Used Ghiringhelli Apg-M/Cnc 6A for sale (74,195)

Condition: used, Centerless grinder cnc GHIRINGHELLI APG-M/CNC 6A Hjdjz I Uyispfx Akronu

Condition: excellent (used), Control SIEMENS 840D Hnedpoyrhl Refx Akrou

Condition: ready for operation (used), Year of construction: 1993, number of axes: 3, This 3-axis GHIRINGHELLI M300SP610 CNC3A was manufactured in 1993. It features a grinding wheel diameter of 610 mm and a maximum wheel speed of 35 m/s. The machine is equipped with an automatic loading and unloading system, enhancing productivity. If you are looking to get high-quality centerless grinding capabilities, consider the GHIRINGHELLI M300SP610 CNC3A machine we have for sale. Contact us for further details. • Installed Power: 54 kW Hnsdpfxsy S A T Ds Akrsu • Grinding Wheel Diameter: 610 mm • Max Wheel Speed: 35 m/s • Precision Correction Capability: 0.5 micron • Machine Configuration: Converted from plunge grinding to through-feed grinding • Automatic loading system with elevators • Automatic unloading system SIRIO • Piece conveyor around machine back to loading zone • Full mechanical overhaul: 2009 / 2010 • Guideways revised: 2018 • V-axis screw replaced: 2021 • Electrical Data: • Voltage: 380 V • Frequency: 50 Hz • Auxiliary Circuits: 110V / 24V • Line Current: 100 A • Coolant: • No standalone coolant filtration tank included • Connected to seller centralized coolant system • Currently operational • Main machine mass: 10200 kg • Electrical cabinet mass: 470 kg • Very good condition

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 4 h, input frequency: 50 Hz, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, actuation type: electric, overall weight: 250 kg, Equipment: documentation/manual, We offer this like-new CNC-Technik ALM-1204-002 machining center, manufactured in 2022. Working area: 1,250 x 1,000 x 180 mm Country of origin: Germany Tangential unit preparation for the AL-M series Electronics upgrade with a 4th motor driver for controlling the tangential module or rotary axis Inductive tool length sensor AMB 1400 FME-P Technical specifications: Input power: 1,400 W Rotation speed: 5,000 ... 25,000 rpm Mounting to the portal: 43 mm mounting flange Collet: ER16 Weight: 1.80 kg Power connection: 4 m power cable Set of 3 ER-16 collets Collet dimensions: Vacuum table milled into the plate Grid spacing 20 mm Includes M6 threaded holes in the grid Hnedpfxszfwavo Akrju Vacuum pump TOPAS E101 V 2.2 kW (set) Oil-lubricated rotary vane vacuum pump DS motor, 2.2 kW 230/400 V 50 Hz IE3 Motor version with PTC (standard) Nominal pumping capacity 100 m³/h Ultimate vacuum 0.5 mbar (abs.) without gas ballast 1.5 mbar (abs.) with gas ballast Includes suction filter 1 1/4" and paper filter cartridge Flow rate 84 m³/h The drive operates on 180-watt servo motors and 16 mm ball screws. With this configuration, the maximum speed, depending on the spindle pitch and software, is 500 mm per second. The control system operates with ground and hardened roller guides featuring a gothic profile. If you have any questions or require further information, please write or call us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 7,810 h, input current: 43 A, input frequency: 50 Hz, type of input current: three-phase, workpiece weight (max.): 2,804 kg, number of axes: 3, number of slots in tool magazine: 6, actuation type: electric, overall weight: 2,804 kg, number of tool turrets: 31, Equipment: CE marking, documentation/manual, type plate available, For sale is a Morbidelli Drilling Center with low operating hours – the machine is connected and ready for trials and tests. MORBIDELLI CX210 CNC Drilling Center R00169 MORBIDELLI CX210 TECHNICAL DATA Min./max. workpiece length mm 200/3,050 Min./max. workpiece width mm 50/1,300 Min./max. workpiece thickness mm 8/95 Max. traverse rate in the X-axis m/min 40 Hnjdpjzdfhajfx Akreu Max. workpiece weight kg 70 Max. traverse rates in the X-Y-Z axes m/min 70-40-30 F31LTC DRILLING HEAD Number of vertical spindles pcs. 21 Number of horizontal spindles in the X-axis pcs. 6 Number of horizontal spindles in the Y-axis pcs. 4 Motor power kW 2.2 Spindle speed rpm 4,500 (option 3,000 – 8,000) Fixed integrated saw in the X-axis, diameter mm 125 Max. saw blade thickness mm 6 Saw blade speed rpm 5,500 (option 3,600 – 9,700) INSTALLATION Compressed air consumption Nl/cycle 80 Dust extraction air requirement m3/h 3,300 Dust extraction air velocity m/s 25 Dust extraction nozzle diameters mm 200 + 80 Electrical protection kVA 19 Key advantages: -HSK63F milling head 6.6KW -Cutting saw -31 L drilling head -Infeed and work roller table -2 clamps instead of 1 pc. Speed 70 m/min Spindle + 6-position magazine

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm Hjdey Sub Hjpfx Akrjnu • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: new, Year of construction: 2026, Working area: X - 2100mm, Y - 3000mm Z axis clearance: 300mm Worktable type: hybrid, i.e. vacuum + mechanical rails Number of vacuum sections: 6 Maximum working speed in slow motion: up to 40m/min Maximum Working speed: up to 25m/min Program resolution: 0.01mm Mechanical resolution: 0.04mm 9kW electrospindle, 24,000 rpm with full ceramic bearings Becker VTLF 2.250 vacuum pump Drive: Full Leadshine AC servo drives with 1500W power and high holding torque (double on the Y axis) Drive transmission: High-precision NIDEC SHIMPO planetary reducers Drive system: 30mm PMI linear guides and carriages with helical inclined strips with maximum contact area Guide lubrication system: Automatic Tool length measurement system: Automatic Control system: NK-105 G3 controller Standard CAD/CAM software: Artcam Open 2016 Optional CAD/CAM software: Vectric Cut 2D PRO (Ramp access function, automatic nesting) - additional cost PLN 2,000 net Power supply: 3PH, 400V, 50-60Hz Fire-rated wiring, bendable and protected against deformation Machine dimensions: 4835 x 2900 x 2205mm Hnedpfx Akjzr D Nwsrsu

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, total height: 1,900 mm, total width: 1,500 mm, overall weight: 1,200 kg, spindle speed (max.): 6,300 rpm, product length (max.): 1,600 mm, number of axes: 3, This 3-axis MACMON M 454 V CNC was manufactured in 1998. It features an X-axis travel of 400 mm, Y-axis travel of 250 mm, and Z-axis travel of 400 mm. The machine is equipped with a spindle speed of 6300 rpm and a hydraulic tool clamping system. If you are looking to get high-quality machining capabilities, consider the MACMON M 454 V CNC vertical machining centre we have for sale. Contact us for further details. • Tool Clamping: Hydraulic • Measuring System: Linear glass scales on all axes • Voltage / Operating Voltage: 380 V • Frequency: 50 Hz • Control Voltage: 24 V • Connected Load / Power: 11 kW • Nominal Current: 23 A • Dimensions (L x W x H): 1600 mm x 1500 mm x 1900 mm - Weight: 1200 kg • Optional Equipment (Not included) - WNT vise (HDG2 125) - 20x SK tool holders in various designs (ER and Weldon) in very good condition - Storage box/rack for tool holders Hnsdpoz Nhu Rofx Akrju

Condition: used, Year of construction: 2011, Offer: High-Precision and Versatile Punching/Nibbling Machine Boschert Compact 500 CNC Z (Year 2011) – Ideal for Flexible Sheet Metal Processing! We are selling a powerful and reliable punching/nibbling machine from the renowned manufacturer Boschert, which impresses with its advanced features and precision. This machine is the ideal solution for a wide range of punching and nibbling tasks, from one-off pieces to large-scale production. Key Features: • Manufacturer: Boschert • Model: Compact 500 500 x 1000 CNC Z • Year of manufacture: 2011 • Intuitive CNC Control: Multi-axis Ladob controller with graphical user interface for easy programming and visualization of machining processes. • Extended work area for greater flexibility: o X-axis: 0–2000 mm (enables processing of long workpieces) Hodpfxox Uxtfj Akronu o Y-axis: 0–750 mm (offers ample space for wide sheet metal) • Ultra-fast tool change: Trumpf quick-change tool system ensures minimal downtime and maximum productivity. • Universal tool compatibility: Compatible with the full range of Trumpf tools – reduce your tooling costs and expand your capabilities. • Secure and precise material handling: o Collet clamping: Ensures a firm grip of the workpiece during processing. o Non-contact repositioning up to 9999 mm: High-precision repositioning device with 2 sheet holders for efficient processing of even very long sheets without loss of position. • Dynamics and precision at their best: o Maximum positioning speed: 60 m/min for fast processing cycles. o Infinitely variable feed rates: Optimal adjustment of processing speed to the material and task. o Highest positioning accuracy: ± 0.05 mm for precise results on every workpiece. • Robust and durable construction: o Y-axis drive: Two ball screw-driven carriages located left and right beside the machine table ensure maximum stability and torsional stiffness. o X-axis drive: Ball screw and four recirculating ball guides guarantee precise and smooth movement. • Specialized equipment for small parts: Stop plate (L-bracket) for secure processing of small parts that can no longer be safely held by the collets – for maximum flexibility and minimal scrap. Condition: The machine is in very good, well-maintained condition and has been serviced regularly. It is immediately ready for operation and offers excellent performance for your sheet metal processing needs.

Condition: used, Year of construction: 2009, operating hours: 7,860 h, functionality: fully functional, total length: 2,160 mm, total width: 1,110 mm, total height: 1,600 mm, overall weight: 2,600 kg, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, We offer this used Officine Monzesi Monza 410, manufactured in 2009. MONZESI Monza 410 CNC 1 centerless grinder High-precision machine in excellent working condition, available for inspection under power. Ideal for high-volume precision grinding (automotive, medical, aerospace, or micro-technical components). The original configuration of this machine made it possible to perform micrometer-precision machining of highly sensitive parts (sapphire disks). 🛠️ Key Technical Specifications • Workpiece capacity (external diameter): From 3 to 100 mm. • Maximum plunging/traverse length: 200 mm • Grinding wheel: Max. external Ø 406 mm | Max. standard width 200 mm | Motor power 15 kW (1560 rpm). • Drive wheel: Max. external Ø 254 mm | Max. standard width 200 mm | Brushless servomotor 3.9 kW, variable speed (5 to 285 rpm). • X-axis (Slide Feed): Satellite roller screw (Ø 32 mm, pitch 5 mm) driven by a 6 Nm digital servomotor with a direct optical scale for absolute micrometer precision (programmable minimum increment of 0.0005 mm). 💻 Numerical Control & Automation • CNC: FANUC Power Mate iD digital with Fanuc motors and actuators. • Operator interface: Color touchscreen with graphical pages designed for quick and easy operation. • Electronic precision: Programmable minimum increment of 0.0001 mm. • CNC advantages: Absolute encoders (pulse coders) eliminating the need for referencing at start-up, statistical management of the X-axis with programmable automatic compensation for grinding wheel wear. 📦 Included Accessories and Peripherals The machine is sold with its original equipment and essential workshop accessories: • Oil mist extraction: AR FILTRAZIONI model ARNO 1 VF system (max. flow rate 1500 m³/h) for pollution control in the work area. • Mechanical equipment: Blade holder for in-line operation, grinding wheel holder (Ø 203 mm), drive wheel holder, and static balancing devices and pivots for the grinding wheels. • Safety & Ergonomics: Full sliding protective enclosure compliant with CE standards, secured by automatic locking during wheel rotation, and equipped with internal lighting. • Complete original documentation: Installation, operation, and maintenance manuals, parts catalog, and complete electrical/hydraulic/pneumatic diagrams. (Note: Machine sold without its original fabric filter unit). 📝 Sales Terms & Logistics Hsdpez Ernljfx Akrjnu • Year of manufacture: 2008. • Condition: Very good condition, regular geometric cycles. • Inspection: Machine available for inspection in working condition and under power for testing. • Removal: Lifting, handling, loading onto a truck, and transportation are the sole responsibility of the buyer. (Provide lifting equipment suitable for the weight of the machine base: 2,600 kg excluding the electrical cabinet). • Price: CHF 30,000 (excluding VAT). Manufacturer: Officine Monzesi Model: Monza 410 Year of manufacture: 2009 Condition: Used Category ID: 26 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: refurbished (used), Centreless grinding machine GHIRINGHELLI M2200 CNC 5 axes grinding wheel 200x610 CNC FANUC 5 AXIS Variable speed drive on grinding wheel complete overhaul with electric / electronic retrofit Machine in our warehouse in Gussago BS Mimu machine tools (Italy) Hnodowq Dn Tjpfx Akreu Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc. During centerless plunge grinding, the workpiece is ground in one pass thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece to work which is given to them with the aid of a tool. The through-feed grinding or also through grinding and longitudinal grinding: pieces to be worked proceed uninterruptedly with axial feed through the rectification gap. Grinding wheel width: 200 Grinding wheel diameter: 610 CNC: 4 axes

Condition: reconditioned (used), Year of construction: 2012, Johnford SV-48H “Super Vertical” CNC Vertical Machining Centre Specification: Model: SV-48H Manufactured In June 2012 Heidenhain iTNC 530 CNC Control Maximum spindle speed: 6,000 rpm Machine Weight: 10,000 kg, stated on the plate Electrical supply: Three-phase, 415 V, 50 Hz Full-load current: 76 A Compressed-air pressure: 5–7 bar X-axis travel: 1,220 mm Y-axis travel: 710 mm Z-axis travel: 630 mm Table size: 1,300 × 700 mm Maximum table load: 1,500 kg Spindle nose to table: 100–730 mm Spindle centre to column: 740 mm Hjdpfx Asz N H Enokrenu Spindle taper: BT50 Spindle motor: 11 kW continuous / 15 kW at 30-minute rating Spindle transmission: High/low gearbox Rapid traverse, X / Y / Z: 24 / 24 / 24 m/min Cutting feed rate: 1–12,000 mm/min Tool magazine: 24 Station Arm type ATC Maximum tool length: 400 mm Maximum tool weight: 15 kg For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #MAN001 Machine Serial Number: VBD12242 Cost: £24,950+ VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Hedpfx Akszi Awhersnu Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, total length: 11,850 mm, total height: 4,016 mm, input voltage: 400 V, total width: 3,250 mm, Equipment: documentation/manual, The machine can be inspected during production. Hedozvattspfx Akronu A spare spindle worth €10,000.00 and a computer with software worth €3,000.00 will be supplied.

Condition: ready for operation (used), Year of construction: 1989, • Gear grinding machine NILES ZSTZ 08 CNC • CNC: Fanuc 180i-M • Minimum/maximum module: 2/14 • Maximum grinding diameter: 800 mm • Maximum grinding diameter without tailstock: 1000 mm • Minimum grinding diameter: 50 mm • Grinding wheel speed: 2450 rpm • Maximum helix angle: 45° • Rotary table diameter: 630 mm Hnedpfxezk Hfrj Akrou A set of change gears is available.

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Hsdpfx Ajxab T Ajkrenu Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E

Condition: used, Year of construction: 2015, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of axes: 4, number of slots in tool magazine: 16, Equipment: CE marking, For sale is a well-equipped CNC machining center, FORMAT-4 profit H10 22.32, manufactured in 2015. This machine is perfectly suited for precise processing of wood, MDF, plastics, and sheet materials. The FORMAT-4 H10 stands out for its high traverse speeds and robust construction. Particularly noteworthy are the powerful 10 kW HSK-F63 milling spindle, the 360° C-axis, and a total of 16 tool positions. Technical Data * Manufacturer: FORMAT-4 * Model: profit H10 22.32 * Year of manufacture: 2015 * Type: CNC machining center Working Area * X axis: 3,120 mm * Y axis: 2,160 mm * Z axis: 105 mm Traverse Paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse Speed * X/Y: 100 m/min * Z: 30 m/min Milling Spindle * 10 kW HSK-F63 milling spindle * Speed range: 1,000 – 24,000 rpm Hnjdpfx Asy Smi Aekrsu * Clockwise/counterclockwise rotation * Ceramic bearings * Air-cooled Tool Changer * 2 tool changers with a total of 16 tool positions * HSK-F63 interface * Tool slots on the machine frame and mounted laterally Additional Units * C-axis 0–360° Vacuum/Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two rows of stops Control/Software * FORMAT-4 H10 control system * WoodFlash software * DXF import * 3D graphic display * Parametric programming * Tool database for up to 500 tools * Mobile operator console * Handheld terminal Additional Equipment * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for drilling head * Operator tools and documentation included Condition: Machine from ongoing production. Well-maintained condition. Inspection by appointment possible.

Condition: new, Spare parts category: safety mat for CNC Allen Bradley Lignum 1600x 800 Brand: safety mat for CNC Allen Bradley Lignum 1600x 800 Model: safety mat for CNC Allen Bradley Lignum 1600x 800 Description: safety mat for CNC Allen Bradley Lignum 1600x 800 Allen Bradley Lignum CNC safety mat new, thickness: [value missing] series: 440-F, range: MatGuard, length: 1.5m, width: 1m, thickness: 16mm, Plastisol vinyl, IP67 Allen Bradley protective mat, length 1.5 m, width 1 m - 440F-M2030BYNN The Allen Bradley series MatGuard safety mat from Rockwell Automation is a safety device that detects human presence in hazardous areas. It can be connected to the control circuits of industrial machinery in hazardous environments, creating a protected area of 1.5 m (length) x 1 m (width). When the mat's detection surface senses a person, it sends a signal that shuts down the machine, preventing injury and increasing workplace safety. The durable vinyl material is resistant to bleach, acids, and other industrial chemicals, making it a suitable choice for use in demanding industrial settings. This mat is commonly used to restrict access to hazardous areas in factories. Features and advantages: • Hardened sheet steel construction increases durability. • 4-wire open and short-circuit detection system for enhanced electrical safety. • Can withstand a high static pressure of 4,500 psi (pounds per square inch) for use in heavy-duty applications. Standards and certifications: • CSA (Canadian Standards Association) • ISO13849-1 (International Organization for Standardization) • IEC/EN60204-1 (International Electrotechnical Commission) • TÜV (Technischer Überwachungsverein) Is this mat safe to use in damp or wet areas? IP67 rating CE certified TUV certified CSA certified cULus approved EN1760-1 EN954-1 Hjdpfsz Eggvox Akronu ISO 13849-1 IEC/EN60204-1 ANSI RIA R15.06 ANSI/B11.19 AS4024.5 The mat is rated IP67 (ingress protection), meaning it is protected against dust and can be water-resistant for up to 30 minutes. This makes it safe for use in humid environments. Technical specifications: Attribute Parameter MatGuard Range 440-F series Protected area 1500 x 1000mm Length 1.5m Width 1m Thickness 16mm Mat material Plastisol vinyl IP rating IP67 Year: 2023

Condition: used, Year of construction: 2017, 1 used CNC bandsaw machine Manufacturer: Metallkraft Type: HMBS 400 CNC Year of manufacture: 2017 Serial number: 4101602005F Hjdpfxjz A A Iqo Akrsnu Design: Fully automatic 2-column horizontal bandsaw Control system: Mitsubishi Electric GOT 2000 Cutting range (round), 0° to 400 mm Cutting range (square), 0° to 400 × 400 mm Bandsaw blade: 4,520 × 34 × 1.1 mm Bandsaw blade speed: 20–100 m/min, continuously variable Drive power: 3.0 kW / 400 V Material feed up to 490 mm per feed Max. feed length: 9,999 mm Table height: 800 mm Weight: approx. 1,300 kg Dimensions: approx. 2,600 × 2,150 × 2,050 mm Approx. 3 m roller conveyor, chip conveyor

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, High precision drilling and milling machine Fehlmann model Picomax 51 CNC Heidenhain TNC 360 very good condition CE conform Hthrgw39X Technical Data: >> Year of construction: 1995 >> Travel X/Y/Z 420/ 240/ 120 mm >> Travel distance W 450 mm >> Clamping surface (L x W) 730 x 280 mm >> Permissible table load 75 kg >> Distance table - spindle nose 0 - 560 mm >> Feed speed X/Y 1 - 7200 mm/min >> Feed speed Z 1 - 3600 mm/min >> Tool quick-change system SF 32 Hnodpfx Akjuxprlsreu >> Infinitely variable speed range 9200 rpm >> Drive power 4 kW >> Space requirement approx. (W x D x H) 2.0 x 1.5 x 2.4 m >> Fourth axis dividing head About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 51 CNC in very good condition with CE conformity. It has a Heidenhain TNC 360 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The tool holders (see pictures) are included. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine under power on site.

Condition: used, TECHNICAL DETAILS - Workpiece diameter : 1 - 80 [mm] - Max. plunge grinding length : 140 [mm] WORKING GRINDING WHEEL - Minimum wheel diameter : 360 [mm] - Maximum wheel diameter : 508 [mm] - Grinding wheel width : 200 [mm] - Peripheral speed : 45 [m/s] - Grinding wheel speed : 1900 [rpm] REGULATING WHEEL - Grinding wheel width : 40 [mm] - Wheel tilt : +/- 7 [°] - Minimum diameter of drive wheel : 220 [mm] - Maximum diameter of drive wheel : 305 [mm] Hnedpexz Hrmefx Akreu SUPPLY - Installed power : 30 [kW] - Supply : 400V, 50 [Hz] DIMENSIONS - Floor dimensions : 6000 x 4200 [mm] - Machine height : 3000 [mm] - Machine weight : 3100 [kg] EQUIPMENT - CNC SIEMENS SINUMERIK 840 D - Double slides for the plunge grinding wheel - Automatic loading through vibrating bowl

Condition: used, Year of construction: 1997, functionality: unexamined, machine/vehicle number: K2266, MAMMUT VMK 3 250 CNC 601 multi-needle industrial sewing machine, double-chain stitch, manufactured by Nähmaschinenfabrik Emil Stutznäcker (Cologne, Germany). A benchmark machine in the bedding industry for the continuous quilting of mattress casings, duvets, bedspreads, and panels. Features: - Manufacturer: MAMMUT (Emil Stutznäcker GmbH & Co. KG) - Type: VMK 3 250 CNC 601 - Year of manufacture: 1997 - Serial number: K2266 - Stitch type: double-chain stitch - 3 rows of needles, 75 mm spacing between rows - Minimum needle spacing: 25 mm Hjdpfx Asz N A Ryekrsnu - Working width: approximately 2,500 mm - CNC 601 numerical control - Integrated thread stand (cone holders) - Unwinders and fabric roller - Electrical cabinet with control and emergency stop - CE marking Location: Mouscron, Belgium Sale EXW, loading possible upon request.

Condition: used, TECHNICAL DETAILS - Workpiece diameter : 0.5 - 40 [mm] - Max. plunge grinding length : 95 [mm] WORKING GRINDING WHEEL - Grinding wheel width : 100 [mm] - Peripheral speed : 35 [m/s] - Grinding wheel speed : 2228 [rpm] - Minimum wheel diameter : 260 [mm] - Maximum wheel diameter : 406 [mm] REGULATING WHEEL - Grinding wheel width : 100 [mm] - Wheel tilt : +/- 6 [°] - Min. diameter of drive wheel : 150 [mm] Hjdpfxjuhb Rcs Akronu - Max. diameter of drive wheel : 205 [mm] SUPPLY - Installed power : 20 [kW] - Supply : 400V, 50 [Hz] DIMENSIONS - Floor dimensions : 4090 x 1640 [mm] - Machine height : 2.100 [mm] - Machine weight : 2.700 [kg] EQUIPMENT - CNC : SIEMENS SINUMERIK 840 D

Condition: used, TECHNICAL DETAILS - Min/max. grindable diameter: 1 - 100 [mm] - Max. length of the workpiece when plunging : 140 [mm] - Min/max work wheel diameter: 440/610 [mm] - Max. working wheel width: 80 [mm] - Peripheral grinding wheel speed: 50 [m/s] - Speed with new work wheel: 1565 [rpm] - Min./max. drive wheel diameter: 220/305 [mm] - Max. width of drive wheel: 67 [mm] - Max. drive wheel inclination: +/- 7 [°] - Drive wheel speed during machining: 0/140 [rpm] - Drive wheel speed in dressing: 200 [rpm] - Total installed power: 41 [kW] - Dimensions : 5920 x 5071 x 2500 [mm] - Net weight: 7000 [kg] EQUIPMENT - CNC SIEMENS 840D control - 5 numerical axis (1 for working grinding wheels facing device, 2 for driving grinding wheels facing device, 1 for upper slide, 1 for lower slide) - working grinding wheels facing device by diamond knurling wheel - driving grinding wheels facing device by diamond center - automatic parts feed bowl - parts conveying strip Hsdpfx Aksuhb R Aerenu

Condition: used, TECHNICAL DETAILS - Min/max. grindable diameter: 1 - 100 [mm] - Max. length of the workpiece when plunging : 140 [mm] - Min/max work wheel diameter: 440/610 [mm] - Max. working wheel width: 80 [mm] - Peripheral grinding wheel speed: 50 [m/s] Hsdouhb R Nepfx Akronu - Speed with new work wheel: 1565 [rpm] - Min./max. drive wheel diameter: 220/305 [mm] - Max. width of drive wheel: 67 [mm] - Max. drive wheel inclination: +/- 7 [°] - Drive wheel speed during machining: 0/140 [rpm] - Drive wheel speed in dressing: 200 [rpm] - Total installed power: 41 [kW] - Dimensions : 5920 x 5071 x 2500 [mm] - Net weight: 7000 [kg] EQUIPMENT - CNC SIEMENS 840D control - 5 numerical axis (1 for working grinding wheels facing device, 2 for driving grinding wheels facing device, 1 for upper slide, 1 for lower slide) - working grinding wheels facing device by diamond knurling wheel - driving grinding wheels facing device by diamond center - automatic parts feed bowl - parts conveying strip