Used Gbw 22 P for sale (47,232)

Year of construction: 2023, condition: new, Continuous power: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Kdjdpfxomw Ui Rs Ab Hjr Generator type: IP21 protection class, MeccALte Starting mode: electric Generator with AVR control Dimensions and weight: Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg

Condition: new, Continuous power: 20.12 kVA / 16.10 kW Ksdpfxeq A T Eus Ab Hsdr Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Generator type: Protection class IP21, MeccALte Start type: electric Generator with AVR control Dimensions and weight: Length (mm):1645 Width (mm):870 Height (mm):1072 Weight, dry: 640 kg Key start Sockets: 1 x 32 A 400 V 1 x 16 A - 400 V 1 x 230 V Schuko 2 x 16 A 230 V CEE

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: Pramac GBW 22 P DDS Noise protection hood: 66 dB(A) 7m Continuous 3-phase power: 20.12 kVA / 16.10 kW Kdjdpeq A T Dwjfx Ab Her Maximum 3-phase power: 22 kVA / 17.6 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel engine: Perkins 404J-22G Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 2220 cm³ Intake: Normal Engine speed: 1500 rpm Engine control: Mechanical Consumption at 3/4 load: 4.0 liters Consumption at full load: 5.74 l/h Fuel tank capacity: 51 l Generator: MeccAlte ECP28-M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Digital control ACP Sockets with FI: 1x 32A - 400V / 5-pole Dimensions and weight: Length: 1645 mm Width: 870 mm Height: 1060 mm Tank capacity: 51 liters Weight, dry: approx. 546 kg Central crane loading eye Forklift can be driven under Glow pins Engine preheating PHS Battery charge retention

Condition: used, Year of construction: 1986, used, good condition, low hours Brand: Weinig Model: P22N Year of manufacture: 1986 Machine no.: 226-670 Number of spindles: 4 Spindle arrangement: bottom - right - left - top Motor power kW: 4.0 - 7.5 4.0 Motor brakes Planing width approx. mm: 220 Planing height approx. mm: 120 Spindle diameter mm: 40 Table length approx. mm: 2,000 Pre-cutter Cardan feed Lateral pressure rollers Protective hood Infeed before the jointer Infinitely variable feed speed 4 - 20 m/min Profiling Sliding rollers: 1 piece Electric adjustment: thicknessing shaft Digital displays: width-height Extraction connection mm: 120/120/120/140 Space requirement approx. 3600 x 1400 x 1400 mm Kdsdpfjy Apfzsx Ab Hjr Weight approx. 1,500 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition, as inspected, without any warranty or guarantee

Condition: excellent (used), Year of construction: 2017, Dust extraction blower, extraction, extraction system, dust extraction device, cyclone separator, cyclone, separator, dust separator, centrifugal separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system, cartridge dust extraction system, cartridge filter device, cartridge filter -Condition: unused, without extraction fan -Manufacturer: INFASTAUB, filter system cartridge filter with pneumatic filter cleaning -Type: AJV 800-980-22 P -Cyclone separator: made of stainless steel -Inlet opening: Ø 110 mm -Outlet opening: pneumatic shut-off valve Ø 300 mm -Dimensions: 1730/1730/H5500 mm -Quantity: 2 pieces available Kdsdpfx Aeytgrxob Hjr Price: per piece -Transport dimensions: 4 loading meters, height 1730 mm -Weight: 1120 kg

Condition: used, machine/vehicle number: 008021, Max. panel width: 4300 mm Max. panel length: 2200 mm Kedpfxjy Nkygs Ab Hodr Main saw blade projection: 125 mm No of Grippers: 11 Panel Rotation Station: yes Thin sheet loading: yes Vacuum sheet loading: yes

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm Ksdpfx Abozf Nn Ej Hsdr y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: Pramac GWB 22 Y CDS Noise protection hood: 64 dB(A) 7m Continuous power: 18.4 kVA / 14.45 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Phases: 3 Diesel engine: Yanmar 4TNV88 BIPGE Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 2190 cm³ Intake: Normal Engine speed: 1500 rpm Engine control: Mechanical Electric start Consumption at 3/4 load: 3.87 liters Consumption at full load: 5.17 l/h Generator: MeccAlte ECP28-M/4 or equivalent Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Manual control panel: Key start Voltmeter, ammeter, operating hours counter, Motor fault display Sockets: 1 x Schuko 220V 2 x CEE 16A -230V 1 x CEE 16A -400V 1 x CEE 32A -400V Dimensions: Length: 1645 mm Width: 870 mm Height: 1072 mm Tank capacity: 51 liters Weight: approx. 560 kg Crane eye Forklift can be driven under Kjdpfx Asq A U Axeb Hsdr

Condition: used, Year of construction: 2016, operating hours: 4,248 h, machine/vehicle number: CAI955518, Technical Data: - Operating hours: 4248 h - Load hours: 1978 h - Operating pressure: 10 bar - Free air delivery: 3.34 m³/min - Drive: 400 V / 22 kW - Motor speed: 3000 rpm - Required space approx.: W 1300 x H 1250 x D 800 mm Kdodpfeycg Hhsx Ab Hjr - Weight approx.: 490 kg

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Ksdpfjzilz Nox Ab Hjdr Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-256-73-1249, working width: 1,350 mm, grinding belt length: 2,150 mm, workpiece height (max.): 160 mm, grinding belt width: 1,370 mm, volume flow: 3,660 m³/h, TECHNICAL DETAILS Working width: 1,350 mm Workpiece thickness: min. 3 mm / max. 160 mm Sanding belt width: 1,370 mm Sanding belt length: 2,150 mm Unit 1 – Contact cylinder Sanding belt cutting speed: 18 m/s Rubber cylinder: 65° Cylinder diameter: 240 mm Combination sanding unit Sanding belt speed: 12 m/min Rubber cylinder: 55° Shore Cylinder diameter: 140 mm Kedpfx Aszvnfweb Hjdr Width of pneumatic foot: 80 mm MACHINE DETAILS Voltage: 400 V / 50 Hz Drive power Unit 1: 15 kW Drive power Unit 2: 15 kW Total power consumption: 33 kW Dust extraction connection Unit 1: Ø 180 mm Dust extraction connection Unit 2: Ø 180 mm Dust extraction volume: 3,660 m³/h Recommended dust extraction speed: 20 m/s Compressed air requirement: 20 l/min at 6 bar EQUIPMENT Sanding belt change on the left side Automatic clamping of the contact cylinder, e.g., during belt change Automatically adjustable rubber cylinder Grain size compensation on the contact cylinder Combination sanding unit L with pneumatic foot for calibration Automatic anchoring/fastening Grain size compensation on the rubber cylinder Automatically adjustable pneumatic foot

Condition: excellent (used), Year of construction: 2003, I sell the panel beam saw HOLZMA HPL11/43/22. Year 2003. Cutting size 4300x2200mm + back loading table. Cutting height 125mm. Kjdpfszkb T Djx Ab Hjdr Total area covered W.7060mm x D.9490mm 7 pcs. gripper with pneumatic regulation Side alignment bottom pad with pneumatic stroke. CE conformity and optimising software included. Very good condition. Available immediately.

Condition: good (used), Year of construction: 1998, functionality: fully functional, The machine can fill still drinks, water, juices, wine and carbonated drinks Kdodpfx Abjvtgaxj Hjr The machine is isobaric

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Kdodjv Nv Taepfx Ab Hjr Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: used, Year of construction: 2022, PANEL SAW Manufacturer: HOMAG Type: SAWTEQ B-200 Optimat HPL200/38/22 Year: 2022 Kdsdpfszkmrfsx Ab Her With loading system

Condition: good (used), Year of construction: 2008, Year of manufacture: 2008 Technical specifications: • Max. size: 330 x 250 mm • Min. size: 200 x 148 mm • Max. trimmed size: 330 x 250 mm • Max. trimmed size without lap: 340 x 260 mm • Booklet thickness: 4–6 mm • Mechanical speed: max. 22,000 cycles/hour Kdjdpfx Abozbulvj Her Equipment: Feeding & gathering: - 2 bundle clamps - 6 stations gathering chain - 5 feeders 416 - 5 Stream feeders 3738 with extensions - 1 Semko - 3 ELTEX static control devices Stitching unit: - Type 410 - 2 stitching heads Trimming: - Three-knife trimmer 304 Controls: Signature reading system (ASIR) Option not included in the price - Extra feeders - Stream feeders - Card gluers 423 - Inserter - stackers CONDITION OF THE MACHINE, cleaned, good working condition

Condition: good (used), Year of construction: 2015, C 22 U + IH 30 handling system + ZM 192 additional magazine Machine parameters: Travel in X, Y, Z axes: 450, 600, 330 mm Max. spindle speed: 18000 HSK-A63 rpm Description: The machine is in good technical condition, test operation is possible by prior arrangement. Equipped with Hardware KinematicOpt, centre cooling 80 bar, BLUM LC 50 TL200, Renishaw TNC 640. Original price was approx. €570,000. Comprehensive specification of supplied components and options available – will be provided upon request. Kjdpjy Rgfzefx Ab Hjdr

Condition: excellent (used), Year of construction: 1987, Four-side planer Manufacturer: Weinig Model: Profimat 22 N Year of manufacture: 1987 Planing height: 220 mm Planing width: 120 mm Number of spindles: 4 Feed speed: 5 – 22 m/min, infinitely variable Total power: approx. 17 kW Spindle speed: 6,000 rpm - First spindle: bottom, 4 kW, tool diameter: 125 mm - Second spindle: right, 5.5 kW, tool diameter: 180 mm - Third spindle: left, 5.5 kW, tool diameter: 190 mm Kdsdpfxoww A T Uj Ab Hjr - Fourth spindle: top, 4 kW, tool diameter: 200 mm

Condition: excellent (used), functionality: fully functional, Working width: 220 mm Working height: 120 mm Number of spindles: 5 Spindle arrangement: bottom / right / left / top / bottom Motors: 7.5 KW, 11 KW, 11 KW, 11 KW, 7.5 KW Table lubrication Feed drive: 2.2 KW Electrically adjustable pressure beam Electrically adjustable left spindle Feed speed: 6/22 m/min Year of production: 1993 Machine dimensions: - Length: 4400 mm - Width: 1700 mm - Height: 1250 mm Kdodpfjy N Rbkjx Ab Hor

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 03814V2200, functionality: fully functional, operating hours: 2,416 h, input voltage: 380 V, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, number of slots in tool magazine: 1, total height: 2,400 mm, total length: 3,000 mm, total width: 1,200 mm, overall weight: 1,100 kg, table length: 2,200 mm, table width: 280 mm, coolant supply: 3 bar, feed length X-axis: 2,200 mm, feed length Y-axis: 1,200 mm, feed length Z-axis: 280 mm, feed rate X-axis: 7 m/min, feed rate Y-axis: 7 m/min, feed rate Z-axis: 6 m/min, spindle motor power: 4,500 W, number of spindles: 1, rapid traverse Z-axis: 6 m/min, rapid traverse X-axis: 7 m/min, rapid traverse Y-axis: 7 m/min, rotational speed (max.): 18,000 rpm, rotational speed (min.): 1,000 rpm, spindle speed (max.): 18,000 rpm, spindle speed (min.): 1,000 rpm, table height: 1,200 mm, Equipment: rotational speed infinitely variable, NUMERICALLY CONTROLLED PANTOGRAPH WITH VERTICAL PLANE MODEL "VERTICAL 2200 OPEN" WITH 3 INTERPOLATED AXES FOR WORKING MARBLE AND GRANITE basic assembly: - range: x-axis=2200 mm. y-axis=1200 mm. z-axis=300 mm; - work surface L. 2500 x H. 1250 mm; - heavy carpentry-made structure in processed and painted steel; - Side openings with loops, both on the left and on the right, for processing oversized blocks with support rolls; - slabs and carter support in inox steel; - highly deep workbench made with extruded aluminium profile ; - slab locking with n°2 clamps with mechanical blocking device; - three-phase electro spindle hp 5 1/2 gas connection with perforated shaft and rotating joint for water passage for internal and external tool refrigeration, and inverter for variation to maximum 18000 r.p.m .; - openable polycarbonate protection for electro-mandrel, with safety micro; - axes movement by means of runners and sliding blocks of balls recircle; - dust tents for total protection of all moving parts; - water cooling tool system with centralized drain, including pump, decanting tanks and locking electrovalve; - electronic panel with console comprising numeric control, pc and monitor. Windows software included ARTCAM INSIGNA: - carrying out of reliefed and engraved writing, using all "true Type" fonts; - cad for carrying out drillings, cuts, engravings, millings and inlays; Ksdpfoygxc Ajx Ab Hodr - import of most common types of files as dxf and dwg to create writings, drawings and stamps, reliefed and engraved logos, showr trays, sinks, arcs and portals; - automatic drilling for inserting bronze letters; - carrying out single and multiple sculptures in high and bas-relief; automatic switch off; 3D PLAN LASER laser copyng system to import manufactured products and tree-dimansional figures (bas and hight - relief) with interface and software for required dimensions

Condition: good (used), Year of construction: 2019, pressure 220 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 300 mm dayligth 570 mm working feed 21.0 mm/sec return speed 200.0 mm/sec work height max. 970 mm Control PPS-TS Touch total power requirement 37.0 kW Kdsdpfx Aszu A Rxeb Hjr weight 27500 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Special price upon request Equipment: - CNC electro-hydraulic press brakes * Intuitive, touchscreen-based user interface * Easy navigation * Tool and program library * Control system

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Working width: 1350 mm Abrasive belt width: 1350–1380 mm Abrasive belt length: 2150 mm 1 contact roller unit Ksdpfxezumywe Ab Hodr 1 combined sanding unit EPS 52 – Segmented electro-pneumatic pressure shoe. Constant workpiece inlet height: 900 mm. Abrasive belt drive with wear-free system. Abrasive belt blowing device Machine safety stop in case of improper use 7" graphic touch-screen display Conveyor belt feed with: adjustable feed speed via inverter, from 3 to 15 m/min. Infeed roller table, 250 mm wide, with rubber-coated rollers. Total installed power: approximately 33 kW Weight: approximately 4,000 kg Includes infeed and outfeed conveyors Few operating hours, used for approximately 3 years

Condition: used, mileage: 1,047 km, gearing type: other, fuel type: electric, color: red, overall weight: 1,330 kg, empty load weight: 700 kg, maximum load weight: 150 kg, number of seats: 1, first registration: 11/2015, emission class: none, suspension: other, Year of construction: 2015, operating hours: 1,047 h, driver cabin: other, fuel: electricity, The used Linde P 60 Z tractor from 2015 is a reliable electric three-wheel tractor. The vehicle has an operating mileage of 1,047 km and hours and is therefore in good condition. The red color is standard and the tractor has space for one person. It is a vehicle with a permissible total weight of 1,330 kg. A key feature of this tractor is the 48V battery of type 3 EPZV 300, although the charger is sold separately. The tractor is particularly suitable for commercial users such as agricultural companies, freelancers and businesses and is priced in the range of used vehicles. It is possible to have the tractor delivered within Germany for an additional charge. For interested parties, the Linde P 60 Z tractor is available for viewing without registration - from Monday to Friday between 8:00 a.m. and 5:00 p.m. and Saturdays from 9:00 a.m. to 2:00 p.m. Only sold to businesses (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale. Kedpfx Aer Uziqob Hsdr

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function Kjdpfxezkttce Ab Hedr 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Kjdpfsx Aqdcsx Ab Hedr Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder