Used Guida Slitting Line 1500X 8 for sale (43,242)

Condition: used, Slitting line 1500x 8, made by GUIDA Line composition: - Loading coil car - Uncoiler with sliding base and single expanding mandrel - Pressure arm - Feeding telescopic table with cutting edge and deflecting roll - Entry pinch roll - Crop shear - Tilting table - Mechanical centering device - Calming rolls - Slitting shear - Looping pit equipment (entry and exit saddles + connecting tables) - Felt press - Deflecting rolls - Titling table - Recoiler with single expanding mandrel - Separator arm - Electric equipment - Hydraulic equipment - Safety fences protection - Several tooling and accessories - Spare parts Material to be processed: Hot rolled carbon steel Material tensile strength: 400 N/mm² Coil width max.: 1.500 mm Thickness: 1 - 8 mm Coil weight: 20 Tn Coil inside diameter entry: 500/600 601 + steel spacers for bigger diameter Coil external diameter Entry/Exit: 1.700 mm Slitting shear mandrels diam.: 220 mm Blades diameter: 355 mm Line speed: 50/25 m/min with manual speed change gear Working Direction: From left to right Dodpfx Aoymciaop Deku Power supply tension: 380/50 Hz

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Dsdpjrn Sqhofx Ap Deku Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 625RS10HWPp-D22092022, coil weight: 10,000 kg, feed rate X-axis: 35 m/min, number of straightening rollers: 5, sheet thickness aluminum (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness copper (max.): 2 mm, inner diameter: 508 mm, sheet thickness (max.): 2 mm, outer diameter: 1,250 mm, mandrel diameter: 508 mm, coil width: 1,250 mm, coil outer diameter: 1,250 mm, number of blades: 8, type of input current: three-phase, working width: 1,250 mm, total width: 4,500 mm, total length: 5,700 mm, total height: 1,600 mm, load capacity: 10,000 kg, product width (max.): 1,250 mm, space requirement width: 4,500 mm, space requirement length: 5,700 mm, space requirement height: 1,600 mm, Krasser Centurio SCS-1250 slitting line with a Stolarczyk 10-ton motorized uncoiler For sale: a complete coil-fed sheet metal cutting and slitting line, manufactured by Krasser GmbH (Austria), installed new in January 2023 and used in-house ever since by a sheet metal processing company. Well-maintained, fully operational, and available for inspection while still running at our facility. Krasser Centurio SCS-1250 – slitting/cutting line Max. sheet/coil width: 1,250 mm — min. independent sheet width: 250 mm — min. slitting width: 75 mm between knives Material thickness range: steel (400 N/mm²) 0.4–1.5 mm, stainless steel (550 N/mm²) 0.4–1.0 mm, copper and aluminum 0.5–2 mm Max. cutting speed: 35 m/min Straightening unit: 5 rollers Longitudinal cutting: 6 pairs of slitting knives installed (5 standard + 1 additional pair), max. 8 Cross-cutting: electrically driven guillotine shear Roller-shear unit for partial cross-cuts included Automatic film-application (plastic protective film) unit included Automatic labeling unit included (label printer + applicator) Krasser Optimizer cutting-optimization software included Touchscreen HMI control, multilingual (including Spanish) CE-certified safety fencing Electrical connection: 3-phase 400–488V, 11 kW, 16A Pneumatic connection: 1/2", 6 bar, filtered and dried air, 50 l/min Approx. overall footprint (line + uncoiler): 5.7 m long x 4.5 m wide x 1.6 m high Lifetime production data (as of today): 176,941 m of material processed, 60,610 cross-cuts — machine has been in steady, reliable production use Stolarczyk uncoiling set (motorized, 10 tons) Manufacturer: Spółka Stolarczyk (Poland) — Type RS10HWPp-D, year 2022 Max. coil load: 10,000 kg (10 tons) Dkodpjz D Ivvefx Ap Dsu Hydraulic mandrel expansion — mandrel/coil inner diameter 508–610 mm Max. coil outer diameter: 1,250 mm — coil width: 250–1,250 mm Max. unwinding speed: 30 m/min Coil car included, with hydraulic vertical lift (306 mm) and electric horizontal travel Electrical connection: 400V, 6.5 kW Weight: 3,150 kg The line and uncoiler are sold together as a working unit. Removal/dismantling and logistics to be agreed with the buyer. For technical questions or to arrange a visit, please contact us by email — we're glad to answer any question and share further documentation, photos, or a video of the machine running.

Condition: excellent (used), Year of construction: 2016, operating hours: 90,01,700 h, functionality: fully functional, machine/vehicle number: N/A, PACE MEAT BONING LINE FOR BUTCHERY OPERATION. DOUBLE SIDED PACE BUTCHERY CONVEYOR LINE EXTENDING TO A TRIMMING AND PACKING LINE APPROX LENGTH 28m. SPACE FOR 16 BUTCHERS 8 PER SIDE WITH CENTRAL BONE REMOVAL CONVEYOR . Dkjdpfxoy Uk A Se Ap Deu SPACE FOR BANDSAW AND DERINDER MACHINES WITHIN THE PROCESS. VARIABLE SPEED CONVEYOR TO DICTATE PACE SPEED OF LINE .

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, blade shaft diameter: 240 mm, coil weight: 25,000 kg, type of input current: three-phase, input voltage: 400 V, product width (max.): 1,650 mm, sheet thickness stainless steel (max.): 5 mm, Stainless steel slitting line with NLT slitter-setup-robot — fully functional and in excellent condition. Basic Technical Specifications: - Material: Stainless steel - Material thickness: 0.3–3.5 (5 mm) - Material width: 400–1,650 mm - Line speed: max. 250 m/min. - Coil weight: max. 25 metric tons (unwinding and rewinding) - Coil outer diameter: max. 1,820 mm (unwinding and rewinding) - Coil inner diameter: 508 / 610 mm (rewinding with attachment) - Slitting shaft diameter: 240 mm - Blade diameter: max. 380 mm - Slitter drive: 201 kW - Rewinding recoiler drive: 212 kW Cutting capacity – stainless steel (max.): Thickness 0.3–1.0 mm: 25 strips Dsdpfx Aeztykgjp Deku Thickness 1.0–1.5 mm: 20 strips Thickness 1.5–2.5 mm: 14 strips Thickness 2.5–3.0 mm: 5 strips Thickness 5 mm: 2 strips System consists of: - 4-fold coil magazine - Coil car - Uncoiler with snubber roll – uncoiler movable - Paper winder - Strip edge control - Inserting device with bending roll - Pull-off stand - 5-roll straightening machine - Crop shear with scrap cart - Laminating frame - Slitter - Edge trimmer - 4-position blade changer - NLT slitter-setup-robot PRCS20 - Loop - Braking unit (plate) - Transfer table with separating shaft (automatic) - Recoiler - Coil car - 4-fold turnstile

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Dsdpfx Apjtiy Ntj Doku Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Year of construction: 2020, condition: like new (used), functionality: fully functional, The A.Celli Stream in Line 668 is a complete industrial in-line slitter winder designed for integration into medium- and low-throughput production lines for nonwoven fabrics and composite materials. The machine performs longitudinal web slitting and surface-driven winding of finished rolls. The slitting system uses 12 circular-knife units operating with band counter-knives mounted on a motorized expanding shaft. The configuration includes a motorized S-wrap, a motorized SUS supporting roller, edge-trim extraction, shaft supports, a bar acceleration mechanism and a roll holder. The web is guided through bowed spreader rollers to reduce wrinkles and folds. The machine is equipped with AC drives, a control cabinet, an operator panel, a desktop computer with monitor and industrial communication via Profinet and Ethernet TCP/IP. Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream in Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 Application: Longitudinal slitting and winding of nonwoven fabrics and composite materials Winding design: Surface driven Production speed: 200 m/min Web threading speed: 10 m/min Cross-cutting system: Circular knife Longitudinal slitting system: Band counter-knives on a motorized expanding shaft Number of slitting units: 12 Edge-trim extraction: Yes Number of shafts: 4 Shaft diameter: 3″ Drive system: AC motors Motorized S-wrap: Yes Dkedpfxozudfde Ap Dsu Motorized SUS supporting roller: Yes Shaft supports: Yes Bar acceleration mechanism: Yes Roll holder: Yes Drive side: Left Operator side: Left Control cabinet side: Left Operator panel colour: RAL 7035 Control cabinet colour: RAL 7035 Length: 6200 mm Width: 5550 mm Height: 3045 mm Total weight: 16,000 kg Supply voltage: 400 V Number of phases: 3 Auxiliary AC voltage: 230 V DC control voltage: 24 V Frequency: 50 Hz Power supply earthing system: TN Protection rating of power cabinets: IP55 Electrical reference standard: IEC 60204-1 Cable entry into cabinets: From below PLC communication: Profinet Field communication: Ethernet TCP/IP PLC software: TIA Portal Operator computer: Desktop computer with monitor Compressed-air pressure: 6 bar Air consumption during web threading: 4500 Nl/min Air consumption during normal operation: 700 Nl/min Air consumption during the change cycle: 2000 Nl/min Cable routing: In floor ducts Operating temperature: +15°C to +40°C Storage temperature: +25°C to +55°C Relative humidity: Below 80% Maximum operating altitude: 1000 m Equivalent continuous sound pressure level LEQ: Below 85 dB A-weighted sound power level LWA: Below 83 dB Installed drives: Transmission roller, S-wrap roller, slitting unit, SUS roller, accumulation shaft The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Nr/ 531, We offer this Concept Stal - CS-GPW cut-to-length and slitting line, as new, year of manufacture 2020. Manufacturer: Concept Stal Model: - CS-GPW Year: 2020 Condition: as new Category ID: 1043 Type ID: 1660 Type: Cut-to-length and slitting line If you have any questions or require further information, please send us a message or call us. The line consists of: 1. Sheet steel feeder stand, max coil weight 6000 kg 2. Working module 3. Guillotine 1250 mm 4. Sheet feeding and slitting module (roller blades) 5. Production table (automatic) 6. Product collection trolley 7. Protective film application module Dedpfx Aeyi U Ugsp Deku 8. Hydraulic-electric sheet coiling module 9. Compressor

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. Dkedpfx Aoxwc E Iep Deu The system layout PDF is shown as a mirror image!

Condition: ready for operation (used), Year of construction: 2017, A textile screen printing machine Hebbecker including intermediate dryer and drying tunnel for the complete process is available. 1) Textile carousel screen printing machine Hebbecker S-Line-5-8-4040, year of manufacture: 2017, printing units: 5, stations: 8, max. print dimensions X/Y: 400mm/400mm, plate adjustment: +/-80mm, squeegee length: 410mm, machine diameter: approx. 2900mm, machine height: approx. 1900mm. 2) Infrared conveyor dryer M&R Economax D, year of manufacture: 2017, belt width: 610mm, heating chamber length: 1140mm, cooling system: CoolSkin. 3) Intermediate dryer Hebbecker Magic 25, year of manufacture: 2017. Documentation available. An on-site inspection is possible. Dodpfx Aoy Hvqxjp Deku

Condition: used, Year of construction: 1982, Used cut-to-length line FIMI 1250×0.12-0.8mm x16t with two packing stations (A3793) is coil metal processing line to cut metal into sheets with required sizes. Such machine can be good solution for metal coil processing companies. Manufacturer : FIMI – Italy Year of manufacture : 1982 Revamping : 2008 (SEI SISTEMI) and 2019 (SEI SISTEMI) Ce marking : 2019 Material before processing : Max coil width 1250 x 0.12 Г· 0.80 mm. Uncoiler capacity : 16 Tons. Sheets dimensions : min. 300 x 500 mm. – Max 1250 x 2000 mm. Working speed 0-120 m/min. LIST OF MACHINES COMPOSING THE LINE ➢ STOCKING RAMP FOR 2 COILS ➢ COIL LIFT ON UNCOILER ➢ UNCOILER WITH SECTORS DIAM. 400 AND DIAM. 508 MM. ➢ PINCH-ROLL FOR STRIP FEEDING TO LEVELER ➢ 6HI-LEVELLER WITH INTERCHANGEABLE ROLL BENCHES – 1 BENCH FOR THICKNESS 0.12 ÷ 0.50 MM. – 1 BENCH FOR THICKNESS 0.50 ÷ 0.80 ➢ CONNECTION TABLE BETWEEN LEVELER AND PINCH-ROLL ➢ PINCH-ROLL ➢ DESCENT ROLLWAY IN LOOPING PIT ➢ ASCENT ROLLWAY FROM LOOPING PIT ➢ PINCH-ROLL WITH MOTORIZED ROLLS ➢ STRIP CENTERING DEVICE WITH VERTICAL ROLLS Dkodpfx Aettlfksp Dju ➢ THICKNESS MEASURER TYPE ELECTRONIC KEYBOARD ➢ ROTATING SHEAR ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP ➢ COLLECTION BOX FOR TRIMMING AND DEFECTIVE PARTS OF THE STRIPS ➢ SWIVELLING CONVEYOR TO AVOID SCRAPS AND PARTS OF DEFECTIVE STRIP IN THE FIRST AND SECOND COLLECTION BOXES AND STACK COMPOSITION ➢ CONNECTION ROLLWAY AND SECTION FOR CONVEYING OF SHEETS IN THE THIRD BOX. ➢ 3 STACK UNLOADING SHUTTLES TO CONVEY STACKS TOWARDS THE ROLLWAY ➢ 1 EVACUATION ROLLWAY FOR THE PACKAGING ➢ HYDRAULIC EQUIPMENT FOR ALL THE LINE ➢ INTRODUCTION STRIP OPERATION PULPIT LOCATED AT LINE ENTRY FOR COILS CUTTING ➢ MAIN PULPIT FOR ALL LINE OPERATIONS ➢ OPERATION PULPIT LOCATED AT LINE EXIT ➢ ELECTRICAL CABINET CONTAINING ALL ELECTRICAL/ELECTRONIC COMPONENTS AND PLC ➢ PHOTOCELLS AND SAFETY/PROTECTION BARRIERS.

Condition: good (used), Year of construction: 2000, working width: 900 mm, total width: 1,800 mm, total length: 12,000 mm, total height: 3,550 mm, overall weight: 8,000 kg, For sale: Konig combi bread line 8/7/6/4 rows Includes: - TRO 240 hopper with oiling system - Konig Industrie Rex head machine Model A - Spreading conveyors - Proofing cabinet model: KGV V L Type: (900/500) K8 - V0 - (W) - R - RR900 - SCHN7/B - MO(WB) 1000 - STb8/7/4 - Stamping unit - Long roller - Seed station Dkjdpjxnb Iiefx Ap Dsu - Drop tables (8/7/6/4) (4 different drop tables with various belts included) - Storage trolley for the drop tables - Storage trolley for the flour sprinklers - Spare parts - Control cabinet - All documents and electrical diagrams Weight range: 20 to 30 grams up to 110 grams Output: 18,000 / 24,000 pcs per hour Working width: 900 mm New drum in the Industrie Rex Many spare parts such as spreading belts, etc. It is possible to inspect the line on site. We can carefully load the line onto a truck/container. Do you have comments or questions? Please feel free to contact us. Best regards, Leo Holland

Condition: used, Cut-to-length line Bronx 2050x8mm x35t (A3781) for coil metal cross cutting into sheets of required sizes with different length and width. Thickness Range: 2 – 8 mm Coil Capacity: 35t Coil OD: 2100mm Coil ID: 508mm , 610mm , 762mm Strip Width: 2000mm – 600mm Dkodpfxjq Ulh Hj Ap Dou Sheet Length: 8000mm – 600mm Pack Weight: 10 t Max Line Speed: 60 meters/min Cuts Per Minute: 35 Complete Line With 4 Coil Storage Storage Ramp Coil Loading Car Double Stub Mandrel Uncoiler Sliding Base Hydraulic Expansion Drag Brake Tension Control Peeler / Hold Down Roll 3 Roll Coil Breaker Feed Up Table 7 Roll Backed Up Leveler with Pinch Roll Breaker (9 Rolls Total) Entry Power Pinch Rolls 3 Flights Top & Bottom Back-Up Rolls Entry & Exit Pinch Rolls Marking Unit Measuring Roll Pinch Rolls Bronx Flying Shear AC Die Accelerator Flywheel & Air Clutch and Brake Rack & Pinion Accelerator 35 Cuts per Minute Reject Conveyor Twin Belt Gauging Table Stacker Side Squaring Lift Stacking Tables Photo Cells Drop Type Motorized End Stop Motorized Run Out Conveyor Upgraded AC Motors Upgraded Control Techniques Digital Drives Complete Line

Condition: used, 1. Decoiler Brand : SCHLOEMANN Type : Hydraulic expanding decoiler Function : Coil holding and controlled rotation Expansion control : Hydraulic Frame : Welded steel base with integrated brake Estimated capacity : 8–12 tons Coil bore : Ø 508 mm Dkodpfx Ajw Dd Igjp Dju ----- 🔹 2. Straightener / Pinch Roll Manufacturer : COMEC (Société de Constructions Mécaniques de Creil) Type : Pinch roll and leveler Control : Mechanical Order number : 1305.1268 Recommended lubricants : Shell Macoma, Tellus, Alvania (as per nameplate) Function : Feeds and flattens strip before slitting Secondary role : Synchronized strip puller ----- 🔹 3. Slitter Manufacturer : COMEC Type : Circular blade slitting machine Drive : Mechanical gear train Blade adjustment : Manual Blades installed : ~10 sets (visible) Function : Longitudinal slitting of metal sheets into narrow strips ----- 🔹 4. Shear (End Cropper) Manufacturer : COMEC STAMCO Type : Rotating or inline shear Function : End cropping or final length cut Control panel : Electromechanical (visible on photo) Machine Application Complete line for metal coil slitting, producing narrow strips from master coils, with upstream flattening and final end cutting. Features / Differences – Heavy-duty hydraulic decoiler by SCHLOEMANN – Mechanical straightening section from COMEC – Manual-adjust slitter with circular blades – Outfeed shear for end trimming or final cut-to-length – Older but industrial-grade line, suited for medium gauge materials

Condition: excellent (used), functionality: fully functional, coil weight: 8 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, total width: 1,250 mm, Slitting line for sale Dodpfxev Twi Re Ap Djku

Condition: used, Slitter 650x3 Stainless Steel, made by GUIDA Main characteristics: - Type of products: Stainless Steel (INOX) - Thickness: 0.20 - 3.00 mm - Entry coil width: 20 - 650 mm - Coil maximum weight: 5000 kg - Coil outer diameter: maximum 1560 mm - Coil inner diameter: 400/500/600 mm - Minimum extractable diameter: 510 mm Type of products: Stainless Steel (INOX) Dodpoymciyofx Ap Deku Thickness: 0.20 - 3.00 mm Entry coil width: 20 - 650 mm Coil maximum weight: 5000 kg Coil outer diameter: Max. 1560 mm Coil inner diameter: 400/500/600 mm Minimum extractable diameter: 510 mm

Condition: new, Year of construction: 2026, Automatic Slitting & Cut To Length Line Coil Slitting and Cut To Length Production Line for Sheet Metal Processing The Automatic Slitting & Cut To Length Line is designed for longitudinal slitting and cross cutting of sheet metal coils into strips and flat sheets with programmable lengths. The production line combines several operations in one compact system: Coil feeding Slitting Precision leveling Servo length measuring Cut-to-length part Finished sheet conveying Automatic stacking The machine is suitable for processing galvanized steel, pre-painted steel and other coated sheet materials used in HVAC production, roofing, facade systems, roll forming and general sheet metal fabrication. Main Features Combined slitting and cut-to-length production Fully automatic operation Hydraulic cutting system Precision sheet leveling Servo-controlled length measurement PLC controlled production Touchscreen operator interface High production accuracy Compact machine layout Reliable industrial construction Material Processing Suitable materials include: Galvanized steel (GI) Pre-painted galvanized steel (PPGI) Coated sheet steel The slitting section is equipped with hardened tooling designed for accurate strip production. The slitting system provides accurate strip widths with stable cutting quality during continuous production. The production line is equipped with an automatic hydraulic cut-to-length system. Typical cutting tolerance: ±2.5 mm for sheet lengths up to 5000 mm ±3.0 mm for sheet lengths between 5000 and 10000 mm Drive System The roll forming and feeding system is powered by: Main motor: 4 kW Hydraulic power unit: 3 kW Power transmission: Chain drive Industrial gearbox Heavy-duty mechanical transmission Control System Technical Specifications Parameter Specification Machine Type Automatic Slitting & Cut To Length Line Material GI / PPGI Maximum Coil Width 1000-1250 mm Material Thickness 0.25–0.1 mm Minimum Slitting Width 60 mm Heavy-duty 120 mm shaft diameter Maximum Number of Slitting Knives 5 Production Speed 10–15 m/min Main Motor 4 kW Djdpfx Apezrwhmo Djku Hydraulic Power 3 kW Cutting Accuracy ±2.5 mm (≤5000 mm) / ±3 mm (5000–10000 mm) Cutting Type Hydraulic Cut To Length Transmission Chain Drive Machine Structure Wall Plate Frame + Column Cutting Structure Machine Dimensions Approx. 2500 × 1500 × 1400 mm Electrical Supply 380 V / 50 Hz / 3 Phase The production line is suitable for manufacturing: HVAC duct blanks Ventilation components Roofing sheets Wall cladding panels Roll forming blanks Sheet metal parts Laser cutting blanks Press blanks Electrical cabinet panels Industrial sheet products Advantages Slitting and cut-to-length in one production line Compact machine footprint High processing accuracy Low maintenance requirements Fast production changeover Automatic sheet stacking High productivity Reliable hydraulic cutting Precision leveling Suitable for continuous industrial production Standard Equipment Depending on customer requirements, the production line can be supplied with: Manual decoiler Hydraulic decoiler Double decoiler Coil loading car Protective film laminating unit Different slitting knife configurations Increased material thickness capacity Different coil widths 1.5 m conveyor table 3.0 m automatic stacking system

Condition: good (used), Year of construction: 1995, functionality: fully functional, cutting width (max.): 500 mm, We offer this good REAC 5.609 slitting line with packing line, year of construction 1995. Manufacturer: REAC Model: 5.609 Year of construction: 1995 Condition: good Category ID: 805 Type ID: 1270 Machine type: Slitting line with packing line Dkodpfx Aoznxffep Deu Input strip width: 500 mm Strip thickness: 0.25–2.0 mm Coil weight on the uncoiler: 5,000 kg Coil weight on the recoiler: 2,000 kg Number of slits: 20–25 cuts (0.8 mm strip width) Slitting speed: 150 m/min If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2026, condition: new, High capacity semi-finished coil slitting line available with fast delivery and turnkey configuration. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. FAST DELIVERY ADVANTAGE Semi-finished machine with accelerated delivery possibility Main production stages already completed Delivery within approximately 75 working days Much shorter lead time compared to new production Special opportunity offer This coil slitting line is currently in semi-finished production status, offering an important delivery advantage for companies looking for faster commissioning and reduced lead times. Since critical manufacturing processes and major components are already prepared, the line can be completed and delivered significantly faster compared to a newly manufactured machine. The system is designed for high-capacity production and demanding industrial applications. It ensures stable operation, high slitting precision and reliable performance even under continuous heavy-duty working conditions. TECHNICAL SPECIFICATIONS Material Thickness: 0.3 – 3 mm Coil Width: up to 1500 mm Coil Weight: up to 20 Ton Slitting Speed: up to 40 m/min Slitting Accuracy: ±0.1 mm LINE COMPONENTS Hydraulic decoiler (20 Ton capacity) Hydraulic coil loading car Infeed system with straightener unit Slitting head with precision knife adjustment Scrap winding system Tension unit and separator system Hydraulic recoiler Exit system and automation ENGINEERING FEATURES High precision slitting performance Servo-supported and stable feeding system Robust slitting head with gearbox transmission Adjustable knife system for different slit widths Heavy-duty structure for industrial production Advanced automation system (HMI controlled) OPERATIONAL ADVANTAGES Faster delivery compared to newly manufactured lines Reduced investment waiting time Reliable and stable production Suitable for various materials (steel, aluminum, etc.) Competitive lead time advantage 24/7 after sales support APPLICATION AREAS Steel service centers Dkedpsyzbzrsfx Ap Dou Coil processing facilities Sheet metal manufacturers Automotive and construction industries

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 133/SCS, cutting speed: 35,000 mm/min, working width: 1,250 mm, feed rate X-axis: 35 m/min, product width (max.): 1,250 mm, number of straightening rollers: 7, We are offering a very well-maintained Krasser CENTURIO 1250 stand-alone slitting line, manufactured in 2023, for sale. Highlights Reinforced 7-roll leveling unit Max. coil width 1,250 mm Cutting speed up to 35 m/min Suitable for longitudinal and transverse cutting as well as leveling of strip steel Modern control system with touch operation Very well-maintained condition Ready for immediate use Technical data Manufacturer: Krasser Model: CENTURIO 1250 Type: Stand-alone slitting line Year of manufacture: 2023 Condition: Very good Max. coil width: 1,250 mm Min. coil width: 250 mm Description The Krasser CENTURIO 1250 is a powerful sheet metal cutting system for the precise processing of steel, stainless steel, aluminum, copper, and zinc sheets. The reinforced 7-roll leveling unit is particularly noteworthy, as it enables excellent leveling quality and reliable processing of a wide variety of materials. The system is currently still in operation and can therefore be inspected at any time by appointment while running. This offers interested parties the opportunity to directly verify the condition, performance, and functionality of the machine. The machine is expected to be available in the first quarter of 2027. The exact date may vary slightly depending on the project, but we currently anticipate a release around February 2027. Early reservation or coordination of the delivery date is possible and desirable. Dsdpfxezvgbqo Ap Djku Contact For further information, technical details, or to arrange a viewing appointment, we look forward to receiving your message or call. Category ID: 1052 Type ID: 136 Type: Slitting line

Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) Composition of the line: 1. Stocking ramp 2. Loading cradle 30t 3. Double cone uncoiler 4. Hydraulic peeler table 5. Arm with roll-press roller-bridge structure Dksdpfxstvdy Ie Ap Dju 6. Assembly including pinch-roll and pre-straightener 7. crop shear 8. tilting roller conveyor on pit 9. slitting shear shaft diam. 200mm 10. mobile side guide 11. tensioning rollway 12. side trim rewinder 13. burr crusher 14. recoiler + unloading crandle 30tons. 15. tensioning rollway to leveler 16. unger leveler 17. guillotine flying shear 18. pinch-roll for sheet ejection 19. stacker 20.roller conveyor for stack ejection 12mt. 21 hydraulic control unit 22. electrical equipment 23. tooling

Condition: excellent (used), Year of construction: 2020, operating hours: 97 h, functionality: fully functional, machine/vehicle number: 098 / SCS, # KRASSER Centurio 1250 – Year of Manufacture 2020 – Slitting Line with 5 Automatic Knife Pairs, Leveling Unit, and Guillotine Shear For sale is a very well-maintained KRASSER Centurio 1250 from the year 2020. The machine was taken from an operational business and is in very good, immediately operational condition. It is ideally suited for sheet metal workshops, roofing companies, facade builders, and sheet metal processing companies for the economical processing of coil material. A special advantage: the machine recently underwent a comprehensive service by the manufacturer, Krasser, as part of the take-back process. ## Technical Data Dedozcunaspfx Ap Djku * Manufacturer: KRASSER GmbH, Austria * Type: Centurio 1250 * Year of Manufacture: 2020 * Machine Number: 098 / SCS * Power: 32 kW * Connection: 3 x 400–488 V AC, N + PE, 50–60 Hz * Weight: approx. 3,600 kg ## Equipment * 5 automatic knife pairs * Integrated guillotine shear * Leveling unit * Robust industrial design * High production output * Precise slitting results The KRASSER Centurio 1250 impresses with its high manufacturing quality, reliability, and economy. The extensive equipment enables efficient and precise processing of coil material while simultaneously reducing setup times. The machine is immediately available and ready for sale. Inspection is possible by appointment.

Condition: new, Year of construction: 2026, PLC-controlled, compact slitting and cross-cutting line for thin sheet metal, designed for industrial cutting, and boasting very high quality. PLC control with touchscreen – the quantity and section length are programmed. Maximum sheet width: 1,250 mm Cutting performance for sheet thicknesses ranging from 0.5 mm to 1.2 mm, using SJ235JR steel sheet with a tensile strength of 360 N/mm², with three sets of slitting knife pairs. The slitting unit is an autonomous module. For quick adjustment of the rotary knife pairs, the slitting unit can be easily pulled out or pushed in. Alignment unit with eight hardened and ground alignment rollers. Adjustment of the lower alignment rollers is motorized. Rubber-coated feed rollers – this allows for the processing of coated sheets as well. Slitting shear with 3 to 5 knife pairs. Smallest strip width: 200 mm Maximum cutting speed: 20 m/min Very fast, mechanically guided cross-cutting shear for absolutely clean, burr-free cuts. Dsdpez Ei D Refx Ap Doku Voltage: 3 x 400 volts – fuse rating: 25 amps – total drive power: 5 kW Dimensions, excluding the outfeed table, approximately 3 m x 1.9 m x H 1.8 m Weight, approximately 2,800 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Storti Nailing Line GSI/150-AL2 – pallet line The Storti GSI/150-AL2 pallet nailing line is designed for efficient pallet production. This robust industrial machine is suitable for automated pallet assembly, offering reliable performance and increased production capacity. Dkodpfx Apozgayuj Dsu Holtec Variocut VC-SHKA-HPI – cut-to-length saw / optimization line This industrial machine is designed for precise and efficient wood cutting. It is suitable for woodworking operations requiring reliable performance, high output, and accurate material cutting.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Dkedeyzxyxspfx Ap Dsu Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871