Used Hans Schoen Ute Ff 300 for sale (17,874)

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Ram: 1800x1000mm Hjdpjgbvkvofx Aahju Stroke: 600mm Weight: 43 tons Height: 4700mm Siemens S7 control Floorstanding Sick lightguards Die cushion: 200mm stroke

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Hsdpfx Aastiwgijhou Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Hodpox Ehlcefx Aaheu

Year of construction: 1976, condition: used, pressure 100 t distance between columns 625 mm stroke 150 mm table surface area 580x450 mm ram surface 580x340 mm hole in the table Ø 150 mm table height 850 mm tool hole in ram Ø 45 mm column travel -side 200x200 mm weight of the machine ca. ca. 6,0 t Hodpelp U Eujfx Aaheu dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Hodpfx Aolmmwrsaheu

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm stroke 150 mm ram surface 320 mm table surface area 470x400 mm weight of the machine ca. 12 t Hjdelp Uz Ujpfx Aahsu dimensions of the machine ca. 2000x2000x2700 mm

Year of construction: 1976, condition: used, pressure 250 t distance between columns 900 mm stroke 300 mm Hodpfx Aaolp U A Sjhsu table surface area 850x900 mm ram surface 800x880 mm stroke 300 mm table height 1050 mm

Condition: used, Double-column hydraulic press SCHÖN, type UTE 100 Special Special press with additional side press cylinders – vertical and horizontal, each with 100 tons capacity. Machine no. 1800, year of construction 1977 Rebuilt according to UVV standards in 09/1991 by Livenbrück Vertical pressure force: 100 tons Vertical ram stroke: 150 mm Vertical installation height: 375 mm (400 mm) Horizontal pressure force: 100 tons Hodsz A R Iropfx Aahou Horizontal ram stroke: 60 mm Horizontal installation width: 600 mm Table surface: 600 x 480 mm Table opening: Ø 100 mm Ram surface: Ø 200 mm (vertical and horizontal) Piston rod: Ø approx. 240 mm (vertical and horizontal) Clamping pin bore: Ø 50 mm Ram stroke: 150 mm Installation height: max. 435 mm Table height above floor: 820 mm Oil tank capacity: approx. 375 liters Motor power: 15 kW Mains connection: 400 volts, 50 Hz - Column guidance via the large piston with anti-rotation device - Stepless press force adjustment - Adjustable pressure holding time for vertical and horizontal - Switching for working movement: vertical only or combined vertical and horizontal - 2-hand operation for stroke release - Control cabinet located on the side, fixed to the machine - Light curtain SICK, type LVU 306, for safety operation Space required for the press L x W x H: 2050 x 1550 x 2230 mm Weight: approx. 5 tons Good condition

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Hodpfx Ajv Srfwoahsu Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 4079, functionality: fully functional, power: 7.5 kW (10.20 HP), pressing force: 30 t, stroke length: 500 mm, table width: 1,200 mm, table length: 1,000 mm, table height: 850 mm, ram plate width: 600 mm, ram plate length: 400 mm, distance table to ram: 800 mm, oil tank capacity: 400 l, total length: 2,200 mm, total width: 2,400 mm, total height: 3,500 mm, overall weight: 4,000 kg, year of last overhaul: 2023, Equipment: CE marking, safety light barrier, For sale is a hydraulic double-column press. Manufacturer: Hans Schoen, Type: NH/D 30S. Hedpfxszzd Rge Aahou The machine is in perfect working order and can be inspected while powered on.

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Hodpfxozvfp Ho Aaheu Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW

Condition: used, Year of construction: 1978, pressure 7 t throat 180 mm stroke 100 mm table surface area 300x300 mm ram surface Ø105 mm hole in the table Ø60 mm table height 1050 mm tool hole in ram Ø30 mm total power requirement kW Hodpfx Aaevnwfbeheu dimensions of the machine ca. BxTxH 1200x1200x2100 mm

Condition: used, Year of construction: 1980, pressure 20 t distance between columns 450 mm Hjdpfx Aovnwd Dsaheu stroke 100 mm table surface area 440x320 mm ram surface Ø140 mm hole in the table Ø50 mm table height 900 mm tool hole in ram Ø40 mm total power requirement 3 kW weight of the machine ca. 2 t dimensions of the machine ca. BxTxH 1400x1200x2200 mm

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with a capacity of 650 kN. It was last used approximately 8 years ago. At that time, the machine had a problem with a hydraulic hose (possibly a broken hydraulic hose or a leaking connection). Hedpfx Aaex Ehmyshju This was not repaired because the press was no longer needed. Otherwise, the machine operated perfectly until the last use. The press does not have a valid safety inspection certificate.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area Hsdjx Ry Nyjpfx Aahou • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Condition: good (used), Year of construction: 1994, Arburg Thermonic Hodpfszl Sbnjx Aahju Temperature controller (model SI FF 10 G250/300) The device features an analog rotary knob for setting the target temperature in Celsius and Fahrenheit (range 50°C to 450°C), as well as three LED displays for monitoring the temperature deviation.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 16 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, clearance between the columns: 500 mm, oil tank capacity: 60 l, total length: 1,040 mm, total width: 1,030 mm, total height: 2,000 mm, 16 ton hydraulic press for sale in good condition HANS SCHOEN TES 16 two-column hydraulic press Year of manufacture: 1986 Hsdpfxezf Ilcs Aahsu Pressing force 160 kN motor power: 3kw 380v 50Hz two-hand operation Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm Machine dimensions: height: 200cm width: 103cm length: 104cm weight: 1000kg.

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Hedpfx Asu Nfmyeahou Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, cutting height (max.): 100 mm, cutting width (max.): 1,140 mm, saw blade diameter: 300 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 7,000 rpm, total length: 1,700 mm, total width: 1,130 mm, total height: 1,100 mm, overall weight: 400 kg, Equipment: CE marking, documentation/manual, saw blade guard, Professional panel saw SICAR SEGA 300, manufactured in 2022. The machine is equipped with a 1600 mm long aluminum panel carriage, a scoring saw, and a tilting saw unit. The robust construction, based on a cast iron table and a heavy-duty saw unit, ensures stable operation and high cutting precision. The saw is designed for processing solid wood, furniture boards, MDF, plywood, and other wood-based materials. TECHNICAL DATA: - Manufacturer: SICAR / MA.CO.2L - Model: SEGA 300 - Year of manufacture: 2022 - Panel carriage length: 1600 mm - Carriage dimensions: 1600 × 315 mm - Main saw blade diameter: 300 mm - Main saw blade arbor diameter: 30 mm - Scoring saw diameter: 90 mm - Scoring saw arbor diameter: 22 mm - Main saw blade speed: 4500 rpm - Scoring saw speed: 7000 rpm - Maximum cutting height at 90°: 100 mm - Maximum cutting height at 45°: 75 mm Hjdpfx Aozxw N Rjahju - Saw unit tilting range: 0–45° - Maximum cutting width with parallel guide: 1140 mm - Main work table dimensions: 800 × 500 mm - Auxiliary table dimensions: 800 × 860 mm - Auxiliary side table dimensions: 400 × 500 mm - Main motor power: 4.0 kW / approx. 5.5 HP - Power supply: 380 V, 3 phases - Frequency: 50 Hz - Machine weight: 380 kg - CE marking EQUIPMENT: - aluminum panel carriage running on ball bearings - scoring saw unit with belt drive - manual lifting and tilting of the saw using knobs - parallel guide on a steel shaft - cast iron guide bracket with micrometer adjustment - extendable crossbeam - cross guide with two reversible stops - saw blade guard with extraction port - emergency stop switch - complete set of auxiliary tables as shown in the pictures The machine is in very good visual condition. Compact and robust panel saw suitable for both a carpentry workshop and the production of custom-made furniture. The machine is available immediately. It is possible to start and inspect it before purchase. We offer assistance with loading and the possibility of arranging transport throughout Poland and abroad. JBS WOODWORKING MACHINERY Sale of used and new woodworking machines. It is possible to view the machine in operation by prior appointment. It is possible to test the machine on site. Financing options are available through leasing or installment plans. WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition Hedpfx Asr I E Iteahsu

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation Hedpsyz Dr Tefx Aahsu - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Year of construction: 1997, functionality: fully functional, Fully functional wire brush grinding machine. Hsdpfx Aajznzbveheu

Condition: refurbished (used), Year of construction: 1997, machine/vehicle number: 4290, functionality: fully functional, pressing force: 30 t, stroke length: 300 mm, table width: 440 mm, table length: 320 mm, total height: 2,750 mm, Fully refurbished Schoen double-column press, manufactured in 1997/2025. Press force: 300 kN Hjdpfxjy Uv T Ao Aahsu Installation height: 500 mm Stroke: 300 mm Table: W x D 440 x 320 mm Machine will be fully refurbished: - new control system - new light curtain - hydraulic system overhaul.

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Hjdpfx Aasvw Spmshju Year of manufacture 1979/2025 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table width: 440 mm Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics

Condition: used, Demonstration machine Hans Schreiner - metal lathe, 3-jaw chuck 315mm, 4-jaw faceplate 320mm, clamping disc 430mm, drive plate 250mm, steady rest, ride-on rest, magnetic brake, switchable automatically and with foot operation, coolant system, halogen lamp, splash guard, chip tray can be pulled out to the front, fixed punch, roller punch MK5 removable bed, hardened and ground Hodpfsvrvvaex Aahju bed and gear wheels without oil filling incl. Multifix Set B and 3-axis digital display Technical data: Centre height 300 mm Centre width 2000 mm max. turning diameter 600 mm spindle mount Camlock 8 hollow spindle 80 mm tailstock taper MK5 spindle speed 24 to 1600 rpm Speeds 15 Main motor output 7.5 kW Max. diameter over cross slide 350 mm Max. turning diameter in the bridge 680 mm Longitudinal feed 0.07 - 4 mm/revolution Cross feed 0.02 - 1.35 mm/revolution Metric thread 0.5 - 28 mm pitch Inch thread 56 - 1 threads/inch Module thread module 0.5 - 3.5 Thread diametric pitch 56 - 8 Quill diameter/travel 65/120 mm Weight 2200 kg