Used Frewitt Mf 8 for sale (36,530)

Condition: refurbished (used), FREWITT MF 8 Granulator / Oscillating Mill This granulator with adjustable sieve/support tray device (thereby preventing excessive sieve and rotor wear) can be used universally for dry granulation, sieving, crushing, wet granulation, etc. with a capacity of 2,000 kg/hour depending on the product properties. Infinitely adjustable gear motor (43-248 oscillations/min) Opening of the granulating chamber: 380 x 490 mm Active sieve area: 775 cm² Outlet height above floor: approx. 100 cm Drive motor: 2.2 kW Manufacturer: Frewitt Gbjdpfx Aaoxvzf Djtet Year of construction: 2002 Floor Space: 110 x 120 x 190 cm

Condition: refurbished (used), functionality: fully functional, FREWITT MG-803 OSCILLATING SCREENING MILL / GRANULATING MACHINE Completely overhauled in 2026 – Pharmaceutical version – comprehensively documented CONDITION Used Frewitt MG-803 in exceptionally good, fully overhauled condition. As part of a comprehensive mechanical and electrical general overhaul, the machine was completely disassembled, cleaned, technically refurbished, and professionally reassembled in 2026. The entire overhaul is detailed in a 101-page overhaul report with numerous photos, drawings, spare parts lists, and work steps. APPLICATION Oscillating screening and granulating machine for applications, in particular, in the pharmaceutical, chemical, and food industries. Stainless steel version with professionally refurbished product-contact surfaces for high hygienic requirements. COMPLETE OVERHAUL 2026 The following work was carried out as part of the overhaul, among other things: - Complete disassembly of the machine - Overhaul of fixed and moving bearing heads - Refurbishment of the connecting rod drive and guide units - Ultrasonic cleaning and refurbishment of the components - All deep groove ball bearings, cylindrical roller bearings, and linear bearings replaced Gjdpfezu Tu Iox Aatobt - All radial shaft seals and Garlock seals replaced - Joint screws newly manufactured from stainless steel 1.4305 - Electric motor and gearbox completely overhauled by a specialist company - New bearings and seals in the drive - Drive components sandblasted and protected with a protective coating - New conductive and lockable swivel casters - Safety device of the machine door overhauled - Complete reassembly and final function test PHARMACEUTICAL SURFACE FINISH All product-contact stainless steel surfaces were professionally ground and polished by a specialized company. Surface roughness of product-contact surfaces: Ra ≤ 0.8 µm TECHNICAL DATA Manufacturer: Frewitt Model: MG-803 Year of manufacture: 1997 Machine type: Oscillating screening/granulating machine Version: Pharmaceutical/stainless steel version Installation: mobile Product-contact surfaces: Ra ≤ 0.8 µm Complete overhaul: 2026 SCOPE OF DELIVERY - Frewitt MG-803 - Stainless steel feed hopper - Stainless steel discharge hopper - Rotor - Screening unit / sieve basket with lateral guide rails - Extensive selection of various sieve inserts - Complete drive and connecting rod system - Protective cover and safety sensors - Mobile stainless steel frame with new conductive, lockable rollers FUNCTION TEST After the complete overhaul, the machine was completely assembled and subjected to a function test. The MG-803 runs very smoothly and vibration-free and is ready for immediate use. DOCUMENTATION Extensive documentation available: - Original operating instructions - Technical drawings - Parts lists - Electrical documents - Maintenance and conformity documents - 101-page overhaul report of the complete overhaul in 2026 with extensive photo and work documentation INSPECTION / TEST RUN Inspection and test run possible by appointment. Subject to prior sale and errors.

Year of construction: 2008, condition: used, functionality: fully functional, FREWITT MF-LAB – PHARMACEUTICAL LABORATORY MILL / GRANULATOR For sale: FREWITT MF-LAB laboratory mill / oscillating sieve mill, used in pharmaceutical applications, in excellent used condition. The machine is supplied with an extensive package of 13 original sieve inserts in different sizes, as well as comprehensive original documentation and qualification documentation. TECHNICAL DATA Manufacturer: FREWITT SA, Switzerland Model: MF-LAB Year: 2008 Serial No.: 6180310817 Electrical supply: 400 V / 50 Hz Current: 16 A Design: ATEX APPLICATION The MF-LAB is designed for laboratory and pharmaceutical applications and can be used for gentle size reduction, calibration, and sieving of dry or moist products. Particularly suitable for: - Pharmaceutical R&D - Laboratory and pilot applications - Granule calibration - De-agglomeration - Sizing and sieving - Heat-sensitive products EXTENSIVE SIEVE PACKAGE A major advantage of this machine is the large number of included sieve inserts. Included are 13 marked sieve inserts in 9 different designs/sizes. Gbsdpezxdgijfx Aatjt All sieves shown in the photographs are included in the scope of supply. DOCUMENTATION Comprehensive original documentation and qualification documentation are available with the machine. CONDITION Excellent, very clean used condition from pharmaceutical use. Inspection and demonstration can be arranged by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged upon request. CYCRON GmbH Switzerland Invoice will be issued by CYCRON GmbH. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Very well-maintained and robust Heesemann MFA 8 wide-belt sanding machine for professional use. This machine is particularly suitable for surface, fine, and finish sanding and features electronic control as well as cross and longitudinal sanding units. Gsdpfszxyfhex Aatjbt The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 980 mm Feed width: 1300 mm Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross-belt unit Longitudinal sanding unit Brush units Suitable for finish, fine, and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Feed carpet Dust extraction connections CE marking Transportation possible for an additional charge! The machine is currently still at the customer's site but would be immediately available! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1289892, FREWITT MG-800 OSCILLATING SCREENING AND GRANULATING MACHINE Pharmaceutical version – Stainless steel – Comprehensive documentation DESCRIPTION For sale is a Frewitt MG-800 oscillating screening and granulating machine in high-quality stainless steel/pharmaceutical version. The machine is in very good and well-maintained condition and is fully functional. The MG-800 is suitable for the controlled crushing, granulation and screening of products, especially in the pharmaceutical, chemical and food industries. The oscillating operating principle, in combination with interchangeable screen inserts, allows for adaptation to different products and desired particle sizes. PHARMACEUTICAL/STAINLESS STEEL VERSION The original Frewitt specification documents a high-quality stainless steel design: - Machine body stainless steel 1.4401 - Product-contacting parts stainless steel 1.4301 - Product-contacting interior surfaces polished - High-quality, hygienic design - Enclosed machine design The system was designed for professional use in demanding production environments. TECHNICAL DATA Manufacturer: Frewitt, Switzerland Gjdpfx Aajvt Sywstebt Model: MG-800 Machine No.: 1289892 Machine type: Oscillating screening/granulating machine Voltage: 380 V Frequency: 50 Hz Current consumption: 4.4 A Version: Stainless steel / Pharmaceutical version EQUIPMENT - Frewitt MG-800 granulating machine - Stainless steel feeding system - Stainless steel discharge system - Rotor - Screen basket - Extensive selection of various screen inserts - Infinitely adjustable speed control - Protection and safety devices - Separate operating/control unit - Sturdy stainless steel base - Extensive stainless steel piping and connections The various screen inserts available allow for flexible adaptation to different products and desired granule or particle sizes. DOCUMENTATION Extensive original Frewitt documentation is available for the machine, including: - Technical documents - Original drawings - Design drawings - Specification and material specifications - Spare parts/component information The available original documentation is particularly advantageous for use in pharmaceutical and industrial environments. CONDITION / FUNCTION The machine is in very good used condition and is fully functional. Inspection and test run are possible by arrangement at our premises. Price on request. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 208-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 52 mm Shot weight: 502 g Injection pressure: 1893 bar Dosing volume: 552 ccm Clamping unit: Clamping force: 208 t Tie bar spacing: 530x530 mm Platen size: 790x765 mm Ejector: electric Clamping unit: toggle Control system: BECKHOFF - Touchscreen Gsdpfx Aaezy Iztjtebt Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine has been serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 6800 kg Length/Width/Height: 6.10x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2014, operating hours: 43,665 h, functionality: fully functional, machine/vehicle number: 15175183874, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, feed length X-axis: 1,800 mm, feed length Y-axis: 1,100 mm, feed length Z-axis: 900 mm, operating hours of spindle: 17,437 h, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, 5-Axis Traveling Column Milling Machine DMG MORI DMF 180-7 | Year of Construction 2014 | B-Axis & Integrated Rotary Table For sale is a high-precision 5-axis traveling column milling machine from the manufacturer DMG MORI, model DMF 180-7, from the year 2014. The machine is extensively equipped and features a B-axis (swivel head) and a rotary table integrated into the fixed table for complex machining operations. General Machine Data * Manufacturer: DMG MORI * Model: DMF 180-7 * Year of Construction: 2014 * Machine Number: 15175183874 * Operating Hours: 43,665 h * Spindle Hours: 17,437 h * Machine Weight: approx. 13,250 kg Working Area & Dynamics * X-Axis: 1,800 mm * Y-Axis: 700 mm * Z-Axis: 700 mm * Rapid Traverse: 40 m/min * Acceleration: 4 m/s² Control System * Type: 3D Control Siemens SINUMERIK 840D sl Gbedpfx Aaezyplgotjt * Control Panel: ERGOline Control with 19" screen * Software Options: Surface interpolation TRACYL, COMPCAD compressor function (for HSC machining), 3D machining/tool correction, turning-milling cycle Spindle & Milling Head (5-Axis Configuration) * Head: Swivel head (B-axis) * Speed: 20 to 14,000 rpm * Spindle Power: 18.9 / 14 kW (40/100% ED) * Tool Clamping: SK40 according to DIN 69871 Tool Table * Design: Fixed table with centrally integrated rotary table * Clamping Area Fixed Table: 2,100 x 700 mm * Rotary Table Diameter: 750 mm * Max. Load Capacity Rotary Table: 500 kg Tool Changer * Magazine Capacity: 60 positions SK40 * Type: Chain magazine with dual gripper * Chip-to-Chip Time: 7.6 s Coolant, Disposal & Extraction * Internal Coolant Supply (ICS): 40 bar / 980 l system with paper band filter * Chip Disposal: Chip conveyor (drag chain) * Extraction: Oil and emulsion mist separator (1,600 m³/h) * Additional Functions: Air blow through the spindle center (via M-function), coolant gun for chip flushing Additional Equipment & Measuring Technology * Measuring Probe: Infrared measuring probe TS649 DMG * Kinematic Measurement: Preparation for 3D quickSET Toolkit * Cabin: Full cabin with operating mode 4 From an insolvency proceeding, sale in open auction. Offer deadline until September 30, 2026, 6:00 PM. Package price for several machines from this proceeding is possible. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH website under Auctions.

Condition: used, functionality: unexamined, machine/vehicle number: RHE E 180 MF, input voltage: 380 V, suction capacity: 1.692 m³/h, HVB Hansa Blower / Fan Godoxixqwspfx Aatebt Manufacturer: Hansa Ventilatorenbau Model: RHE E 180 MF Capacity m3/h: 1,692 Power kW: 1.5 Voltage: 380 Volt.

Condition: excellent (used), Year of construction: 2020, Baling press, MACFAB, – used –: Price ex works: €13,500.00 (net)! Manufacturer: MACFAB Systems Ltd Type: BMF650 Auto HT RAL - MM9.8 Year of manufacture: 01/2020 Serial number: MF J144 Weight: 1770 kg Operating hours: approx. 16h Automatic operation & "Bale ready" indicator Gbsdpfx Ajzxciijatet Horizontal door that pivots to the side Surface / Color: RAL6018 Feed opening: 1,500x880x769mm (WxHxD) Dimensions, press: 2,100x1,524x3,217mm (WxDxH) Former new price: €18,921.00 Condition: The machine was only used once for testing purposes. Available: immediately Location: 72336 Balingen

Year of construction: 1997, condition: good (used), • Working width (mm): 1300 • CSD system Gjdpfx Aaeidi Ivstjbt • Cross-sanding unit • Longitudinal sanding unit - shoe • Brushing unit • Ionization

Condition: new, Magnetizer Magnet Physics MF-RI8 Item condition: New without OVP The item comes from a company liquidation from the automotive industry and was temporarily stored in paternosters. Storage traces possible. R12B1_EK Financing through our bank is also possible. komplett-konzept.leasingo.de Further magnetizing devices - new and used - you will find in our store! International shipping costs on request! Gsdsivdl Tspfx Aatsbt

Condition: ready for operation (used), Year of construction: 2019, total height: 1,505 mm, total width: 955 mm, product length (max.): 1,565 mm, number of axes: 3, This 3s HP 580 MFG COLOR was manufactured in 2019. It features a build volume of approximately 332 × 190 × 248 mm and a printhead resolution of 1200 dpi. With a build speed of up to 1,817 cm³/hour, it utilizes PA12 nylon for full-color capabilities. If you are looking to get high-quality 3D printing capabilities, consider the HP 580 MFG COLOR machine we have for sale. Contact us for further details. • Build volume: approx. 332 × 190 × 248 mm Gbjdpfx Aoyirxcsatet • Layer thickness: 80 microns • Printhead resolution: 1200 dpi • Build speed: up to approx. 1,817 cm³/hour • Material: PA12 nylon (full-color capable) • Color output: full CMYK color with voxel-level control • No support structures required for most geometries • Software: HP SmartStream 3D Build Manager • Supported file formats: 3MF, STL, OBJ, VRML • Connectivity: Gigabit Ethernet • Power supply: 200–240 V, 50/60 Hz • Typical power consumption: approx. 4.5–6.3 kW

Year of construction: 1993, condition: ready for operation (used), controller manufacturer: SIEMENS, Metal Band Saw manufactured in 1993. This Friggi 2MF/AUT 800 x 800 2C features a cutting capacity of 800 x 800 mm and a round diameter of 800 mm. It is equipped with a powerful 7.4 kW saw blade motor and a hydraulic pump with a delivery rate of 58 L/min. If you are looking to get high-quality cutting capabilities, consider the Friggi 2MF/AUT 800 x 800 2C machine we have for sale. Contact us for further details. Gbjdpeznazbefx Aatot - Cutting Capacity (Rectangular): 800 x 800 mm- Cutting Capacity (Round Diameter): 800 mm- Front Minimum Cut: 105 mm- Rear Minimum Cut: 50 mm- Band Pulley Diameter: 900 mm- Blade Dimensions: 67 x 1.6 mm- Blade Length Range: 9,680 - 9,800 mm- Saw Blade Speed: 20 - 90 m/min- Saw Blade Motor Power: 7.4 kW- Saw Arm Movement Motor Power: 7.1 kW- Automatic Saw Arm Lowering Speed: 0 - 3000 mm/min- Hydraulic Pump Reservoir Capacity: 115 L- Hydraulic Pump Delivery Rate: 58 L/min- Hydraulic Pump Motor Power: 9.2 kW- Total Installed Power: 26 kW- Power Supply Voltage: 380 V- Frequency: 50 Hz- Machine Colors: RAL 6011 / RAL 2004- Control System: Siemens Simatic Panel / UniOP Panel- Included Equipment / Scope of Delivery: Hydraulic aggregate unit, standalone electrical control cabinet, control panel, material feed roller conveyor table

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x780x1500 mm Weight 500 kg Gsdpfx Aasvz Htuotobt Total power requirement 2 kw

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Gbodpfxoxk Tg Nj Aatst Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: like new (used), Year of construction: 2015, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 151515, input voltage: 400 V, GERNEP Rollfeed 8-480 labeller. Up to 8,000 bottles/hour. Year of manufacture: 2015. Supported formats: 0.5L, 1L, 1.5L, 2L. The equipment was purchased from the bankruptcy of a Belgian company specializing in production lines. The machine appears to be as new—everything indicates it was set up for production, but it never left the plant that prepared it for operation. Label counters show just 9,000 units. The machine has no damages, the computer switches on and displays all system messages. In the attached photos, the system date is not set, which is why the current messages show a 2009 date. However, the machine was manufactured in 2015. Additionally, included is a full pallet of spare parts and plates for labelling 1L bottles. Gbedpfx Ajx Hph Deatjt This is truly an excellent offer—the machine is practically new, the price is very attractive and non-negotiable! The video shows an identical machine in operation.

Condition: reconditioned (used), Year of construction: 2020, machine/vehicle number: W20-0648-01, functionality: fully functional, Kiekens mobile dust extractor, type: DMF1258M-B1Z22, number: DM1200000, year of construction: 2020, 400 V, 3 Ph, 50 Hz, 16 A, 2.2 kW, weight: 330 kg, dimensions: 800 mm x 950 mm x 2100 mm, serial number W20-0648-01. The dust extractor was completely cleaned and checked. Dustmaster 1200 The Kiekens Dustmaster DM1200 series is designed to quickly and effectively extract (fine) dust. By applying the Kiekens K-series modular concept, the Kiekens Dustmaster DM1200 series can be widely used. The DM 1258 is designed for a variety of extraction processes, in either fixed, centralised or mobile applications, for: ƒ grinding / milling / polishing ƒ sandblasting / sanding , cutting / routing, ƒ packaging / mixing ƒ welding. ■ Extraction of powders, chips and fumes including: ƒ metals ƒ plastics / synthetics ƒ food / pharmaceutical ƒ rubber / leather ƒ wood ƒ others ■ A 2m or 3m extraction arm for variable extraction movement is optional. Gjdpovccc Iefx Aatjbt Principle of operation and benefits: The dust-loaded air enters the Dustmaster through the Ø160mm inlet via a hose or extraction arm (optional upon request). o The elbow arrests dust movement, and the tangential inlet causes a cyclonic effect to enhance the separation of the dust from the air stream. p The heavier dust particles are separated from the air stream and collected in the oversized 120 litre dust container. The large volume enhances dust settlement and allows longer operations. q The air streams upwards towards the powerful 2.2 kW industrial fan, which produces high suction performance. r The lighter dust particles are collected on the large high efficiency M class 5.8 m2 envelope (or 8.8 m2 cartridge) filter, with DM 1258M (ENVELOPE FILTER) ƒ Heavy-duty polyester needle felt (PNF) with Teflon coating, envelope-type filter design ƒ High efficiency, M class. Motor starter with phase indication lamp ƒ Filter monitoring pressure gauge; Filter cleaning handle for DM 1258 (motorised option available) High capacity 120 litres dust container provides high dust handling capacity. ƒ Castors for easy movement ƒ Detachable with simple release lever ƒ Special versions for the explosion zones 2 (gas) and 22 (dust) are available. Other zones and earthed options on request. Disposable bags can be used to line the container For the Romanian companies, there is the possibility of financing leasing in instalments with a minimum of 40-50% down payment. Price 4.200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten /Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare. We speak English. /Wir sprechen Deutsch. / Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2008, operating hours: 61,300 h, functionality: fully functional, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, pressure: 2,429 bar, Here we are offering the following well-maintained used injection moulding machine as part of our injection moulding machinery trading business. Of course, we are also actively purchasing well-maintained injection moulding machines from model year 2010 onward. We have been a wholesale dealer of injection moulding machines for over 25 years. ++++From Pharmaceutical Cleanroom Production++++ Manufacturer: KraussMaffei Machine type: KM 120-380 EX International size designation: 380 EX / 120 Machine no.: 61011287 Year of manufacture: 2008 Machine hours: 61,300 h Control system: MC5 Technical data - Clamping unit Clamping force: 1,200 kN Tie bar spacing H x V: 470 x 470 mm Platen size H x V: 780 x 735 mm Min. mould height: 200 mm Max. mould height: 450 mm Max. platen distance: 850 mm Opening stroke: 400 mm Ejector stroke: 150 mm Ejector force: 22 kN Centric ring for moving platen D: 160 mm Centric ring for fixed platen D: 125 mm Mould weight: 1,485 kg Technical data - Injection unit Screw diameter: 35 mm Stroke volume: 156 ccm Injection pressure: 2,429 bar Screw length: 23 l/d Screw speed: 289 rpm Plasticising rate: 27 g/s PS Free shot weight: 477 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions LxWxH: 6 m x 1.7 m x 2.19 m Total weight: 9,700 kg Equipment Display language German Display language English Gsdpfoy D Adtjx Aatebt +++Extras++++ Automation: Handling unit / extraction robot included – Handling: LR 100-2300 Conveying equipment: roller conveyor included CE marking: available Complete maintenance and inspection history Full latest test report Incl. conveyor belt, incl. cage Machine with water battery Machine without material hopper Levelling elements EUROMAP 12 interface Electrics Schuko socket 10A CEE socket 16A Voltage: 400 V Frequency: 50 Hz Motor current: 80 A Warranty Warranty up to first commissioning Loading / Shipping Free loading onto buyer's truck or free delivery within Germany subject to freight reimbursement Available ex stock Hanover, Germany

Condition: excellent (used), mileage: 7,92,487 km, power: 299 kW (406.53 HP), first registration: 06/2009, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 10,930 mm, total width: 2,550 mm, loading space length: 7,250 mm, loading space width: 2,500 mm, loading space height: 1,030 mm, Year of construction: 2009, Equipment: crane, Crane Number of hydraulic extensions: 5 Number of manual extensions: 1 Remote control: ✓ XLRAS85MCOE854827 = More information = Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Lift axle; Steering Weights Empty weight: 18.795 kg Carrying capacity: 9.305 kg GVW: 28.000 kg Max. towing weight: 50.000 kg Functional Crane: HMF 4220 K4, year of manufacture 2009, behind the cab Height of cargo floor: 103 cm Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request Identification Registration number: BV-ZV-65 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Gsdeyrtukspfx Aatebt When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), mileage: 6,92,340 km, power: 353 kW (479.95 HP), first registration: 07/2007, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro4, suspension: steel-air, Year of construction: 2007, Equipment: air conditioning, central locking, cruise control, fog lights, spoiler, = Additional options and accessories = Gsdpfx Aaozucmaetjbt - Mirror heating - Passenger seat - PTO - Rear lighting - Side skirts - Sleeping cabin - Spoilers - Sun visor = More information = Front axle: Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle 1: Tyre profile left: 50%; Tyre profile right: 50%; Suspension: air suspension Rear axle 2: Lift axle; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: air suspension Empty weight: 15.400 kg Carrying capacity: 12.600 kg GVW: 28.000 kg Crane: HMF 4220 K4 Flyjib lier winch, year of manufacture 2007, behind the cab Technical condition: good Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, mileage: 3,32,000 km, power: 346 kW (470.43 HP), first registration: 03/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: semi-automatic, Year of construction: 2013, Equipment: ABS, crane, electronic stability program (ESP), parking heater, RENAULT KERAX 460 – FLATBED WITH CRANE – 8 X 4 – SIDE BOARDS – 10.2M CRANE – WITH CRANE JIB – * VEHICLE HISTORY * VIDEO AVAILABLE UPON REQUEST * IMMEDIATELY READY FOR USE / CRANE & TRUCK * VEHICLE HAS FRENCH DOCUMENTS VEHICLE EQUIPMENT * AUTOMATIC TRANSMISSION * ENGINE BRAKE * CRUISE CONTROL * DIFFERENTIAL LOCK * REVERSING CAMERA * LEAF SPRING SUSPENSION * HMF CRANE WITH CRANE JIB * CRANE TYPE: 2200-K3, YEAR OF MANUFACTURE: 2013 * 10.2 M LONG * CRANE CAN BE OPERATED MANUALLY AND VIA REMOTE CONTROL (REMOTE CONTROL NOT INCLUDED) * 7 M LONG Gjdpfx Aezw Sb Esatsbt * 2.48 M WIDE * 1 M SIDE BOARD HEIGHT * FLATBED HAS A METAL FLOOR * 1 TANK * PERMISSIBLE TOTAL WEIGHT: 32,000 KG * UNLADEN WEIGHT: 16,360 KG * PAYLOAD: 15,640 KG * TIRE SIZE: 12R22.5 * GOOD TIRES * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR * EXPORT REGISTRATION CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS REGISTRATION, AND 15 DAYS AUSTRIAN REGISTRATION EURO 1 TECHNICAL DATA SHEET * VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. * For sales to the EU & third countries, a deposit of at least EUR 500.00 / EUR 1,000.00 will be charged. * Subject to change, errors and prior sale! More vehicles can be found on our website. Sales are exclusively made according to our general terms and conditions - see homepage. * Important note - Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is without guarantee and does not constitute a legal claim. * Legal: This sales advertisement does not constitute an offer in the sense of Section 145 of the German Civil Code (BGB). Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: good (used), mileage: 2,53,000 km, power: 427 kW (580.56 HP), first registration: 11/2017, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, operating hours: 2,500 h, Equipment: EBS, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), hill-start assist, onboard computer, power mirror, retarder, spoiler, = Additional options and accessories = - Roof spoiler - Low noise - Enclosed cab - Intarder - Cab - Air conditioning - Refrigerator - Leather interior - Leather upholstery - Alloy wheels - Radio/CD player - Sun visor - Toolbox - Power take-off (PTO) = Further information = Front axle: Steerable Unladen weight: 16,953 kg Payload: 9,050 kg GVW: 26,000 kg Upholstery: Leather CE marking: yes Technical condition: good Optical condition: good Gbjdpfx Aezaq Ttjatot

Condition: used, operating hours: 148 h, number of beds: 30, Operating hours: 148, initial registration: 02/02/2026. Initial registration: 02/02/2026. Operating hours: approx. 150. Standard equipment/technical data: ENGINE. Max. power 132/180 kW/hp (ISO 14396). Max. power with power management 155/210 kW/hp. Max. torque 750 Nm, with power management 860 Nm. Registered power 148 kW (ISO 14396). Max. power to the PTO 114/155 kW/hp (OECD). 6 cylinders, 6.6l AGCO Power - 66 AWF, CR, 4V. Exhaust aftertreatment with DOC – diesel oxidation catalyst, SCR 3rd generation & diesel particulate catalyst. Emission standard: Stage 5. Electronic engine control with Vistronic fan control. Engine speed memory. PowerCore engine air filter with coarse dirt extraction. EasyCare cooler package. 305 liter fuel tank. Gbsdpfx Aaozpcu Hotjt

Condition: excellent (used), mileage: 3,59,565 km, first registration: 03/2017, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: AdBlue, crane, = Additional Options and Equipment = - PTO = Further Information = Axle Configuration Front axle: Steering Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steering Functionality Mast: Telescopic (8 sections) Mast length: 25.1 m Lifting capacity: 7,180 kg Lifting height: 2,510 cm Crane: HMF 4020-K8, mounted behind the cab Body manufacturer: HMF 4020-K8 CE marking: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request Gbsdpfx Aaeuxwprotjt MAN TGX 33.560 8X4 TRIDEM + HMF 4020-K8 CRANE EURO 6 L PACKAGE 560 HP 8X4 TRIDEM DRIVE, REAR AXLE LIFT AND STEERABLE AIR SUSPENSION WHEELBASE 360 CM AUTOMATIC TRANSMISSION WITH ENGINE BRAKE TGX SLEEPER CAB WITH AIR CONDITIONING, NAVIGATION, LEATHER, REFRIGERATOR OPEN LOADING PLATFORM WITH REMOVABLE ALUMINIUM SIDE BOARDS LOADING PLATFORM LENGTH 650 CM HOOK EYES, STAKE POCKETS MULTIPLE TOOL BOXES HMF 4020-K8 CRANE 8X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL OIL COOLER FOR CRANE HYDRAULICS WORKING HEIGHT 25.1 METERS MAX LIFTING CAPACITY 7,180 KG MAX LIFTING CAPACITY AT 2,130 CM 1,010 KG 4X OUTRIGGERS 5th AND 6th FUNCTION FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: good (used), mileage: 2,93,578 km, first registration: 11/2009, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,550 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, total length: 7,600 mm, total width: 2,550 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 8,400 kg, Year of construction: 2009, Equipment: crane, = Further Options and Accessories = - PTO Gsdsxv R Etspfx Aatebt = Further Information = Technical Information Number of cylinders: 4 Engine displacement: 4,462 cc Max. front axle load: 4,400 kg Max. rear axle load: 8,400 kg Weights Unladen weight: 3,300 kg Payload: 8,690 kg Gross vehicle weight: 11,990 kg Functional Crane: HMF 850-K2, mounted behind the cab Body manufacturer: DAF Condition Technical condition: good Visual condition: good Identification Registration number: 21-BTT-1 = Company Information = You can find our complete range here: