Used Gabler Thermoforming Machine for sale (65,024)

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Ndodjunia Hspfx Aiysa

Condition: excellent (used), Year of construction: 2006, Manufacturer Gabler Model M92 L Year 2006 Condition Very Good Stock Number 00006 Max forming area 750 x 436 mm Depth of draw 150 mm Nodpew Rpzqsfx Aiysda Max material width 835 mm Max cycles / min 44 Max mould closing force 350 kN Max top heater output 81.90 kW Max bottom heater output 54.60 kW Operating air pressure 8 bar Power Supply 230V 50Hz Total Connected Load 138.66 kW Approx Dimensions 7,925 x 5,320 x 3900mm (LxWxH) Approx Weight 10,400 kg Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2016, operating hours: 40 h, condition: like new (used), functionality: fully functional, 💎 Highlight: Only approx. 60,000 packs (approx. 40 operating hours) have been processed during trial operation! For sale is an absolutely like-new, high-end deep-drawing packaging machine, a MULTIVAC R 245, in the extremely rare and hygienic medical version (Clean Design) (pp. 2, 15). The machine was acquired in 2016 for a medical project and was only used for a few test cycles in the sterile cleanroom. It is in absolute factory condition, both mechanically and visually (pp. 1-2). • Manufacturer: MULTIVAC Sepp Haggenmüller SE & Co. KG (p. 1) • Type: R 245 Medical / Clean Design (pp. 2, 15) • Year of manufacture: End of 2016 (pp. 1, 3) • Condition: Like new, unused (New Old Stock), stored in a cleanroom, dust-free • Operating hours: Only approx. 60,000 individual packs (equivalent to approx. 15 cycles) (p. 14) 📦 Technical data & dimensions • Total footprint (L x W x H): approx. 700 cm x 140 cm x 230 cm (incl. discharge belt) • Frame length, base machine: 5,500 mm (divisible frame for easier transport) (p. 6) • Machine nominal width (bottom film): 355 mm (worldwide standard, easily available) (pp. 6, 23) • Top film width: 342 mm (pp. 2, 23) • Infeed path: Comfortable, knee-free infeed path of 1,125 mm (p. 6) • Power supply: 400 V / 50 Hz / 3 phases (p. 8) • ATTENTION: Compressor not included! 🛠️ Tool & format data (4-cavity contour tool) The installed original tool provides highly precise, visually appealing contour packaging (ergonomic oval/drop shape), ideal for premium products (p. 14): • Format configuration: 4 lanes side by side / 1 row (pp. 13-14) • Actual internal form dimension per cavity (L x W): 152 mm x 64 mm (pp. 14, 16) • Package outer dimension (L x W): 185 mm x 82 mm (pp. 14, 23) Nsdpfx Aiezwgxrjyoda • Package depth: 19.5 mm (form plate type 5, directly water-cooled) (pp. 14-15) • Feed / discharge length: 185 mm (pp. 13-14) ✨ Premium features & expensive optional extras (Included!) • Integrated printer: MULTIVAC MR293 HP/TT film direct printing system with a fully integrated MULTIVAC TTO 10 thermal transfer printer (300 dpi) for printing logos, batch numbers and best-before dates directly in the control system (pp. 19-20). • Integrated chiller: Rittal air/water heat exchanger in a stainless steel housing for self-contained tool cooling in a closed circuit (no external water connection required) (pp. 6, 11). • Automated discharge belt: High-quality Intralox discharge belt (800 mm) with blue Intralox chain and separate frequency inverter for synchronous package transfer (p. 12). • Scrap film management: Original MULTIVAC RSW 20 edge strip winder with integrated tear-off control and winding drive for clean film disposal (p. 12). • Gas flushing device (MAP): Gas injection nozzles installed on the tool side for packaging under modified atmosphere. • Control system: Modern 12.1" color touchscreen terminal with HMI 2.0 user interface and IPC 06 control system (Windows Embedded) (pp. 9-10). • Documentation: Operating manual, spare parts catalog, electrical and pneumatic circuit diagrams in German are included (pp. 19-20). 💰 Price € 29,900,- net excluding VAT. • Shipping costs: Available on request throughout Europe • Delivery time: Immediately available • Inspection and collection: Possible at any time by arrangement (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.)

Year of construction: 1986, condition: used, Year of manufacture: 1986 Nedszu Nw Ejpfx Aiyjda Three stations (forming, cutting – with a movable upper table, stacking) for the production of packaging from PVC, PS, PET, and PLA films. Equipped with upper heating elements. MAX. forming area: 500x350 mm Max. forming height/depth: 40/100 mm Max. film width: 550 mm Film thickness: 0.2-0.6 mm Installed power: 23 kW Vacuum pump capacity: 40 m³/h The machine underwent a major overhaul in 2021 and is fully functional. It can be seen in operation near Warsaw. Price: 35,000 EUR

Condition: used, Year of construction: 2014, COMI 1092 Door liner thermoforming machine, Thermoformer HEDL 2000x800x200, Year of Manufacture 2014, Serial Number C1092 Machine Specifications (List View) Forming & Mould Dimensions Maximum inside frame dimensions: 2004 × 804 mm Maximum moulded part height: 150 mm (male mould) / 50 mm (female mould) Maximum mould base dimensions: 2000 × 800 mm Minimum mould base dimensions: 600 × 500 mm Coil width range (min/max): 580 to 900 mm Mechanical Characteristics Lower die holder force: 40,000 kg Machine weight: 20,000 kg (20 tonnes) Machine dimensions: See Drawing LO-029-14-01 Heating System Upper heating power: 168 kW Thermoregulator power: 24.99 kW (3 × 8.33 kW) Motors & Drives Forming motor power: 12 kW Vacuum pump motor power: 7.8 kW De-reel device motor power: 0.37 kW Sheet conveyor motor power: 8.17 kW Transport regulation motor power: 1.1 kW Fan motor power: 3.0 kW (4 × 0.75 kW) Transfer unloading motor power: 3.0 kW (2 × 1.5 kW) Scrap cutting motor power: 2.2 kW Moulded-part unloading belts motor power: 0.5 kW Cooling & Auxiliary Equipment Chiller power: 28.75 kW Auxiliary equipment maximum power: 4.12 kW Electrical Requirements Maximum installed power: 264 kW Ndsdozumwcspfx Aiyja Typical operating power (50% load): 132 kW Pneumatic Requirements Pneumatic operating pressure: 6 bar Air consumption: 2,000 N litres/cycle Water Requirements Water temperature: 25 °C Water pressure: 2 to 3 bar . Fully automatic thermoforming machine designed to shape plastic sheets up to 2000 × 800 mm with a maximum forming depth of 150 mm (200 mm), suitable for high-capacity industrial applications. Thermoformer details: Forming area 2000 × 800 mm Max forming depth 150 (200) mm Heating station – ONLY Upper heater, heater length fully configurable, fulfils pre-heating and heating functions. Pressure and vacuum forming operation. Trimming press. Scrap collection end station. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management.

Condition: used, Year of construction: 2013, Used for the production of inner liners, vacuum forming machine BL 2200x900x600-NG-EL-PF-DX, year of manufacture 2013, serial number C1091, voltage 380V-N-50Hz+PE. Machine Specifications Summary Forming & Sheet Dimensions Maximum inside frame dimensions: 2205 × 905 mm Mould base maximum size: 2200 × 900 mm Mould base minimum size: 700 × 500 mm Maximum sheet size: 2290 × 960 mm Minimum sheet size: 790 × 560 mm Maximum mould height: 850 mm (600 + 250 mm) Maximum formed part height: 600 mm Maximum sheet stack height: 1000 mm Sheet support stack height: 144 mm Electrical Power Requirements Upper heating power: 93.8 kW Lower heating power: 80.3 kW Forming motors: 23.2 kW Sheet conveyor motor: 4.6 kW Transport support regulation motors: 0.6 kW Sheet centering device motors: 0.36 kW Sheet pick-up motors: 3.0 kW Cooling fan motor: 5.5 kW Extraction fan motor: 0.25 kW Unloading transfer motors: 3.0 kW Guillotine group motors: 8.1 kW Conveyor belt motor: 0.75 kW Thermoregulator units: 25.65 kW Chiller unit: 16.25 kW Ancillary equipment maximum consumption: 3.89 kW Maximum installed power: 269 kW Typical operating power (50% load): 135 kW Pneumatic System Forming tank capacity: 2 m³/cycle Pneumatic system pressure: 600 kPa Air consumption (VGS): 0.85 m³/cycle Air consumption (movements): 0.35 m³/cycle Air consumption (cooling): 0.90 m³/cycle Air consumption (pressure forming at 200 kPa): 3.2 m³/cycle Total air consumption: 4.85 m³/cycle Mechanical Characteristics Forming platen closing force: 400,000 N (400 kN) Maximum mould + reduction frame weight: 2,200 kg Machine weight: 30,000 kg (30 tonnes) Water Chiller Unit Chiller tank capacity: 240 litres + piping Water inlet pressure: > 0.1 kPa Water outlet pressure: 0 kPa Water inlet temperature: 20 to 25 °C Utilities Required Electrical supply: 269 kW installed load Compressed air: 600 kPa pressure, 4.85 m³/cycle consumption Cooling water: 20-25 °C inlet temperature Chilled water tank: 240 litres minimum capacity Fully automatic thermoforming machine designed to shape plastic sheets up to 2200 × 900 mm with a maximum forming depth of 600 mm, suitable for high-capacity industrial applications. Thermoformer details: Forming area 2200mm x 900mm Max forming depth 600mm Nedpszumrmefx Aiyeda 3x loading stations. 1 x heating station. - (pre-heating, final heating, upper and lower elements) ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial-grade construction with multiple access doors, observation windows, and integrated ventilation heat management. Applications - High-throughput environments; this COMI machine is ideal for producing refrigerator liners, door panels, containers, and other thermoplastic components where consistent quality, large sheet handling, and repeatable forming cycles are essential.

Year of construction: 1997, operating hours: 30,000 h, condition: used, functionality: fully functional, OVERHAUL in 2022 New reinforced table – 660x960mm No support leg /it is available for mounting, but the program needs to be updated/. It has a new controller and can operate in sheet feeding mode. Price: 80,000 PLN Below are the specifications: Nsdpszt Suksfx Aiyoda Effective forming area 650 x 950mm Table stroke 300 mm Film width Up to 700 mm Installed power 15 kW Heating panel power 13 kW Pneumatic table lifting 0.4 MPa Compressed air consumption 5 m3/h Thickness of forming material 0.15-6mm Performance in cycles per hour 40 - 100 Weight approx. 250kg Dimensions: depth x width x height 1250mm x 2230mm x 2040mm

Year of construction: 2019, condition: ready for operation (used), A horizontal thermoforming, vacuum and packaging machine from Ulma for flexible and rigid film packaging from the food industry is available. Frame length: 4000mm, working height range: 850mm-950mm, max. film width: 420mm, max. film index: 360mm, max. forming depth: 130mm, max. film roll diameter: 350mm, max. film roll core diameter: 76mm, vacuum pump: Busch R5 RA 0302 D, machine dimensions X/Y/Z: approx. 1050mm/5000mm/1950mm. Including rigid and flexible film rolls. Documentation available. An on-site inspection is possible. Nsdpfjzpywrex Aiyjda

Year of construction: 1996, condition: used, Year of manufacture: 1996 Thermoforming, die-cutting for production from PET, PVC, PS, PLA films, etc. Working area: 500 x 740 mm Forming height: 150 mm Maximum film width: 540 mm Njdpfozu Nx Nsx Aiyoda Film thickness: up to 1.5 mm Installed power: 13 kW Busch pump New control system. The machine was overhauled in 2020 and is fully operational; it can be viewed in operation near Warsaw. Price: 23,000 EUR

Year of construction: 1982, condition: ready for operation (used), A vacuum thermoforming machine Adolf Illig with a Busch vacuum pump is available. Form dimensions X/Y: 500mm/350mm, max. forming depth positive/negative: 100mm/100mm, max. mold height: 100mm, vacuum pump: Busch R5. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2600mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Nodpfx Aozqu Eyoiysda

Year of construction: 1990, condition: ready for operation (used), Two identical thermoforming machines DIXIE-UNION DV 2000 are available. Supply voltage: 380V, frequency: 50Hz, rated current: 20A, version with red CEE three-phase plug (3~). Machine 1 was still in operation until 2025. Machine 2 has not been in use for a longer period and is not complete, as relays were removed for spare parts. An on-site inspection is possible, not under power. Ndjdpsylnz Sjfx Aiyoa

Condition: used, Year of construction: 1993, COMI/RIGO 0599 inner liner thermoforming machine, SL200x90 NG DX Machine Specifications Forming & Tool Dimensions Maximum mold base dimensions: 2000 × 900 mm Minimum mold base dimensions: 800 × 480 mm Maximum frame interior dimensions: 2000 × 900 mm Maximum mold height: 800 mm Maximum molded part height: 550 mm Maximum sheet stack height: 1000 mm Ndsdpfjzumuusx Aiyoa Maximum sheet support stack height: 180 mm Heating System Upper heating power: 89 kW Lower heating power: 78 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Motors & Drives Oil pump motor power: 30 kW Vacuum pump motor power: 12 kW (3 × 4 kW) Sheet transport motor power: 1.6 kW Transport regulation motor power: 1.1 kW Sheet moving motor power: 0.25 kW Fan motor power: 0.50 kW (2 × 0.25 kW) Pyrometer motor power: 0.18 kW Discharge transfer motor power: 0.70 kW Single-blade motor power: 5 kW Cooling & Utilities Chiller power: 78 kW Auxiliary equipment maximum consumption: 3.87 kW Electrical Requirements Maximum installed power: 399 kW Vacuum System Vacuum pump capacity: 570 m³/h (3 × 190 m³/h) Vacuum tank capacity: 4,000 L (2,000 + 2,000 L) Water Requirements Water inlet temperature: 12-20 °C Water inlet pressure: 2-3 bar Closed-circuit water maximum flow rate: 130 L/min Pneumatic & Hydraulic Requirements Pneumatic operating pressure: 6 kg/cm² Hydraulic operating pressure (min/max): 110 / 140 kg/cm² Mechanical Characteristics Upper die clamping force: 9,000 kg Lower die clamping force: 9,000 kg Oil quantity for operation: 480 L Air consumption (movement = 700, cooling = 800): 1,500 N litres/cycle Machine weight: 25,000 kg (25 tonnes)

Year of construction: 2002, condition: ready for operation (used), A thermoforming machine A&D with a cooling unit is available. Lower film width: 185mm, upper film width: 175mm. Documentation available. An on-site inspection is possible. Expected to be available from the beginning of 2027. Ndodpsy Igc Uofx Aiysa

Condition: excellent (used), Year of construction: 2017, operating hours: 748 h, functionality: fully functional, machine/vehicle number: 5231847, type of input current: three-phase, total width: 3,988 mm, total length: 4,740 mm, total height: 3,440 mm, input voltage: 400 V, compressed air connection: 6 bar, overall weight: 2,700 kg, Sheet thermoforming machine Machine for processing semi-finished products Maximum sheet size: 1,000 x 700 mm Minimum sheet size: 300 x 210 mm Maximum sheet thickness: 12 mm Minimum sheet thickness: 0.5 mm The machine is fully equipped and prepared for automatic feeding. Features upper and lower tool function, water-cooled molds. Intelligent control via pre-saved material parameters. Ndodpfxjznbp Ts Aiyea The price includes a GEISS horizontal bandsaw HBS 1000.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1126, film width: 540 mm, type of input current: three-phase, total width: 1,710 mm, total length: 3,070 mm, total height: 2,520 mm, overall weight: 838 kg, power: 1.9 kW (2.58 HP), Equipment: type plate available, Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine -Manufacturer: Illig, skin pack machine type SK 74c Ndsdpfxjft Scce Aiyea -Foil width: 540 mm -Roller conveyors: each 1000 x 560 mm maximum -Work table: dimensions see photos -total Motor output: 1.9 kW -total Heating power: 8.9 kW -Dimension: 3070/1710/H2520 mm 838 kg -Accessories: incl. 8 foil rolls Ø290 x 540 mm 276 kg -Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm -Total weight: 1114 kg + 500 kg foil

Condition: used, Year of construction: 2003, Used for the production of door liners by thermoforming. Year of manufacture: 2003 General Maximum roll diameter: 1200 mm Maximum roll width: 850 mm Minimum roll width: 570 mm Sheet loading height: 1750 mm Sheet feeding height: 1750 mm Discharge height of thermoformed product: 1750 mm Machine overall dimensions: See layout drawing Roll Unwinding Station Sheet loading: Manual Roll change: Automatic (pneumatic) Sheet pulling: Motorized Heating Station Format change: Motorized Format change stroke length: 500 mm Oven emptying in emergency: Automatic (pneumatic) Upper panel radiators: 134 × 300 W + 45 × 600 W Upper panel radiator power: 67,200 W Lower panel radiators: 112 × 600 W Lower panel radiator power: 67,200 W Forming Station Ndodpfx Aezumnzeiysa Moving level of the mold holder Maximum stroke of pneumatic cylinders: 750 mm Closing force of pneumatic cylinders: 687.5 daN × 4 Clamping Ring Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders at 6 bar: 735 daN × 2 Pre-Stretching / Cooling Dome for Thermoformed Product Maximum stroke of pneumatic cylinders: 200 mm Closing force of pneumatic cylinders: 687.5 daN × 2 Electric fan power: 0.55 kW × 4 Vacuum System Pump capacity: 240 m³/h × 2 Pump motor power: 5.5 kW × 2 Tank capacity: 1200 L × 2 Pneumatic System Operating pressure: 6 bar (±10%) Air intake connection: Water System Operating pressure: 2.5 bar (±10%) Water intake (flow to chiller, closed-loop connection): DN ½" Temperature: 15°C (±10%) Electrical System Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%) Frequency: 50 Hz Installed power: 280 kW Current: 465 A Roll feed thermoforming machine currently used in the manufacture of refrigerator door liners. Thermoformer comprises: Roll Unwinding Station. Heating Station - Upper and lower pre-heaters and heating elements. Forming Station - Table closing force of daNx2: 735. Clamping Ring. Pre-Stretching / Cooling Dome. Vacuum System. Pneumatic System. Full workshop manuals. Machine footprint of approximately 10m x 3 m x 5m.

Condition: used, Multivac R272 CD Darfresh Thermoforming Packaging Machine The Multivac R272 CD Darfresh (MultiFresh) thermoforming packaging machine is designed for easy and efficient packaging of products in attractive vacuum skin packs (VSP). This packaging technology offers several advantages: Extended product shelf life The product remains securely fixed in place and does not shift during transport Premium product presentation with an attractive appearance The excess film along the sides is removed by two rewind rollers, while small film remnants are extracted by an integrated scrap film suction system. Packaging functions: Vacuum packaging MAP (Modified Atmosphere Packaging) SKIN (Vacuum Skin Packaging) The machine is entirely manufactured from stainless steel. Technical Specifications Production capacity: up to 10 cycles/min (depending on package size, film type, vacuum level, and machine settings) Control system: Multivac PLC with a user-friendly programmable control panel Tooling configuration: one format with a 3.1 layout (142.33 × 250 mm) Film width: 470 mm Index length: 250 mm Loading area length: 1,600 mm Vacuum system: 250 m³/h Busch vacuum pump with a 500 m³/h booster (Roots) pump Water supply pressure: 1–7 bar Compressed air pressure: 6–8 bar Power supply: 400 V (3+N, 50 Hz) Power: 20 kW Weight: 3,000 kg Year of manufacture: 2005 Machine dimensions (W × D × H): 8,200 × 1,100 × 2,200 mm Njdpfx Aijzlgpgeyoda Thermoforming Packaging Process The bottom film is unwound from the roll. The bottom film is heated and formed in the forming station. The formed trays are transported forward. Products are loaded into the trays in the loading area. The top film is unwound from the roll. The filled packages are sealed (vacuum, MAP, or SKIN packaging). The packages are cross-cut. The packages are longitudinally cut. The finished packages are discharged for further processing, such as metal detection and/or labelling. How Vacuum Skin Packaging (SKIN) Works In vacuum skin packaging, the product is placed on a plastic tray. A specially developed skin film is heated and tightly vacuum-sealed around the product, creating a "second skin." This packaging method offers several important benefits: An attractive premium presentation Maximum product shelf life The product remains firmly in position and cannot move within the tray Ideal for upright or hanging retail display

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02 2406, GEISS DU 2400 X 2400 T8 YEAR OF MANUFACTURE: 2002 SERIAL NUMBER: 02 2406 TOTAL POWER CONSUMPTION: 517.9 kW RATED CURRENT: 750 A HEATING POWER INPUT (upper - lower): 462.9 kW RATED VOLTAGE: 230/240 V FREQUENCY: 50 Hz TOTAL WEIGHT: 141.1 kN AIR CONSUMPTION: 3315 liters/cycle AIR CONNECTION: 6 x 10/5 to 8 x 10/5 Pa Nodoyin Ugepfx Aiyoda WATER CONNECTION: min. 1.5 x 10/5 to max. 2.5 x 10/5 Pa A Geiss large-format vacuum thermoforming machine is available. Minimum panel cutting: 1100 mm / 1300 mm, maximum panel cutting: 2100 mm / 1800 mm, maximum forming depth: 620 mm. Additional sheet format 1: min. 850 mm / 750 mm, max. 1850 mm / 1250 mm. Additional sheet format 2: min. 1050 mm / 800 mm, max. 2050 mm / 1300 mm. Includes a separate loading unit with pneumatic panel separation equipment, automatic aligner for longitudinal and crosswise sheet cutting, pneumatic pusher for removing molded parts from the loading table, fully automatic central lubrication system for the loader, and several interchangeable pallets for window panel sets. Documentation available. On-site inspection possible.

Condition: excellent (used), Year of construction: 2018, operating hours: 4,020 h, functionality: fully functional, Make WM Model FC 780 IM2+ Year 2018 Hours approx 4038 Delivery Date Immediately Stations Forming, Cutting and (Down) Stacking Max Tool Size 780 x 570 mm Depth of Draw 130 / 130 mm Max Material Width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Forming pressure 7 bar Maximum cycles-minute 45 Total Connected Load 140 Kw Approx Total Length 11000 mm Approx Width 5000 mm Approx Height 2550 mm Approx Total Weight 11000 kg All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale. Nsdezam Hpspfx Aiyoda

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: 1345, Machine Type: Two-Roll Mixing Mill (Mischwalzwerk) Ndedpsyx Etgjfx Aiysa Main Manufacturer: TROESTER MASCHINENBAU (Sontra, Germany) Year of Construction: 1981 Origin: Made in Germany (West Germany) Heating System: Integrated heating system, equipped with temperature sensors. Main Motor: EMOD (Herbert Odenwald Elektromotorenfabrik KG) Power: 45 kW (60 HP) Protection Class: IP 23 Current/Voltage: 88A / 380V (Delta) / 50Hz Speed (n1): 1465 U/min Gearbox (Transmission): Jahnel Getriebebau GmbH (Bochum) Type: D 450 SO Ratio: 16.4 : 1 Output Speed (n2): 89.3 U/min Oil Specifications: ISO-VG 320 Safety Features: Equipped with built-in temperature sensors for motor protection (Kaltleiter-Temperaturfühler 130°C).

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 202-052, film width: 570 mm, type of input current: three-phase, pressure: 6 bar, total width: 25,800 mm, total length: 82,200 mm, total height: 22,800 mm, Thermoforming machine used,functional for PET,PS,PP. The machine is still in production mode, but is available immediately. Ndedporh E Ibjfx Aiyja

Condition: used, Year of construction: 1990, Name: Used packaging machine (thermoforming system) Manufacturer: Adolf Illig Type: SB 53C - DIN Ndedpsxm Sa Hsfx Aiyoa Year built: 1990 Driving force: 1,24 kW Dimensions: L 1.600 x W 1.135 x H 2.710 mm Empty weight: 500 kg Technical doc.: Yes Message: Heating capacity: 4.5 kW (15 ceramic surface heaters) Vacuum system: Max. vacuum level 0.95 kp/cm2 Formats: Forming area: 405×500 mm Carton size: 400×495 mm Film width: 445 mm Positive drawing depth: 150 mm Negative drawing depth: 150 mm Packaging height: 150 mm Film roll diameter: 400 mm (blister) Film roll diameter: 350 mm (skin) Film roll core diameter: 70 mm Condition: Second hand Price: By request

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) Ndsdjxxb Rrjpfx Aiyja (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Manufacturer GN Model 3021C Year 2002 Condition Used Stock Number 00044 Ndjdpfx Aijziw R Neysa Max forming area 760 x 530 mm Max depth of draw 125 mm Cutting Length - APET 3810mm Cutting Length - All other materials 6350mm Max Sheet Width 815mm Sheet thickness range 0.15 - 1.0mm Max dry cycles / min 30 Minimum Air Pressure 6.8 bar Approx Weight 3636kg Including Premier Automation Robot Stacking Notes All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, total width: 17,500 mm, total length: 68,000 mm, total height: 19,000 mm, overall weight: 5,500 kg, Universal and highly successful blister machine in the medium to high-speed category with intermittent platen sealing. Format range: max. forming film width: 300 mm max. web indexing ET: 280 mm max. web indexing MT: 97 mm max. punching width: 284 mm max. drawing depth: 10 mm for PVC / Materials: Forming PVC/PVDC/ACLAR Included in the price are the following configurations of the machine: Ndedpfor Nv Icox Aiyea - Numatic valves - Forming film unwind stand - Forming film buffer - Stock monitoring for forming material - Forming foil unwind - forming station for PVC foil - Splice detection for forming film - Heat monitoring control for heating and sealing stations - Parts for heat fume extraction without exhaust unit - Forming station without plug assist - ET Index station after forming - Fill Section with rotary brush and safety flap - Electrical preparation for SimTap 2i feeding system - Fill control inspection system VisioChrom-CV - Lid foil unwind - Stock monitoring for lidding material - Print registration via elongation (stretching device) of lid material. - Splice detection for lidding material with 2 sensors for inside and outside - Sealing station - Cooling station after sealing - Index after sealing - Embossing station -MT index station - Punch station - cross blister outfeed Output: max. 600 blisters Index: max.280x284 mm Forming depth: max.10 mm