Used Gmatick Gmbh Roll Rack For Foil for sale (76,333)

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. Guodpfx Alsff Huwobsc • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Year of construction: 2025, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C Gujdpfxsff Agie Albsc SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Year of construction: 2025, condition: new, Natural rubber Membrane Rubber sheet membrane In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 Guedpfx Aoi E Hp Tjlbjc temperature range: min. - 20 °/max. +130°C

Condition: used, Year of construction: 2019, functionality: fully functional, Pick-up/discharge unit, pallet roller conveyor/roller conveyor Manufacturer: Rack & Roll Condition: Used Year of manufacture: 2019 Model: Gravity Segment length: approx. 2375 mm Overall width: approx. 1125 mm Roller/conveyor width: approx. 1035 mm Roller/axle spacing: approx. 100 mm and 150 mm Roller diameter: 60 mm Frame: 85/35 mm Material: galvanized steel Up to 2 brake rollers per segment Stock: 20 units Price per unit Gsdjydfuyjpfx Albsuc Internal item number: 2026012602 Features: Condition: fully functional with signs of use Ideal for fast material handling Professionally dismantled and packaged Pick-up address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was in operation until dismantling. Due to the excellent manufacturing quality, your material will glide smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to prepare a customized offer for you or provide technical advice on planning and installation. Simply let us know your requirements and local conditions. Take advantage of our many years of experience and our outstanding network of specialists. We have already successfully completed projects for companies from various sectors, such as logistics, pharmaceuticals, trades, and the electronics industry. Together, we will find cost-effective and sustainable solutions to optimize your workflow and material handling. We can also offer you fully automated sorting systems or complementary components such as picking racks or containers.

Condition: used, Year of construction: 2019, functionality: fully functional, Removal/Feed Unit, Pallet Roller Conveyor/Roller Conveyor Manufacturer: Rack & Roll Condition: Used Year of Manufacture: 2019 Model: Gravity Segment Length: approx. 2395 mm Total Width: approx. 1145 mm Roller/Conveyor Width: approx. 1055 mm Roller/Axle Spacing: approx. 100 mm and 150 mm Roller Diameter: 60 mm Frame: 85/35 mm Material: Galvanized steel Up to 2 brake rollers per segment Stock quantity: 28 units Price per unit Internal Item Number: 2026012601 Features: Condition: Fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Collection Address: Industriestraße 5 (47918 Tönisvorst) Gedjydfugspfx Albouc The conveyor system was in operation until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with an individual quotation or advise you on planning or installation matters. Simply let us know your requirements and site conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, the pharmaceutical industry, trades, and the electronics sector. Together, we will find solutions to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting systems or supplementary components such as order-picking racks or bins.

Condition: used, Year of construction: 2019, functionality: fully functional, Roller Conveyor / Gravity Conveyor / Pallet Roller Conveyor Manufacturer: Rack & Roll Condition: Used Year of manufacture: 2019 Model: Gravity Installation: Consisting of 260.46 meters The system consists of: 30 segments x approx. 2550 mm length 18 segments x approx. 2395 mm length 16 segments x approx. 1445 mm length Stock available: approx. 142.73 meters Total width: approx. 1125 mm Roller width/conveying width: approx. 1035 mm Roller/axle spacing: approx. 150 mm Roller diameter: 60 mm Frame: 85/35 mm 1 to 2 brake rollers per segment installed, 80 mm diameter Gujdoyc H Avjpfx Albjc and 25 segments x approx. 2795 mm length 6 segments x approx. 2400 mm length 28 segments x approx. 1195 mm length Stock available: 117.73 meters Total width: approx. 1145 mm Roller width/conveying width: approx. 1055 mm Roller/axle spacing: approx. 125/150 mm Roller diameter: 60 mm Frame: 85/35 mm Material: Galvanized steel 1 to 2 brake rollers per segment installed, 80 mm diameter Price: per meter Internal item number: 2026012401 Features: Condition: Fully operational, with signs of wear Ideal for fast material handling Professionally dismantled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst) The conveyor system was operational up until dismantling. Thanks to the excellent manufacturing quality, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your expert partner for roller conveyors, belt conveyors, incline conveyors or telescopic conveyors for loading and unloading goods! We are happy to provide a customised quote or assist you with layout or installation inquiries. Just let us know your requirements and onsite conditions. Benefit from our many years of experience and extensive network of specialists. We have successfully implemented projects for companies across a broad range of industries, including logistics, pharmaceuticals, trades, and electronics. Let us work together to develop cost-effective and sustainable ways to optimise your processes and material flow. We can also offer fully automated sorting solutions and complementary components such as picking shelves or bins.

Condition: new, empty load weight: 9,600 kg, Year of construction: 2026, Gas tank semi-trailer for CO2 Carbon dioxide New gas tank semi-trailer for CO2 Carbon dioxide Manufacturer: CRYOBASE GmbH Volume 23 m3 Working pressure 22 bar Pump Tare weight 9600 kg Gsdpeymza Dsfx Albeuc First registration: year 2026 We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: ready for operation (used), Year of construction: 1994, A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible. Gsdpfxjwtg Hwj Albjuc

Condition: refurbished (used), S&F Oscillating Screen | Screening Machine Type ASM-100 reconditioned | refurbished with new bearings (flange bearings) and new vibration elements (rubber buffers) Manufacturer: S&F GmbH Type: ASM-100 Year of manufacture: 2022 Screening capacity: approx. 10 - 12 m³/h (for wood chips, depending on material) Fractions: 3 Screening area: 1.0 m² per screen mesh size Screening decks: 2 pieces Mesh size of the screen: - 1st screening deck: punched perforated plate screen, D = 40 mm or as per agreement Gedpjzbvy Ujfx Albouc - 2nd screening deck: punched perforated plate screen, D = 8 mm or as per agreement Drive power: 1,1 kW, 3 x 400 V, 50 Hz L x W x H: 2,500 x 1,600 x 1,250 mm Design: ECO Line Machine weight: approx. 650 kg Machine colour: RAL 7040 Window Grey // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: refurbished (used), S&F Oscillating Screen | Screening Machine Type ASM-200 reconditioned | refurbished with new screen box, new bearings (flange bearings) and new vibration elements (rubber buffers) Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2004 Screening capacity: approx. 25 m³/h (for wood chips, depending on material) Fractions: 3 Screening area: 2.0 m² per screen mesh size Screening decks: 2 pieces Mesh size of the screen: - 1st screening deck: punched perforated plate screen, D = 40 mm or as per agreement - 2nd screening deck: punched perforated plate screen, D = 8 mm or as per agreement Drive power: 1,5 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Design: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 7040 Window Grey // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Gedpfxozbvy Is Albsuc Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: used, functionality: fully functional, conveyor belt length: 3,050 mm, conveyor belt width: 400 mm, Equipment: type plate available, Belt conveyor/conveyor belt/band conveyor Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt Overall length: approx. 3050 mm Overall width including motor: approx. 560 mm Overall width without motor: approx. 430 mm Conveyor width/belt width: approx. 400 mm Belt type: woven belt Material: steel Frame height: approx. 50 mm Including motor Including 2 adjustable feet Including frequency inverter Stock quantity: 2 units Price per unit Internal article number: 2026051504 Conveyor technology – reliable and immediately ready for use – The offered conveyor technology was in continuous operation until dismantling and is fully functional. Features: • Condition: fully functional, with typical signs of use • Ideal for efficient and fast material transport • Professionally dismantled and packaged for safe transport Collection address: Gedpfx Aloza Eg Isbouc Industriestraße 5, 47918 Tönisvorst Thanks to its high-quality construction, the conveyor technology ensures a smooth and gentle material flow – even under high loads. Tailored solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading – we are your competent partner. We will gladly support you in the planning, design, and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Crafts • Electronics industry Together, we will develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology and complementary systems such as picking shelves or container solutions.

Condition: used, functionality: fully functional, conveyor belt length: 2,560 mm, conveyor belt width: 500 mm, Equipment: type plate available, Belt conveyor/conveyor belt Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt Overall length: approx. 2560 mm Overall width including motor: approx. 660 mm Overall width without motor: approx. 540 mm Conveyor width/belt width: approx. 500 mm Belt type: smooth Material: Steel, aluminum Frame height: approx. 50 mm Including motor Including 2 feet Internal article number: 2026051503 Conveyor technology – reliable and ready for immediate use – The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Features: • Condition: fully functional, with typical signs of use • Ideal for efficient and fast material transport • Professionally dismantled and packaged for safe transport Pick-up address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high load. Tailor-made solutions for your internal logistics Whether roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design, and implementation of individual solutions. Upon request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of specialists. We successfully implement projects for a wide range of industries, including: • Logistics Gedpfx Aljza Ecpebjuc • Pharmaceutical industry • Crafts • Electronics industry Together, we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology and complementary systems such as picking shelves or container solutions.

Condition: used, functionality: fully functional, conveyor belt length: 3,070 mm, conveyor belt width: 400 mm, Equipment: type plate available, Belt conveyor / conveyor belt / band conveyor Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt, SFT/P50 Total length: approx. 3070 mm Total width including motor: approx. 570 mm Total width without motor: approx. 430 mm Conveyor width / belt width: approx. 400 mm Belt type: smooth Material: steel Frame height: approx. 50 mm Including motor: 0.25 kW Including frequency inverter: TFR 600 HG Including 2 adjustable feet Internal article number: 2026051502 Conveyor technology – reliable and ready for immediate use – The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Features: Gjdpfx Asza Dz Djlbsuc • Condition: fully functional, with typical signs of wear • Ideal for efficient and fast material transport • Professionally dismantled and securely packaged for transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Craft industry • Electronics industry Together we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology as well as complementary systems such as picking shelves or container solutions.

Condition: used, functionality: fully functional, conveyor belt length: 2,060 mm, conveyor belt width: 300 mm, Equipment: type plate available, Belt conveyor/conveyor belt/transport belt Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt Overall length: approx. 2060 mm Overall width including motor: approx. 530 mm Overall width without motor: approx. 320 mm Conveyor width/belt width: approx. 300 mm Material: Steel/aluminum Frame height: approx. 50 mm Including motor: 0.25 KW Gujdpfeza Drijx Albec Including frequency inverter: 0.37 KW Including 2 adjustable feet Internal article number: 2026051501 Conveyor technology – reliable and ready for immediate use - The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Features: • Condition: fully functional, with typical signs of wear • Ideal for efficient and rapid material transport • Professionally dismantled and packed for safe transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high load. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry • Craft trades • Electronics industry Together we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology as well as complementary systems such as picking racks or container solutions.

Year of construction: 2019, condition: good (used), Aluminum cylinders with diameters of 140 mm and 90 mm, wall thickness 5 mm; a clamping ring secures the 50 mm shaft stub, which is turned down to 45 mm; shell length: minimum 2720 mm, maximum 2800 mm. 27 pieces of 90 mm diameter cylinders, 6 pieces of 140 mm diameter cylinders. Price applies to the total quantity. Gusdpfx Aljy Nc H Eebec

Condition: as good as new (ex-display), Year of construction: 2026, power: 0.75 kW (1.02 HP), S&F Oscillating Screen | Screening Machine Type ASM-75 Demonstration Machine Make: S&F GmbH Type: ASM-75 Screening capacity: approx. 7 - 10 m³/h (depending on material) Fractions: 3 Guodpfx Alsy Sixtobsc Screening surface: 0,73 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 0,75 kW, 3 x 400 V, 50 Hz L x W x H: 2,000 x 1,100 x 1,100 mm Design: TopLine Machine weight: approx. 600 kg Machine colour: RAL 5015 Sky Blue // Protective housing: RAL 7035 Light Grey Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: as good as new (ex-display), Year of construction: 2026, power: 1.5 kW (2.04 HP), S&F Oscillating Screen | Screening Machine Type ASM-150 Demonstration Machine Make: S&F GmbH Type: ASM-150 Screening capacity: approx. 15 - 25 m³/h (depending on material) Fractions: 3 Screening surface: 1.5 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 1.5 kW, 3 x 400 V, 50 Hz L x W x H: 2,700 x 1,500 x 1,300 mm Design: TopLine Machine weight: approx. 1,200 kg Machine colour: RAL 7043 Traffic Grey B // Protective housing: RAL 3020 Traffic Red Guodpfx Aoy Sixmslbjc Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: new, functionality: fully functional, machine/vehicle number: PKG-F4-WSVC-BASIC, Year of construction: 2024, total length: 500 mm, total height: 400 mm, total width: 500 mm, type of input current: AC, overall weight: 20 kg, input voltage: 230 V, Formlabs Form 4 SLS/Resin 3D Printer – NEW & Original Packaging (Year of Manufacture 2024) incl. comprehensive accessories For sale is our as-new, unused Formlabs Form 4 3D printer, purchased in December 2024. The unit is still in its original packaging and has never been operated. This printer is ideal for high-precision prototypes, functional components, and industrial applications, offering the renowned quality and reliability of Formlabs. 🔧 Scope of delivery (complete & new): - Form 4 Resin Tank - Form 4 Mixer - Form 4 Build Platform Godpfxjy H Eyve Albsuc - Form 4 Finish Kit - Rigid 10K Resin (Form 4) – 2 liters 📌 Condition: - New, unused - Original packaging present - Available immediately 💡 Highlights: - High-resolution industrial 3D printing - Excellent surface finish - Ideal for engineering applications (e.g., with Rigid 10K Resin) - Plug-and-play system 🚚 Miscellaneous: - Inspection/viewing by appointment possible - Shipping or collection available

Condition: used, Separator element for pallet racking system. Suitable for frames with depths of 1000, 1050, and 1100 mm. Arm length: 500 mm For a 2700 mm bay with 6 arms: 24 pcs – 67 EUR + VAT/piece For a 2700 mm bay with 10 arms: 46 pcs – 89 EUR + VAT/piece For an 1800 mm bay with 7 arms: 4 pcs – 51 EUR + VAT/piece If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking and accessories and are happy to assist you with your planning. Further accessories available upon request, including: Frame, corner, and impact protection, push-through protections, chipboard panels, wire mesh decks, rear mesh panels, and depth support bars. Shipping: Please inquire about shipping costs, specifying your postal code, location, and desired quantity. Gsdpjk Tzzlsfx Albsuc Additional services: Planning, racking assembly/disassembly, purchase/sale Technical data, specifications, and prices are subject to change and errors. Subject to prior sale!

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Gsdpfxeurlcre Albjuc Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. Guedpfxjxghngj Albjc These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: like new (used), Year of construction: 2017, S&F Oscillating Screen | Screening Machine Type ASM-200 used (inspected) with inspected bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (for wood pellets, depending on material) Fractions: 2 Gedpfx Asy Aa Ugolbouc Screening area: 2.0 m² per screen mesh size Screening decks: 1 piece Mesh size of the screen: - 1. screening deck: punched perforated plate screen, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz L x W x H: 3,200 x 1,800 x 1,450 mm Model: ECO Line Machine weight: approx. 1,300 kg Machine colour: RAL 3000 Flame Red incl. 1 piece Modular silo type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Outlet height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Item no.: 406.4345 Incl. extension feet L = 1,100 mm Incl. hopper attachment and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: good (used), Used stainless steel container / transport container / IBC Final use: Chemicals Gjdeflrhqopfx Albjuc Tank cleaned and with hazardous goods approval up to 10/22 Item number: 10495 Volume: 500 litres Type: Standing in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall Base: Vaulted Topsoil: Vaulted Operating pressure according to type plate: +0.1 Bar Tank dimensions: total width: 1200mm total length: 1000mm total height: 1000mm materials: Interior: 1.4301 / AISI 304 Exterior parts: Galvanized steel facilities: Nameplate: Yes diameter outlet: approx. 70mm Outlet Type: Disc valve Outlet valve: Yes Manhole cover 400mm with clamping ring

Condition: good (used), Used stainless steel transport container / silo Number of pieces: 17 Item number: 10440 Last use: Unknown Capacity: 650L Type: Standing in galvanized frame Material (wetted parts): 1.4301 / AISI304 Design: Single wall bottom: conical bottom Topsoil: Vaulted Operating pressure according to type plate: ATM Tank dimensions: distance drain to floor: 250mm total height: 1655mm total width: 830mm total length: 1030mm materials: Interior: 1.4301 / AISI 304 Outside: Galvanized steel Gusdpod Sw Dfefx Albsc facilities: Nameplate: yes Discharge: DN80 Outlet valve: Camlock Top panel completely removable

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) Godoxtfv Iopfx Albeuc - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips