Used Fliegl Vts 400 P for sale (53,783)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 9,900 kg, maximum load weight: 14,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction Turntable with robust ball bearing, storage box recessed Turntable extension Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear across the entire width Extendable wideners to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-loader type 3 pairs of tie-down points, each rated at 10 tons, integrated in the front of the floor 6 pairs of tie-down anchor plates, top and side in the outer frame, each rated at 10 tons 1 x in the neck area the rest distributed in between with a maximum distance of 1200 mm 1 x rear slope 5 pairs of pocket slots recessed in the outer frame, inside 70 x 40 mm, (can be converted to 5-ton ring tie-down eyes, not included in the scope of supply) Towing device, turntable trailer Tow bar with tested 40 mm towing eye Note! With a 40 mm towing eye, the permissible total weight of the truck must not exceed 18000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Axle / chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization in the front and rear (rocker equalization) Wheels & Tires 235 / 75 R 17.5, according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (beacon can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area: steel floor followed by 70 mm softwood floor, steel / diamond plate in the wheel arch area Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2800 mm long, 750 mm wide, laterally movable covered with wood with gas spring support Operating Instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle / support and saddle loads. Country of Registration / Signs Country of Registration: Germany 1 with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame: RAL 3002 Carmine Red Ppedpfx Apoi Ri I Eebew 10-year warranty against rust-through Tow bar: galv

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space height: 900 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Additional Information Low-bed semi-trailer chassis Steel welded construction Turntable with heavy-duty ball bearing ring Folding rear outriggers 2 support wedges with holder Aluminum side impact protection Rear splash guards covering the entire width Ppedei Ri Daspfx Apbjw Semi-fender for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess above the rear axles, extending to the rear, approximately 1800 mm long, approximately 650 mm wide and approximately 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess, laterally on the longitudinal frame, approximately 300 mm from the front and approximately 200 mm in front of the rear slope 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included) 1 storage box recessed in the gooseneck at the bottom with lid, W=720 mm/ L=520 mm / D= 170 mm Extendable widening elements to 3,000 mm (not in the rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Wooden planks 70 mm for widening to 3000 mm Storage compartment for wooden planks under the loading platform Lashing eyes for low-bed trailer (40 lashing options) 1 pair of lashing eyes on the gooseneck, each 5 tons 9 pairs of lashing eyes embedded above and on the side in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing eyes in the outer frame from the low bed, each 5 tons (for attaching tie-down straps) 3 pairs of folding lashing eyes additionally, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (protruding) 1 x behind the last axle, recessed in the floor Coupling device for the trailer turntable Drawbar with tested 50 mm drawbar eye, drawbar eye inclined by 8° / D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker equalization) Wheels and Tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning signs double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel / checkered plate covering followed by 70 mm softwood floor, wheel arch area with steel / checkered plate covering Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left-hand side at the front Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Country of Registration / Signs Country of Registration: Germany 24/7 Service Hotline prepared for two-line license plate holder Contour marking with reflective strips ac

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,500 kg, maximum load weight: 15,500 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space width: 2,520 mm, loading space height: 890 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further Information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Extendable widening elements to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down points for low-loader 1 pair of tie-down points on the gooseneck, each 5 tons 9 pairs of tie-down eyes embedded at the top and sides in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of tie-down holes in the outer frame of the low bed, each with 5 tons. (for securing lashing straps) Coupling device for trailer turntable Drawbar with tested 50 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical incl. Axle load equalization at the front and rear (lever equalization) Wheels and tires Psdoi Ri Izopfx Apbjpw 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED warning light with holder, switched via side lights (light can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin fail-safe plugs at the front, with connecting cable Floor Gooseneck at the front with steel/diamond plate thereafter with 70 mm softwood floor, in the wheel arch area steel/diamond plate Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with quick-release coupling NW 10/3, incl. connecting hose Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline included prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagrau 10-year warranty against rusting Drawbar galva

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system Psdpfxsi Ri I Ns Apbepw 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: used, empty load weight: 9,980 kg, maximum load weight: 30,020 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 02/2022, loading space length: 10,200 mm, loading space width: 2,520 mm, loading space height: 950 mm, suspension: air, tire size: 235/75R17.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, turntable, air suspension, ABS (anti-lock braking system), extendable to 3m, lashing points, 2-part loading ramps, hydraulic ramps, side aluminum fender, twin tires, wheel recesses. Superstructure: 4-axle low-bed trailer with wheel recesses, excavator arm recess, and hydraulic ramps, in like-new condition! Ppedpfxezg Ev Uo Apbsw 4x 10t SAF axles, drum brakes, total weight technically 40,000 kg, loading length of the gooseneck approx. 2800 mm, loading length of the low-bed platform approx. 7400 mm, extendable to 3000 mm, 50 mm drawbar eye, 1st pair of wheel recesses approx. 1600 mm long, 2nd pair of wheel recesses approx. 600 mm, ramp length approx. 3850 mm, ramps are hot-dip galvanized, ramps can be hydraulically shifted sideways. Loading height of the front wheel recess approx. 560 mm! Loading height of the rear wheel recess approx. 650 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT44001000966, empty load weight: 9,400 kg, maximum load weight: 30,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 10/2010, loading space length: 7,145 mm, loading space width: 2,750 mm, loading space height: 900 mm, total length: 12,120 mm, total width: 27,500 mm, total height: 900 mm, suspension: steel, tire size: 235/75 R17,5", color: red, The images shown are archive photos! Permissible / technical gross weight: 24,000 / 40,000 kg Permissible / technical payload approx.: 14,600 / 30,600 kg Permissible / technical axle load: 24,000 / 40,000 kg Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low bed platform length in wheel track area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loaded bed height in low bed approx.: 900 mm Drawbar height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Aluminum side underrun protection 1 plastic toolbox, Extendable width up to 3,250 mm (not at rear bevel) (track width of machine/vehicles to be transported must not exceed outer frame width of 2,750 mm) Storage compartment for wooden boards in the center of the loading area 70 mm wooden boards for extension to 3,000 mm 2 pairs of stake pockets in the low bed recessed into the longitudinal beams Lashing points low-bed: 2 pairs of lashing eyes on neck, 5 tons each 1 pair of lashing eyes in rear bevel 4 lashing eyes recessed in the middle of the floor 2 pairs of keyhole profiles in wheel track area for insertion of longitudinal guide rails and as additional lashing option 6 pairs of lashing pins recessed in outer low-bed frame, 10 tons each 5 pairs of stake pockets recessed in the outer frame of the low bed 4 additional pairs of 10 ton lashing eyes: - 1x on neck - 3x recessed in low bed floor Trailer towing device, turntable design Drawbar with certified 50 mm towing eye Axles & Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization front and rear (rocker balancing) Ppsdpfx Aeyxq A Hopbew Wheels and Tires 235/75 R 17.5" Steel twin wheels, factory silver finish Brake System 2-line compressed air brake system Spring-loaded parking brake 2 foolproof couplings at front, with interconnecting lines to tractor ABS and ALB, with ABS socket at front and connection cable Note: The trailer may only be towed by vehicles ensuring proper ABS functionality! Floor Neck area with steel / checker plate covering Followed by 70 mm softwood floor; in wheel arch area steel / checker plate Rear bevel with 70 mm softwood floor Loading ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, with wooden covering Hydraulically operated via tractor auxiliary drive Operating Notes At 10,000 kg axle load, an exemption permit is required, only indivisible loads permitted! Note! Oversize length and width require a permanent special permit. When applying for an exemption for regulated heavy haulage, an axle load indicator is required for air-suspended vehicles! This applies to any deviation from § 34 StVZO (axle and permissible total weight overrun), which requires an exemption under § 70 StVZO. The specified gross weight is technically possible; depending on the load, the total weight permitted by axle, support, and kingpin loads may not be achieved. (Poor driving or tracking behavior may occur due to improper load distribution) The images shown are archive photos!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,500 kg, maximum load weight: 15,500 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space width: 2,520 mm, loading space height: 890 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. More Information Chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 outrigger plates with holder Aluminum side impact protection Splash guards at the rear, covering the entire width Semi-elliptical fenders for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess starting above the rear axles and extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points, each 5 tons, in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope. 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included). 1 storage box recessed into the gooseneck with a cover, W=720 mm / L=520 mm / D=170 mm Extendable widening sections to 3,000 mm Wooden planks, 70 mm, for widening to 3,000 mm Storage compartment for wooden planks under the loading area Lashing points for low-bed trailers (40 lashing options) Pjdpfxji Ri A Ss Apbspw 1 pair of lashing points on the gooseneck, each 5 tons 9 pairs of lashing eyes recessed on the top and side of the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing points in the outer frame of the low bed, each 5 tons (tie-down strap attachment) 3 pairs of folding lashing points, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (overhanging) 1 x behind the last axle, recessed into the floor Coupling device, trailer turntable Tow hitch with tested 50 mm drawbar eye, drawbar eye inclined 8°, D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker arm equalization) Wheels and Tires 235 / 75 R 17.5, according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/diamond plate covering followed by 70 mm soft wood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm soft wood flooring Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring-assisted support Country of Registration/Signs Country of Registration: Germany 24/7 service hotline prepared for license plate holder, two lines Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning sign according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation, 15-year

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 24,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,290 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs Wheel chocks with holders Full-width rear mudflap 1 plastic toolbox Preparation for extensions to 3,000 mm (holes in outer frame with covers, not in rear bevel) #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 7 pairs of recessed 10 t lashing points in top and side outer frame 1 on front gooseneck 5 in low bed 1 in rear bevel 12 pairs of 5 t lashing holes in outer frame (for load straps) 5 on gooseneck, 6 in low bed and 1 in rear bevel #Drawbar Equipment Ppodpfx Ajznyrmjpbow Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R17.5 Manufacturer's choice Twin steel wheels, factory silver #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads with connecting lines to towing vehicle Connecting lines extended by approx. 60 cm Without ABS, with mechanical ALB, max. 60 km/h approval #Electrical System 12 V multi-chamber lights, without yellow side LED lights, with side reflectors 2 front white position lights 2 rear white/red outline marker lights 1 x 7-pin 12 V front plug with connecting cable, extended by approx. 60 cm 1 removable LED beacon with bracket, switched via side lights #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 5,900 mm #Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Registration / Plates Registration country: Germany With DEKRA inspection and approval report for max. 60 km/h registration, agricultural towing vehicle Prepared for two-line number plate holder Without contour marking / reflective strips according to ECE R 048 #Paint Finish Chassis hot-dip galvanised incl. passivation "15 Jahre Gewährleistung gegen Durchrostung" Drawbar galvanised or black, manufacturer's choice Loading ramps hot-dip galvanised

Condition: reconditioned (used), Year of construction: 2017, J&P casepacker KVKF 400, 2017 This J+P casepacker is designed for the automatic packaging of products into various types of cardboard packaging. The machine handles the following packaging formats, among others: Pedpjhtfc Ijfx Apbepw American case closed American case open Open trays

Condition: used, mileage: 3,57,000 km, power: 294 kW (399.73 HP), first registration: 03/2014, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: red, gearing type: mechanical, loading space length: 6,200 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2014, Equipment: ABS, air conditioning, SCANIA P 400 / 8x4 Tipper 6,20 m + CRANE + REMOTE CONTRROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2014 ? MILAGE: 357 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ?AIRCONDITION TIPPER: 620 x 242 x 100 cm (L x W x H) CAPACITY: 15 500 kg TOTAL WEIGHT: 32 000 kg TIRE SIZE: 315/80R22,5 WHEELBASE: 195/315/136 cm SUSPENSION: SPRING CRANE: PALFINGER PK 27001 - EH E + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ppjdpozp A Slsfx Apbew : 7292

Condition: used, mileage: 3,72,000 km, power: 294 kW (399.73 HP), first registration: 08/2015, fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: automatic, Year of construction: 2015, Equipment: ABS, air conditioning, Scania P 400 / 8x4 TIPPER Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? MILAGE: 372 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? POWER STEARING ? POWER STEERING ? TACHOGRAPH CAPACITY: 20 000 kg TOTAL WEIGHT: 34 000kg WHEELBASE: 195/240/135 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR Ppsdjv Sn Saepfx Apbew COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 83247

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Ppodpfx Apozqdbqjbjw Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, mileage: 4,00,000 km, power: 294 kW (399.73 HP), first registration: 08/2014, fuel type: diesel, overall weight: 34,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: automatic, loading space length: 5,900 mm, loading space width: 2,350 mm, loading space height: 900 mm, Year of construction: 2014, Equipment: ABS, air conditioning, crane, Scania P 400 / 8x4 TIPPER 5,90 m + BORDMATIC Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2014 ? MILAGE: 400 000 km EQUIPMENT: Ppsdpfx Apevi Durebsw ? ABS ? EL. WINDOWS ? POWER STEARING ?POWER STEERING ? TACHOGRAPH CAPACITY: 20 000 kg TOTAL WEIGHT: 34 000kg WHEELBASE: 195/235/138 cm TIRE SIZE: 315/80R22,5 SUSPENSION: SPRING TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 76474

Condition: used, mileage: 2,00,000 km, power: 294 kW (399.73 HP), first registration: 04/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: semi-automatic, emission class: euro5, Year of construction: 2013, Equipment: ABS, air conditioning, electronic stability program (ESP), * Scania P 400 sewer cleaning truck * First registration: 04-2013 * EURO 5 * Opticruise with clutch * Leaf spring suspension Podezn E R Ujpfx Apbepw * Air conditioning * Jurop DL 250 HDR, year of manufacture: 2022 * More pictures and videos available via WhatsApp * Information provided without warranty and subject to prior sale.

Condition: used, mileage: 3,76,219 km, power: 294 kW (399.73 HP), first registration: 10/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, color: white, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, Construction: Meiller tipper with telescopic extendable body, * Model AK 12 MT, * Additional headlights, * Storage compartment Equipment: * S cab, * Leaf spring/air suspension, * 40mm trailer hitch with continuous braking system, * Duo-Matic coupling * Air conditioning, * Heated driver's comfort seat * Sun visor, * Rear window, * Roof hatch, Technology: * Radio * AUX * Cruise control Safety/Environment: * Braking system with ABS and ASR, * Differential lock on rear axle, * Emission standard Euro 5, Other: Ppedpjzn Dppofx Apbow First delivery in Germany, * Payload 8.2 t according to ZLB (without container), * Permissible total weight 18.00 t, * Weight reduction from 21.00 t to 18.00 t * Data confirmation available, Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, at the Bremen Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles from the areas of vans, commercial vehicles and construction machinery in stock! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare a customized offer for you! We welcome the trade-in of your commercial vehicle/construction machine. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, price tags, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. The listed equipment may need to be checked separately. Subject to errors and prior sale.

Year of construction: 1990, condition: like new (used), Short/ Noodles pasta line: - capacity 400 kg / h - Delivery conveyor - mixer - dispenser, water / flour, horizontal - worm conveyor - Press Ppodpfeh Dxgaex Apbjw - Vibro feeder , reconditioned in 2010 - First dryer , reconditioned in 2010 - Secound Dryer - Two drying strips - Two strips for dried pasta - Metal Detector - Automatic packing unit

Condition: used, mileage: 7,99,039 km, power: 294 kW (399.73 HP), first registration: 02/2010, fuel type: diesel, empty load weight: 12,055 kg, axle configuration: 3 axles, brakes: retarder, color: other, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel-air, Equipment: air conditioning, , Manufacturer: Scania - Type/Model: P 400 LB6X2 - First registered: 16.02.2010 - Mileage: 799,039 km - Number of axles: 3 - Emissions class: Euro5 - Gearbox: Manual transmission - Suspension: Leaf-air - Lift axle - Brake: Disc - Length: 8600 mm - Width: 2500 mm - Height: 3380 mm - Empty weight: 12055 kg - Body manufacturer: Schwarte - Tank material: Stainless steel - Total tank volume: 15000 L - Tank chambers: 1 - Baffles - Insulated - System designation: Impeller system - Impeller pump - MAK 3002 - CIP cleaning Pjdov Awc Njpfx Apbopw

Condition: good (used), Year of construction: 1992, Bandsaw automation machine, manufacturer JAESPA, type: W400 AZ Control system: Minipos 807, year of manufacture: 1992 Cutting diameter for round material: max. 400 mm Pedpfx Aogf H Saopbepw Saw blade length: 5500 x 32 x 1.1 mm Feed: automatic, section length: min. 20 mm Chip conveyor Total power consumption: 4 kW Weight: approx. 2500 kg Accessories: 2 saw blades, roller conveyor 6 m, motorized drive, machine documentation available. Space requirement: 2.8 x 2.8 x 2 m

Condition: used, mileage: 5,89,000 km, power: 294 kW (399.73 HP), first registration: 01/2011, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, color: blue, gearing type: mechanical, loading space length: 4,900 mm, loading space width: 2,460 mm, loading space height: 600 mm, Year of construction: 2011, Equipment: ABS, air conditioning, SCANIA P 400 / 4x2 Tipper 4,90 m + CRANE + REMOTE CONTRROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2011 ? MILAGE: 589 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH ?AIRCONDITION TIPPER: 490 x 246 x 60 cm (L x W x H) CAPACITY: 8 000 kg TOTAL WEIGHT: 19 000kg TIRE SIZE: 13R22,5 WHEELBASE: 390 cm SUSPENSION: SPRING CRANE: FASSI F110A.23 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Ppsdszah Eyjpfx Apbsw * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 51796

Condition: used, functionality: fully functional, Year of construction: 2021, total height: 4,254 mm, total length: 15,500 mm, total width: 4,400 mm, load capacity: 1,600 kg, Professional crane system P 400 with chain hoist type SIXX 8AF-HF, load capacity: 1600 kg, lifting height 5 m. All technical specifications can be found in the technical documentation (see PDF). An advantage is that the crane can be easily extended thanks to its modular design. IMPORTANT: The crane system comes without travel drives!!!! Ppjdpfx Aoxyhmcopbsw

Condition: good (used), x-travel 400 mm y-travel 375 mm z-travel 250 mm table-size 205 x 800 mm T-slots 4 x 45 14 H7 speeds 50 - 3150 U/min tool taper 40 ISO quill stroke 50,0 mm Feeds X + Z Axis 5.0 - 1000 mm/min Feeds Y Axis 5.0 - 670 mm/min rapid traverse 2.4 / 1.6 m/min control Heidenhain total power requirement 5.1 kW weight 950 kg range L-W-H 1860 x 1790 x 1750 mm Machine from a vocational training center In good condition (!!) Equipment: - MAHO universal tool milling/drilling machine - HEIDENHAIN "TNC 135" positioning/path control * 3-axis manual data input control * Programmable by the machine operator Ppjdpfexl E Sysx Apbow * Convenient and easy operation - Electric motor-driven feed rates in all axes (X/Z/Y) * X and Z axis: 5.0 - 1000 mm/min with rapid traverse of 2.4 m/min * Y axis: 5.0 - 670 mm/min with rapid traverse of 1.6 m/min - Tiltable milling head to both sides - Tiltable T-slot universal table - Vertical clamping range - Continuously variable speed adjustment - Manually extendable spindle sleeve - Hardened and ground guideways - Electro-hydraulic tool clamp - Coolant system - Front coolant tank - operating instructions

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Summa 1400 FME-p” production system Item for sale: 1 x Summa 1400 FME-p Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). The device has been tested for functionality. A test print can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Psdpfx Apszb Aktsbspw Sea-worthy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, you’re welcome to contact us directly.

Condition: new, For sale is a new, unused three-phase electric motor, LOHER ANGA-355LB-04A, with a power rating of 270 kW. The motor comes from warehouse stock (NOS – New Old Stock). It has never been installed or used. Its technical and visual condition is very good, with only minor signs of storage. Manufactured in Germany, it features a robust, industrial design. It is ideally suited for driving pumps, fans, compressors, crushers, conveyors, and other industrial machines. Technical specifications: Manufacturer: LOHER Pjdpfx Aozn Awxjpbepw Model: ANGA-355LB-04A Power: 270 kW Rotational speed: 1490 rpm Frequency: 50 Hz Voltage: 400/690 V (Δ/Y) Voltage range: 380–420 V Δ / 655–725 V Y Power factor (cos φ): 0.85 Protection class: IP55 Insulation class: F Mounting design: IM B3 Standard: EN 60034 / IEC 38 Country of manufacture: Germany

Condition: excellent (used), For sale is an SEW-EURODRIVE SPIROPLAN WA20DT71D4 geared motor with a 0.37 kW three-phase motor. The unit is fully functional, tested, and ready for operation. The geared motor is in good technical and visual condition. It shows normal signs of wear and tear from use. The power cable, as shown in the pictures, is included. Thanks to its compact design, the geared motor is ideally suited for driving conveyors, production machines, packaging machines, feeders, and many other industrial devices. Technical data: Manufacturer: SEW-EURODRIVE Gearbox type: WA20 Motor type: DT71D4 Complete type: WA20DT71D4 Power: 0.37 kW Supply: 230/400 V Δ/Y Frequency: 50 Hz Motor speed: 1380 rpm Ppsdpfxjznlb Hj Apbsw Output speed: 71 rpm Gear ratio: i = 19.44 Torque: 36 Nm Rated current: 2.15/1.24 A Protection class: IP54 Insulation class: B Operating mode: S1 Design: Universal Weight: 8.685 kg Country of origin: Germany

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR geared motor with a three-phase Lenze DERA071-12 motor, 0.25 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the photos. This geared motor with a worm gear is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze Motor type: DERA071-12 Power: 0.25 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1365 rpm Output speed: 186.6 rpm Torque: 11 Nm Gear ratio: i = 7.5 Protection class: IP55 Insulation class: F Duty cycle: S1 Condition: Podpfx Apszncq Sebopw 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the photos.