Used Gleason Model 610 for sale (16,429)

Condition: good (used), gear diameter: 508 mm, total height: 1,780 mm, total length: 2,990 mm, total width: 2,200 mm, MODEL 610 GLEASON GEAR ROUGHER/FINISHER Equipped with: Hydraulic Workholding Pendant Control Chip Conveyor Index Plate Geneva Cam Change Gears Hydraulic System Coolant System Manuals Specifications: Maximum Gear Pitch Diameter: 20" Cutter Diameters: 9", 10.5", 12",14",16", 18" Whole Depth: 1.250" Root Angle: 60 to 80 deg. Face Width: 3.0" Extreme Ratio (Minimum): 2.25 to 1 Number of Teeth: 20 to 75 Diameter of Taper Hole at Large End: 3-27/64" Cutter Speeds (Per Minute) for Roughing: 15.6' to 87.7' Feeds (Seconds Per Tooth) for Roughing: 3 to 35 Cutter speeds (Per Minute) for Finishing: 6.8' to 20.5' Ijdpfortrykex Af Tjib Feeds (Seconds Per Tooth) for Finishing: 3 to 9 Floor Space: 118" x 86.5" x 70" H Weight: 17,500 lbs.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Iedpfxjrtrzdo Af Tjib Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: ready for operation (used), Fanuc A06B-0819-B001 DC Spindle Motor Model 6S SN: 061072, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Ijdpfxjy Npcgj Af Tjib

Condition: used, Year of construction: 2001, functionality: fully functional, wheel diameter: 350 mm, gear diameter: 400 mm, wheel width: 50 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 600 rpm, workpiece weight (max.): 1,020 kg, total height: 3,048 mm, total length: 3,658 mm, total width: 2,590 mm, feed length X-axis: 440 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 10 m/min, rotational speed (min.): 600 rpm, pivoting range: 80 °, rotational speed (max.): 6,000 rpm, spindle bore: 80 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, travel speed (max.): 10,000 mm/min, workpiece diameter (max.): 400 mm, We offer this used Gleason-Pfauter P400G (400mm/800mm) CNC gear grinder machine, year of construction 2001. Type: Gear Grinders Model: P400G Brand: GLEASON PFAUTER Stock Number: GH1076 Serial # 28-727 Condition: Used Year: 2001 Description: Gleason Pfauter Model P400G 5-Axis CNC Gear Grinder Maximum Workpiece Diameter: 400 mm/800mm / 15.74”/31.48" Maximum Grindable Profile Depth: 35 mm / 1.37” Maximum Grinding Wheel Diameter: 350 mm / 13.77” Maximum Grinding Wheel Width: 50 mm / 1.96” Diameter of the Spindle Journal for Retaining: 80 mm / 3.14” X-Axis Travel (Radial): 440 mm / 17.32” Y-Axis Travel (Tangential): 200 mm / 7.87” Z-Axis Travel (Axial): 400 mm / 15.74” Maximum Grinding Head Pivoting Angle (+A-A): +/- 40° Maximum Table Load: 10 kN / 2,248 Lbs. Worktable Diameter: 380 mm / 14.96” Worktable Bore: 80 mm / 3.14” Tailstock Travel Distance: 650 mm / 25.59” Tailstock Locating Bore: 90 mm / 3.54” Feed and Rapid Traverse Rate (X-Axis): 10,000 mm/min / 393.70 IPM Feed and Rapid Traverse Rate (Y-Axis): 5,000 mm/min / 196.85 IPM Feed and Rapid Traverse Rate (Z-Axis): 10,000 mm/min / 393.70 IPM Tool Speed (Spindle-S): 600 to 6,000 RPM Worktable (C-Axis): 0 to 32 mm/min / 0 to 1.25 IPM Dresser Travel Distance (Z2-Axis): 200 mm / 7.87” Dresser Feed and Rapid Transverse (Z2-Axis): 5,000 mm/min / 196.85 IPM Dresser Spindle Speed (Spindle – S2): 3,000 to 6,000 RPM Maximum Dressing Wheel Diameter: 150 mm / 5.90” Approximate Machine Dimensions: 144” LR x 102” FB x 120” Height Approximate Filtration System Dimensions: 72” LR x 136” FB x 99” Height Approximate Control Cabinet Dimensions: 42” LR x 72” FB x 88” Height If you have any questions or need more information, feel free to send us a message or give us a call. Iodjyuqrropfx Af Teib

Condition: good (used), Leonhard Kurz Model H Book Edge Gilding Machine This machine is in very good condition and ready to use. This machine is from the popular Leonhard Kurz manufacturer, manufactured in Germany. Description This edge gilder is suitable for books, cards, invitations, and business cards. Ijdpey N Dxcsfx Af Toib Hand-operated clamp, powered by only 230V. A powerful clamp with adjustable pressure ensures repeatability. The machine features a convenient material clamp, depth adjustment, and a convenient base with wheels. Specifications: Mechanical clamping mechanism Power consumption: 170W Power supply: 230V Machine weight: 80kg

Condition: excellent (used), Original Stryker Stair-Pro stair chair, model 6252, designed for the safe transport of patients up and down stairs. Equipped with a track system that significantly reduces the effort required by rescuers and increases control during descent. Robust aluminum construction, high load capacity (approx. 227 kg), complete set of safety belts, and foldable components for ease of transport and storage. The equipment is fully operational, complete, and in very good visual condition – ready for immediate use. Made in the USA. Ideal for EMS teams, fire departments, hospitals, ERs, and nursing homes. Key features: • Model: Stair-Pro 6252 • System: track system (safe stair descent) • Load capacity: up to approx. 227 kg • Construction: lightweight and durable aluminum frame • Safety: securing belts, stable handles • Condition: used, very good, fully functional • Manufacture: Made in USA Ijdpfx Afsx N Idco Tjib

Condition: excellent (used), Ferno Model 59 T EZ Glide – stair transport chair, 227 kg. Professional evacuation and transport chair by Ferno with EZ Glide system, designed for the safe descent of patients down stairs. Sturdy aluminium frame, complete set of safety straps, foldable components for easy transport and storage. The equipment is functional, well-maintained, and ready for use. Ideal for EMS, fire services, hospitals, and care facilities. Price listed per unit. Iedpfx Ajx N Ic Ejf Toib

Condition: ready for operation (used), Year of construction: 1980, Gleason Hypoid cutter Sharpener 13A -1 pcs Milling diameter 89-500 mm Grinding wheel dimensions 305x19x102 mm Feed 0,05-0,18 mm Iodpjr Elpvjfx Af Teib Grinding wheel drive motor - 1800 rpm (60 Hz) - 1500 rpm (50 Hz) Floor space 1240x2310 mm Height 1422 mm Machine weight 4083 kg Gleason 19 revacicle cutter checking machine - 1 pcs

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: SIEMENS, controller model: 840, overall weight: 11,500 kg, number of axes: 5, This 5-axis Gleason PFAUTER G320 CNC + Promot Automation was manufactured in 2001. It features a Siemens 840 control unit, a maximum workpiece diameter of 380 mm, and a module range of 0.5-7.0. The system includes Promot Automation handling, a robotics system, and a cooling belt system. If you are looking to get high-quality gear grinding capabilities consider the Gleason PFAUTER G320 CNC machine we have for sale. Contact us for more information about this machine. • Operator panel: included • Module range: 0.5–7.0 • Workpiece diameter: min 10 mm, max 380 mm • Number of teeth: 10–600 • Axis travels: Z (vertical) 200 mm; X (horizontal) 230 mm; Y (tangential/shift) 135 mm • Clamping head swivel (A): ±45° • Tailstock stroke: 125 mm • Dressing travels: V (tangential) 180 mm; U (radial) 110 mm • Grinding wheel speed: up to 3000 rpm, stepless • Linear axis speed: 10,000 mm/min • Max. table rotation speed: 240 rpm • Table resolution: 0.001° • Feeds: machining and working feeds stepless Iisdpfx Afoyf E R Ds Teb • Grinding wheel dimensions: diameter 270–350 mm; width up to 104 mm; bore 160 mm • System weight: approx. 11,500 kg • Space required (machine): approx. 3.7 m × 2.4 m × 2.75 m Additional equipment • Promot Automation handling unit (robotics handling) • Operator panel/handheld (for automation) • Conveyor belt • Cooling belt system • Hydraulic unit • Space required (automation): approx. 4.5 m × 1.6 m × 4.0 m • Accessories as shown in photos

Condition: excellent (used), Year of construction: 2018, max. wheel diameter 450 mm max. module 4 mm internal dia. - min. 100 mm internal dia. - max. 300 mm Maximum permissible peeling wheel diameter 175 mm Diameter of the installation area 125 mm slide travel X-axis 350 mm slide travel Z-axis 300 mm slide travel Z-axis 440 mm Largest swivel range of the peeling head ±25 Grad workpiece table outer diameter 570 mm Workpiece table – Maximum permissible load 5 kN Feed - X 12000 mm/min Feed - Y 5000 mm/min Feed - Z 8570 mm/min Iiedsy Sbi Djpfx Af Tjb Tools speed 0-3000 U/min Workpiece table speed 0-1500 U/min voltage 400 V weight of the machine ca. 11 t dimensions of the machine ca. 5,85 x 8,3 x 3,8 m Technical specifications: - CNC Siemens 840 sl - Swivel grab travel: 180 degrees Fluids: - Hydraulic: 150 l - Coolant: 850 l - Engine and hydraulic cooling: 100 l - Grease lubrication: 2 kg

Condition: used, Year of construction: 2002, Technical details: Iiedjy Nk Idepfx Af Tob max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 min. module: 0,5 total power requirement: 45 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation *

Condition: used, Year of construction: 2008, control Siemens 840D Iedpfx Afjwzypns Tjib

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Iiodpsxq Hgcjfx Af Tsb Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: used, Cnc gear hobber GLEASON PFAUTER P60 Iedpfoyuzggsx Af Tjib

Condition: used, Cnc gear hobber GLEASON PFAUTER P60 Iiodpsyuzgaefx Af Tob

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 350 mm gear width 230 mm max. module 8 min. module 1 Iiodpfx Afey D T Upj Tjb Control Siemens 840 weight of the machine ca. 10,5 t dimensions of the machine ca. 4,5 x 2,5 x 3,0 m Loading unit, very good condition.

Condition: used, Year of construction: 2007, workpiece diameter nominal 2400 mm max. workpiece diameter 2800 mm max. module 30 mm control Siemens Sinumerik 840 D dividing plate diameter 2200 mm table diameter 2500 mm Table hole Diameter / depth 800 / 875 mm max. table load 40000 kg Table rpm 4,5 min-1 Iedew Rf S Sjpfx Af Toib clamping length max. 375 mm clamping diameter max. 350 mm cutter diameter max. 2800 mm Cutter arbor cone HSK-B160 swivelling range milling head + 30/-45° Distance Cutter - Workpiece 615 / 1600 mm weight of the machine ca. 57 t Slide drives: - Feed & rapid traverse speed: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Equitment/Accessories: - IFK2 internal milling head - Milling arbor with spacers - chip conveyor - Oil mist extraction - technical Documentation

Condition: used, cone distance min./max. 0-108 mm Pitch angle min/max 5°/84° Control GE Fanuc Series 0-GC Pitch diameter (1:1 ratio) 152 mm pitch diameter (10:1 ratio) 216 mm Diametral pitch (finest/coarsest) 1.3/8.5 Mod. Face width gear wheel max. 35 mm Ijdpjyh Rmmjfx Af Tjib Knife spindle - Speed range 41-121 U/min working spindle speed range 0-33.33 U/min weight 9025 kg dimensions of the machine ca. 2707 x 2720 x 2200 mmxmmxmm Equipment/accessories: -Knife -Chip conveyor -Technical documentation

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames Iijdpfsywdr Eex Af Teb – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: excellent (used), Year of construction: 2002, max. wheel diameter 130 / 80 mm gear width 180 mm max. module 4 min. module 0,5 spindle turning speed - stepless 300 - 3000 U/min control Siemens 840 D x-travel 200 mm y-travel 170 mm z-travel 250 mm milling head -swivable +/- 45 ° table diameter 168 mm table hole 65 mm clamping length max. 245 mm table turning speeds 0 - 1000 U/min total power requirement 51 kW weight of the machine ca. 9,2 t dimensions of the machine ca. 4,5 x 4,0 x 3,2 m Ijdoxlug Hepfx Af Tsib

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 300 mm gear width: 100 mm max. module: 5 workpiece turning speeds: min Iisdpsyzh Rajfx Af Tjb work piece - max.: 1100 mm workpiece clamping: auto. tension device number of spindle speeds: 1/min. spindle bearing diameter: 100 mm diameter of spindle flange: 120 mm tailstock travel: 80 mm weight of the machine ca.: 3500 KG dimensions: 1200 x 1450 x 2250 mm total power requirement: 10 kVA The Gear Tooth Deburring machine WERA, ZEM 300 for deburring of splines gear wheels and shafts, with Pointing Facility. *

Condition: used, Year of construction: 2004, workpiece diameter 125 mm module 4 control SIEMENS SINUMERIK travel -x axis 105 mm travel -y axis 40 mm travel -z axis 500 mm workpiece diameter 17 - 39,5 mm workpiece height 6 - 15 mm Isdpfxjx Szm As Af Tjib Gear Honing Machine | GLEASON-HURTH - ZH 125 The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ZH125 | ZH-125

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 130 mm gear width: 170 mm max. module: 3 min. module: 0,5 total power requirement: 48 kVA weight of the machine ca.: 9 t Iiodpjwdyx Uofx Af Tsb dimensions of the machine ca.: 7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 table diameter: 168,14 mm boring diameter: 65,532 mm weight of the machine ca.: 11 t table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück This machine can be used to make tandler gears. However, for helical gearing, a helical guide is also required. Iedpsxz Avbsfx Af Tjib *

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg Iiedpfx Afswzyp Ie Teb voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm