Used Gm Gera Gel3 Rv1-230/110-18 for sale (21,379)

Year of construction: 2007, condition: ready for operation (used), A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026. Fgsdpfx Adexfbczerjf

Condition: used, Year of construction: 2005, Overview The bottle washer was previously used in a mineral water factory. Due to the good maintenance, the machine is in good condition. All basins and the machine body are made of stainless steel. The machine is still working and will be free in early 2027, when the complete line is replaced. Tech Specs - Capacity: 15,500 bph - Cell Pitch: 95mm - Bottles per row: 16 - Dimensions + Weights: Housing: 8350 x 1,860 x 2,990 mm / 21,750kg Ready for operation with attachments: 8,700 x 3,560 x 3,330mm / 37,639kg Fjdpfx Adezbha Heregf - YOM 2005 - Formats: - 0,5l - 0,75l The Machine in Detail / Equipment Features - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Label press mounted to the machine - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Fjdot Ul Exspfx Adrjgf

Year of construction: 2018, condition: used, A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet. Additional title: single-ended machine for cleaning glass bottles Fgedjzizyzepfx Adrjf Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs. Processing time: 14,14 min Heating / Cooling: 1.352.712 kJ/h Water: 7,92 m3/h Formats: 0,5 l NRW bottles Material: housing from stainless steel Position: in a cabinet on legs with an enlarged surface area Base construction: sinle-ended machine Features: pre-soaking and lye baths; spray nozzles; bottle conveyor with drives; pumps; top surface serving as a work platform with guardrails; housing; control cabinet; touchscreen display serving as an HMI panel

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: - Capacity: 6,700 bph - Cell Pitch: 102 mm - Bottles per row: 10 - Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg Fgodpowg E D Iofx Adrsf - YOM 1999 - Formats: - 0,33l - 0,5l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge - Machine dismantled, ready to ship - Automated machine Startup

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: - Capacity: 9,500 bph - Cell Pitch: 95 mm - Bottles per row: 25 - Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg - YOM 2024 - Formats: - 0,25l - 0,33l - 0,5l - 0,75l The Machine in Detail / Equipment Features: - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - High pressure pre rinsing - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - 24 volt control voltage - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge Fgodovrfivspfx Adrof - Machine dismantled, ready to ship - Automated machine Startup

Year of construction: 2007, condition: used, A single-ended machine for cleaning glass bottles, with labels removed via a chain. The cleaning solution is steam-heated. Additional title: Single-ended machine Capacity: 17000 bo/h Weight: 26400 kg Machine partitioning: chain division: 110 mm Operation / Control: Simatic S7 Fgedezg I Efepfx Adref

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Fjdpsl Hx Adefx Adrjgf

Condition: used, Year of construction: 2007, Cleaning machine, manufacturer GM Gera, model: Arcade GEK2.1RV1, for 4,000 bottles/hour, 9 bottles/row, for 0.5 l NRW bottle, cell pitch 95mm, with pre-diverter, caustic bath 1+2, hot water bath 1+2, cold and fresh water spraying. Contact us for further information. Fgodpjxghnajfx Adrsf

Condition: used, Year of construction: 2003, Cleaning machine, manufacturer: GM Gera, type: Arcade, for 24,000 bottles/h, adjustable range 7,600 – 26,400 bottles/h 25 bottles/row basket pitch 95 mm, chain pitch 140 mm with Siemens S7 control system dismantled, available for inspection at warehouse Fgsdpfoyzdq Nex Adrsf

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request. Fgodpfou U Hvwjx Adref

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Fgodewb E S Ispfx Adref

Condition: good (used), Several measuring probes from Heidenhain are for sale. Fgedpshlafnefx Adrof -Manufacturer: Heidenhain -Type: TS110 / TS111, untested = €450 each TS110 / TS111, tested = €750 each TS220 / TS230 = €1,250 each ! As several measuring probes are for sale, please specify the desired type! -Mount: SK50

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data - Line type: Returnable glass bottling line - Application: Beverage filling in returnable glass bottles - Formats: 0.33 L and 0.75 L glass bottles - Packaging: Bottles in crates - Filler capacity: 18,000 bottles/hour - Premix capacity: 22,000 L/hour - Closure type: Plastic screw caps - Labelling: Wet glue labelling, 2 aggregates - Main machine years: 1996 – 2016 - Dismantling planned: February 2027 Scope of Delivery - Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated - Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 - Crate Decapper | RINK | KM 690/4K | 2012 - Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 - Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 - Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 - Empty Bottle Inspector | Krones | Linatronic | 2014 - Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 Fgsdpjza Tx Sefx Adrof - Labelling Machine | Krones | Universella | 2012 - Closure Inspection | Syscona | Expert FHK | 2016 - Inspection System | Krones | Checkmat 731 | 2012 - Crate Packer | Kettner | 1996 - Crate Inspection | Krones | Checkmat 708 | 2011 - Palletizer | Matec | Rotomat 3B | 2002 - Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000

Condition: new, empty load weight: 140 kg, maximum load weight: 610 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,304 mm, loading space width: 1,256 mm, loading space height: 1,400 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Car trailer UNITRAILER Garden Trailer 230 KIPP [with support wheel, 110 cm high tarpaulin and high bows] Transport trailer UNITRAILER Garden Trailer 230 KIPP is the latest product from UNITRAILER. It is currently our largest car trailer with a maximum permissible weight of up to 750 kg. The trailer has a folding tailgate, which enables loading and unloading in just a few minutes. By using a tiltable drawbar, it can be placed vertically on the rear wall. We will take care of all the formalities associated with the purchase for you. The trailer will be delivered to the address you specify within 5 working days together with the registration documents. Once you have received the trailer, you only need to register and insure it to be able to use it in full. Height of the side walls: 30 cm Height of the tarpaulin: 110 cm Fjdpfx Aet Iv Abjdregf Total height of the loading area: 140 cm Advantages of the Garden Trailer 230 KIPP car trailer If you decide to buy our new car trailer, you will receive a 2-year warranty so that you can use it without worrying about damage. Each product is sent with a user manual and a warranty booklet. All important documents will be sent to you together with the purchased Garden Trailer 230 KIPP. Furthermore, you always have the option of purchasing additional equipment in the form of a jockey wheel or anti-theft device or additional drop sides. If you have any questions or problems when using the trailer, you can contact our advisors at any time. They will be happy to provide you with all the information you need and explain everything to you. Our car trailer can also be used thanks to its tiltable drawbar. This makes it much easier to load and unload goods that you would normally have to lift or put down. This solution is also most often found in much more expensive trailers, which significantly affects the better feeling of using them. Another advantage of this solution is the ability to hold the trailer vertically with the drawbar folded in and resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in the garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or anywhere!

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines from Netstal, type SynErgy 2000-230/110. The machines were in production until recently. The company from which these machines originate places great emphasis on maintenance and servicing, which is why the machines are in very good condition. 2-cavity function Rotating platen Designation: Netsal SynErgy 2000 Year of manufacture: 2012 Operating hours: 28,828 Weight: 13,300 kg Clamping force in kN: 2000 Injection unit: 230 Machine drive: 45 kW drive power Length: 6901 mm Width: 2075 mm Height: 2240 mm Cylinder size AG1: 20mm / 32mm - Available Cylinder size AG2: 25mm / 32mm - Available ____ Handling: Wittmann, can be purchased separately Serial number: W833PRO – 0284 Operating hours approx.: 13,000 h Year of manufacture: 2016 Conveyor belt (lower) Width: 400 mm Length: 2300 mm The systems can be purchased complete or as individual parts. Machines have already been disassembled. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale Fgjdekv Uq Ispfx Adrof PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: good (used), Year of construction: 2014, For sale are two identical injection molding machines from Netstal, type SynErgy 2000-230/110. These machines were in production until recently. The company from which these machines originate places great emphasis on maintenance and upkeep, which is why the machines are in very good condition. Features: * 2-cavity mold * Rotary table Description: Netsal SynErgy 2000 Clamping force in kN: 2000 Machine drive power in kW: 45 Year of manufacture: 2014 Operating hours: 20209 Weight: 13300 kg Length: 6901 mm Width: 2075 mm Height: 2240 mm plus 800 mm Flow Box Cylinder size AG1: 20 mm Cylinder size AG2: 16 mm _____ Description: Flow Box Type: LMP 105 Manufacturer: Max Petek Serial number: S 140743 Year of manufacture: 2014 _____ Can also be purchased separately: Robot: Krauss – Maffei MH 50 Description: 6-axis: Yaskawa Type: DX 100 Operating hours approx.: 8900 Year of manufacture: 2014 The systems can be purchased as a complete set or individually. Prices do not include VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Fgedpfekwb Dijx Adref Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), Simplacutter model IV 110×160 Cauhe die cutter The machine is fully operational, like new. Made in Spain. Frame size: 1100×1600 mm Sheet size: 1160×1680 mm Weight: 8500 kg Power supply: 380 V Installed power: 7.5 kW Impact force: 350 t Equipment: – pneumatic clutch and brake – control panel – two frames Fodpfx Aszmu I Todrogf – 2 operating modes: time-delayed, manual – central lubrication – additional safety guards – safety pressure mats – operating tools – hard sheet metal

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR geared motor with a three-phase Lenze DERA071-12 motor, 0.25 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the photos. This geared motor with a worm gear is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze Motor type: DERA071-12 Power: 0.25 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1365 rpm Output speed: 186.6 rpm Torque: 11 Nm Gear ratio: i = 7.5 Protection class: IP55 Insulation class: F Duty cycle: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Fgodpszncq Sofx Adref Sold exactly as shown in the photos.

Condition: new, power: 184 kW (250.17 HP), first registration: 09/2025, fuel type: diesel, tire size: 295/80R22.5, axle configuration: 4x2, wheelbase: 4,430 mm, fuel: diesel, fuel tank capacity: 220 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, total length: 7,850 mm, total width: 2,500 mm, total height: 4,100 mm, loading space length: 5,800 mm, loading space width: 2,450 mm, loading space height: 2,400 mm, Year of construction: 2025, Equipment: AdBlue, air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Sun visor = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 6,871 cc Transmission Gearbox: PowerMatic 08.13 OD, automatic Axle Configuration Tire size: 295/80R22.5 Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steerable Fodpjzr Eakjfx Adrjgf Weights Unladen weight: 10,200 kg Payload: 8,000 kg GVW: 18,200 kg Functional Body brand: Thermo King TX-800 R50 Refrigeration engine: Diesel and electric = Company Information = WE PROVIDE, YOU ACCELERATE. Without boundaries. Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported by comprehensive after-sales services, such as supplying parts and providing (local) training.

Condition: used, functionality: fully functional, mileage: 4,40,056 km, power: 346 kW (470.43 HP), first registration: 04/2023, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GM. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAI, 346 kW (470 hp) output, 2,400 Nm torque, Euro 6e. Gearbox MAN TipMatic 12.26 DD. MAN EfficientRoll gearbox function. Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Road speed limiter, adjustable, limiter (engine speed regulation). Technology MMT infotainment system, Advanced Basic. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Cornering light, LED. Roof spoiler, 600 mm adjustment range. Fjdsztm R Tepfx Adrsgf Side flaps, left folding and right fixed. Tyres Information Front left - 12 mm Front right - 12 mm Rear left inner - 14 mm Rear left outer - 14 mm Rear right inner - 12 mm Rear right outer - 13 mm

Condition: ready for operation (used), Indramat MAC093B-0-GS-4-C/110-B-0/WI522LV permanent magnet motor, serial number: MAC093-32704 + Stegmann DG 1604 2500 pulses/rev rotary encoder, serial number: 330003657, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fgjdpfx Adoi D In Tjrsf

Condition: new, functionality: fully functional, empty load weight: 150 kg, maximum load weight: 600 kg, overall weight: 750 kg, permissible axle load (axle 1): 750 kg, loading space length: 2,305 mm, loading space width: 1,256 mm, loading space height: 1,500 mm, total length: 3,204 mm, total width: 1,685 mm, total height: 1,880 mm, tire size: 155/70 R13, color: blue, trailer brake: trailer unbraked, Year of construction: 2026, Unitrailer Garden 230 TIPPING ALU with H1100 frame and blue cover Fgedpszqumqjfx Adref The UNITRAILER Garden 230 TIPPING with aluminum walls is a practical trailer with a loading area of 230 x 125 cm. It is ideal for anyone who needs a comfortable and versatile transport solution. This model is perfectly suited for tasks around the house, in the garden, on the property, for moving, and for transporting tools, materials, packages, and various equipment for business purposes. H-1100 frame with blue cover – maximum load capacity and cargo protection The 110 cm high frame with a blue cover significantly increases the transport capacity of the TIPPING ALU Garden trailer Garden 230 and creates a high and spacious loading area for larger and bulkier loads. It is ideal for transporting furniture, packages, boxes, garden tools, tools, textiles, or weather-protected materials. The blue cover protects the contents from rain, snow, dust, mud, and wind, while the high construction enables the optimal use of the 230 x 125 cm loading area. Together with the robust aluminum side walls, which reinforce the trailer's construction and are corrosion-resistant, the TIPPING ALU Garden trailer Garden 230 H-1100 is perfect for daily transport around the house, garden, and for business purposes. Aluminum side walls – durability, aesthetics, and ease of use The greatest advantage of this design is the aluminum side walls, which are extremely corrosion-resistant. Aluminum is particularly well-suited for trailers because it is insensitive to moisture, rain, mud, and changing weather conditions. As a result, the side walls retain their attractive appearance for a long time and require minimal maintenance. The aluminum side walls are also easy to clean. After transporting soil, bags, tools, garden tools, or building materials, a quick wipe-down is sufficient to prepare the trailer for the next transport. The smooth surface and modern design give this model a professional look – ideal for private and commercial use. Aluminum side walls are characterized by high rigidity and further strengthen the entire trailer in daily use. Compared to conventional steel side walls, they offer higher stability of the loading area, which is particularly important for frequent transport of tools, garden tools, bags, boxes, or building materials. Stiffer side walls enable even better loading and unloading, while the entire trailer construction remains more compact and resistant to typical operating stresses. As a result, the Garden 230 TIPPING with aluminum side walls combines the durability and robustness necessary for regular use. The trailer is equipped with four floor fastenings, which allow for stable load securing using lashing straps. These straps reduce the risk of the load shifting during transport, thus increasing transport safety and driving comfort. This solution is particularly advantageous when transporting heavy, large, or irregularly shaped loads.

Condition: good (used), mileage: 1,65,805 km, power: 382 kW (519.37 HP), first registration: 01/2024, fuel type: diesel, tire size: 315 / 80 / R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: retarder, color: yellow, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, total length: 5,980 mm, total width: 2,550 mm, total height: 3,900 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, navigation system, parking air conditioner, power mirror, retarder, soot filter, spoiler, General information Number of doors: 2 Cab: GM Cab Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Tyre size: 315 / 80 / R22.5 Make axles: MAN Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: leaf suspension Rear axle: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 60%; Tyre profile left outer: 60%; Tyre profile right outer: 60%; Tyre profile right outer: 60%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.538 kg Carrying capacity: 11.462 kg GVW: 19.000 kg Interior Interior: grey Number of seats: 2 Environment Emission class: Euro 6e Maintenance APK (MOT): tested until 06/2027 History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 3 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Armrest - Baggage cover - Car kit - Hydraulic - Intarder - Low-noise - Particulate filter - Power take-off (PTO) - Radio - Radio, MP3 enabled Fedpfx Adeztwvtorogf - Remote central locking - Speed limiter - Stability control - stand airco - Toolbox - Visor - Webasto - Xenon lighting

Condition: new, Year of construction: 2025, functionality: fully functional, UNIVERSAL IRONWORKER “GEKA” MODEL HYDRACROP 110/180 S Equipped with 5 working stations: Punching Fodpfszq Eldex Adrogf Flat bar cutting Profile cutting Round and square bar cutting Notching 110-ton punching capacity 180-ton angle iron cutting capacity S Version: Machine operated by two hydraulic cylinders Quick-change punch system Flat bar cutting table with adjustable guides Two simultaneous working stations 15 sets of round punches and dies 1 set of oblong punch and die Operating and maintenance manual CE Declaration of Conformity 12-month manufacturer’s warranty