Used Haas Tr160 With Sigma 5 for sale (59,316)

Year of construction: 2016, condition: ready for operation (used), Control Unit Brand HAAS Model Sigma 5 Main Drive Number of axis 2 Fgedpjx H Uz Njfx Aa Neb This HAAS TR160 with Sigma 5 was manufactured in 2016. It features a 2-axis table and is equipped with a Sigma 5 servo motor, ensuring precise and efficient operation. Ideal for those looking to enhance their machining capabilities. Contact us for more information. Application Types Other Machine Tools

Condition: good (used), Transport shots, crane shot -Spare part: from a machining center, manufacturer Sigma, type Mission 5 -Hole: Ø 140 mm -Recess opening: Ø 80 mm -Bolt circle: Ø 110 mm Fjdpocnf E Ujfx Aa Nsgb -Quantity: 4 pieces available -Price: complete -Weight: 23 kg

Condition: good (used), Year of construction: 2007, Traverses X Y Z: 1270 x 660 x 635mm, Fjdpfx Aajy Eyaus Njgb Table 1321 x 584mm, Spindle Speed 0 – 7500rpm, Spindle taper BT 40, Spindle Motor 20Hp, HAAS Control, 20 Station tool change, coolant

Condition: ready for operation (used), Year of construction: 2010, operating hours: 13,000 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,000 rpm, Haas VF5/40XT milling machine from late 2010. The machine is connected and operational—ready for work, following the replacement of the X-axis ballscrew. Plexiglass door guards and side covers have been replaced with new ones. Calibration was performed using a Renishaw Ballbar; with further leveling and configuration, even higher precision can be achieved. The machine can be inspected, tested, etc. Purchase including transport, installation, training, leveling, and configuration is possible for an additional fee. Loading for transport is included in the machine price. Spindle taper: ISO40 Tool magazine: 40 tools Through-spindle coolant Rigid tapping Macros Auger chip conveyor Spindle orientation Fgsdpfey D Enhsx Aa Nob X 1524 mm, Y 660 mm, Z 635 mm—the X-axis is extended in the XT series.

Condition: used, Year of construction: 2012, x-travel 2134 mm y-travel 1016 mm z-travel 762 mm CNC-control HAAS CNC Table dimensions 2134 x 914 mm max. table load 1814 kg spindle taper SK 50 spindle turning speed range 7500 U/min Fodpfx Aaox E Dn Ns Nsgb spindle motor 22,4 kW feed range 1270 mm/min rapid traverse 15,2 m/min tool change unit 30 Pos. coolant IKZ voltage 400 V weight of the machine ca. 13,2 t dimensions of the machine ca. 4,70 x 2,95 x 2,99 m - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR

Condition: used, Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 685 mm, total height: 3,030 mm, total length: 4,280 mm, total width: 2,860 mm, table width: 680 mm, table length: 1,400 mm, overall weight: 8,000 kg, Equipment: chip conveyor, documentation/manual, - CE marking available: Yes Fgsdpfey D Ndajx Aa Nsb - CE certificate available: No - Control: CNC - Control system brand: Heidenhain - Control system type: 426-M - Number of axes [pcs]: 3 - X-axis travel [mm]: 1250 - Y-axis travel [mm]: 600 - Z-axis travel [mm]: 685 - Table length [mm]: 1400 - Table width [mm]: 680 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 12000 - Transport dimensions: 2860mm x 4280mm x 3030mm (w x l x h) - Transport weight [kg]: 8000kg - Cooling system: External cooling + external air blast + internal coolant supply (IKZ) - Tool holder: SK40 - Magazine positions: 21 Special feature: Unresolved fault in tool magazine VAT: The stated price is subject to VAT You are welcome to inspect the machine, it is under power. Sale is only to commercial customers, with exclusion of any warranty (sold as seen). Dismantling, collection, and transport are to be arranged by the buyer. A 10-ton overhead crane is available on site. All company names and trademarks are the property of their respective owners and are used for identification and descriptive purposes only. Deviations from technical data and errors in the item description may occur and are reserved.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 3,283 h, This 3-axis HAAS VF-5/50XT was manufactured in 2012, designed for robust vertical machining. It operates on a voltage of 360/480, with a 3-phase power supply and a frequency range of 50/60 Hz. The machine handles a full load of 45 amps and a largest load of 70 amps. If you are looking to get high-quality milling capabilities, consider the HAAS VF-5/50XT machine we have for sale. Contact us for more information. Fsdpsyabubefx Aa Negb • Voltage: 360/480 • Phase: 3 • Hertz: 50/60 • Full Load: 45 Amps • Largest Load: 70 Amps • Short Circuit Interrupting Capacity: 10000 Amps • Short Circuit Current: 5000 Amps RMS Symmetrical • Wiring Diagram: C5 02843283 operating hoursVertical machining center with travels of 1,524 × 660 × 635 mmSK-50 spindle head with gearbox30 hp vector drive (22.4 kW), 7,500 rpm,Tool changer with 30+1 magazine positions,X-axis rapid traverse up to 540 ipm (13.7 m/min),Y- and Z-axis rapid traverse up to 710 ipm (18.0 m/min),Portable color control panel,Programmed coolant nozzle,Automatic chip conveyor system (spiral),1 MB program memory,15" color LCD screen,USB port,Key switch for program locks,Synchronized tapping, and a 95-gallon (360-liter) continuous cooling system Coolant nsformer mounted in a floor-standing enclosure, IP 23Transformer completely vacuum resin impregnatedConnection to screw terminals via cable glandsCoolant supply through the spindle, 69 bar, with additional coolant filter m 4 – 4AXDDrive and wiring for the 4th m 5 – CSMDHVControl simulator module (230 V) with dual software

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY €130,000!!! This price is valid only until March 21, 2026! Don’t miss your chance! We invite you to purchase a BRAND NEW, EXCEPTIONAL 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. The presented machining center is suited for processing: - Wood - Wood-based materials - Aluminum Fedpfeyn Ri Rex Aa Nsgb - Plastics - Composites - Materials of similar hardness (CORIAN, DIBOND, MDF, HPL, HIMAX, etc.) The offered model is the latest SIGMA, which comes in a high-specification configuration. The machine is absolutely new, and the attached specification provides a detailed overview of its features, parameters, and production capabilities. FANUM products are widely recognized for their reliability, precision, strong performance, and operating speed. The MACHINING CENTER we offer is COMPLETELY NEW. It was purchased from FANUM Sp. z o.o. in 2021 and delivered directly to our facility by the manufacturer. The FANUM Sp. z o.o. service team performed commissioning only; the machine has not been operated and is essentially in factory-new condition. Our model comes exceptionally well equipped, offering practically every feature you may require. Currently, a new unit of this type retails for approximately €282,350 net (PLN 1,200,000 net). We have direct contact and support from FANUM Sp. z o.o. Another start-up inspection and demonstration can be arranged at our site. We can also arrange transport to the new owner and have the machine installed and commissioned at the destination site. The listed price refers to the machine itself; installation and commissioning at the destination can also be included in a separate quotation. We believe the discount we offer—over 40% (over €117,640 net, approximately PLN 500,000 net) off the new machine price—makes this an extremely attractive deal for anyone seeking such equipment or for buyers who didn’t anticipate that their budget would allow them to acquire a brand-new, modern, high-efficiency machining center. General notes regarding the sales offer: • Although the machine is NEW, it was manufactured in 2021, and we do not offer any guarantee or warranty; • The machine is non-returnable; • The advertised price is exclusive of VAT (23% applies to Polish buyers); VAT will be added to the invoice—please consult the advert for pricing details; • Single owner. * Price in EUR calculated according to NBP exchange rate: 1 EUR = 4.25 PLN. Welcome to all users of the MACHINESEEKER platform. We are new MACHINESEEKER users. We are not a furniture, production, or machinery trading company. We own numerous real estate assets in Poland and are a developer of houses and apartments in Warsaw, the capital city. All machines offered are our property. We obtained them as settlements with our tenants from the furniture industry. We know both their history and condition, consistent with our descriptions. We remain in touch with machine manufacturers (Homag, Otto Martin, OMC Machinery, FANUM) who can provide additional assistance. As we do not require these machines, our pricing is highly attractive—especially since the equipment is virtually unused. We can assist with transportation anywhere in Poland or the EU. Inspections of the machines before purchase are welcome. Best regards.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 1111074, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table length: 1,575 mm, spindle speed (max.): 7,500 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,524 mm Travel Y-axis: 660 mm Travel Z-axis: 635 mm Table size: 1,575 x 584 mm Spindle speed: 7,500 rpm Spindle taper: CAT40 Fgjdpfxsyf E D Re Aa Nsb MACHINE DETAILS Control: Haas Motor power: 30 HP EQUIPMENT 20-position tool changer (ATC)

Condition: used, Year of construction: 2014, Traverses X Y Z 1524 x 660 x 635mm, Table size 1575 x 584 mm, Spindle speed 7,500rpm, Fsdpfx Aoydvhkja Njgb Spindle taper CAT40, Motor 30HP, Haas control, 20 station ATC

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105876, SPECIFICATION Table size 914mm x 356mm Maximum table load 1316Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0 -8,100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 + 1 tools Tool to toll time 2.8 seconds Fedpfx Aaex Sq Sbs Nogb Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Manual Feed cutting time 11,436 hours

Condition: new, Vertical stainless steel storage tank, diameter 2,5 m height 6m with 4 legs, manhole, agitator, 10,6 kW motor, air filter... Fjdpfx Asik Hd Ioa Njgb

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1105842, SPECIFICATION Table size 914mm x 356mm Maximum table load 1361Kg X axis traverse 762mm Y axis traverse 406mm Z axis traverse 508mm Spindle BT40 Spindle speeds 0-8100rpm Spindle motor 14.9kW Rapid feed rate 25.4m/min Toolchanger capacity 24 +1 tools Tool to tool time 2.8 seconds Approximate weight 3500Kg MACHINE EQUIPPED WITH: - Haas TRT 160 5 axis trunnion table (Removable) Wireless intuitive probing system Remote jog handle Swarf auger High speed machining Programmable coolant nozzle Lighting Guarding Fgedpfx Aajykqtze Neb Manual

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 1,250 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,200 mm, total length: 3,510 mm, total width: 3,700 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,400 kg, overall weight: 10,000 kg, CNC Vertical Machining Center SIGMA Leader 5 - IN NEED OF REPAIR - Year of manufacture: 2004 - Control: iTNC 530 - Usable work area: 1400 x 700 mm - Travel paths: X 1250 mm / Y 810 mm / Z 630 mm - Max. feed rate: 40,000 mm/min - Electronic handwheel - Heidenhain probe - Through-spindle cooling 30 bar - Extraction system - Tool measurement Renishaw prepared - Magazine with 50 positions Purchase price in 2004: EUR 230,000.00 Defects: - Main spindle motor failure (electrical – likely winding burnt out) - Power supply unit for control system UV 101B defective Fgodpfx Aaoxlg Uco Neb - LT module 2x50A defective Net price without dismantling and unloaded, ex works Luckenwalde (Germany), without transport

Condition: good (used), Year of construction: 2008, HAAS VF-5D / 40 MACHINING CENTER TRAVELS : X : 1,270 mm Y : 660 mm Z : 635 mm DISTANCE BETWEEN PLANE – TABLE AND SPINDLE NOSE : 178 – 813 mm TABLE : DIMENSIONS : 1,321 x 584 mm LOAD CAPACITY : 1,815 mm NUMBER AND SIZE X PITCH OF T-SLOTTS : 7.14 X 80 mm SPINDLE : ROTATIONAL SPEED : 8,000 RPM SPEED RANGES : 2 SPINDLE NOSE : ISO 40 HIGH PRESSURE / INTERNAL COOLANT FEEDS : RAPID SPEED : 18,000 mm / min. WORKING SPEED : 12,700 mm / min. JOG : 0 – 1,260 mm / min. TOOL MAGAZINE : 24 POSITIONS POWER : 15 KW Fgodpfx Aaevf Nw Ds Nsb WEIGHT : KG. 7,000 YEAR OF FIRST INSTALLATION : 2008

Condition: used, Year of construction: 2010, functionality: fully functional, HAAS VF6 5 AXIS WHEEL MACHINE CNC MACHINE £45K PLUS VAT This machine is set up for the five axis machining of automotive wheels. Extra Z height machine to allow full use of 5 axis 2010 machine. Fsdpfx Aaox U Earj Nsgb 10k spindle side mount tool changer High speed machining enabled Networking enabled. we can set up the machine if required.

Condition: used, Year of construction: 2021, operating hours: 1,556 h, 2021 | Kubota U50-5 with 3 excavator buckets | Used Mini Excavator < 7t | 1556 hours Fgedey Rrxyepfx Aa Njb 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 37100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 64 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine worked well during the inspection. It has low hours and has been very well maintained. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39892 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), mileage: 4,76,184 km, power: 272 kW (369.82 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2014, Equipment: AdBlue, air conditioning, central locking, cruise control, fog lights, onboard computer, soot filter, = Further options and accessories = Fodsy Hq A Aspfx Aa Negb - Front work lights - Heated mirrors - Windscreen - Enclosed cab - Cab - Air suspension - Particulate filter - PTO (power take-off) = Remarks = Volvo FM370 6x2*4 – HIAB X-Hiduo 188 E-5 Crane with remote control – Euro 6 MY: 23-10-2014 KM: 476184 YV2X922C1EA768827 HIAB Crane with remote control Rear steering axle Euro 6 I-Shift Sideboards = Further Information = Transmission Transmission: I-Shift, 12-speed, automatic Axle Configuration Front axle: Tyre size: 385/55R22.5; Max. axle load: 9,000 kg; Steered; Left tyre tread: 40%; Right tyre tread: 40% Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 11,500 kg; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Rear axle 2: Tyre size: 385/55R22.5; Max. axle load: 7,500 kg; Steered; Left tread: 50%; Right tread: 50% Weights Unladen weight: 14,363 kg Payload: 13,636 kg Gross vehicle weight: 27,999 kg Functional Details Body manufacturer: HIAB X-Hiduo 188 E-5 Condition Technical condition: good Visual condition: good

Condition: used, Year of construction: 2012, Operational condition machines. Ask for specification and details. 2 units available! Fjdpfsywi Apex Aa Njgb

Condition: good (used), mileage: 4,76,184 km, power: 272 kW (369.82 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2014, Equipment: AdBlue, air conditioning, central locking, cruise control, fog lights, onboard computer, soot filter, = Additional Options and Accessories = - Front work lights - Heated mirrors - Windscreen - Enclosed cab - Cab - Air suspension - Particulate filter - PTO (power take-off) = Notes = Volvo FM370 6x2*4 - HIAB X-Hiduo 188 E-5 Crane with remote control - Euro 6 Year: 23-10-2014 Mileage: 476,184 km VIN: YV2X922C1EA768827 HIAB crane with remote control Rear steering axle Euro 6 I-Shift Sideboards Nor-Slep - 3 axle - Sideboards - Year: 21-12-2011 VIN: YY9SL28PX1P011791 Box dimensions: 775 x 247 x 88 cm 3 axles 28,000 kg GVW = Further Information = Transmission Transmission: I-Shift, 12 gears, automatic Axle Configuration Front axle: Tire size: 385/55R22.5; Max axle load: 9,000 kg; Steered; Tire tread left: 40%; Tire tread right: 40% Fgodsyx U Adepfx Aa Nob Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max axle load: 11,500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50% Rear axle 2: Tire size: 385/55R22.5; Max axle load: 7,500 kg; Steered; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 14,363 kg Payload: 13,636 kg Gross vehicle weight: 27,999 kg Functionality Body make: HIAB X-Hiduo 188 E-5 Condition Technical condition: good Visual condition: good

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY EUR 130,000!!! This price is valid only until March 21, 2026! Take advantage of this opportunity! We invite you to purchase a NEW and exceptional 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. We are offering the new SIGMA model, which is exceptionally well-equipped. The machine is completely new, and the attached specification details all functions, parameters, and production capabilities. FANUM has been recognized for years for its reliability, accuracy, high performance, and fast processing speed. The MACHINING CENTER offered is BRAND NEW. It was purchased from FANUM Sp. z o.o. in 2021 and delivered to our facility directly by the manufacturer. The FANUM Sp. z o.o. service team only performed initial commissioning and the machine has not been used since. Its condition is as NEW. Our model is extremely well-equipped and offers practically everything required. A comparable new unit currently costs approximately EUR 282,350 net (PLN 1,200,000 net). We maintain direct contact with, and support from, the manufacturer, FANUM Sp. z o.o. An additional commissioning and demonstration can be arranged at our facility. It is also possible to organize transportation to the new owner’s location and to have FANUM's engineers install and start up the machine at the installation site. Fedpfxjyn Rpwj Aa Njgb The proposed price includes the machine itself, but we can also provide an offer with installation and commissioning at the new location. With a discount exceeding 40% (over EUR 117,640 net, approx. PLN 500,000 net) off the new purchase price, this is an extremely attractive opportunity for anyone looking to expand their production fleet with a similar machine or who did not anticipate acquiring a modern, new, and highly efficient MACHINING CENTER within their planned budget. General terms of sale: • Although the machine is NEW, it was manufactured in 2021 and we do not offer any guarantee or warranty; • Returns are not accepted; • The price shown does not include VAT (23% for buyers in Poland), which will be added to the invoice—please check the price in the listing; • Single ownership. * Price in EUR calculated based on NBP exchange rate: 1 EUR = 4.25 PLN. A warm welcome to all users of the MACHINESEEKER platform. We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery dealer. We own numerous properties in Poland and are a developer of houses and apartments in Warsaw, the capital of Poland. The machines offered for sale are our property, acquired through settlements with tenants from the furniture industry. We are familiar with the machines’ history and condition, verified as per our descriptions. We are in direct contact with manufacturers who can provide additional support—Homag, Otto Martin, OMC Machinery, and FANUM. Since we do not require these machines, our prices are highly attractive, especially given their condition is virtually new. We can assist with transportation anywhere in Poland or the EU. Inspections before purchase are welcome. Best regards.

Condition: good (used), Direct from large Supermarket owned vegetable factory. Inline tray washer with dryer. High throughput system. Fedpfx Aou Ixt Dea Nogb

Condition: excellent (used), HAAS TR310 TRUNNION TABLE EXELENT CONDITION TESTED CAN BE SHOWN WORKING Fgsdenp Iyhspfx Aa Nsb

Condition: excellent (used), HAAS TR160H trunnion table Dual-Axis Trunnion (Tilting & Rotating) Plug-and-play for Haas machines Applications: Ideal for complex 3+2 and full 5-axis machining. Clamping rotary table diameter 160 mm Fodpfx Aajy Nchio Negb

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: Haas, controller model: Haas, table width: 350 mm, table length: 915 mm, overall weight: 3,500 kg, For sale: 1 used vertical machining center Manufacturer: Haas / Mikron Model: VF2 / VCE750 Year of manufacture: 05/1995 Technical specifications: Control system: HAAS Table length: 914 mm Table width: 350 mm Maximum spindle speed (vertical): 7,500 rpm Fgedpfx Aasy Hta Rs Neb X-axis travel: 750 mm Y-axis travel: 400 mm Z-axis travel: 500 mm Taper: SK 40 Total number of tools: 20 Includes the tools shown in the photos, two computers (one presumably for CAM), as well as programming and operating manuals. The machine can be inspected at our warehouse in 09599 Freiberg.