Used Haco Ppm 36100 for sale (266)

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 91.898, functionality: fully functional, pressing force: 100 t, stroke length: 120 mm, throat depth: 250 mm, controller model: HACO ATL 565, working width: 3,600 mm, TECHNICAL DETAILS Press force: 100 t Max. working width: 3,600 mm Frame spacing: 3,300 mm Overhang: 250 mm Max. stroke: 120 mm Back gauge depth: 600 mm Crowning system: Mechanical MACHINE DETAILS Drive system: CNC Control system: HACO ATL 565 Number of axes: 3 (Y1 + Y2 + X) Dimensions & Weight Dimensions (L x W x H): 4,800 x 1,800 x 2,250 mm Weight: 8,200 kg Transport packages: 2 EQUIPMENT Mechanical crowning system Quick-release die holder Tool holder in European style Tools CE marking Ijdpfxozxdxxe Ahnoig

Condition: used, Year of construction: 1997, Press Brake HACO type PPM 36100 Command: ATL 550 Capacity: 3150 mm x 100 T Electric Back gear gauge travel: 800 mm Slide travel: 120 mm Year of construction: 1997 Throat depth: 250 mm Distance between uprights: 3150 mm Working Length: 3600 mm Motor power: 5,5 kW Voltage: 380 V Equipped with 2 multi V 90 x 90 mm - length 3660 mm + some tools (see photo) Dimensions (L x W x H): 3900 x 1600 x 2300 mm Weight: approx 8 T Iodezwcmfepfx Ahneig

Condition: good (used), Year of construction: 1999, pressure 135 t chamfer lenght 3600 mm distance between columns 3150 mm stroke of upper beam 200 mm ajustment speed 70.0 mm/sec Iijdsz Dkznspfx Ahnsg working feed 10.0 mm/sec return speed 80.0 mm/sec 315 bar dayligth 400 mm table height 915 mm column arm 250 mm engine output 15.0 kW weight 8800 kg range L-W-H 4200 x 1700 x 2600 mm Equipment: - Electro-hydraulic press brake * with torsion bar - HACO NC control (Model ATL 550) for X and Y axes * Computer-controlled multi-axis NC press * Backgauge position pre-selection (electric backgauge) * Backgauge retraction for Z-bends * Bending depth pre-selection * Electric depth adjustment * Memory for 200 programs - Swiveling control panel (front left) - NC motorized backgauge (X-axis) * with 2 manually adjustable stop fingers - NC motorized depth adjustment (Y-axis) - 1x set of sectionalized "gooseneck" (swan-neck) upper tools - 1x rotatable MULTI-V die block - Rear safety guard (sliding door) - 1x mobile two-hand/foot control unit - 2x front support arms (custom-made) - Operating manual

Condition: used, Year of construction: 2002, machine/vehicle number: 81511, functionality: fully functional, overall weight: 25,000 kg, bending force (max.): 225 t, control type: CNC control, Equipment: european tool clamping system, Used HACO press brake ERMS432225, year of manufacture 2002, serial no. 81511 Ijdpfsyml D Tjx Ahnjig

Condition: reconditioned (used), Year of construction: 2004, functionality: fully functional, working width: 2,500 mm, bending force (max.): 75 t, Refurbished machine Haco press brake, PPM type, 2.5m x 75T Control with + and - buttons Motorized back gauge, X-axis European standard type punches Iodpfx Aexanm Aohnsig One-piece die

Condition: ready for operation (used), Year of construction: 2002, pressure 200 t chamfer lenght 3100 mm distance between columns 2550 mm stroke of upper beam 200 mm throat 300 mm dayligth 440 mm working feed 9.0 mm/sec return speed 80.0 mm/sec 265 bar Control konv. work height max. 965 mm total power requirement 15.0 kW weight 10500 kg range L-W-H 3360 x 1750 x 2800 mm - in checked conditions - machinevideo - ?v=EcmvsA4AGfo Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) Ijdpfsyu U A Uex Ahnoig * Torsion shaft for parallelism - Electro-motorized backgauge (X axis) * with handwheel for fine adjustment * on recirculating ball screws * 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal V-die block, reversible * with anti-corrosion grease * V openings in mm : 12/35/25 50 10/20/16/16 75 * Dimensions of the block in mm : 100 x 100 - 1x 1V die (continuous) - V opening in mm : 100 - various / further bending tools - 1x free-moving 2-hand/foot control - Operating instructions (PDF)

Condition: used, Year of construction: 1992, gebraucht 1992 090174 Belgien 17800 € 1 3050 mm 6 mm Iisdpfx Aheyi Hpponsg 11 - 25 1/min 0.5 - 3 ° 18 750 mm 11 kW 3850 mm 1750 mm 1720 mm 4600 kg 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 2002, pressing force: 14 t, number of axes: 2, Press brake manufactured in 2002. This HACO PPM 30135 b features a pressing force of 135 tons and a bending length of 3100 mm. It is equipped with a power of 15 kW, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the HACO PPM 30135 b machine we have for sale. Contact us for further details. • Power: 15 kW • Voltage: 380 V • Serial number: 90 695 • Control: Conventional CNC/NC press brake • Condition: In working condition Technical Specification Iodsy Nc D Depfx Ahneig Bending Length 3100 mm

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 83888, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 150 t, distance table to ram: 3,150 mm, total length: 4,100 mm, total height: 2,500 mm, overall weight: 8,500 kg, Equipment: CE marking, documentation/manual, HACO ERM 36150 (83888) Technical condition: New Bending length: 3600 mm Tonnage: 150T Type of press brake: Synchronized Back gauge: Y1 + Y2 + X CNC controlled, R-axis manual Back gauge length: 800 mm Crowning: Yes (manual) Daylight opening: 400 mm Control system: EASYBEND 2D Motor power: 15.0 kW, 400V Tooling: Yes, multiple sets of bending tools Tooling standard: European standard Total length: 4100 mm Total depth: 1700 mm Total height: 2500 mm Weight: 8500 kg Serial number: 83888 Iedpezxgrbofx Ahnsig Delivery and installation at your location are possible; delivery costs and any additional charges will be discussed.

Condition: used, functionality: unexamined, Year of construction: 2007, control type: PLC-controlled, working width: 3,000 mm, cutting angle (max.): 3 °, sheet thickness brass (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, overall weight: 8,500 kg, SP8 control system capacity 3000 x 12 mm power 22.5 kW electric stops weight 8500 kg Iiedpfx Aoznvgmehneg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: 21780, control type: CNC control, actuation type: hydraulic, back gauge: 750 mm, overall weight: 4,500 kg, total length: 3,800 mm, total width: 1,650 mm, total height: 1,750 mm, number of support arms: 1, warranty duration: 12 months, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HACO HSLX 3006 in new condition Equipped with a new set of blades and a new control system. Technical condition: Excellent Capacity for regular steel: 6 mm (400 N/mm2) Length of back gauge: 750 mm Control system: SC 101 (NEW) Max. cutting angle: 3.0° Number of clamps: 18 Strokes per minute at smallest angle: 14 Iedpfx Ahezxgu Nsnsig Strokes per minute at largest angle: 8 Working height: 770 mm Motor power: 7.5 kW Total length: 3800 mm Total height: 1750 mm Total width: 1650 mm Total width with CE guarding: 2700 mm Weight approx. 4500 kg Year of construction: 2010 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed.

Condition: refurbished (used), Year of construction: 2007, machine/vehicle number: 82885, functionality: fully functional, power: 15 kW (20.39 HP), pressing force: 135 t, stroke length: 200 mm, total length: 3,500 mm, total width: 1,700 mm, total height: 2,500 mm, overall weight: 7,800 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HACO ERM 30135 (82885) Completely rebuilt, including a new control system. Technical condition: As new. Bending length: 3100 mm Tonnage: 135 tons Type of press brake: Synchronized Back gauge: Y1 + Y2 + X CNC controlled, R-axis manual Back gauge length: 800 mm Crowning: Yes (manual) Throat depth: 400 mm Overhang: 250 mm Stroke: 200 mm Control system: ATS 595 Motor power: 15.0 kW, 400V Tooling: Yes, multiple sets of bending tools Tooling standard: European standard Year of manufacture: 2007 Overall length: 3500 mm Overall depth: 1700 mm Overall height: 2500 mm Ijdpfx Ahjzxgrhensig Delivery and installation at your location are possible; delivery costs and any additional charges will be discussed separately.

Condition: used, Year of construction: 1998, machine/vehicle number: 40225, functionality: fully functional, bending force (max.): 225 t, control type: CNC control, actuation type: hydraulic, Hydraulic CNC press brake from the brand HACO, model 40225, year of manufacture 1998. The machine has a nominal pressing force of approx. 225 tons and a working width of approx. 4,000 mm. Equipped with CNC control and electric backgauge, suitable for precise bending of steel and other sheet materials. Features European tool clamping system. Suitable for heavy-duty sheet metal processing in an industrial environment. The machine is offered in used condition. Isdpjyhxtujfx Ahnjig

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, controller manufacturer: Robosoft, controller model: PC90, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 14 1/min, sheet thickness (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, back gauge: 1,000 mm, overall weight: 8,500 kg, total length: 4,100 mm, total width: 2,400 mm, total height: 2,300 mm, Maximum sheet thickness: 12mm Max. cutting length: 3100mm Strokes on full length: 7mm Strokes in short 1000 length: 14 Cutting angle: 0,5 - 3° Length backgauge: 0 - 1000mm Number of down holders: 18 Operated mechanical or hydraulic:Hydraulic Power: 24kW Length: 4100mm Iisdpfozvf Hrex Ahneg Width: 2400mm Height: 2300mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1989, functionality: fully functional, overall weight: 50,000 kg, working width: 8,000 mm, bending force (max.): 400 t, control type: CNC control, Eccentric press from HACO, model PPES 70400, year of manufacture 1989. The machine has a nominal pressing force of approx. 400 tons and is suitable for various pressing and forming operations on sheet material. Equipped with a mechanical eccentric drive and robust construction, designed for industrial use. Suitable for production and assembly work in an industrial environment. Machine is offered in used condition. Iodjyhxtzepfx Ahneig

Condition: used, Year of construction: 2011, total length: 3,800 mm, total width: 2,000 mm, total height: 1,900 mm, Colour: Grey Weight: 6.000 kg - Year: 2011 - Documentation available: Yes Ijdpfxey Nk S Aj Ahnoig - CE marking present: Yes - CE certificate present: No - Serial number: 22106 - Drive system: Teach-in - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 22 - Backgauge depth [mm]: 1000 - Options: Digital readout - Transport dimensions: 3800mm x 2000mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), functionality: fully functional, back gauge: 750 mm, overall weight: 3,500 kg, total length: 2,800 mm, total width: 1,900 mm, total height: 1,660 mm, number of support arms: 3, year of last overhaul: 2019, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HACO TS 2006 in very good condition Working length: 2050 mm Capacity in regular steel: 6 mm (400 N/mm²) Length of back gauge: 750 mm Control: SP-9 motorized back gauge with digital display Blade gap: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of clamps: 18 Iiodpfx Aozxgupjhnjg Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side gauge 1500 mm including ball bearings Equipped with a sheet support device: No Working height: 770 mm Motor power: 7.5 kW Total length: approx. 2800 mm Total height: approx. 1660 mm Total width: 1905 mm Weight approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed.

Condition: like new (used), Year of construction: 2007, machine/vehicle number: 82885, functionality: fully functional, HACO ERM 30135 (82885) Completely rebuilt, including a new control system. Technical condition: As new. Bending length: 3100 mm Tonnage: 135 tons Type of press brake: Synchronized Back gauge: Y1 + Y2 + X, CNC-controlled, R-axis manual Back gauge length: 800 mm Iedpfxozrdhmj Ahnsig Crowning: Yes (manual) Throat depth: 400 mm Overhang: 250 mm Stroke: 200 mm Control system: ATS 595 Motor power: 15.0 kW, 400V Tooling: Yes, multiple sets of bending tools Tooling standard: European standard Year of manufacture: 2007 Overall length: 3500 mm Overall depth: 1700 mm Overall height: 2500 mm

Condition: used, Year of construction: 1991, machine/vehicle number: 91033420, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, year of last overhaul: 2020, working width: 3,050 mm, We offer this used HACO TS 3006 guillotine shear and press brake, manufactured in 1991. Manufacturer: HACO Type: TS 3006 Year of manufacture: 1991 Voltage: 380 V Capacity: 3050 x 6 Serial number: 91033420 Ijdpfezdzh Usx Ahnoig Electric length stop Sale exclusively to businesses, with exclusion of any warranty, guarantee, return or conversion, to the extent permitted by law. The machine is sold in its current condition ("as is"). Information regarding technical data, condition, operating hours, accessories and possible applications is provided to the best of our knowledge, but without any guarantee of completeness or accuracy. The buyer is responsible for transport, installation, commissioning, maintenance, compliance with all safety regulations and legal requirements, as well as the intended use of the machine. Any claims arising from product liability, manufacturer's warranties or services are subject exclusively to the terms and conditions of the respective manufacturer. The transfer of risk occurs upon collection of the machine (EXW). If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, HACO TS 2006 in very good condition Working length: 2050 mm Capacity (mild steel): 6 mm (400 N/MM²) Backgauge length: 750 mm Control: SP-9 motorized backgauge with digital readout Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 18 Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side stop 1500 mm with ball rollers included Equipped with support system: No Working height: 770 mm Motor power: 7.5 KW Total length: approx. 2800 mm Total height: approx. 1660 mm Total width: 1905 mm Weight: approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location is possible, with delivery and additional costs to be discussed. Since 2019, we have been the official Dutch dealer for HACO press brakes and guillotine shears. In addition to sheet metal machinery sales, we offer a complete package of services for maintenance and repairs. Iiedpfx Ahoxpm Iqenjg

Condition: new, functionality: fully functional, Year of construction: 2010, overall weight: 4,500 kg, HACO HSLX 3006 in new condition Equipped with a new set of blades and a new control system. Technical condition: Excellent Capacity for regular steel: 6 mm (400 N/mm2) Length of back gauge: 750 mm Control system: SC 101 (NEW) Max. cutting angle: 3.0° Number of clamps: 18 Strokes per minute at the smallest angle: 14 Strokes per minute at the largest angle: 8 Working height: 770 mm Motor power: 7.5 kW Total length: 3800 mm Total height: 1750 mm Total width: 1650 mm Total width with CE guarding: 2700 mm Weight approx. 4500 kg Year of manufacture: 2010 Iedpfxjzrgf Us Ahnsig Delivery and installation at your location are, of course, possible; delivery costs and any additional charges will be agreed upon. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to the sale of sheet metal processing machines, we offer a complete package for service, maintenance, and repairs.

Condition: ready for operation (used), Year of construction: 2014, pressure 40.0 t chamfer lenght 1600 mm distance between columns 1100 mm Iiodpfx Aey Nd Tyohnog stroke of upper beam 100 mm throat 195 mm working feed 10.0 mm/sec return speed 70.0 mm/sec 180 bar work height max. 840 mm table width 110 mm dayligth 295 mm Control ATS 585 total power requirement 5.5 kW weight 2500 kg range L-W-H 2100 x 1200 x 1800 mm - in checked conditions - machinevideo - ?v=l9CdurfDGb0 Features: - NC-controlled hydraulic press brake - with ATLANTIC NC control "ATS 585" * Rear stop positioning (X-axis) * Depth adjustment positioning (Y1, Y2 axes) * Ability to program various programs * Swiveling control panel, front left * Tool and program library - NC electric-motor-driven material/backgauge (X-axis) * With 2 stop fingers, manually adjustable (R and Z axes) - Tool holder system A - with upper wedge camber - Split insert/bending tools - DSP LASER "RX" safety device - front - 2x side, swiveling safety doors - 1x freely movable double foot control - Operating instructions Also included in the scope of delivery (pre-installed): - 1x brand-new / split set of upper tools * UKB 11,200 mm - 2x 835 mm * Angle 85° - Radius R 0.8 mm - Height 66.5 mm * Load capacity 1000 kN/m max - 1x brand-new / split set of lower tooling * UKB 21.207 - 2x 835 mm * V-openings = 16/22/35/50 mm * Angle 85° * Load capacity 800 kN/m max.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2004, working width: 2,500 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 2,500 mm, Refurbished machine HACO hydraulic guillotine shear, TS 2.5m x 6mm model New SP9 control system Retractable rear stop with 820mm stroke New, four-edged blades made of stainless steel Iijdezp U H Ujpfx Ahnjg

Condition: like new (used), 2 unused blades for guillotine shear to standard quality → sold as used. Length = 3150 mm Width 1 = 66.5 mm Width 2 = 68.5 mm Thickness = 19 mm Iijdpfez Aybkex Ahnsg Through holes, D = 10 mm All further data can be found in the attached drawing.

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Iedpfx Ahsyapdqsnsig Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling