axle, asphalt version, mounted on mudguard with hinge, top hook-in feature for shortened mudguard Tarpaulin rod with bracket 2 towing hooks at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment for reduced tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, additionally electrically operated from truck, including forced lowering and starting aid, no truck installation required Hot-dip galvanized lift axle mechanism, 10-year corrosion warranty Braking System 2-line compressed air brake system Color-coded line routing for easier servicing Spring-loaded parking brake 2 mix-up-proof coupling heads at front, no connecting line 24V EBS, electronic braking system with EBS socket at front, no connection cable With raise/lower valve Vehicle stability control system Driver’s brake, electrically operated from truck, no truck installation required Automatic tipping lower with shut-off valve Trailer Info Module for displaying vehicle data Axle load detection via EBS CAN-bus signal Wheels and Tires 385/65 R22.5”, brand per manufacturer’s choice Polished aluminum rims Protective caps for wheel bolts Electrics 24V, multi-chamber lights, yellow LED side marker lights 2 white LED position lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin error-proof sockets at front, no connection cable LED work lights at both sides Additional integrated LED work lights at rear Hydraulics High-pressure cylinder rated up to 250 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm Operated hydraulically via truck PTO Body Steel round body in "Stone Master Design" made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic cylinder mounting. Interior ladder at front wall Shovel and broom holder external at front wall "Membrane" tailgate Tailgate as pendulum flap, mounted externally with dual hook locking. Two clamping screws with toggle closures at lower sides. Pendulum tailgate spacers—can be hooked into the clamping screws Central grain chute Fliegl S.T.E.P. – foldable front standing platform with folding access ladder, for left-side access Body in insulated version, Fliegl Asphalt Profi Thermo, sheet metal cladding "Flip Top sliding cover", automatic rear lock as folding bow. Cover is extended towards the front. Electric drive cover, with 7-pin socket (charging socket) at the front with no connecting cable, including loose tractor socket, operation on trailer and via remote control. 7-pin spiral connection cable to truck for sliding cover, truck must be equipped with a suitable socket.

Condition: used, Year of construction: 2013, functionality: fully functional, HTZ 1200 SP EXTREME 15 HORIZONTAL LOG BAND SAW for big logs • production year 2013 • max. log diameter: 1,5 m • 45 kW main motor with frequency converter • automatic, hydraulic blade tensioning Pjdpfsx Adlgsx Alropt • automatic pre-cutter • automatic board guiding device • max. length of logs 12 m • 8 pcs hydraulic clamp + 1 pc support • 1 pc lifting clamp for taper control • 3 pcs log turning device with left-right positioning • set of longitudinal rollers (3 pcs motorised, 1 pc simple) • automatic control • automatic, lifting belt conveyor for boards • dust extraction device • low working hours

Condition: new, machine/vehicle number: 7383bc2b7f580f0cb319b52f7, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, Further information Chassis: Semi-Trailer Tipper Fine-grained steel welded construction, lightweight design, fifth wheel plate with replaceable 2" kingpin Curved front end, patented Telescopic support centrally mounted, uncoupling when loaded not possible; when uncoupled, the vehicle must be positioned tilted toward the rear. Wheel chocks with holder Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface Splash guards behind the last axle, asphalt version, hinged to the mudguard, with hanging option at top of mudguard, mudguard shortened Tow hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Axles in off-road version Air suspension 1st axle: automatic lift axle, including forced lowering and traction assistance Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty Brake System 2-line compressed air brake system, color-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Attention: The trailer may only be towed by tractors that ensure effective ABS function! With lift & lower valve Vehicle driving stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System compliant with ECE R 141, display via tractor head unit through EBS, not installed in truck (must be prepped in truck, only for basic tire set) Electrics 24 volt system, multi-chamber lights, yellow LED side lighting Yellow LED side lights linked to indicator – "flashing side marker lights" 2 white position lights at front 2 white/red lane marking lights at rear 2 x 7-pin fail-safe sockets at front, without connection cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operated hydraulically via truck PTO Body Steel round body in Stone Master design made from highly wear-resistant HB 400/450 steel. Slanted front wall with external hydraulic components and access steps at the front wall. Membrane rear wall Rear wall as pendulum flap, externally mounted with double hook lock. 2 clamping bolts with T-locks on the lower sides. Side walls throughout 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized design Body insulated design, Fliegl Asphalt Profi Thermo, insulated at front, side, bottom and rear with Fliegl Isotherm. Cover: BASIC, tarpaulin side cover Standing platform with access, connection plate for air/electric and brake with large space for optimal operation. Pjdji Rix Iopfx Alrept Side roll tarp, stowed to the right side, central locking on left Approval/Country/License Plates Germany Type approval per EG 2007/46 Body strength per EN 12642 24/7 service hotline Manufacturer certificate for thermal vehicles as per RS 10 - 2013 Prepared for single-line license plate holder Warning panel per ECE 70 Paintwork Frame: DB 7350 novagrau (new gray) "10-year anti-corrosion warranty" Support legs: galvanized Body/Side tarp: RAL color as desired, single-color Roll tarp: RAL 7035 light gray Thermal insulation also available in BASICplus (sheet metal cover) and Premium (stainless steel cover)!

Condition: new, machine/vehicle number: 7d479432c7290a73a46ff6365, empty load weight: 5,000 kg, maximum load weight: 34,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, Further Information Chassis: Semi-trailer Tipper Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2" kingpin Patent-protected curved front end Central telescopic landing leg, uncoupling while loaded not possible, when uncoupled vehicle must be parked at a backward angle Wheel chocks with holders Foldable underrun protection Half-shell fenders Ppodpfxei Ri Dpo Alrjt Integrated fender bracket with stone-repellent surface Tarp rod with bracket Tow hook at rear Axles & Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis for reduced tire wear and lower fuel consumption Axles in off-road version Air suspension 1st axle is a lift axle with automatic lowering function and traction aid Hot-dip galvanized lift axle mechanism – 10 years warranty against rust-through Braking System 2-line compressed air brake system, color-coded line routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, no connecting cable included Note: The trailer may only be towed by tractor units that ensure ABS function! With lift & lower valve Vehicle stability system Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System per ECE R 141, display via tractor unit and EBS, without truck installation (prerequisite must be met in the truck, applies to standard tires only) Electrics 24 Volt, multi-chamber lights, side-mounted yellow LED lighting Side yellow LED lighting linked with indicators (“flashing side marker lights”) 2 x 7-pin swap-proof sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (no hose connection) Operated hydraulically via truck PTO Body Steel round trough in Stone Master design made from highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic system and ladder on the front wall Greenline – conical and aerodynamic trough design Shovel and broom holder outside on the front wall Membrane tailgate Tailgate as swing door with double hinge, external mounting with double hook locking. 2 clamp screws with toggle fasteners at lower sides Side walls continuous 4 mm thick, floor 4/5 mm thick, wear- and weight-optimized structure Standing platform with ladder, connection plate for air/electrics and brakes with generous space for easy operation Roll tarp, stows to the right (FR-right), with central locking on FR-left Country of Registration/Plates Germany Homologation according to EC 2007/46 Superstructure strength according to EN 12642 24/7-Service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Chassis: DB 7350 Nova Grey "10-year warranty against rust-through" Support legs: galvanized Trough: RAL of choice, single-color Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: 74dd481d88dffaf9218e6ee58, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-trailer Tipper Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with replaceable 2" kingpin. Curved front end, patented. Central telescopic support leg; unhitching with load is not possible, and when unhitched, the vehicle must be parked on a rearward slope. Wheel chocks with holder. Folding underrun protection. Half-shell mudguards. Integrated mudguard holder with stone-repellent surface. Tarp pole with holder. Tow hook at the rear. Axles & Suspension SAF disc brake axles with 430 mm disc diameter. Axle/chassis laser alignment reduces tire wear and fuel consumption. Axles in off-road configuration. Air suspension. 1st axle lift axle, automatic, including forced lowering and starting aid. Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through. Brake system 2-line compressed air brake system, color-coded line routing for easy service. Spring-loaded parking brake. 2 fool-proof coupling heads at the front, without connecting line. EBS (Electronic Braking System) with EBS socket at the front, without connection cable. Note: The trailer may only be towed by vehicles that guarantee the effectiveness of the ABS! With lift & lower valve. Vehicle stability control system. Wheels and tires 385/65 R22.5. Steel rims, factory silver. Podpfx Asi Ri A Ielrspt TPMS (Tire Pressure Monitoring System) according to ECE R 141, display via truck dashboard over EBS system, not installed in the trailer (prerequisite: must be available in the truck; applies to basic tires only). Electrics 24 Volt, multi-chamber tail lights, lateral yellow LED lighting. Side yellow LED lights linked to turn signal (“flashing side marker lights”). 2 white front position lamps. 2 white/red lane control lights rear. 2 x 7-pole fool-proof sockets at the front, without connection cable. Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw coupling, fixed section, NW 48 mm (without hose connection). Operated hydraulically via truck PTO. Bodies Steel round tipping body in Stone Master design made from highly wear-resistant HB 400/450 steel. Sloped front wall with external hydraulic system and ladder at the front wall. Greenline – conical and aerodynamic body shape. Shovel and broom holder externally on front wall. Membrane Rear Wall Rear wall as pendulum flap with double-joint hinge, externally mounted with dual hook lock. 2 clamping screws with wing nut locks at lower sides. Side walls are 4 mm thick throughout, floor 4/5 mm thick; wear- and weight-optimized design. Standing platform with ladder, connection plate for air/electrics and brake with ample space for optimum operation. Roll tarp with stowage to passenger side (FR-right), with central locking on driver’s side (FR-left). Approval country/plates Germany Type approval per EC 2007/46 Body strength per EN 12642 24/7 service hotline Prepared for single-line registration plate holder Warning plate per ECE – 70 Outline marking with reflective tape according to ECE R 048, side white, rear red. Paintwork Frame: DB 7350 Novagrau '10-year warranty against corrosion' Support feet: galvanized Body: RAL of choice, single color Roll tarp: RAL 7035 light grey