Used Gildemeister Gs 20/6 for sale (67,213)

Condition: used, Integral automatic loader Pietro Cucchi Pick-up Pick-up recovery slide Podpfxey Exgts Antopt Hydraulic unit for pick-up

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door Podpfxjin Ub Te Antspt - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: used, Year of construction: 2007, turning diameter 325 mm turning length 600 mm control Siemens type 840D turning speeds 5000 U/min power capacity 25 kW total power requirement 35 kW weight of the machine ca. 6,5 t dimensions of the machine ca. 3,5x2,5x2,1 m Tool speed: 4500 rpm X-axis rapid traverse: 60 m/min Z-axis rapid traverse: 45 m/min Machine with Siemens 840 D powerline with Shopturn - C and Y axes, driven tools - IRCO ILS-RBK bar loader - Coolant system with internal coolant supply - Paper belt filter - Partial hollow clamping device - Oil mist separator - Counter spindle - Parts catcher The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Ppedpfsyquwksx Antst About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, mileage: 2,84,300 km, power: 309 kW (420.12 HP), first registration: 07/2020, fuel type: diesel, empty load weight: 15,200 kg, maximum load weight: 16,800 kg, overall weight: 32,000 kg, wheelbase: 5,100 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, cruise control, differential lock, low noise, navigation system, onboard computer, parking heater, soot filter, trailer coupling, MAN TGS 35.420 8x2-6 BL M-Tec hooklift/tipper/bulk carrier combination unit First registration: 7/2020 Only 284,300 km with supporting documentation Euro 6 emission standard Long-distance cab Automatic transmission Ppsdpox U Egfofx Antet Retarder Air conditioning, auxiliary heater Navigation system Lane keeping assist, adaptive cruise control Trailer coupling Weight variant 35,000 kg 8x2-6 axle configuration Leaf/air suspension 2nd axle can be lifted 4th axle can be steered and lifted Wheelbase 5100 mm Tires 315/70R22.5, tread depth approximately 50% Unladen weight 15,200 kg Hooklift/tipper/bulk carrier combination unit M-Tec HLS 20 Year of manufacture 2020 For roll-off containers and bulk carriers Additional unit TSA pocket silo Lifting and tilting capacity max.: 20,000 kg Export/net price: 79,900 Euro All information is without guarantee, subject to change.

Condition: used, Year of construction: 2004, turning diameter max. 560 mm turning length 600 mm control 840D powerline Siemens greates pass round over bed 680 mm Swing dia. over traverse guideway 565 mm centre distance 620 mm turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 25 / 37 kW max. Torque 390 Nm spindle nose 170H5 spindle bearing diameter 120 mm usable bar diameter 65 mm max. chucking diameter 250 mm C-Axis 0,025° / 360 ° Spindle speed range subspindle 20 - 7.000 min/-1 power capacity - Sub spindle 25 / 33 kW max. Torque 213 Nm spindle bearing diameter 90 mm spindle bore 57 mm spindle nose 140H5 Podpfx Anjwmf Tpjtjpt C-Axis 0,025° / 360 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tools max. 4.500 min -1 power capacity - driven tools 12,2 kW tool taper VDI 40 DIN 69880 Tool dimensions with square shank 40 mm x-axis 185 mm y-axis 80 mm z-axis 620 mm rapid traverse X: 60 m/min rapid traverse Y: 15 m/min rapid traverse Z: 45 m/min total power requirement 50 kVA weight of the machine ca. 7 t dimensions of the machine ca. 6,0 x 3,0 x 2,5 m CNC Turning- and MillingCenter GILDEMEISTER - CTX 420 linear V6 - Main and sub spindle - Tool drive - C axis / Y axis - Partial hollow clamping device - ShopTurn - Surface - Package bar processing consisting of: - Hollow clamping device 66mm - Workpiece picking device - Incl. 2x driven tools - Incl. 4x double tool holders - Incl. 4x tool holders - Incl. 83x tools

Condition: used, Year of construction: 2004, operating hours: 9,203 h, functionality: fully functional, machine/vehicle number: 8040939522C, total height: 2,276 mm, total length: 6,205 mm, total width: 2,214 mm, overall weight: 12,000 kg, For sale is a high-quality CNC turning machine, type Gildemeister CTX 620 Linear, manufactured in 2004. The machine underwent a comprehensive overhaul and technical refurbishment in 2025, with various components being replaced. This overhaul, carried out by DMG Used Machine, cost €60,000 alone. Here is a brief overview of what was done during the overhaul: Pjdpfx Aoy I U Ulsntjpt - Retrofitting of a steady rest (SMW) (clamping range 90-350 mm) - Replacement of the energy chain (Z-axis) - Replacement of all components in the energy chains for the X and Z axes (cables, hoses, fittings, etc.) - Repair of the tailstock The machine has a 12-position tool turret VDI 50 (Duplomatic), 6 tool holders for driven tools, and a 400 chuck (KH400). Control system: Heidenhain. The machine is still used for occasional production. Inspection is possible at any time, and the machine is connected to the power supply. Other machines are also available for sale; please inquire.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,395 h, travel distance X-axis: 380 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 2, This 3-axis Gildemeister CTX 620 linear was manufactured in 2007. A horizontal turning machine, it includes tool holders and a tail stock. Consider the opportunity to buy this Gildemeister CTX 620 linear horizontal turning machine. Contact us for more information. Siemens 840D with shopturnSpindle with integrated motorTailstockChip conveyorSpray gunAutomatic doorHollow clamping cylinder SMW 121 mmSMW Autoblok 400 BHD-FL ø 118 hollow Additional equipment • Tool holders (as shown in pictures) will follow Ppedex Stlqspfx Antst • Tailstock will follow Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), Year of construction: 1995, Centre height: 330 mm Centre distance: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter in front bearing: 140 mm Spindle bore: 107 mm Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Pjdpfx Aex Sx Htjntopt Rapid traverse X/Z axis: 10/10 m/min Turret: Number of tool stations: 12 Of which driven tool stations: 6 Tool shank holder: VDI 50 mm Dimensions / Weight: Required floor space (L x W x H): approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special Features: • CNC path control HEIDENHAIN TurnPlus EP 90 with color display • Spindle orientation, C-axis • 12-position turret, VDI 50, including 6 driven tool stations in turret, manufacturer SAUTER, DIN 5482 B 20x17, max. speed 3000 rpm • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic tailstock with drag device • Hydraulic quill actuation • Extraction unit, manufacturer LTA • Various tool holders VDI 50 • CE-compliant In 08/2025, GILDEMEISTER service replaced the following parts: 1 servo motor, 1 AC servo controller inverter power module for 2 axes, 1 Simodrive power module, 1 line-commutated return module, 1 control insert for 1 axis, 1 controller module for 2 axes inverter servo drive, 1 Simodrive power module for 1 axis motor. Total repair cost: EUR 17,000.00 net Important note: On this very well-maintained CNC turning and milling center GILDEMEISTER CTX 600-2000 (year 1995), the positioning of the C-axis does not function and the driven milling unit rotates but does not engage. Otherwise, the machine is in perfect condition. A demonstration under power is possible at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: reconditioned (used), functionality: fully functional, GILDEMEISTER GS20 LATHE VARIANT 25 MM ELECTRICALLY AND MECHANICALLY REFURBISHED -REFURBISHED PNEUMATIC SECONDARY CHUCK -NEW AIR TREATMENT UNIT AND SOLENOID VALVES -RADIAL AND AXIAL SLIDES IN POS. 1-2-4-5 -WORKPIECE PICK-UP AT POS. 6 MECHANICAL OVERHAUL: 1. TURNTABLE OVERHAUL 2. SLIDE OVERHAUL 3. FRONT AND LEVER OVERHAUL 4. SPINDLE OVERHAUL 5. COLLET OPENING/CLOSING SYSTEM OVERHAUL 6. THREAD CUTTING UNIT OVERHAUL Pedpfx Anew Sxptotspt ELECTRICAL OVERHAUL: 1. NEW SIEMENS S71200 PLC AND SIEMENS KTP700 PANEL 2. CAM ENCODERS 3. RELAY REPLACEMENT

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C1: 360 ° inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm number of toolpositions 13 pos. inner processing 4 outer processing 4 driven statition 5 pos Ppjdpfx Anjtqmnnotet Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: good (used), Year of construction: 2007, operating hours: 30,395 h, functionality: fully functional, Main spindle: Speed up to 5,000 rpm Counter spindle: 6,000 rpm C-axis turret: 12 stations Pjdpfxoy R Ddbs Antopt Siemens 840D Powerline Max. turning diameter: 320 mm Max. turning length: 600 mm Travel paths: X-axis: 250 mm, Z-axis: 600–635 mm Sub spindle Y-axis Chip conveyor C-axis Driven tools Bar feeder

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, CNC Swiss-Type Automatic Lathe GILDEMEISTER SPRINT 20/8 With Fanuc 32i Control Year of manufacture: 11/2019 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range: max. 10,000 rpm Travel Z1: 60 mm SUB SPINDLE Turning diameter: max. 20 mm Travel X2: 220 mm Travel Z2: 170 mm Speed: max. 10,000 rpm SLIDE 1 Travel X1: 50 mm Travel Y1: 325 mm SLIDE Y2 Travel Y2: 85 mm With the following accessories: Full safety enclosure with interior lighting Various tool holders Tool holder for slides 1-3 4 driven tools with 4 spindles, ESX/ER 16 fitting C-axis for main and sub spindle Y-axis on slides 1-2 2 cross slides Ppedpfx Aoy Rngaentot Workpiece unloading conveyor 4-color signal light beacon Fire extinguishing system Coolant system 165 l (Pumping capacity 90 l/min 1 bar) THE MACHINE IS IN AS-NEW CONDITION!! THE MACHINE HAS ONLY 110 PROGRAM RUNNING HOURS!!

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, CNC Sliding Headstock Automatic Lathe GILDEMEISTER SPRINT 20/8 linear Equipped with Fanuc 31i control Year of manufacture: 2016 Spindle bore: 20 mm MAIN SPINDLE Turning diameter: max. 20 mm Speed range: max. 10,000 rpm Z1 stroke: 80 mm SUB SPINDLE Turning diameter: max. 20 mm Z2 stroke: 300 mm Speed: max. 10,000 rpm SLIDE 1 X1 stroke: 50 mm Y1 stroke: 350 mm 6-position tool holder 12 x 12 mm 5 driven tools, including spindles with ESX 16 collet holders SLIDE 2 X2 stroke: 240 mm 4-position tool holder for external machining, 12 x 12 mm 4-position tool holder for internal machining, up to 20 mm diameter 5 driven tools, including spindles with ESX 16 collet holders 6 + 2 axes, 2 Y-axes as standard Linear drive for maximum precision Including the following accessories: Fully enclosed safety cabin with interior lighting Various tool holders C axis for main and sub spindle Bar feeder LNS Quick Load Servo 80 S2 Workpiece unloading conveyor Hinged belt chip conveyor 4-color signal tower Pedpfxjy Rm Snj Antjpt Fire extinguishing system Coolant system 250 liters (Pump capacity: 120 l/min, 1.5 bar) THE MACHINE IS IN EXCELLENT CONDITION!! THE MACHINE HAS ONLY 4,426 PROGRAM RUNNING HOURS!!

Condition: used, Year of construction: 2022, operating hours: 161 h, Genie GS-2646 scissor lift, year of manufacture: 2022, operating hours: 161 h, all-wheel drive, working height: 9.96 m, load capacity: 454 kg, platform extension: , overall width: 1.76 m, overall height incl. handrail: 2.31 m, platform length x width: 2.26 m x 1.18 m, gradeability: 25%, weight: 1,973 kg, maximum occupancy inside: 3, maximum occupancy outside: 3, very good condition, ready for immediate use! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Rental possible. = Further information = Podjy T Uvyspfx Antept Please contact Tobias Ebert for further information.

Condition: ready for operation (used), Rexroth MAC071C-0-GS-3-C / 095-B-0 Permanent Magnet Motor MNR: R911252732 SN:7162420000052, used, normal signs of use, 100% functional, scope of delivery as per photos Pedpji D Nfujfx Antopt

Condition: excellent (used), mileage: 5,80,939 km, power: 309 kW (420.12 HP), first registration: 12/2017, fuel type: diesel, tire size: 315/70-R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,990 mm, total width: 2,500 mm, total height: 3,380 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, onboard computer, parking heater, power assisted steering, power mirror, traction control, = Additional Options and Accessories = - 2-pedal control - Aluminum fuel tank - Rear work lights - Front work lights - Leaf spring suspension - Brake booster - Differential lock - High beam headlights - Windshield - Low noise - Speed limiter - Cab - Air conditioning - Alloy wheels - Air suspension - Air-suspended seats - Sleeper cab - Lane keeping assist - Stability control - Auxiliary heater - Automatic heating system - Toolbox - Xenon lighting - Central lubrication system = Notes = Very nice MAN TGS 18.420 4x2, built in 12/2017, with only 580,939 km, automatic transmission, Euro-6 with AdBlue, air conditioning, refrigerator, 1 bed, ADR (EXII, EXIII, FL, AT) valid until 03.08.2026, ALCOA rims, tires 315/70-R22.5 (tread depth: 11 mm, 7/8 mm; H: 12 mm, 7/7 mm), chassis number: WMA08SZZ9JM763248, MAN BrakeMatic, Dutch semi-trailer tractor unit with a valid general inspection (APK) until 03.08.2026. = Further Information = General Information Usable Material: Chemicals License Plate: BD-823-L Technical Information Number of Cylinders: 6 Engine Displacement: 12,419 cc Axle Configuration Tire Size: 315/70-R22.5 Brakes: Disc brakes Front Axle: Alloy rims; Max. axle load: 7100 kg; Steered; Tire tread left: 70%; Tire tread right: 75%; Suspension: Leaf spring suspension Rear Axle: Twin tires; Alloy rims; Max. axle load: 11500 kg; Tire tread left inner: 50%; Tire tread left outer: 45%; Tire tread right inner: 45%; Tire tread right outer: 45%; Suspension: Air suspension Weights Unladen Weight: 6,913 kg Payload: 11,687 kg GVW: 18,600 kg Maintenance, History and Condition Pedpfsy Ui Hvex Antept APK (Technical Inspection): valid until 08.2026 Technical Condition: very good Optical Condition: very good Further Information Please contact Arne Honingh for further information.

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 196 h, machine/vehicle number: 33884, load capacity: 454 kg, lifting height: 9,960 mm, lifting power: 454 kg/m, platform length: 2,260 mm, platform width: 1,160 mm, overall weight: 1,971 kg, transport length: 2,440 mm, transport width: 1,160 mm, transport height: 2,310 mm, fuel type: electric, tire condition: 60 %, color: blue, === KEY SPECIFICATIONS === Year: 2016 Operating hours: 196 h Machine width: 1.16 m Drive system: 4x2 Drive at full height: Yes Extendable platform: Yes Power: 24V DC battery system Working height: 9.96 m Platform capacity: 454 kg Drive type: Electric Battery type: Lead-acid Self-leveling outriggers: No Platform dimensions (L x W): 2.26 x 1.16 m Tyres: Non-marking solid CE certification: Yes Weight: 1971 kg Ppsdpfx Aey Dd Rhjntst Usage: Indoor and Outdoor === HIGHLIGHTS === ✔️ Reliable Genie quality ✔️ High lifting capacity (454 kg) ✔️ Compact and maneuverable design ✔️ Electric drive – zero emissions ✔️ Extendable platform for extra reach === CONDITION === Used machine in working condition. Visible signs of wear and usage (see photos). Tyres are worn and may require replacement. Machine is operational and ready for use. === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price € 6.250 (EXW / excl. VAT) Reliable and compact electric scissor lift, ideal for indoor maintenance, warehouse operations, and construction projects. This Genie GS-2646 offers a strong lifting capacity combined with a stable platform and efficient electric drive system. Thanks to its extendable platform and compact dimensions, it is perfect for working in tight spaces. All machines are available directly from stock in Sittard and can be delivered worldwide. === DELIVERY === Crane loading available on request Flexible worldwide shipping options Handled by Collé Rental & Sales logistics team

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 445 h, load capacity: 454 kg, lifting height: 9,960 mm, lifting power: 454 kg/m, platform length: 2,260 mm, platform width: 1,160 mm, overall weight: 1,971 kg, transport length: 2,440 mm, transport width: 1,160 mm, transport height: 2,310 mm, fuel type: electric, tire condition: 60 %, color: blue, === KEY SPECIFICATIONS === Year: 2016 Operating hours: 445 h Machine width: 1.16 m Drive system: 4x2 Drive at full height: Yes Extendable platform: Yes Power: 24V DC battery system Working height: 9.96 m Platform capacity: 454 kg Drive type: Electric Battery type: Lead-acid Self-leveling outriggers: No Platform dimensions (L x W): 2.26 x 1.16 m Tyres: Non-marking solid CE certification: Yes Weight: 1971 kg Usage: Indoor and Outdoor === HIGHLIGHTS === ✔️ Reliable Genie quality ✔️ High lifting capacity (454 kg) ✔️ Compact and maneuverable design ✔️ Electric drive – zero emissions ✔️ Extendable platform for extra reach === CONDITION === Used machine in working condition. Visible signs of wear and usage (see photos). Tyres are worn and may require replacement. Machine is operational and ready for use. === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price € 6.250 (EXW / excl. VAT) Reliable and compact electric scissor lift, ideal for indoor maintenance, warehouse operations, and construction projects. This Genie GS-2646 offers a strong lifting capacity combined with a stable platform and efficient electric drive system. Thanks to its extendable platform and compact dimensions, it is perfect for working in tight spaces. All machines are available directly from stock in Sittard and can be delivered worldwide. Ppjdpfxsy A Nn Ao Antet === DELIVERY === Crane loading available on request Flexible worldwide shipping options Handled by Collé Rental & Sales logistics team

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 301 h, machine/vehicle number: 33893, load capacity: 454 kg, lifting height: 9,960 mm, lifting power: 454 kg/m, platform length: 2,260 mm, platform width: 1,160 mm, overall weight: 1,971 kg, transport length: 2,440 mm, transport width: 1,160 mm, transport height: 2,310 mm, fuel type: electric, tire condition: 60 %, color: blue, === KEY SPECIFICATIONS === Year: 2016 Operating hours: 301 h Machine width: 1.16 m Drive system: 4x2 Drive at full height: Yes Extendable platform: Yes Power: 24V DC battery system Working height: 9.96 m Platform capacity: 454 kg Psdpfx Anoy Dd Sfjtspt Drive type: Electric Battery type: Lead-acid Self-leveling outriggers: No Platform dimensions (L x W): 2.26 x 1.16 m Tyres: Non-marking solid CE certification: Yes Weight: 1971 kg Usage: Indoor and Outdoor === HIGHLIGHTS === ✔️ Reliable Genie quality ✔️ High lifting capacity (454 kg) ✔️ Compact and maneuverable design ✔️ Electric drive – zero emissions ✔️ Extendable platform for extra reach === CONDITION === Used machine in working condition. Visible signs of wear and usage (see photos). Tyres are worn and may require replacement. Machine is operational and ready for use. === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price € 6.250 (EXW / excl. VAT) Reliable and compact electric scissor lift, ideal for indoor maintenance, warehouse operations, and construction projects. This Genie GS-2646 offers a strong lifting capacity combined with a stable platform and efficient electric drive system. Thanks to its extendable platform and compact dimensions, it is perfect for working in tight spaces. All machines are available directly from stock in Sittard and can be delivered worldwide. === DELIVERY === Crane loading available on request Flexible worldwide shipping options Handled by Collé Rental & Sales logistics team

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 313 h, load capacity: 454 kg, lifting height: 9,960 mm, lifting power: 454 kg/m, platform length: 2,260 mm, platform width: 1,160 mm, overall weight: 1,971 kg, transport length: 2,440 mm, transport width: 1,160 mm, transport height: 2,310 mm, fuel type: electric, tire condition: 60 %, color: blue, === KEY SPECIFICATIONS === Year: 2016 Operating hours: 313 h Machine width: 1.16 m Drive system: 4x2 Drive at full height: Yes Extendable platform: Yes Power: 24V DC battery system Working height: 9.96 m Platform capacity: 454 kg Drive type: Electric Battery type: Lead-acid Self-leveling outriggers: No Platform dimensions (L x W): 2.26 x 1.16 m Tyres: Non-marking solid CE certification: Yes Weight: 1971 kg Usage: Indoor and Outdoor === HIGHLIGHTS === ✔️ Reliable Genie quality ✔️ High lifting capacity (454 kg) ✔️ Compact and maneuverable design ✔️ Electric drive – zero emissions ✔️ Extendable platform for extra reach === CONDITION === Used machine in working condition. Visible signs of wear and usage (see photos). Tyres are worn and may require replacement. Machine is operational and ready for use. === LOCATION & PRICE === Located in Sittard, Netherlands Worldwide delivery available Price € 6.250 (EXW / excl. VAT) Reliable and compact electric scissor lift, ideal for indoor maintenance, warehouse operations, and construction projects. This Genie GS-2646 offers a strong lifting capacity combined with a stable platform and efficient electric drive system. Thanks to its extendable platform and compact dimensions, it is perfect for working in tight spaces. All machines are available directly from stock in Sittard and can be delivered worldwide. === DELIVERY === Ppedpfx Anjy A Nqkstst Crane loading available on request Flexible worldwide shipping options Handled by Collé Rental & Sales logistics team

Condition: good (used), functionality: fully functional, Year of construction: 2016, load capacity: 544 kg, lifting height: 6,100 mm, lifting power: 544 kg/m, platform length: 2,260 mm, platform width: 1,150 mm, overall weight: 1,974 kg, empty load weight: 1,974 kg, transport length: 2,410 mm, transport width: 1,170 mm, transport height: 2,130 mm, fuel type: electric, tire size: 15 x 5 x 11, tire condition: 65 %, color: blue, === KEY SPECIFICATIONS === Year: 2016 Operating hours: On request Machine width: 1.17 m Drive system: 2WD / dual front wheel drive Drivable at full height: Yes Extendable platform: Yes Power: 24V DC battery system Battery condition: New batteries Working height: 8.10 m Platform height: 6.10 m Platform capacity: 544 kg Extension deck capacity: 113 kg Power type: Electric Battery type: Lead-acid, 24V DC Battery configuration: 4 x 6V / 225 Ah Self-levelling outriggers: No Platform dimensions: 2.26 x 1.15 m Platform length extended: 3.18 m Slide-out platform extension: 0.91 m Tyres: Solid non-marking Tyre size: 15 x 5 x 11 in / 38 x 13 x 28 cm CE certification: Yes Weight: 1,974 kg Indoor / outdoor use: Both, subject to local regulations === HIGHLIGHTS === New batteries installed Compact electric scissor lift Ppodpfey Tidrex Antst 8.10 m working height 544 kg platform capacity Extendable platform Solid non-marking tyres Zero inside turning radius Suitable for indoor and outdoor applications CE-certified machine Ready for immediate transport and use === CONDITION === Clean and original used condition. Equipped with new batteries. The machine has been checked and is ready for operation. Inspection possible on request. === LOCATION & PRICE === Located in Sittard, The Netherlands. Worldwide delivery possible. Price on request (EXW / excl. VAT). This Genie GS-2046 is a reliable electric scissor lift with a working height of 8.10 metres and a platform capacity of 544 kg. Thanks to its compact 1.17 m machine width, solid non-marking tyres and extendable platform, this machine is suitable for a wide range of indoor and outdoor access applications. The machine is equipped with new batteries, offering improved reliability and direct usability. The Genie GS-2046 is known for its simple operation, compact dimensions and strong platform capacity. A practical and well-maintained electric scissor lift, ready for immediate use. === DELIVERY === Crane loading possible on request for smooth transport. Flexible transport options available depending on destination. All transport can be professionally handled by the logistics team of Collé Rental & Sales.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 857 h, load capacity: 454 kg, lifting height: 7,960 mm, lifting power: 454 kg/m, platform length: 2,260 mm, platform width: 1,160 mm, overall weight: 1,971 kg, transport length: 2,360 mm, transport width: 1,160 mm, transport height: 1,700 mm, construction height: 2,390 mm, fuel type: electric, tire size: 38 x 13 cm, tire condition: 60 %, color: blue, === KEY SPECIFICATIONS === Year: 2006 Operating hours: 857 h Machine width: 1.16 m Drive system: 4x2 Drive at full height: Yes Extendable platform: Yes Power: 24V DC battery system Battery condition: New batteries Working height: 9.96 m Platform capacity: 454 kg Drive type: Electric Battery type: Lead-acid Self-leveling outriggers: No Platform dimensions: 2.26 m x 1.16 m Tyres: Non-marking solid CE certification: Yes Weight: 1971 kg Usage: Indoor and Outdoor Ppjdpfx Aoy Rxrasntst === HIGHLIGHTS === ✔️ Reliable Genie quality ✔️ Equipped with new batteries ✔️ High lifting capacity 454 kg ✔️ Compact and maneuverable design ✔️ Electric drive with zero emissions ✔️ Extendable platform for extra reach === CONDITION === Used machine in working condition. Equipped with new batteries. Visible signs of wear and usage, see photos. Tyres are worn and may require replacement. Machine is operational and ready for use. === LOCATION AND PRICE === Located in Sittard, Netherlands Worldwide delivery available Price € 4.250 EXW, excl. VAT Reliable and compact electric scissor lift, ideal for indoor maintenance, warehouse operations and construction projects. This Genie GS-2646 offers a strong lifting capacity combined with a stable platform and efficient electric drive system. The machine is equipped with new batteries, making it ready for direct use. Thanks to its extendable platform and compact dimensions, it is perfect for working in tight spaces. All machines are available directly from stock in Sittard and can be delivered worldwide. === DELIVERY === Crane loading available on request Flexible worldwide shipping options Handled by Collé Rent

Condition: good (used), functionality: fully functional, Year of construction: 2015, load capacity: 454 kg, lifting height: 7,960 mm, lifting power: 454 kg/m, platform length: 2,260 mm, platform width: 1,160 mm, overall weight: 1,971 kg, transport length: 2,360 mm, transport width: 1,160 mm, transport height: 1,700 mm, construction height: 2,390 mm, fuel type: electric, tire size: 38 x 13 cm, tire condition: 60 %, color: blue, === KEY SPECIFICATIONS === Year: 2015 Operating hours: On request Machine width: 1.16 m Drive system: 4x2 Drive at full height: Yes Extendable platform: Yes Power: 24V DC battery system Battery condition: New batteries Working height: 9.96 m Platform capacity: 454 kg Drive type: Electric Battery type: Lead-acid Self-leveling outriggers: No Platform dimensions: 2.26 m x 1.16 m Tyres: Non-marking solid CE certification: Yes Weight: 1971 kg Usage: Indoor and Outdoor === HIGHLIGHTS === ✔️ Reliable Genie quality Ppjdpfjy Rxqijx Antst ✔️ Equipped with new batteries ✔️ High lifting capacity 454 kg ✔️ Compact and maneuverable design ✔️ Electric drive with zero emissions ✔️ Extendable platform for extra reach === CONDITION === Used machine in working condition. Equipped with new batteries. Visible signs of wear and usage, see photos. Tyres are worn and may require replacement. Machine is operational and ready for use. === LOCATION AND PRICE === Located in Sittard, Netherlands Worldwide delivery available Price € 5.850 EXW, excl. VAT Reliable and compact electric scissor lift, ideal for indoor maintenance, warehouse operations and construction projects. This Genie GS-2646 offers a strong lifting capacity combined with a stable platform and efficient electric drive system. The machine is equipped with new batteries, making it ready for direct use. Thanks to its extendable platform and compact dimensions, it is perfect for working in tight spaces. All machines are available directly from stock in Sittard and can be delivered worldwide. === DELIVERY === Crane loading available on request Flexible worldwide shipping options Handled by Collé Rent

Condition: good (used), Year of construction: 2016, operating hours: 1,556 h, fuel type: diesel, Genie GS 2669 RT Scissor Lift / Aerial Work Platform, 10m working height, 4x4 Kubota Diesel, year 2016. Inspection valid until 7-2026. Video can be sent via Whatsapp. Psdpfx Asy R Ddnontopt Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a rotating stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices and in AS-IS condition without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), functionality: fully functional, Year of construction: 2012, load capacity: 318 kg, lifting height: 9,780 mm, lifting power: 318 kg/m, platform length: 2,260 mm, platform width: 1,160 mm, overall weight: 2,812 kg, transport length: 2,440 mm, transport width: 1,170 mm, transport height: 1,830 mm, fuel type: electric, tire condition: 60 %, === MAIN SPECIFICATIONS === Year: 2013 Operating hours: On request Machine width: 1.17 m Drive system: 2 WD Drivable at full height: Yes Platform extension: Yes (0.91 m slide-out) Working height: 11.8 m Platform capacity: 454 kg Power type: Electric Battery type: Lead-acid (4 × 6 V, 225 Ah) Outriggers self-leveling: No Platform size: 2.41 × 1.15 m (extends to 3.18 m) Tyres: Non-marking solid rubber (38 × 13 × 28 cm) CE certified: Yes Machine weight: 2,812 kg Indoor / Outdoor use: Both === HIGHLIGHTS === Carefully selected used unit with verifiable service history CE certification and full documentation included Ready for immediate transport and use Comprehensive technical documentation available === CONDITION === Used condition (4/5) – some wear consistent with age and use Battery tested and functional Clean exterior and fully operational systems Available immediately from Sittard stock === LOCATION & DELIVERY === Located in Sittard, Netherlands Worldwide delivery possible Price €6,750 (EXW, excluding VAT) Pedey Rrkiopfx Antjpt Ideal for indoor and limited outdoor use thanks to compact dimensions and reliable 2WD traction. Fully CE certified. Spare parts and aftersales support available upon request. === DELIVERY === Crane loading available on request for smooth handling Flexible transport options tailored to your destination and logistics needs All shipments are professionally managed by the Collé Rental & Sales logistics team